Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

Similar Messages

Whole clips not tranfering from log and transfer into FCP studio 2

720p 24p clips from P2 get cut short when transfered from log and transfer. I can play the whole clips in the log and transfer window to verify they are there but once they are brought into my project they play about half way through, then the sound drops out and the clip stops short of where it really ended. the clips in the canvas window or on the timeline when played all the way to the end are not the complete original clip? i have tried switching every setting i can think of but to no avail. any ideas out there? thanks a million

no, no in or out points set in log and capture. what's wierd is that clips shot at 24 fps are the ones running short and clips shot at 60 fps come in fine (the slow motion isn't happening but i think i can change that with cinema tools?) anyway, thanks for the suggestion

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Polarioid pogo printer not working with ipad and iphone

And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo. Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind. This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
I come from a photograpic background. I got the Pogo as soon as it came out. I quite literally was on Polaroid's website every day checking to see when I could order it. Having "instant" sticker prints is wonderful at family picnics with all the kids. While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released. So I took that as the sign that it was probably never going to happen. (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me. But, yes, it would be nice.)
I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints. Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340. But it's still Bluetooth only. So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon. IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing. But considering Polaroid's financial issues, I'm not holding my breath

HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

Check with your carrier or telephone service provider. Not all carriers provide this service.

My iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case. Any ideas why I cannot update iPhoto?

my iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case. Any ideas why I cannot update iPhoto?

How did you buy iPhoto? Did it come preinstalled on your computer with Lion or later, or did it come with Snowleopard on system installer disks?
Which version of iPhoto?
If you have a version of iPhoto '11 and it is showing on the Purchased tab of the App Store, with your Apple ID, then delete iPhoto from the Applications folder (don't empty the Trash) and download iPhoto again from the Purchased tab.
If that does not work, contact The App Store Support from the Quick Links on the AppStore main page.
Only apple Support can fix problems with apple ID.

SONY XDCAM LOG and TRANSFER CRASHING FCP

I am trying to log and transfer xd cam footage. every time i open the log and transfer window, FCP crashes. What is the cleanest way to get rid of the xdcam plugin.
the error message reads:
The application Final Cut Pro quit unexpectedly after it was relaunched. The problem may have been caused by the SonyXDCAM plug-in.
I have tried to get rid of it and obviously failed because i keep getting that message which tells me it's still there.
Can someone give me a step by step on how to get rid of it?
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz

Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Refresher for log and transfer in FCP 7

Hi,
I need a bit of a refresher to using log and transfer in FCP 7 what setting do I use for XDCAM ? Do I set it to AVCHD?
Please help
Thank you
Jeff

Have you loaded the xdcam plug in?
https://discussions.apple.com/docs/DOC-2721
Otherwise, I think you have the choice of keeping it as xdcam or converting to prores when you log and transfer. xdcam are smaller file sizes, while prores is generally less taking on the system.

Not all files work in log and transfer

Hoping maybe someone has found a fix to this issue...
When editing an HDV project not all my .m2t files (all in the same folder) want to transfer using Log and Transfer. Most of the files will transfer correctly but sometimes it skips a file and puts a red exclamation mark in the status. Not sure why most files work and a few don't when they are all from the same folder and from the same shoot. The files will open fine in other 3rd party apps so the files are ok.
Thanks in advance for any help!
Mike

Mike Cole1 wrote:
Not sure why most files work and a few don't when they are all from the same folder and from the same shoot. The files will open fine in other 3rd party apps so the files are ok.
FCP may be a bit more discriminating on the file structure or header integrity, dunno, never shot HDV myself but we've seen similar posts for years. Try copying the files to your drive first and then ingesting.
Side note, ust because other apps can open the files doesn't mean they are intact or useable. You don't mention what these apps are but if you can export form them, do that and then ingest the new file which might have all of its glitches reparied to suit FCP.
bogiesan

Problem with Log and transfer using AVCHD

Hello,
I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
I will appreciate your help!
Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...

OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
Edited the entire project there...kinda sucked...
Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
So it working again...here I go editing on FC after I edited the entire project on Imovie...
Thanks for all your help!

