Determination of batch whose stocks are not available in system

Hi SAPgurus,
During batch determination , the system is determining a batch whose stocks are not available in system .(The stocks of that batch has been received and has been sold out 1 week back , In MMBE also the stocks of that batch is nil and another batch is available) .
One imp thing to note that after determination , system is giving error message while performing PGI.But the question is why it is determining at all.
Thanks in advance,
Jignesh

Kindly check the Storage Location against that Material & Plant as might be stock is available with that Batch in some different Storage Location.
Best Regards,
Ankur

Similar Messages

  • Icm trace level if smicm and SAP MMC are not available ( CE system on Unix)

    Hi Experts,
    Could you please let me know how will I increase the icm trace level if SMICM transaction code and SAP MMC are not available.
    I have an CE 7.2 system running on HP UNIX.
    Thanks and Regards
    Syam

    http://help.sap.com/saphelp_nw70/helpdata/en/0b/6aedff404d6b4a8cac8f1359e1b47c/frameset.htm
    kill -USR2 <pid>
    Markus

  • Material should be determined when then the stock is not available

    Dear All,
    One of our scenario is to do material determination. But the alternative material should be determined only when the actual material is not in stock.
    Kindly suggest the solution.
    Regards,
    Mullairaja

    As rightly said by friend Anirudh V B,
                     its possible through Material Determination. But not possible without ABAP coding.
    With the help of ABAP with min coding you can achieve this,
    like,
    let the ABAPer write coding to check the stock availability of the entered material before triggering "material determination" records.
    To do this availability check , then can jsut use the existing Function modules : BAPI_MATERIAL_AVAILABILITY (OR) AVAILABILITY_CHECK.  if the stock found zero / nil, let the "materail determination should trigger, else process as normal .
                its already available, doenst need / take much time , but ABAP involvement is needed to fulfill your requirement.
    Regards,
    Reazuddin MD

  • Schedule line getting created for material whose stocks are maintained

    Hi Friends,
    I am having an unusual problem of schedule line getting created for material whose stocks are there in the system. I have created an SO for some material, and all the material is having sufficient qty in the system but still the system is generating schedule line.
    Can someone please advice what could be the problem and the solution to it.
    Regards,
    Wasim.

    Hello Wasim,
    - In TCode MM02, Check Scheduling in MRP2 Tab of Material master (if MRP is active.)
    - In Tcode OVZ9 - AvC control, for your Availability check maintain (eg. 02) in material & Checking Rule:A-SD order.
    Whether Check availability without replenishment lead time is unchecked, as this Indicates whether, during the availability check, the system checks the replenishment lead time. So, Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
    Thanks & Regards
    JP

  • Re: 13 in. MBP 2012 OS X Mavericks Maps (DIRECTIONS are not available)

    Iam in Dubai UAE, i have 13 in MBP 2012 with OS X Mavericks.
    I cannot get directions in using the app MAPS?
    What do i need to do on my mac?
    Is anybody experiencing the same error i get on getting directions using the MAPS in Mavericks?

    my same problem (re-post quote)
    need your response guys..iam using MBP 13 in 2012 2.5 Ghz 8Gb  RAM INTEL HD4000 500Gb Hard Drive.
    iam currently in DUBAI, UAE
    Hi i would like to get an answer from these community,as iam having an error message like these below:
    Although i have clearly specified a start and end location.
    Directions are not available.
    A route to the nearest road cannot be determined.
    # I would like to have an answer from the above issue i have.

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

    I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

    Is there a setting that needs to be set to allow the annotation features?  I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

  • TF400893: Team Foundation Server services are not available.

    Hi Gang
    Am getting
    TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
    consistently when trying to access TFS2012 Web Access.  I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
    Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
    Regards

    Hi,
    Thanks for your feedback!
    I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
    TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
    Hope it helps!
    Best Regards,
    Cathy Kong
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Why some times delivery  will created through vl10c even sale order stock is not available?

    Hi,
    why some times delivery  will created through vl10c in batchmode even sale order stock is not available?
    Thanks,
    Kalyan.

    the correct english name is : Replenishment leadtime
    Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

  • How do I revert to abackup from time machine? The backups prior to Lyon install are not available  - restore button is not active. I wish to return to Snow Leopard.

    How Do I revert to Snow Leopard from Lyon?
    The backups prior to Lyon install are not available... the restore button is not active.
    thanks!

    You need to do a full system restore from your last Snow Leopard backup.
    See #14 in  Time Machine - Frequently Asked Questions.

  • Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

    Guys,
    First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
    Services in error state under the event viewer:
    Event Type:    Error
    Event Source:    CSAgent
    Event Category:    Kernel Rule 
    Event ID:    256
    Date:        7/29/2014
    Time:        11:42:41 AM
    User:        N/A
    Computer:    UNITY
    Description:
    A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
    Event Type:    Error
    Event Source:    CiscoUnity_MALEx
    Event Category:    Error 
    Event ID:    30012
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
    This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
    Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation.  The SysCheck utility may assist in diagnosing the problem.
    Event Type:    Error
    Event Source:    CiscoUnity_Doh
    Event Category:    Error 
    Event ID:    32013
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    Doh logon failed due to messaging component logon error: 8004052eH
    I found and followed to the letter:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
    I also went ahead and ran GUSI with some mixed results under environment information:
    SQL Version = Microsoft SQL Server  2000 - 8.00.2282: unknown SP
         SQL Edition = Desktop Engine
         Windows version =  5.2 Build 3790: Service Pack 2
         Outlook is not installed on the local server
         MAPI Provider : CDO Version - 6.5.8211.0
         MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
                AvCsMgr : is set to recommended value
                AvMsgStoreMonitorSvr : RegKey not found.  Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvNotifierMgr : RegKey not found.  Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvUMRSyncSvr : is set to recommended value
                CsBMsgConnector : RegKey not found.  Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsBridgeConnector : RegKey not found.  Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsVpimConnector : RegKey not found.  Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
             TCPChimney : Disabled
             RSS : Disabled
             *Pulled from UnityDB Configuration Table*
             ExcludeAllReceipts : 0
             ExcludeReturnReceipts : 0
             DisableSearchFolderUse : 0
             MinSearchFolderLifeHours : 1
             OptimizeSearchFolderUse : 0
    I tried following and deleting the Unity System Profile:
    https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
    But I am still scratching my head. Any direction will be appreciated.

    Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question.  Anyways, this post could serve for future reference. 

  • HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem contin

    My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem continues.

    Have you talked to your carrier (or your friend to his)?  Could be an issue at their end.

  • I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?

    I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
    Sorry for the long 'subject'!  hahaha  I am new to the community.  This should be fun!

    No, What I mean  is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA. 
    I already change my address and select USA but still I can not download app for USA

  • My pc crashed and I lost all my pictures and music that was stored on the pc.  Now i have a new pc and when i connect to itunes using my password all my music and photos are not available.  they appear to be lost.

    my pc crashed and i lost all my pictures and music that was stored on the pc. now i have a new pc and when i log into itunes all my music and photos are not available.  I guess i dont understand the pupose of itunes and its worth.  I thought it backed up all my photos and music, but apparently not.  So what do I use so that when i lose data on  my pc i can retrieve it again at a later date or after a crash?/

    Your content will only be where you put it.  It has always been very basic to always maintain a backup copy of your computer.
    You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
    You can import your pics taken with the iphone as you would with any digital camera.
    You can e-mail the other pics to yourself, they will never be of the original quality.
    You can out a unique contact and calendar entry on the computer.  You should get the option to merge the data when you sync.

  • I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

    I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    iOS- How to transfer or sync content to your computer
    iTunes Store- Transferring purchases from your iOS device or iPod to a computer
    If you have non-purchased content then you need to use third-party software to transfer it to your iTunes Library - Phone to Mac - Pod to Mac.

Maybe you are looking for

  • How to create a conditional report variable, which displays the conditional

    Hi Experts, Could you please guide me how to build a conditional report variable For ex: I have the data for ATM and POS in the table. I will only get the data of ATMS because of the filters, I still want to display the POS in the report and the valu

  • Issues with Withholding tax on advance paid

    Dear Experts Our client deducts TDS on the Advance amount paid and on posting of Invoices from the Vendors. The documents are posted with withholding Tax types configured for this purpose in F-48 and FB60 respectively. Document splitting has been act

  • Poor quality glossy LCD screen

    I'm really disappointed by the quality of the glossy LCD screen on my MacBook Pro. I have at least 15 grey 'dots' (the Genius at the Genius Bar said they're not really pixels since they're not completely square in shape), one clearly dead pixel, and

  • Shud i make use of enhancement fwk here ?

    hi, i have extended an idoc and i need to populate the extra segments before sending it out to EDI (outbound). typically we write this code in an user exit. any idea if i can make use of enhancement fwk in this situation ? if so how ? thks

  • Multiple Pushbutton excluding from tool bar

    I  have this code MODULE status_0100 OUTPUT.   APPEND 'CHANGE'  TO fcode.   APPEND 'SAVE' TO fcode.   SET PF-STATUS 'STATUS_0100' EXCLUDING fcode. ENDMODULE. Could i excluding more than one pushbutton in the same statement? BR, Ali Moderator message: