Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net.
Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solved
Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts
Similar Messages
-
please help...
my computer is not recognizing my ipod classic gen 5. it shows the sad face then i did the basic troubleshooting until logo comes out...
still my computer is not recognizing my ipod.. it still says "Windows has stopped this device because it has reported problems. (Code 43)"See here: iPod displays a sad iPod icon
Note that it's often a good sign of a hardware issue with the iPod's hard drive meaning the iPod will need to be serviced or replaced.
B-rock -
When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?
It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos). -
HT4236 Windows has stopped this device because it has reported problems. (Code 43)
Cpu does not recognize the IPod Nano Gen6 since upgrading to new device and getting this error code...Windows has stopped this device because it has reported problems. (Code 43). I have even uninstalled and reinstalled ITunes...still no joy. Suggestions please??
Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
""windows has stopped this device because it has reported problems. (code 43)"" it says this when i connect my iphone4 to my laptop, and the phone is stuck in recovery mode, wat can i do???
Read http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/code-43-wind ows-has-stopped-this-device-because-it/b9cf1b3e-2b71-4b54-adc6-2dda9c73cd5a
-
I have a workstation with following configurations:
Display adapter NVIDIA Quadra K4000
OS: Windows Server 2012 Standard (64 bit)
Hyper-V virtual GPU: NVIDIA K4000
Hyper-V VM 1: Windows 8 Enterprise 32 bit
Hyper-V VM 2: Windows 8.1 Enterprise 64 bit
Both the 2 VMs above has the RemoteFX video adapter added and are supposed to have RemoteFX display working.
However it only works in the VM 1 (Windows 8). In the VM 2 (Windows 8.1) the display adapter (Microsoft RemoteFX Graphics Device - WDDM) is reported "Windows has stopped this device because it has reported problems (Code 43)"
Anyone ever experienced a similar issue?
Much appreciated :)
Hi leon,
I am currently standing by for an update from you and would like to know how things are going on your end. Should you have any questions or concerns with the
suggestions I provided, please don't hesitate to let me know.
Regards,
Kelvin hsu
TechNet Community Support -
HT1386 Windows has stopped this device because it has reported problems. (Code 43)
Windows has stopped this device because it has reported problems. (Code 43)
When I try to sync to windows 7 machine has been synced before.Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43)
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43) what does it mean
-
Windows has stopped this device because it has reported problems. (Code 43)
ipod touch is not recognized by windows 7 64bit system please help
Maybe here:
error code 43 when USB not recognised - Microsoft Answers -
This issue started after I updated to ios 5.0.1.
The answer is in iTunes/ help files/ Sync
To prevent unprompted syncing for all iPod, iPhone, and iPad devices:
In iTunes, choose iTunes > Preferences.
Click Devices.
Select “Prevent iPods, iPhones, and iPads from syncing automatically.”If this checkbox is selected, any connected iPod, iPhone, or iPad won’t sync without being prompted.
Now you can plug in the iPhone, when you want to sync you access that thru the device itself -
Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help
mithaani wrote:
Got an (unlocked) iphone 4s from US
As kb1951 states, unless this phone was purchased directly from Apple, it is not officially unlocked. In the US, only Apple sells officially unlocked iPhones. The message you got generally means your phone was hacked to unlock it...jailbroken...Apple's servers have detected such & are preventing your phone from activating...there's nothing wrong with the activation servers.
You'll need a sim card from the carrier your phone is locked to in order to activate it. If you don't know what carrier, you'll have to call AppleCare in the US to determine this info. Be aware, US carriers will not authorize official unlocking unless you are a customer that used the phone on their network. Thus, there is most likely no way for you to get this phone officially unlocked.
Good luck. -
Just updated iTunes to 10.6.0.40. Now it does not detect my iPhone (prompt says reconnect, could not detect). Tried restarting and different USB port. What next asside from system restore with my Windows 7.Cannot Sync or get photos. Have 3Gs with os4.
I removed iTunes completely, then reinstalled. Still not identifying phone. When iPhone connected, prompt says "iPhone detected, could not be identified properly. Unplug and try again." Still not working.
Tried by installing previous version of iTunes (10.5.0.142) which did worked. Would not open iTunes because it had been previously installed with a newer version.
