Determine linked SRM system in ECC

Hi All,
I need to be able to determine the linked SRM system from ECC in order to call a function module in SRM to return the URL for SRM to ECC to allow a workitem in ECC to contain a link to SRM.
Table BBPC_RFC_DEST seems to hold a link but I've never seen this table used, does anyone know what this table is used for? The config help says:
Definition of RFC Connections for Resource-Related Billing
Use
In this IMG activity, you define which connected SRM Systems are relevant for resource-related billing.
Enter the logical system and the RFC destination.
Requirements
The connected SRM System must be Release 5.0 or higher.
but would populating this table alone activate something else?
Alternatively does anyone else have any other suggestions for retreiving the URL for SRM from ECC other than creating a custom table to hold the information.
Regards
Chris

Hi all,
perhaps I need to clairfy my question.
I know how to find the URL in SRM, my requirement is to be able to work out the URL of the linked SRM system from within ECC.
I have a couple of ideas such as call a function mdoule in SRM to read the user arrtibutes which will give me the URL for system. To do this I need to first determine the RFC destination for the linked SRM system, I think I can do this by populated table BBPC_RFC_DEST in ECC. However I sdon't know if popualtign this table in ECC will have any other implications?
Does anyone know what the implications of populating table BBPC_RFC_DEST in ECC arE?
or does anyone have an alternative soltuion for determining the URL for the linked SRM system from within ECC?
Regards
Chris

Similar Messages

  • Purchase Orders replication in SRM system from ECC system

    Hi All Experts,
    Would like to know whether PO's created in R/3 ECC system can be replicated in SRM system ? If so please share the procedure and documentation.
    Experts guidance will be appreciable on this.
    Regards,
    Sharvari Joshi.

    Dear Rajesh K,
    Thank you for quick response.
    The requirement is as below.
    We have BI + SRM implementation as in Extended Classic scenario BI team fetching PO's from SRM system but now the scenario is PO's getting created in ECC environment. Now we have to replicate same in SRM hence BI team will be using same extractor for pulling PO realated data.
    As going further we have requirement EC scenario of SRM PO's will be creating in ECC and rest all document processess will be taken care in SRM.
    If you need any explanation please revert.
    Regards,
    Sharvari Joshi.

  • The quick way to tell it is a SRM system or not

    Experts:
    I want to know if there is any quick way to determine a SRM system,  such as some SRM unique txn?
    On txn saint, Business Planning and Consolidate is a SRM only package?
    If you could provide the SRM t-codes that can launch web-browser, you might help me to identify it is a SRM7.0 or not.
    Thanks!

    Hi Kelly
    bbp_pd transaction helps to determine whether this system is SRM transaction or not
    go to bbp_pd
    select SRM Business Object like bus2121 etc...then you can make ensure that SRM business objects are created so it is srm system
    some customers uses for Only GOA , some use only for creating BID Invitation and BID only.
    PPOMV_BBP - makes ensure that it is SRM system all vendors are stored int his transaction
    BUT000 - table - entries present means all business partners are stored in this table.
    please clarify what exactly you are looking for..
    muthu

  • PO No range when we ink two SRM system with One ECC system

    Hello Experts,
    We have a client requirement to link Two SRM Systems with One ECC system.
    In this case what number range we need to maintain in both SRM systems for PO.
    -The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
    -We have Extended classic scenario.
    -Also PO Doc type is going to be same.
    Can we handle this by increasing the buffer of the number range in one of the SRM system?
    Any idea...pls help urgently.
    Best Regards,
    Anil
    Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

    Hello Anil,
    Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
    1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
    2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
    3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
    In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
    Regards.
    Laurent.

  • Material replication ECC-SRM, in wrong queue (outbound in SRM system)

    Hi,
    I'm working in SRM 5 integrating with multiple ECC systems.
    When attempt to replicate materials from one of the ECC systems, if I run the transaction R3AS for MATERIAL, the Monitor Load Transaction shows the object is "Running" indefintely.
    I checked the inbound queue in SRM and there was nothing there, then I checked the outbond queue also in SRM and the entry is there.
    Which means its in the wrong queue it should be in the inbound queue.
    By the way there was nothing related to the object in the queues on the ECC side.
    Can anyone point me in the right direction to fix this.
    Thanks and Regards'
    David

    As above people suggest: re-check customising, everything done correctly?
    Now to the addition: what you see is correct behaviour, the initial download is started from SRM, so it sends the request from SRM outbound to ECC inbound and then the data from ECC outbound to SRM inbound.
    Basically, check all queues in all directions to see if there is a sysfail somewhere.
    Regards,
    Robin

  • SAP ABAP Client proxy Errror occured when determining the Business system.

