Development Environment for Portal development with mini was?

Hello!
is there a mini web-as java version which can be used for local portal development?

Hi,
Are you talking about installation? If so see <a href="https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">downloads</a> area in SDN.
Regards,
Pooja.

Similar Messages

Sytax highlighiting for jsp in Developer Studio for portal development.

Hey,
I am doing JSP with the htmlb taglib for portals. When I edit a jsp page in the Developer Studio, I expect syntax highlighting. This is what I see in the documentation for jsp editing as well - you know where the keywords are highlighted.
Sytax highlighiting for jsp in Developer Studio for portal development.
http://help.sap.com/saphelp_nw04s/helpdata/en/ce/e0a341354ca309e10000000a155106/content.htm
OutputSuccess.jsp, OutputSuccessText.jsp are the two jsp's that are syntax highlighted on this page.
In my Developer Studio this is not the case. Is a JSP editor and its highlighting not part of the Developer Studio. If it is, how do I get it to work.
I also know that given the right taglib's, the editor also gives autocomplete for taglibs with its settings. I am hoping to speed up my development with this.
Right now I am using a text editor for this. There are a couple of jsp plugin's such as exadel or lomboz which I can integrate if a jsp syntax editor is not there in the Developer Studio. I just wanted to know the right way to go about this.
Thank you for your help.
Sumit.

Never mind. I was in the preview mode.

Sytax highlighiting for Jsp Dyn Pages for portal development.

Hey,
I am doing JSP with the htmlb taglib for portals. When I edit a jsp page in the Developer Studio, I expect syntax highlighting. This is what I see in the documentation for jsp editing as well - you know where the keywords are highlighted.
Sytax highlighiting for jsp in Developer Studio for portal development.
http://help.sap.com/saphelp_nw04s/helpdata/en/ce/e0a341354ca309e10000000a155106/content.htm
OutputSuccess.jsp, OutputSuccessText.jsp are the two jsp's that are syntax highlighted on this page.
In my Developer Studio this is not the case. Is a JSP editor and its highlighting not part of the Developer Studio. If it is, how do I get it to work.
I also know that given the right taglib's, the editor also gives autocomplete for taglibs with its settings. I am hoping to speed up my development with this.
Right now I am using a text editor for this. There are a couple of jsp plugin's such as Exadel or Lomboz which I can integrate if a jsp syntax editor is not there in the Developer Studio. I just wanted to know the right way to go about this.
Thank you for your help.
Sumit.

Never mind. I was in the preview mode.

Development Environment for G6

I am having problems creating a development environment for G6.
When I was using Plumtree 5.0, I installed a copy of the Portal on my laptop, installed the MSDE version of SQL Server, and everything worked fine.
Now, when I install G6, the Portal server fails on startup because it cannot connect to the database. I have no idea how to troubleshoot this further, since I can connect to the same database using Query Analyzer. The config tool test db connection feature gives me the same error as the portal server startup.
I noticed that 6.0 is only qualified for Windows 2003. Could this be the problem?
Thanks,
Tim Halbach

MSDE isn't supported for G6 (nor was it ever supported, although it just happened to work). There were a lot of core engine changes, so the database access is no longer compatible with MSDE.
The workaround is to use SQL Server Personal Edition (also free). You're limited to 5 concurrent connections, but it works fine.

Development Environment for Server APIs in Webcenter Interaction 10.3

Hi, I installed “Oracle Web Center Interaction 10.3" on standard environment mentioned by oracle (Window 2003 server, IIS6.0, SQL Server 2005). Everything works fine concerning the portal and services.
I also have visual studio 2005 on the same machine and trying to setup a development environment where I can user server APIs (I start with creating IPTSession).
I am using follwong code to start with:
/String serverConfigDir = ConfigPathResolver.GetOpenConfigPath();
IOKContext configContext = OKConfigFactory.createInstance(serverConfigDir, "portal");
PortalObjectsFactory.Init(configContext);
IPTSession ptSession = PortalObjectsFactory.CreateSession();
Problem: code compiles if I add few dlls, but it do not run, it throws following error
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
I think either server APIs are not more supported in 10.3 or I do not know how to setup the development environment for server APIs.
Can anyone help??

