Detect break off DB connection
Hi
I am using Labview 7.1, LabSQl and MySQL.
Is there a way to detect the break off in the database connection in the event case while my program is performing other tests?
Clement
Normal operation procedure is to open and close the connection every time
you communicate with the database. If you work like that, you will get an
error if it is not possible to establish a connection. In any case, you'll
receive an error if the connection is broken, and you can act on that, for
instance by popping up a message, logging the error, or storing the failed
query in a buffer to retry later.
Regards,
Wiebe.
Similar Messages
-
I bought the S5 less than two months ago through Verizon, not Amazon. One of the selling points is that the phone is water and dust resistant. The USB port comes with a little flap plug attached to the phone by a rubber or plastic pin. To charge the phone, this plug is pulled aside, then replaced after charging. In less than two months, the plug attachment broke. Calls to Verizon resulted in the following: They told me I needed to contact Samsung directly. I told them that I did not buy the phone from Samsung. They agreed to call Samsung directly while I was on hold. When they came back on, they told that Samsung said that this problem was phone damage and not manufacturer defect. The fix would be done at my cost. Verizon said that they would change me $300 if I sent the phone back to them.
I don't believe this dust cover is critical to the enjoyment of the phone, but it is discouraging to think that Samsung should sell a phone for $600 with such a manufacturer defect, and that Verizon refused to go to bat for a customer.Did you look at your own link? It's not available yet. I don't know how to state that more clearly. If it was available, I would have said, "I was also concerned about that flimsy cover breaking off so I purchased a Samsung QI charging cover for my phone. That way I don't have to mess with the USB port cover." But it's not available yet so I said I'm impatiently waiting for it to be released.
And before you get all excited and tell me how stupid I am, most of the items on your link are for the S3, S4, and Note 3. Those are entirely different phones. The only S5-specific QI products available now are 3rd party units that are held in place with tape and look pretty hokey. -
How do I disable Spotify Connect?
If I've got my tablet (iPad) running the app, I definitely don't want my phone running it and draining the battery with the app running there as well.
Thanks
Edit by
I've just added a guide on ways of disabling Spotify Connect. Hopefully there will be a way of enabling/disabling the service at will in the future.
How to disable Spotify Connect
MODERATOR EDIT:
Hey everyone, Spotify staff here. Recently we updated the Community Idea "Make Spotify Connect a choice" with the status "Not Right Now".
If you've installed our latest Spotify app for Android (1.8.0) and you're still having trouble with battery drain please let us know right here.
We'd also like to mention these other Connect ideas which are a bit more specific to the Connectrequests you've made in this thread. Please leave your kudos and feedback in those as well if they apply to the reasons you'd like to turn off Spotify Connect.
[Spotify Connect] Less pop-ups when I change devices
[Spotify Connect] Don’t automatically synchronize what i am playing across devices
[Spotify Connect] Add access control on my Connect devices
If you don't see the idea you'd like to see, please feel free to make a new idea and post a link in this thread. We're keeping a close eye on your feedback and we're actively bringing it back to the right teams.Hi... I have a problem with this as well - I find it incredibly annoying. For example, I was out picking up a pizza and listening to spotify in my car... When I got home my girlfriend began listening to Spotify on her cell phone - and my cell phone began playing music from it because my device was the last selected. If at all possible, I'd like there to be a feature to turn this option OFF entirely. I can't see it being logical to have this on by default. I enjoyed the option that stopped my device from playing completely when someone else was using the same account from another machine, hopefully you can bring this back because it totally makes more sense than the way it is now.
I don't like the ability with anyone who has access to the account to be able to play music on any device that has the app open as well. This can be quite embarrassing if someone accidentally clicks on your device, say, as you go into a meeting with your phone in your pocket and it begins playing "It's raining men" or something... I hope you can understand my sentiment! Again this can be fixed if you just gave us an option to turn this off entirely for any (or all) device(s). -
Nokia Lumia 2520 Shut off after connected to keybo...
