Determining the reason for a call to Clip.stop( ).

How does one determine if a Clip has stopped because the audio is finished vs. an arbitrary call to stop()?

Hello Jeremy76504,
Welcome to the Apple Support Communities!
I understand that you are having an issue with the camera on your iPhone not focusing as you would expect. In this situation, I would recommend reading over and working through the troubleshooting steps in the attached article.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Your photos are blurred or out of focus
If your photos are blurred, out of focus, or have dark spots, try these steps:
Make sure that the camera lens is clean. If you need to clean the lens, use a microfiber cloth. If you see dirt or debris inside the lens, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
With iPhone 6 Plus, a metallic case or magnetic lens could interfere with optical image stabilization. If you have a metallic case or magnetic lens attachment, try taking a picture without it. Then compare the quality.
Adjust the focus by tapping on the person or object in the preview screen. You’ll see the screen pulse or briefly go in and out of focus as the camera adjusts. In photo mode, try to stay steady when adjusting the focus. If you move too far in any direction, the camera will automatically refocus to the center. In video mode, you can adjust the focus before you begin recording.
If the color seems too bright, or you see double-exposures of moving objects, make sure that HDR is set to Auto or Off. Tap HDR at the top of the screen to choose a different setting.
Have a great day,
Joe

Similar Messages

Finding the reason for dequeued calls?

We're using UCCX8. In Supervisor Desktop, we show a few calls as Dequeued. The help pages define dequeued as...
Number of calls that were dequeued. A call is considered to be dequeued from a particular CSQ if the call is handled by an agent in another CSQ. This situation can occur when a call is queued for more than one CSQ.
However I don't believe that is the case for us. We don't queue a call for more than one CSQ. Searching the forus here I found that it could also be marked as dequeued if you use the dequeue step (we don't), or if the call was transfered (our script doesn't do that).
So I'm stumped. I produced a CSQ ActivityReport in Historical Reporting which showed the calls to be "Calls handled by other" -- which the HR User Guide says is:
Total of the following calls:
•Calls queued for the CSQ, then dequeued by the Dequeue step in a workflow, then marked as handled by the Set Contact Info step in the workflow.
•Calls queued for more than 1 CSQ and then handled by another CSQ.
So this is still a bit of a mystery, since I didn't think our script should be doing either of those. Sounding like a script error. How can I troubleshoot these calls? Most of the HR reports seem to focus on only handled or abandonded calls. How can I track down these dequeued calls to see what happened?
Thanks

Bump ahahhaha
does anybody knows?

My rear camera will not focus on my iPhone 6plus, I updated to 8.2 today to see if it fixed it but it didn't, what is the reason for my camera to just stop working?

My camera doesn't focus anymore, I didn't drop it or get it wet either. The front camera still works like it should. I even updated my phone to 8.2 today and still it didn't fix the problem.

Hello Jeremy76504,
Welcome to the Apple Support Communities!
I understand that you are having an issue with the camera on your iPhone not focusing as you would expect. In this situation, I would recommend reading over and working through the troubleshooting steps in the attached article.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Your photos are blurred or out of focus
If your photos are blurred, out of focus, or have dark spots, try these steps:
Make sure that the camera lens is clean. If you need to clean the lens, use a microfiber cloth. If you see dirt or debris inside the lens, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
With iPhone 6 Plus, a metallic case or magnetic lens could interfere with optical image stabilization. If you have a metallic case or magnetic lens attachment, try taking a picture without it. Then compare the quality.
Adjust the focus by tapping on the person or object in the preview screen. You’ll see the screen pulse or briefly go in and out of focus as the camera adjusts. In photo mode, try to stay steady when adjusting the focus. If you move too far in any direction, the camera will automatically refocus to the center. In video mode, you can adjust the focus before you begin recording.
If the color seems too bright, or you see double-exposures of moving objects, make sure that HDR is set to Auto or Off. Tap HDR at the top of the screen to choose a different setting.
Have a great day,
Joe

How to find out the reason for blocking locks?

PB Application try to create data in ASE 12.5. With this operation, there are sql, sp, trigger involved. Most of the it is okay. With lock of sleeping or sync sleeping lock. User wait for a short time to get the result.
but some time, there are blocking lock.
If spid for the app is 1. then looks like this app also generate another spid, say it is 2. and 2 is blocking by 1. spid 1 holding lock!
then all user is frozen because of spid 1 holding lock!!! How to figure it out the reason for blocking locks?

Thanks, Mark. Yes, sp_lock, sp_who, ... are common tool I used.
I found out one case like:
I have a SP which call a View for data.
When I run this SP, suppose the sipd is 1. then it will create another spid 2 because of access view and it gone very quick. This cause spid 1 block spid 2 within a short time.
If the are many user run the app, the app will be frozen and everyone is waiting. Finally it release, no dead lock, but the performance is not acceptable.
That why I have this question.