Camera is not Appearing in Log and Transfer Window

Hello All,
I feel like I should be able to solve this on my own, but I'm stuck. I've been using a Cannon HF S10 (AVCHD) for a few months. Up until about a week ago when I have connected the camera to my iMac and opened the Log and Transfer window all of the clips on the camera have appeared, but now they don't. I had this happen another time with a different camera and and after trashing the FCE preferences I was able to see the clips in the L&T window. So I trashed the FCE preferences, but this time I still do not get the clips in the L&T window.
The camera mounts to my desktop and also appears in Finder, so I tired clicking on the "Add Folder" button on the top left corner of the L&T screen and adding "CANNON". This did not produce the clips in the L&T widow. I also tried to add the folder that is one level down labeled "AVCHD", but this did not work either.
Any direction would be greatly appreciated. Thanks, in advance.
Marc

Ok...nevermind. All of the thumbnails appeared. There are a lot of clips on the camera, so I'm guessing that this is the reason for the lengthy loading time.
Marc

Log and transfer causes FCP to crash with long clips

Hi. I am trying to import a few 2 hour+ clips using Log and Transfer from my Sony NX5. Once the destination clip has reached approx 60GB, FCP crashes every time. There is plenty of disk space left.
I have tried trashing preferences and also changing scratch disks. I am turned off time machine. I am really worried that I wont be able to get this footage onto my machine.
Any ideas?
Thanks

In the end Clipwrap saved the day on this project.
This did happen to me again though on yet another project, where the files were around an hour long this time. In the end I got it to work, not sure the solution but tried the following:
- Selected a different easy setup (choose PAL) - this fixed the problem for a colleague of mine, even though it doesn't seem logical
- Used my internal drive as a scratch disk instead of my firewire drive (normally this is not a problem)
I haven't tried this with the really long clips, as Clipwrap saved me.
Many thanks for suggestions.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

VM Manager's Launch Console not working with OpenJDK and IcedTea

Fedora 15
java-1.6.0-openjdk-1.6.0.0-59.1.10.3.fc15.x86_64
icedtea-web-1.0.4-1.fc15.x86_64
ICEDTEA-WEB NOTES
Invalid XML
An error like
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1203)
indicates that the JNLP file is not valid XML. The error happens because netx uses an XML parser to parse the JNLP file. Other JNLP client implementations may use more lenient parsers and may or may not work with the given JNLP file. Errors caused by malformed JNLP files can often lead to subtle bugs, so it is probably best to fix the JNLP file itself. A tool like xmlproc_parse might be able to pinpoint the error.
XMLPROC_PARSE OUTPUT
$ xmlproc_parse ovm_rasproxy-ws.jnlp
xmlproc version 0.70
Parsing 'ovm_rasproxy-ws.jnlp'
E:ovm_rasproxy-ws.jnlp:3:89: Undeclared entity 'machineName'
E:ovm_rasproxy-ws.jnlp:3:89: ';' expected
Parse complete, 2 error(s) and 0 warning(s)
JAVAWS OUTPUT
$ javaws ovm_rasproxy-ws.jnlp
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
JAVAWS -VERBOSE OUTPUT
$ javaws -verbose ovm_rasproxy-ws.jnlp
No User level deployment.properties found.
Starting security dialog thread
JNLP file location: ovm_rasproxy-ws.jnlp
Status: CONNECTED DOWNLOADED STARTED +(CONNECTED DOWNLOADED STARTED) @ ./ovm_rasproxy-ws.jnlp
<?xml version="1.0" encoding="UTF-8"?>
line: 2 <jnlp spec="1.0+" codebase="http://192.168.4.21:7001/ovm/rasproxy/"
line: 3 href="ovm_rasproxy-ws.jnlp?vmachineId=0004fb0000060000046ffdb8a331ce21&machineName=mytestmachine">
line: 4 <information>
line: 5 <title>Oracle VM Remote Access Service</title>
line: 6 <vendor>Oracle</vendor>
line: 7 <homepage>http://support.oracle.com/</homepage>
line: 8 </information>
line: 9 <resources>
line: 10
line: 11 <j2se version="1.5+"
line: 12 href="http://java.sun.com/products/autodl/j2se" />
line: 13 <jar href="ovm_rasproxy-signed.jar" main="true" />
line: 14 <jar href="OvmCoreApi.jar" />
line: 15 <jar href="MgmtUtil.jar" />
line: 16 <jar href="Odof.jar" />
line: 17 <jar href="commons-logging-1.1.1.jar" />
line: 18 </resources>
line: 19
line: 20
line: 21 <application-desc main-class="com.oracle.ovm.ras.proxy.RasProxyApplet">
line: 22 <argument>-server</argument>
line: 23 <argument>192.168.4.21</argument>
line: 24 <argument>-service</argument>
line: 25 <argument>003600010004fb0000060000046ffdb8a331ce21</argument>
line: 26
line: 27 </application-desc>
line: 28 <security>
line: 29      <all-permissions/>
line: 30 </security>
line: 31 <update check="background"/>
line: 32 </jnlp>               net.sourceforge.jnlp.ParseException: Invalid XML document syntax.
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
     at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
Caused by: net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
     at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
     at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
     at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
     at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
     at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
     ... 8 more
Caused by:
net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
     at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
     at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
     at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
     at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
     at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
     at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
     at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
     at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
     at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)