Hello all,
I have a Lumia 2520 tablet which I've had for about 4 months now. I initially purchased one of the power keyboards with my tablet which worked great at first. Then the tablet stopped responding to tkeyboard. I sent in the tablet for repairs and it was returned with a status "Not broken" or something like that. The tablet still wouldn't respond to the keyboard, though. thinking that the problem was most likely teh keyboard, I purchased another keyboard. (I really wanted the red one anyway).
At first, the tablet and keyboard was working just fine. But two weeks later, the tablet started shutting off when connected to keyboard. So here's the basic scenario. If my tablet is docked in the keyboard, I won't turn on. I've attempted to hold the power button down forcing a full shutdown, and then turn it on, but that doesn't work either. If I remove the tablet from the keyboard, it still doesn't turn on. But if I hold down the power button for approx 15 seconds, and then try to turn it on, it comes on without any problems. Now, if I re-dock the tablet with the keyboard, it immediately shutdown. As if it's going to sleep. But once again, will not turn back on unless I repeat the remove and holding down the power button.
Is this a problem with the tablet, or the keyboard.
Please help.
thanks!!
SteveYardi Systems supporter of Microsoft and creates program to run on IE. One such program is called Payscan. It allows users to scan Invoices and post into the system. After posting the image of such invoices are abailable for view, for that Yardi prompts to install GPI to view images. However Microsoft does not allow to run such programs in my Windows RT tablet. Is there a work around? The image could be exported as PDF and opened using Adobe, which is a waste of time and space constraints
-
I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How can i be sure that i am not being charged for roaming?
Make sure data roaming and cellular data is turned off. If you don't want to receive calls or SMS then put your phone in airplane mode and reactivate WiFi
-
iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro
Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!
-
TNS-12518: TNS:listener could not hand off client connection
All,
I am getting the below error while connecting the db from client.it is a shared server and also have enough free memory.
The db version is : 9.2.0.6
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNSrotocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
Please suggest me on this to avoid the issue.When was last time SQL*Net worked?
What changed since then?
Solaris Error: 32: Broken pipeError occurs at Operating System level & Oracle is the victim.
What clues exist in the messages file? -
Hi,
Trying to connect to a remote database which worked in 10.1.3 developer preview gives now:
Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
From sqlplus I can connect. I don't have access to the remote database server/configuration. I tried the workarounds specified here
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=139775.1
I deleted
ojdbc14dms.jar ojdbc14.jar
from jdeveloper and copied ojdbc14_g.jar from Oracle 10g release1 (renamed it to ojdbc14.jar). Then it worked.Hi,
Can you please check the below link from the forum too.
ORA-12518 Tns: Listener could not hand off client conenction
Best regards,
Rafi.
http://rafioracledba.blogspot.com -
ORA-12518: TNS:listener could not hand off client connection
guys,
i have a problem here with the connection between a client host and a server database, using a new non-default listener LISTENER_BKP_1. The error showed is:
ORA-12518: TNS:listener could not hand off client connection
i had learned about this error here before, and i toke some notes as follows:
h2. listener.log
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-SEP-2009 01:23:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_2\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_2\network\log\listener_bkp_1.log
Trace information written to C:\oracle\product\10.2.0\db_2\network\trace\listener_bkp_1.trc
Trace level is currently 0
Started with pid=2212
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WINXP)(PORT=1523)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-SEP-2009 01:24:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=PAULO))(COMMAND=services)(ARGUMENTS=64)(SERVICE=listener_bkp_1)(VERSION=169869568)) * services * 0
25-SEP-2009 01:24:49 * (CONNECT_DATA=(SERVICE_NAME=financeira.winxp)(CID=(PROGRAM=C:\ORACLE?instantclient_10_2\sqlplus.exe)(HOST=PAULO_NOTEBOOK)(USER=ORACLE_DBA))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=51649)) * establish * financeira.winxp * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-SEP-2009 01:24:53 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=PAULO))(COMMAND=services)(ARGUMENTS=64)(SERVICE=listener_bkp_1)(VERSION=169869568)) * services * 0
h2. lsnrctl services
C:\>lsnrctl services listener_bkp_1
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-SEP-2009 01:33:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=WINXP)(PORT=1523)))
Services Summary...
Service "FINANCEIRA.WINXP" has 1 instance(s).