i have already tried putting hardcoded path but it didn't help, morover the previous line gives me correct path.
I issue i mentioned seems to be related with some setting or missing native dlls
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
i got follwing extract from the wsserver-wrapper.log file
INFO | jvm 1 | 2009/02/20 12:26:17 | 2-20-2009 12:26:17.606 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Loading config data from C:\bea\alui\ptws\10.3.0\bin\..\..\..\common/../settings
INFO | jvm 1 | 2009/02/20 12:26:18 | 2-20-2009 12:26:18.325 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Setting subscription data.
INFO | jvm 1 | 2009/02/20 12:26:18 | container config context:EAS:wsserver
i didn't modified anything in any config file, just configured everything on one machine with oracle configuration manager

Development environment for 10g R2

Guys,
I need to setup a development environment for oracle 10g r2 forms development. I am a new to oracle and due to downsizing we lost our DBAs so I am on my own and need your huge support.........
Current settings: Oracle on the server: Oracle 10g R2
My local client installation: 10.1.0.4.2
Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
* Is this a correct development environment? or any incompatibility do you see with this? *
Secondly, I heard various stuff about development environment and would like your input as well:
* Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server where oracle is installed? *
* Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *
Please help me to resolve my confusion so I can present the development environment to my management.....
Thank you soo much...
-Raj
Edited by: user12236377 on Jan 28, 2010 10:55 AM

Current settings: Oracle on the server: Oracle 10g R2
My local client installation: 10.1.0.4.2
Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
* Is this a correct development environment? or any incompatibility do you see with this? *If you want to go with Forms 10G, i would apply the latest patch set (i think its 10.1.2.3, but would suggest to consult Metalink for that)
* Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server >where oracle is installed? *Yes, you can develop "locally" on your PC using only OC4J, but for integrationtests it might be useful to have an "test"-OAS (Oracle Application server 10.1.2)
* Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *For running 10G forms in production you will need an OAS (Oracle Application server 10.1.2), not a WebLogic-server.
As an alternative to 10G, you could also start directly using Forms11G, which is the latest release. In this case you need a WebLogic-Server 11-installation both for development as also for production.

Rising development environment for developers on Forms 11g

We installed Weblogic and oracle forms 11g on windows server. now we should allow our application team to develop and compile forms.
Oracle support claims that we should install on every PC Weblogic in order to make possible forms builder 11g installation.
We are looking for another possibility , because the proccess seams to be very complicated and waisted.
Does anyone know how to rise development environment for developers in Forms 11g?
Thank you.

At this time, you are required to install Oracle WebLogic Server (WLS) in conjuction with Oracle Fusion Middleware (FMw) 11g (Forms/Reports). I agree that the process is more difficult that it should be, but if you use the My Oracle Support document, *"How to Install Fusion Middleware 11g Forms and Reports Only [ID 854117.1]"* as a guide, the installation is much easier. Note: You do need an account with My Oracle Support in order to access this document.
Also, because so many have complained about how "Heavy" the installation is for Forms 11g, Oracle is working on a "Lighter" install. Take a look at Grant Ronald's reply in the thread, Re: Forms/Reports 11g Builder without WebLogic. Unfortunately, there is no time table published when FMw 11g Release 2 will be available, but it is nice that Oracle has listened to our complaints and is working to address this issue.
Craig...