Is index range scan the reason for query running long time

I would like to know whether index range scan is the reason for the query running long time. Below is the explain plan. If so, how to optimise it? Please help
Operation     Object     COST     CARDINALITY     BYTES
SELECT STATEMENT ()          413     1000     265000
COUNT (STOPKEY)
FILTER ()
TABLE ACCESS (BY INDEX ROWID)     ORDERS     413     58720     15560800
INDEX (RANGE SCAN)     IDX_SERV_PROV_ID     13     411709
TABLE ACCESS (BY INDEX ROWID)     ADDRESSES     2     1     14
INDEX (UNIQUE SCAN)     SYS_C004605     1     1
TABLE ACCESS (BY INDEX ROWID)     ADDRESSES     2     1     14
INDEX (UNIQUE SCAN)     SYS_C004605     1     1
TABLE ACCESS (BY INDEX ROWID)     ADDRESSES     2     1     14
INDEX (UNIQUE SCAN)     SYS_C004605     1     1

The index range scan means that the optimiser has determined that it is better to read the index rather than perform a full table scan. So in answer to your question - quite possibly but the alternative might take even longer!
The best thing to do is to review your query and check that you need every table included in the query and that you are accessing the tables via the best route. For example if you can access a table via primary key index that would be better than using a non-unique index. But the best way of reducing the time the query takes to run is to give it less tables (and indexes) to read.
John Seaman
http://www.asktheoracle.net

Function module to determine the date for the nth weekday of the mth month

Hey folks,
Is there a function module which determines the date for the mth weekday of the nth month in the pth year.
For instance, if I input 2nd thursday of the 4th month in 2008, it should return me, 04/10/2008 (MM/DD/YYYY).
Thanks and Best Regards,
Puja.

Hi Ravi,
Hadn't been able to work on this lately...You solution was quite close, but did not work for a few scenarios....I tweaked the logic a bit to take care of them as well...
So here goes the code:
================================================
DATA first_day_of_month TYPE datum.
DATA day TYPE p.
CONCATENATE year month '01' INTO first_day_of_month.
CALL FUNCTION 'DAY_IN_WEEK'
    EXPORTING
      datum = first_day_of_month
    IMPORTING
      wotnr = day.
DATA day_number TYPE numc2.
IF day = weekday.
    IF recur = 1.
      DATA ls_date(10) TYPE c.
      CONCATENATE month '/01/' year INTO ls_date.
      CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
        EXPORTING
          date_external                  = ls_date
       IMPORTING
         date_internal                  = date.
    ELSE.
      day_number = ( ( recur - 1 ) * 7 ) + 1.
    ENDIF.
ELSEIF day < weekday.
    day_number = ( ( recur - 1 ) * 7 ) + ( weekday - day ) + 1.
ELSE.
    day_number = ( ( recur - 1 ) * 7 ) + ( 7 - day ) + weekday + 1.
ENDIF.
IF date IS INITIAL.
    CONCATENATE year month day_number INTO date.
ENDIF.
====================================
There still could be some loopholes in this....am not sure....but it sure did seem to work for a couple of random checks that I performed.
Brownie points to you for giving me a direction.
Thanks,
Puja.

E613 SYST: You cannot determine the period for rule 03

Dear All,
We are configuring asset module and using MSTL dep key for Tax books. When we tried to create an asset with MSTL dep key, we encountered error - 'E613 SYST: You cannot determine the period for rule 03'. when verified config OAVH Define Calender Assignments transaction, Period control '03' is missing for fiscal year variant K4. Period control is exisiting in Maintain Period Control and but not in Define Calender Assignment. What I understand these period controls are being delivered by SAP. Not sure why period control '03' is missing. all other period control keys are available.
question is how to add period control 03 so that we can use MSTL dep key. we are currently using 4.7c. Any suggestions would be appreciated.
thanks
Sunil

message went abruptly before I finish.
+++++++++
continuing from previous email
Period control 01 has following entry in the transaction
Fiscal Year Variant Per control Name of the period control Year Month Day Period Mid Month
K4 01 Pro rata at period start date blank 0 0 blank not selected
If I follow SAP help to define period control '03', then I just need to copy period control '01' which is listed above and select 'Mid Month' check box.
Wondering anyone did this in the past. MSTL depreciation key is being used in MACRS tax for US. I am sure people who have implemented assets module for US with tax dep, they might have encountered this issue.
thanks
Sunil

How can I disable the Reason for Rejection field in VA02 line items

Hi,
I dont want the users to be able to change the reason for rejection field in the sales order line items. Can someone please suggest a tried and tested way of doing this
Thanks for reading.

Set up an auth object for the field. In userexit field modification check the auth object and set the field to be grayed out if they don't have authority. Users can then not change the value of the field Sample code
IF screen-name = 'VBAP-ABGRU'.
       AUTHORITY-CHECK OBJECT 'Z_BLK_REAS'
               ID 'ABGRU' DUMMY.
      IF sy-subrc EQ 0.
        screen-input = 1.
      ELSE.
        screen-input = 0.
      ENDIF.
ENDIF.