    Dear Friends
       I am trying to push data from ECC to PI and then MS-SQL Server. My SAP scenario is ABAP Proxy to JDBC
      I have created on Enhancement Implementation for AS01 ( Asset Master creation). Here I am calling my ABAP proxy and uploading ANLA and ANLZ strucutre  to my abap proxy.  but I get the run time error. that suggest Error occurred while determining the Business system - SLD_API_Exception.
    My all IR and ID objects are activated, I have tested the scenario successfully without error in ID, 
    When I check SM21 it suggest that error is due to XI is unable to access the SLD. Could_not_determine_sld_access_data.
    SLDCHECK works fine in PI system.
    SLDCHECK is failed in my ECCDEV 400 client System.
    Is it mandatory to configure SLD access in ecc development system as well ?  is this  the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly.
    Please look the below link it contains the enhancement code of AS01 transaction code where I am calling abap proxy to send the data.  Runtime analysis report, SM21 log, and SLDCHECK failed screen shot in 400 client. SLD working fine in PI system. my SLD is configured in SOLMAN system.
    You can see the error and Code from this link ->  [Code , Runtime Dump Analysis report, SM21 Log and SLDCHECK|http://www.scribd.com/doc/61192432/Sap-Abap-Proxy-Error]
    Please help me How can I solve this ?
    Regards
    Naeem

    Hi Naeem,
    >>>is it mandatory to configure SLD access in ecc development system as well ? is this the reason why I am not able to push the data to my PI system? Please tell me How can I solve this error? you any answer will be appreciated greatly
    YES...you need to configure SLD check in your ECC System also
    Also check the links below for proxy connectivity step by step
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?quicklink=index&overridelayout=true
    Regards,
    Naveen

  • Tracking Transports for confi/dev overwritings in sap srm system

    Hi, could anyone please suggest the best way to track and identify any code/config overwritings due to any new change being transported into the client under a new transport?
    in m previous organization we had a custom developed tool for identifying such potential overwritings in ecc system however for SRM system it did not work.
    could anyone please suggest an automatic/manual check by which i could be able to identify if any new change will potentially overwrite any existing setting in the SRM system
    Thank you

    Hi Parikshit,
    Please make use of Solution Manager 7.1 BPCA tool.Using this tool you may be able to identify which part of the business solution may get impacted with a new change.
    This tool can work in any SAP solution including ECC, SRM , BI, CRM etc. but it requires certain pre-requisite configuration to be done in Solution Manager.
    Refer SAP help for more details on BPCA
    http://help.sap.com/saphelp_smehp1/helpdata/en/e7/ae57e0291149adaca93a9dcce33abb/content.htm
    Wiki Link :Business Process Change Analyzer(BPCA) - Solution Manager - SCN Wiki
    Hope this helps.
    Regards,
    Deepak Kori

  • Dynamic Determination of Logical System- Transaction Launcher

    Hi Friends,
    Need your suggestions and inputs on how to dynamically determine the logical system for the transaction launcher.
    Our system landscape is like this.
    We have one CRM connected to mulitple back end ECC Boxes. Currently, we have created separate TL's fo VA01 ( One each for each back end application ) and provided the same in logical link and controlled the same via business role.
    For eg: BROLE1 - LLINK1  having (TL VA01) pointing to ECC System1
    BROLE2 - LLINK2  having (TL VA01) pointing to ECC System2
    BROLE3 - LLINK3  having (TL VA01) pointing to ECC System3
    The above procedure is working fine. But what we are trying to do is, when the end user clicks on the TL link in WEB UI, Based on the assigned business role, it should dynamically determine the back end system and open the VA01 Screen in that system.
    I have activated indicator multiple systems in the customizing of mapped logical systems.
    In debugging mode, i have tried changing the LOGSYS value @ run time in the handler class.
    Any pointers on this would be of great help.
    Thanks,
    Madhu

    Hi,
    Try this..
    To maintain RFC destination in each business role, there is one functional profile  "ERP_SALES_ORDER" where in you can maintain respective rfc destination.
    Create z-functional profile's for "ERP_SALES_ORDER" and maintain corresponding rfc destination, later assign these erp sales order function profiles in respective business roles trxn (CRMC_UI_PROFILE).
    you can use the below statement to fetch rfc destination whcih assigned to business role via functional profile.
      If gv_rfc is INITIAL.
        gv_rfc = CL_CRM_IC_ERP_SERVICE=>GS_ERPPROF-RFCDEST.
      ENDIF.
    Hope this helps.
    Cheers,
    Sumit Mittal

  • SWO1 - No destination could be determined for logical system

    Hi there,
    I am trying to call a remote transaction via SWO1, but I am getting the following error:
    No destination could be determined for logical system TSTCLNT120
    Message no. OL860
    Diagnosis
    You attempted to instantiate an object with the specified logical system within the distributed runtime environment. However, an RFC destination has not been defined for this logical system.
    System Response
    The object instance cannot be generated.
    Procedure
    Define the RFC destination or use the local runtime environment.
    I go to SW01 --> Type an object name "TSTC" --> Click TEST --> New Dialog window Clicked on the Full key --> Entered the Logical Name for remote system (ECC), and also Entered Key: SU01 --> When I click on the continue, I am getting the above mentioned error.
    I can clearly see that it is looking for mapping Destination for that Logical name. Can someone please tell me what t-code or table I need to go and map the Logical Name with a RFC destination?
    Thanks in Advance
    Kumar

    hi
    try these links
    Re: R/3 Connections in RFC destination node.
    Assign a logical system in RFC
    Regards
    Sajid

  • Multiple SRM and single ECC in landscape

    Hi all,
    I have a requirement where we need to implement SRM 7 in one region (so that we are able use the new features) and continue with SRM 4 for the other regions. Both the SRM systems will connect to the single ECC 5 system in the landscape.
    Has anyone implemented a similar scenario where multiple SRM systems are connected to one ECC system
    What are the problems that one will encounter.
    Self service procurement, Supplier self services and strategic sourcing are the scenarios that are currently configured.
    Contract management may be used in the future
    Any suggestion / idea will be greatful
    Thanks
    Venkat

    Hi Venkat,
    yes, it's possible to link the same ECC backend system to different SRM systems (with different releases). We have also a scenario like this.
    The only problem what comes up to my mind is, that you need to take care about the number ranges (as the PO, RS... number ranges are from the point of view external numbers).
    Regards,
    Peter

  • PI systems in ECC

    Hi Experts
    I have a requirement where I need to configure the two PI systems from two different Landscapes. Is there a way to configure the two different PI systems from different landscape. When I connect the two PI Systems, and should be able to see the conent or service interfaces in SPROXY
    Please send if there is a blog available or suggest how to configure the two PI systems in ECC
    Thanks for your inputs
    Thanks
    PR
    Edited by: PR on Jan 27, 2012 11:12 AM

    Hi,
    To configurate an ECC with two PI, that's not an issue when you exchange Idoc, because in ALE configuration you determine which Partner (logical system) you want to use to send/receive an idoc. So easy to do.
    but with proxy, if I'm not wrong, as in SXMB_ADM of ECC, under "Integration Engione Configuration", you can precise only one parameter "RUNTIME > IS_URL = dest://INTEGRATIONSERVER (for instance)" with INTEGRATIONSERVER which coresponds to the RFC destination (e.g INTEGRATIONSERVER) to be used to reach the Integration Server you want to use (e.g PI)... and as you can see, there is only one entry!
    So I don't think it's possible to have one ECC linked to Two PI for abap proxy exchanges.
    Regards.
    Mickael

  • What is the best approach to capture TBOM's for a SAP SRM system/functionality?

    Hello SCN Community,
    It would be much appreciated if somebody could share some information about the following....
    What is the best approach to create TBOM's for a SAP SRM system? The SRM functionality is basically consisting out of multiple ABAP Web Dynpro's that are connected as a process via a SAP Portal (as is understand it). The entrypint to the SRM functionality is via the SAP Portal.
    Do I first have to create a link to the Portal via an SAP Web Application link in SOLAR01 and then start recording? Will it record only the portal objects or also the ABAP Web Dynpro objects?
    Do I have to list all the separate ABAP Web Dynpro's in SOLAR01 and use those as a starting point?
    I am myself more familair with more classical SAP ABAP ECC systems and transactions.  I could hardly find any information on the use of BPCA and the required TBOM's in the area of SRM.... Any help would be much appreciated!
    Kind Regards,
    Guido Jacobs

    Hi Guido,
    today was a new blog released, maybe this helps:
    BPCA - Powerful Risk Eliminator
    Best Regards,
    Christoph

  • How Many systems like ECC and BI can connect to EP server

    Dear experts
    I want to know ,how many systems can connect to one EP server,like ECC dev,qty and prd ,and BI dev,qty and prd with JCO and SSO connection...can you please clarify
    Thanks in advance
    Regards
    krishna