Development environment for SharePoint 2013

Hi,
We have requirement for one of the project. Team size would be approximately 30 resources. Development would be entirely for SharePoint 2013 Intranet solution. this will be OOTB Intranet application. We will be developing InfoPath forms and Nintex Workflows.
For such requirement we would like to setup local development environment by using either Virtual Machines.
Can anyone help me to identify that how many VM's would be required for the same? How many simultaneous users can use and work at a time? What other things I need to consider for infrastructure? How can i suggest the best possible solution for this.
Thanks in advance.
Abhijeet Khopade

Hi,
According to your description, my understanding is that you want to set up the environment for SharePoint Development.
Here is a detailed article about configuring development environment:
Setting up a SharePoint 2013 Development Environment
For VM count, it depends on your project development requirements, for VM license and management ,if you are using Hyper-V, I suggest you can create posts in Hyper-V forum:
Hyper-V forum
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SDSoC development environment for Zynq SoCs and MPSoCs now available

Xilinx has announced the public access release of the SDSoC development environment for Zynq SoCs and MPSoCs. The SDSoC development environment provides a familiar embedded C/C++ application development experience including an easy to use Eclipse IDE and a comprehensive design environment for heterogeneous processing designs based on the Zynq SoC and MPSoC device families.

Sorry about the delay in responding. There isn't a document that spells out the bug fixes right now.
Briefly, the main fixes in 2.0.1 are around:
-Errors related to workspaces having spaces in the path
-Can't stop a server when there's a space in the domain path
-Difficult to create a server against a domain other than the default
-EPL syntax highlighting didn't work in some valid config files.
And a handful of smaller UI oriented fixes.

Does anyone know a good developer magazine for mac development

Does anyone know a good developer magazine for mac development I will be happy to get multiple answers

K T wrote:
And the fact that it's was a vertical, slow-moving, dead-tree, subscription-driven, ad-based business model has nothing at all to do with it... Mac mags died a long time ago, for good reason - get over it
I guess I don't really agree with that. There are still a few Mac magazines around. Interestingly, they are often magazines from the UK. I find it funny that there isn't a big enough market in the US to support homegrown Mac magazines, but they continue to print them in the UK with a much smaller market, and ship them over here. But I digress. I do think the points you cite for the demise of Mac magazines are all incorrect. The same system works just fine for any number of other magazines. The difference is the reader...
Google is your friend.
Now I greatly disagree. Not only is Google not your friend, but it (or rather the internet - it gets hard to tell the two apart anymore) is turning into a massive source of disinformation. There was a time when programmers were expected to read the manual, read magazines, and try things out in order to figure out how to do something. Now, we are expected to just Google it.
Well, I do Google things on a regular basis and I find the advice dispensed to be wrong or otherwise useless more than half the time. Google is on the way out. Information networks are the wave of the future. That is why people come here. Apple Discussions is more reliable than Google.

Development Environment for SP9

Hello,
I need to create some web dynpros in EP 6.0 SP9+. I have eclipse, is there a plug in for eclipse that is compatible with SP9? And, what development environent would you suggest using for developing web dynpros.
regards,
Tom

Hi Thomas,
It's on service.sap.com . Right now the website is down. If the website comes back up then i will post you the exact link.
Try the following link.
https://smpdl.sap-ag.de/~swdc/002007974700000089732005D/JIDE11P_1-10002804.SAR?_ACTION=DL_DIRECT
Message was edited by: Prakash Singh

Development Tool for Portal Component

Hi all,
I am preparing the environment required to develop SAP NetWeaver Portal Component. I've downloaded SAP NetWeaver Developer Studio 7.2, however, I can't create a Portal Application as has been instructed in the SAP documentation. There's is no option as "Portal Application" in the new project creation wizard.
Any help is appreciated.
Thanks.

Hi,
there are many tools for monitoring different stuff on portal in different ways, but as you said you are new i would suggest you to go with manual stuff so that more things can be viewed.
please check below links for more details:
http://help.sap.com/saphelp_nwce10/helpdata/en/2e/30e93adccb444b871f3d4e7f905b84/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/86eb3f0c49f106e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/5a/84b83b3683094be10000000a11402f/content.htm
/people/daniel.wroblewski/blog/2007/01/02/mysteries-of-the-portal-activity-report
/people/daniel.wroblewski/blog/2007/01/17/mysteries-of-the-portal-activity-report-ii
/people/daniel.wroblewski/blog/2007/01/23/mysteries-of-the-portal-activity-report-iii
Regards,
Pavan
Edited by: Pavan Kumar on Jul 22, 2009 12:38 PM