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

My new iPod touch is getting really warm while I use it. Is it normal? I mean, I have silicone cover, maybe it's the reason for iPod being so HOT?... How do you think, is it too important to have a cover on the iPod? How about screen protector? :S

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

What are the reasons for disabling the saving of data in a PDF?

I seem to have had more than my share of encounters lately with PDF files that have editable fields but have their data saving capability disabled.
In some of these situations this has been an absolutely maddening inconvenience.
When I attempt to bring this to the attention of whomever's responsible I get brushed off.
One person's response was: Actually the majority of the PDF forms I have are Adobe reader and you cannot make changes electronically at all. The reason for this is to make sure that the documents are not altered in any way. The <companies creating the PDFs> must make sure that changes are not being made to their forms.
I just don't understand that. How is entering and saving data 'altering' a PDF?
Is this just bone-headed bureacracy, an urban legend, or is there some fundamental practical matter I am not aware of?

Saving a filled-in form has always been disallowed with Adobe Reader, formerly known as Acrobat Reader. Though there are a few exceptions...
History lesson:
Forms features were first introduced in Acrobat 3. As you might imagine, a number of folks wanted to be able to save filled-in forms using Acrobat Reader. Since this functionality simply was not a feature of Reader, it was not possible. If you wanted to save a filled-in form, you needed to use Acrobat (Exchange).
Upon recognizing the potential market for a product that they could sell, Adobe developed and released Acrobat Business Tools, which was a version 4 product. It was positioned between Reader and Acrobat, was reasonably priced, and allowed users to save filled-in forms, apply digital signatures, and add comments. Unfortunately, this was marketed poorly and did not achieve commercial success.
The next iteration was a similar product named Acrobat Approval, which was a version 5 product. It too could save a filled-in form, but was in some ways more limited than Business Tools, and suffered a similar fate. That is, it was not a market success. It was however distributed for free to US taxpayers on the IRS tax products CD-ROM.
The next idea from Adobe - which was a good one - was to provide for a means of embedding usage rights in a PDF document. These rights would allow Reader to do things it normally would not be able to do, such as saving a filled-in form, adding comments, importing/exporting form data, creating new pages using templates, connecting to databases and web services, etc. At first, the only way to enable these usage rights was with an expensive product from Adobe, so the potential was initially not realized.
With the release of Acrobat 7, Acrobat users were able to add some usage rights, such as commenting. While this was a welcome addition, folks still wanted to be enable forms to be saved with Reader. Finally with the release of Acrobat 8 Pro, users were able to enable forms to be saved with Reader, but it came with licensing restrictions. In short, if the licensee distributed the form for more than 500 recipients, the licensee could use data from no more that 500 copies of a particular form that was returned to them, including hardcopies. This was great for forms used inside of an orginization, but not so great for forms that needed to be used by the general public. Still, it was a very useful feature for a majority of businesses for internal forms, the vast majority of which have fewer than 500 employees.
Acrobat 9 or 10 didn't change things. Adobe still wants to capitalize on this market, which certainly is not a bad thing for Adobe and their stockholders. The US IRS forms have long been saveable with Reader because they licence Adobe Reader Extensions, which provides revenue for Adobe.
Note that some third-party PDF viewers allow users to save filled-in forms whether or not the documents have usage rights. Such software has a different marketing model than does Adobe Reader/Acrobat, and rides the coattails of Adobe by taking advantage of the popularity of PDF forms.

What may be the reasons for my iphone switching off all of a sudden and how do i prevent it?

what may be the reasons for my iphone switching off all of a sudden and how do i prevent it?

With the home page on display, in the menus select View, then Zoom and then Reset
For details on the zoom features see [[page zoom]] and [[text zoom]]

TS2972 I assume my Apple TV should allow me to view all events,albums and slideshows but It only allows four events to display on my TV. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer? Ch

I assume my Apple TV should allow me to view all events, albums and slideshows in my iPhotos app but it only allows four events and four albums to display on my television. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer?
Chris

No, I have not chosen photos to share as I assumed that the Apple TV would access all photos and music that are stored on my iMac.
Thanks for your advice. I will check it out.
Chris

Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

How to determine the values for Model Parameters in Forecasting

Hello Gurus,
On basis we will determine the values for the Model Parameter values (Alpha, Beta, Gamma, Sigma).
Thanks,
Siva.

Dear Siva,
the values are dependent from the forecast stratey and forecast model.
The forecast strategy determines the method or the techniques that are used to create the forecast. You set the forecast strategy in the forecast profile.
There are some settings that you must make for certain forecast strategies. The table below shows you which settings these are. You make these settings either in the univariate forecast profile or under the Model and Parameters tabs of the Forecast view on the demand planning desktop.
Model initialization is the process by which the system determines the necessary model parameters for the chosen forecast model. These parameters are in following link:
http://help.sap.com/saphelp_scm50/helpdata/en/ac/216b74337b11d398290000e8a49608/frameset.htm
I hope this helps you further.
Regards,
Tibor

Determining the reason for a call to Clip.stop( ).

Similar Messages

Maybe you are looking for