    Hi Krishna,
    The best practice is to have separate systems for Development, Quality Assurance and Production.
    Suppose you have One EP system, One ECC system, One BW System and One SRM system.
    Then your landscape should be designed as stated below.
    Development Environment:
    Here you work on new developments/bug fixes and enhancements.
    One EP System, One ECC system, One BW System and One SRM system.
    And all these systems must be connected to EP system.
    All of the above systems must reside in same domain.
    QA Environment:
    Here testing is done by testers/business.
    Once you complete development and unit testing you have to transport those objects to QA system.
    In this environment you have maintain all the systems similar to Dev Environment.
    Production Environment:
    This environment is for end users.
    It should contain all the above said systems.
    Here strictly no development/testing is not allowed.
    Objects are transported from DEV> QA>PROD.
    Regards,
    Nagireddy.

  • Unable to create a PO in SRM system

    During cretion of PO in SRM system we are encountering the following situation:
    Prior to that we have configured all the initial settings as below:
    "Defining System landscape" on SRM side,(which updates the table BBP_BACKEND_DEST) we have defined it as type ERP_4.0 as we currently have an EhP4 backend .
    We are getting the error msg: No customizing entry for "SRICLNT801' in table BBP_BACKEND_DEST when I try to create a PO in SRM Portal.
    The following entries in BBP_BACKEND_DEST Table (this table is updated when Defining the System Landscape config) looks as below.
    For Backend ECC Clnt - 801, Log System - ERICLNT801, RFC Destn - ERICLNT801 , RFC Dialog - ERICLNT801_DIALOG,  Sys type -ERP_4.0
    For SRM local clnt - 801, Log System - SRICLNT801,  RFC Destn - SRICLNT801 ,  RFC Dialog - SRICLNT801, Sys type -LOCAL
    Any clue on this ?? Its been a while now and i have no idea why is this occuring??

    Hi there,
    I had a further look at our database. Please see the following information.
    in case of ECC EHP 4.0 the use of PI is mandatory. However, on your        
    on risk and keeping in mind that this is kind of a modification, you       
    could change the backend sys-type in table BBP_BACKEND_DEST back to        
    ERP_3.0; a further option would be to create an implementation in          
    the BADI BBP_DRIVER_DETERMINE, to call a customer own driver during the    
    transfer of documents to the backend.                                      
    1) In case you run a EHP 4 in backend, you need to set system
       type ERP_4.0 in table bbp_backend_dest, which requires the use
       of PI.                                                                               
    2) As prerequisite for activitaing LOG_MM_P2PSE_1, you need to have         
       EhP 4 installed in your ECC system, also the following business          
       functions need to be activated:                                          
       ESOA_OPS01, LOG_ESOA_OPS_2 and LOG_MM_CI_2                               
       (please also check the information and documentation about the BF        
       in your backend ECC system)   
    Hope this helps,
    Kind Regards,
    Matthew

  • Error deploying .sca files of SRM MDM Catalog 2.0 in SRM system

    Hi All,
    I'm trying to deploy the SRMMDM20SP02_2_BP_SRM_MDM.sca in SRM system but i'm getting the following error while deploying it.
    08/03/04 16:05:22 -  Start deploying ...
    08/03/04 16:05:22 -  EAR file uploaded to server for 16ms.
    08/03/04 16:05:22 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/srm_mdmcat_bp_webappr.ear.
                         Reason: None of the available containers recognized the components of application sap.com/srmmdmcatbp~webappr; it is not possible to make deploy.
                              at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:570)
                              at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312)
                              at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
                              at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                              at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                              at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                              at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                              at java.security.AccessController.doPrivileged(Native Method)
                              at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                              at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                         For detailed information see the log file of the Deploy Service.
    08/03/04 16:05:22 -  ***********************************************************
    Mar 4, 2008 4:05:22 PM   Info: End of log messages of the target system.
    Mar 4, 2008 4:05:22 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    I tried deploying using SDM and JSPM. Either way i'm getting the same error. Can anyone tell me what is going wrong and what is the container it is requesting???
    Thanks in advance.
    Regards,
    Seema

    Hi Tejas,
    Thank You for ur response.
    I am deploying on SRM server with WAS 7.0 so I guess that is not the reason. If you can notice in the error it is trying to find some container which it is not able to find. Do you have any hint what this container is??
    Also i would like to know what is the content of the SRMMDM20SP02_2_BP_SRM_MDM.sca. Does it gives us a UI like the Configuration UI?? If so can u please send me the link via which i can access it coz i didn't find any such link in the documents.
    Thanks and Regards,
    Seema.

Maybe you are looking for