Instance "FINANCEI", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:1
LOCAL SERVER
The command completed successfully
h2. listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = FINANCEIRA.WINXP)
(SID_NAME = FINANCEI)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WINXP)(PORT = 1521))
SID_LIST_LISTENER_BKP_1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = FINANCEIRA.WINXP)
(SID_NAME = FINANCEI)
LISTENER_BKP_1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WINXP)(PORT = 1523))
h2. v$resource_limit
RESOURCE_NAME ; CURRENT_UTILIZATION ; MAX_UTILIZATION ; INITIAL_ALLOCATION ; LIMIT_VALUE
processes ; 26 ; 30 ; 150; 150
sessions ; 30 ; 35 ; 170 ; 170
2 rows selected
this means that it didn't reach the resource limites yet. What i can do to solve the problem ???
another important information is that connecting by the default listener LISTENER instead of the LISTENER_BKP_1 listener, the connection is completed successfully. There's enough SGA memory space too.
Tks,Paulo_BR wrote:
i have a problem here with the connection between a client host and a server database, using a new non-default listener LISTENER_BKP_1. The error showed is:
ORA-12518: TNS:listener could not hand off client connectionDon't do Oracle on Windows, so I'm not sure how the following relates to the Listener dealing with a dedicated server connection request on Linux/Unix.
On Linux/Unix, a dedicated server request means just that - a dedicated process has to be started to service that client. The Listener does it by using the parameters of the configured listener.ora service to execute +$ORACLE_HOME/bin/oracle+. This process then starts up, and the Listener hands off the client connection for this process for servicing.
If there is a failure somewhere on this series of steps fail, the Listener throws the ORA-12518 exception. For example, the +$ORACLE_HOME+ has been incorrectly configured in listener.ora and it fails to execute and startup a dedicated server process.
And this relates to the underlying error you are seeing:
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directoryI think that the Listener on Windows uses the CreateRemoteThread() Win32 call to start up the server process thread. However, it needs a valid process identifier (of the existing Oracle instance) for this call - and thus needs to first identify the Oracle instance process. Could be that this step uses a ORACLE_HOME reference. And if that directory path is not valid, it is unable to identify the process id of the Oracle instance and thus unable to spawn a dedicated thread to service that client. -
Hi again,
I'm on my enterprise management console and Database Instance and Listener shows the green arrow, but the Agent Connection to Instance shows a red downward arrow and the error:
Status: Failed
Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)
My OraClrAgnt service is up and running (using winxp pro, oracle 11gR2), I'm on my home pc, all my ports are open (my machine's name is "abigail" and it is dmzhost)
Any suggestions to resolve this error?
My Tnsnames ora:
ABIGAIL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.0.0.10)
LISTENER_ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL)
RMAN =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rman.abigail)
My listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\abigail
My SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES, LOCALHOST)
NAMES.TRACE_LEVEL = ADMIN
My alert file
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>10-OCT-2013 20:47:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=SYSTEM))(SERVICE_NAME=orcl.0.0.10)) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=38289)) * establish * orcl.0.0.10 * 12518
</txt>
</msg>
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
</txt>
</msg>
My listener status and services
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 10-OCT-2013 22:47:58
Uptime 0 days 0 hr. 2 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l
istener.ora
Listener Log File e:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale
rt\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
The command completed successfully
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
Handler(s):
"D006" established:0 refused:0 current:0 max:800 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1312>
(ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1060))
"D005" established:0 refused:12 current:0 max:800 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1288>
(ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1061))
"D004" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1260>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1063))
"D003" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1140>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1062))
"D002" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 140>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1059))
"D001" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 1072>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1057))
"D000" established:0 refused:1 current:1 max:16383 state:ready
DISPATCHER <machine: ABIGAIL, pid: 748>
(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1058))
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfullyI added this on my listener.ora
DIRECT_HANDOFF_TTC_LISTENER=OFF
Works now!
Moral of the story, google is ur friend lol. Thanks for the reply tho! -
TNS:listener could not hand off client connection
while trying to select from dblink I got ORA-12518: TNS:listener could not hand off client connection
What should I do?
here is the listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = disater)(PORT = 1521))
)What is the operating system and database version for remote and local machines.