Got lost on Setting up a PHP development environment for Dreamweaver

I am following Dave Powers article on building a dynamic website. I am using Mac 10.6.7 and Dreamweaver CS5. I have downloaded Dave's example file and tried putting it on the desktop that didn't work. Next I tried dragging it into the website folder. That didn't work. Then I tried putting the php_test file into MAMP/hedocs and that didn't work. Where should the file go? I got to 2 green lights on the MAMP and can open the start page. The next step was to put in the time code which I did. It looks fine in design but when I click on "live view" it wants me to save the file. I save it as a php on my desktop. It then tells me I havn't specified a testing server. I have tried several ways of setting up the testing server. I set up the file name as :Local Testing---connect using: Local/Network---for the sever folder I have tried /Applications/MAMP/htdocs/php_test with web url: http://localhost/php_test/ . And I have tried it with: /Users/checkout/Desktop/php_test. Any ideas?
Thanks,
She

Don't have the pro version? That's unfortunate. catch-22 for you... can't get any $$ to buy tools for web development until you start getting $$ developing websites and can't develop websites until you get $$ to buy tools for web development.
You have no doubt learned by now through searching (and REsearching) that virtual host is a MAMP Pro feature. If you're too cheap/poor/whatever to afford $59 for MAMP Pro (but you somehow managed to afford the high price of Dreamweaver) then put your site files in MAMP's host location: Applications/MAMP/htdocs
You said in OP that you did something like that... that you put php_test file (presumably php_test.php with contents unknown to forum readers) in the MAMP directory and could not load the page by visiting http://localhost/php_test
That is probably because you did not specify the file extension in the localhost URL like this: http://localhost/php_test.php
How about this... what exact tutorial are you following (provide a URL) and what exact step in the tutorial are you having trouble with? Or try this: instead of php_test use index.php in htdocs directory. For contents of index.php put <?php phpinfo(); ?> then visit http://localhost and see what happens.

Recommend development environment for Adobe Drive 4

Looking at what is needed for Adobe Drive 4 and I wonder what the recommended development environment is.
Would this suffice:
Adobe Drive 4 SDK
OSX 10.7
Eclipse Juno 4.2 64Bit
JDK 1.6 64bit
Or should I be looking at 32bit versions?
And should I follow what was in the documentation which was older version, 3.6 of Eclipse for instance?

Please take 32 bit application to set up you dev environment, especially, make sure JDK 1.6 32 bit is used.
Regarding Eclipse, 3.6 is recommended

Prerequisites for Portal Development

Dear Community,
I am new in SAP, and it will be really nice to be a part of the Community Network.
I want to know what I am required to know before starting developing Portal in SAP.
And what are the tools and techs required?
Thanks in advance..

Dear Dayasankar,
there is also another alternative.
If you already have knowledge with ABAP, this might be an interesting and easier alternative.
I'm talking about
Webdynpro for ABAP (WD4A) or Businsess Servers Pages (BSP).
...and there is also ITS (Internet Transaction Server). But I would not consider it at all, because it is old and not supported anymore by SAP (I think).
These 2 alternatives might not be considered "pure" Portal developments because they run on the backend.
But if your idea is to develop something to run on the Portal as well, then the 2 alternatives above will work perfectly.
So at the end, depends on what type of development you want to have on your Portal.
Do you need to extract data from the backend and develop some quick applications using transaction SE80 ?
Then please go for WD4A or BSPs.
If on the other hand you want to use the Portal APIs, develop for Portal KM (this is a tool exclusive on the Portal) or you want to integrate with other JAVA components ?
Then go for WD4J (Webdynpro for JAVA) or PAR develoment (Portal Archive componentes) - for all of these you will use JAVA and will need to develop your stuff with NWDS (Netweaver Developer Studio) as already mentioned.
Hope this helps you choose your way.
Kind Regards
/Ricardo Quintas

Development Environment for Portal development with mini was?

Similar Messages

Maybe you are looking for