Sucessfully reinstalled ver 10.6.0.40 again. Then tried again by removing iTunes, iCloud and QuickTime. Reinstalled iTunes 10.6.0.40 and same problem, detected iPhone but could not identify properly. What next? -
my sony vaio laptop with windows 7 ultimate OS does not detect my iphone thru itunes 11.1.0.126. Any suggestions how to fix this?
windows 8 has been out long enough to have fixed this issue you would think Its bad enough my last computer hard drive went out and i lost all on it but now i cant backup my phone so if I lose it or something happens to it Ill be in bad shape lol PLEASE fix this issue!!! Too much info to store on Icloud but could be apples way of getting people to use the icloud and buy extra storage on icloud
-
ITunes 10 does not detect my iPhone
i recently upgraded to itunes 10, and i have a 1st gen iphone. after upgrading, i synced my iphone and everything went fine. soon after that, i had a totally unrelated hard disk drive failure. luckily all my data were backed up, apple replaced my hard disk, and i restored all my data. however, when i tried to connect my iphone to itunes to sync, itunes would not detect the iphone. i tried many fixes, the only one that worked was to reinstall itunes 10 (which is a pain, because you have to get rid of lots of files.) last night, after reinstalling itunes 10, i connected my iphone and itunes detected it and synced. i thought the issue was solved for good and maybe was related to the restoring of the backed up data. however, i just tried to sync again, but the problem has re-appeared. my itunes does not detect my iphone.
the console message i get is as follows:
9/7/10 3:56:17 PM usbmuxd[30] connect_toport (thread 0x100581000): Could not connect to USB mux port 32498 for device 2: Connection refused
9/7/10 3:56:17 PM usbmuxd[30] MobileDeviceConnectlocked (thread 0x100581000): Could not connect to lockdown port on device bac8e3086978950d97c077103aa8996ccb56eec1.
9/7/10 3:56:17 PM usbmuxd[30] _MobileDevicePairWorker (thread 0x100581000): Pair worker (0x0x100581000) could not connect to lockdownd: kAMDMuxConnectError
i thought that usbmuxd is built for linux, but is it doing in itunes 10? but it must belong to it, because i also got this (i think when booting, but i am not sure):
9/7/10 3:33:40 PM com.apple.usbmuxd[30] usbmuxd-201 built for iTunesTen on Aug 12 2010 at 17:33:03, running 64 bit
what is going on? i don't want to reinstall the **** itunes every time i have to sync. any solution? thanksHere is the diagnostics test ran within iTunes (under help tap inside iTunes).
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 3000
iTunes 10.0.0.68
QuickTime 7.6.7
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number BXXXXXXXXXX
Current user is an administrator.
The current local date and time is 2010-09-17 01:08:36.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Video Display Information
Intel(R) 82865G Graphics Controller
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.0.68 is currently running.
iTunesHelper 10.0.0.68 is currently running.
Apple Mobile Device service 3.2.0.0 is currently running.
** Device Sync Tests **
*No iPod, iPhone, or iPad found.*
Please help!!!!!! -
Hi,
I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
Rebooted the computer
Rebooted the iPhone
plugged and unplugged the USB cable multiple times and to various USB ports
Uninstalled and installed the i-Tunes
Signed out the iTunes and signed in again
my USB cable and ports are all ok
my ios version on iPhone is : 7.4.4
my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
I appreciate your help.I find this on another post and tried it. It WORKED. I had to modify to fit my situation but give it a try. Good luck.
Go to Windows 8.1 Control Panel.
Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
Right-click, then select properties on the menu list.
Under the "Driver" tab menu, confirm the update driver button is not greyed out. If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
Select "Update Driver".
Select and click "Browse my computer for driver software".
For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Click Next, and let the driver re-install.
iTunes 11.1.4.62 should open automatically if your iphone is connected already.
Maybe you are looking for
-
For each loop and modification of a LinkedList
When going thourhg my LinkedList with a for each loop, I want to do a modification. I just saw that it cast a ConcurrentModification Exception, so it seems I can't do that. How should I do then? I don't want to go through all the list each time an ob
-
Fair Usage - but how do you tell??
Yesterday morning I had an automated email from BT saying that I was up to 80GB d/l for May, and that my speed would be throttled if I went over 100GB. I'm on Option 3, and this is the fair usage policy kicking in. This morning I had another email sa
-
Open event files soundtrack pro
I don't know if this is part of the software or another glitch on my end, but i had a soundtrack that I created for my movie and I imported into my event, cut everything together, then discovered I had an error in my audio so I opened it in soundtrac
-
Hi- I'm having a problem configuring my email accounts for my iPhone. I currently use an Exchange email account through school, linked to Outlook 2007 on my computer (PC). I also have a couple of Gmail and Yahoo accounts that I like to download to my
-
Planned depreciation not showing for posting period
hi, I have query for planned depreciation. my company code is having following setting. 1. check "dep to the day" is there. 2. in Fiscal year Variant for the period 7 & 8 the setting is as below. month day period 8 1 7 8 29