Are you using dedicated or threaded server on the remoted DB. More information is needed.
output from error message search:-
12518, 00000, "TNS:listener could not hand off client connection"
// *Cause: The process of handing off a client connection to another process
// failed.
// *Action: Turn on listener tracing and re-execute the operation. Verify
// that the listener and database instance are properly configured for
// direct handoff. If problem persists, call Oracle Support.
// *Comment: The problem can be worked around by configuring dispatcher(s)
// to specifically handle the desired presentation(s), and connecting
// directly to the dispatcher, bypassing the listener. -
Can i turn the Laptop screen off while connecting the TV?
Dear All,
I am connecting my Mac to TV 32'' via mini display port converted to HDMI.
I am using it on MAC OS X 10.6.6, and on Windows 7 Ultimate SP1 also.
when i am connecting my TV, the 2 screens are on, Laptop screen and TV screen.
Can i turn the Laptop screen off while connecting the TV?
how to do this on both operating systems?
Thanks & Regards,
Boudy,The quick answer is, hook up the tv to the computer, close the lid, then wake the computer up by clicking the mouse while the lid is closed. Not sure if it'll work while running windows, but I'd bet it does if you have the mac drivers installed on the win os.
-
Initiate a dial-up connection or detect whether I am connected to the net
I want to initiate a dial-up connection from my java program and also to detect whether I am connected to the internet or not.
well I am developing a proxy server and I want to add
a feature of dial-up demand that detects the current
connection status and if not connected to the net then
call the dial-up dialers in dial-up networking folder
and then connects to the internetI'd say it works like I wrote earlier:
Keep yourself in the proxy-server the connections-status.
If your proxy-server runs on a normal PC, it should be enough to try to connect to the internet.
But do you need control over multiple dial-up dialers etc., this probably isn't enough.
If I can find the time, I'll look into it.
Maybe direct access to the modem is also an option.
That depends on the modem of course and then you probably also need additional scripting. I guess that's not what you're looking for, but if you need info on that, it's probably also an option to look at a wvdial-script on Linux for connection to the internet. It might also be a problem if you have multiple channels for connecting onto the internet (cable,phone,ASDL etc.) -
Error in Detect Break event.vi
Hey friend,
As you can see i have just opened an example detect break event.vi.
The error is"Wite class conflict".
Please help me on this.
I have a program which uses thisVI.that program is showing the warning
" This VI needs a driver or toolkit component that is not found. Missing resource file "visarc"."
please help me on this.
Solved!
Go to Solution.
Attachments:
detect break.pdf 65 KByes i have NI-VISA . .
I am using 8.6 verision of LAbview -
How do you detect url redirects when connecting to a URL
how do you detect url redirects when connecting to a URL?
Thanks in advance
stevHai
(i) If it a jsp we can get the URL by request object.
Like
String url = request.getHeader("Referer");
u can do it in Servlet aslo by request object variable.
If this explanation is not ok, Explain ur doubt in more briefed Manner
Maybe you are looking for
-
I have an apple TV, iPads, iPhone, and Macbook pro running Mavericks, I can mirror all my devices but the macbook pro won't display properly on the TV, any suggestions are appreciated.
-
Dump when switching to a different variant
Hi all, I am a freshman for FPM, and currently I have met a issue when using it. You know I want to switch to a different variant, but when I click the switch button, dump occurs: Dump Info---- Note The followin error text was processed in SD7 the sy
-
Simple SOA application, but error in load of wsdl wont compile
Hi all, I've come to the end of the line with this one, so I hope someone can help. I have a very simple business rules application - one function, one rule, one decision service - and the deployment descriptor (wsdl) copied at the bottom. When I try
-
Simple question about NumberFormat [really urgent]
Hi all, I have two little "problems": 1. I would like to use only three decimals in a double, for example: double d = 3.142345; Here I would like d to be 3.142 I know that I have to use NumberFormat and setMaximumFractionDigits(3) but I forgot exactl
-
WE19 (iDoc Test Tool) and case sensitive content
Hi experts, I am not able to send case sensitive content via WE19. When I change a value of an existing iDoc (via WE19) all values of the segment are converted to uppercase (independent of the domain). To reproduce: 1) Open transaction WE19 2) Use an