Both realvnc 4.1.3 and tigervnc 1.1.0.1 work on the Linux side.
I was able to get the console to work by wiping the contents of the directory I created at the beginning of this exercise and then copying in a fresh OVM 3.0.2 created ovm_rasproxy-ws.jnlp file.
[gordon@ufo Downloads]$ rm /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/*
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
     at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
netx: Unexpected java.io.IOException: /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ovm_rasproxy-ws.jnlp (No such file or directory) at net.sourceforge.jnlp.JNLPFile.openURL(JNLPFile.java:255)
[gordon@ufo Downloads]$ cp ovm_rasproxy-ws.jnlp /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/
[gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
     at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
     at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
     at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
     at java.security.AccessController.doPrivileged(Native Method)
     at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
java.io.EOFException
     at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
     at java.io.DataInputStream.readUTF(DataInputStream.java:589)
     at java.io.DataInputStream.readUTF(DataInputStream.java:564)
     at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
     at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
     at java.security.KeyStore.load(KeyStore.java:1201)
     at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
     at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
     at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
     at net.sourceforge.jnlp.tools.JarSigner.checkTrustedCerts(JarSigner.java:414)
     at net.sourceforge.jnlp.tools.JarSigner.verifyJars(JarSigner.java:269)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.verifyJars(JNLPClassLoader.java:946)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.initializeResources(JNLPClassLoader.java:422)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:169)
     at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:283)
     at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:650)
     at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:436)
     at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:830)
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: Server : 192.168.4.16
Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: service id : 003600010004fb0000060000281734f86e6aab47
Oct 4, 2011 4:13:42 PM com.oracle.ovm.ras.proxy.external.VncViewerLauncherFactory getVncViewerLauncher
INFO: Os is : linux
Oct 4, 2011 4:13:53 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
INFO: DONE SSL Handshaking
The console starts and all is well with the world.
This is obviously not how one would want to start a console by downloading the .jnlp file and running it on the command line so I am now going to remove the /home/gordon/.icedtea/cache/http/* and see what happens.
First, let me say that nothing happened. It did not work. I did confirm that it creates the directory structure again /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ but there is only one file in the directory.
[gordon@ufo rasproxy]$ cat ovm_rasproxy-ws.jnlp.info
#automatically generated - do not edit
#Tue Oct 04 16:43:29 EDT 2011
last-modified=0
last-updated=1317761009801
content-length=883
If I save that ovm_rasproxy-ws.jnlp file instead of opening it and copy it to the /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ directory the console will now start successfully with one minor drawback - it will only launch that one VM based on the .jnlp file that I downloaded.
Help?

Device not working with Log and Transfer in FCP

Similar Messages

Maybe you are looking for