Device radio

How to switch on device radio for updating latest blackberry app world?

EiEi wrote:
How to switch on device radio for updating latest blackberry app world?
Hi EiEi,
On your home screen, sclide your trackpad to the top header and click it. Check Mobile Network checkbox.
Note: You need sufficient BlackBerry data service.
Hope it helps.
Good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

What is the meaningof Device Radio Off ???

BlackBerry App World requires that your device radio is turned on to continue.

okololg wrote:
BlackBerry App World requires that your device radio is turned on to continue.
This means your device need to be connected with your carrier network. In other words, SIM card need to be inserted and device should be turned on and connected.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Blackberry device radio off??

i tried downloading an app to my phone but it said my device radio is off??...i have no clue what that is and im not sure if that has to do with the fact that i have internet shut off on my phone???....can somebody helpp?

It means that the "Wireless Signal" to the mobile network is not selected. Open the Tray and select Manage Connections and be sure that the option for Mobile Network is selected.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Exporting build - destination devices radio buttons are not there

I created an ios project using flash builder 4.5. but when i go to export a final build the target device radio buttons are not there on the interface. it has to be an installation issue but i've uninstalled and reinstalled multiple times with no success. has anyone else had this issue?
thanks

here is a screen shot

BlackBerry App World requires that your device radio is turned on to continue.

I no longer have a service provider for my Blackberry. But I want to use it for listenting to Audio Books. Can I still do this without internet service on the phone itself?
Initially it appeared as though I could, so long as I had it connected to my computer which was connected to the internet. Initially, System Check told me that the AppWorld Browser plug-in was installed on the computer, and also that the device was connected to the computer. It then locked up when trying to load the latest version of AppWorld on the Smartphone. I've rebooted both since and now it tells me that I need the radio on to perform this task. ANy ideas?

Hello mtyler,
The following article will provide you with more information on the minimum requirements for the BlackBerry App World™ storefront:
Minimum requirements for BlackBerry App World - http://www.blackberry.com/btsc/KB17659
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

How to turn on radio device?

i have use curve 3G handset. i open BB's website through my computer net.and connect BB with computer. my problem is this.. there are blink 1 error.."turn on ur device radio" . then how to radio turn on?? this error is blink sometimes not every time....pls. give me solution...on my mail ID.

Having the radio turned on simply means that you're connected to your mobile network. When your radio is turned on, you can see the name of your cell carrier on your homescreen at the top middle.
To turn on your radio, click Manage Connections on your homescreen and make sure Mobile Network is checked.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

FM Radio Application for Windows 8

I am trying to develop a simple FM Radio Application for Windows 8 phones. I found one class but it says it will not work for devices targeting windows 8. Can some one please help.
https://msdn.microsoft.com/en-us/library/windows/apps/microsoft.devices.radio.fmradio(v=vs.105).aspx

It's been a long time since I last answered an FM radio question so I might be forgetting some details but basically...
In Windows Phone 7 timeframe the FM radio hardware was part of the requirements but for Windows Phone 8 FM radio hardware was optional and, in fact, the FM Radio drivers were not available until build 8.0.10322.
I cannot recall if the restriction regarding FMRadio API for Windows Phone 8 targeted applications mentioned in the MSDN documentation, is enforced during submission to the store but I know it is possible to use the APIs in a Windows Phone 8 targeted project
during development (...requires: ID_CAP_MEDIALIB_AUDIO I believe.)
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Getting a message saying that I'm not connected to radio when I try to download an app

OK, for the past 4 hours I've been trying to download something, each time to be greeted with the same message, needless to say rage is building. I have seen many other threads discussing the same thing but an answer has never actually been given. The exact message I get is this;
Device Radio Off
BlackBerry App World requires that your device radio is turned on to continue.
I can assure you, my radio is most certainly on.
An answer ASAP would be appreciated, there will be prizes.
Thanks in advance

Have you gotten anywhere with your issue? I've still got nothin.

I Can't Turn my radio on

Hi I have the Blackberry 8800 and I want to download some apps but it says
"Device Radio Off
BlackBerry App World requires that your device radio is turned on to continue."
Can anyone help me

hustlerlady7 wrote:
I am having the same problem as of this morning on my Blackberry.!!!!
I am under manage connections, I have all boxes checked off, but the mobile network doesn't stay checked just the wifi and bluetooth. I have gone under mobile network options and "data services" is on, "roaming" is on ....
It's not letting me turn this "radio" on ...where is it?
Can I reset my phone?
Ugghhhh this is soooo annoying!
Thank you for who ever can try and help with my Blackberry Curve...
Hi and Welcome to the Forums!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Apple phone/radio bluetooth disconnect turns on phone speaker (music)

I recently added an automobile radio that connects (streams music & phone call ops) without any concerns. However, when I turn off the functioning paired radio device the music, whether itunes, pandora or independent radio stream for actual examples, soon starts playing via the iphone speaker as I walk away from the vehicle. It happens every time and can become frustrating and embarrassing as I need to get past the security lockout in order to stop the music source (pause play) which is usually loud.
I have numerous bluetooth devices, radios and speakers that previously worked fine, unlike this instance, and I think they continue to do so... Which is why I expect the same.
Any suggestions?

See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing.

N86 Where are radio stations saved? And playlists?

Hello to all. In FP1 devices, we had available the files of the radio stations list and of the playlists we create in music application. So, if we wanted to take backup of them, we could do so.
Where are these files in FP2 devices, and especially N86?

In FP1 devices radio stations are stored in c:drive. Its in .rb format. Also playlist isn't in music application. I dont know its exact location but i think you could just take a backup of memory to save those playlist of yours. Don't know what N86 offers?
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

HP cp2025dn printing problem

hi there,
i hope there is some help out there, since i have absolutely no idea what else i could try to make my printer work via airport, which has until now worked perfectly well via direct usb connect.
via airport either way (ip or bonjour) print jobs will disappear from the printer queue, cause the printer to flash its fancy lights but never get printed or will force the printer into paused state.
i have my hp color laserjet cp2025 connected to a fresh airport express which is extending my wireless network provided by my elderly airport extreme. here is some data about their firmware and the network:
firmware: 7.4.2 on both devices
radio mode: 802.11.n (802.11b/g compatible)
channel: 2
security: wpa/wpa2 personal
additionally i will attach the rather lengthy printer log of my recently failed attempt, which hopefully gives some apple genius a clue of why the bugger resists printing.
any help is being appreciated.
sincerely
peter
E [21/Nov/2010:01:20:14 +0100] [Job 3] Unable to write print data: Broken pipe
D [21/Nov/2010:01:20:14 +0100] [Job 3] The following messages were recorded from 01:20:08 to 01:20:14
D [21/Nov/2010:01:20:14 +0100] [Job 3] Adding start banner page "none".
D [21/Nov/2010:01:20:14 +0100] [Job 3] Queued on "hphomebonjour" by "pkubin".
D [21/Nov/2010:01:20:14 +0100] [Job 3] Auto-typing file...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Request file type is application/vnd.cups-banner.
D [21/Nov/2010:01:20:14 +0100] [Job 3] File of type application/vnd.cups-banner queued by "pkubin".
D [21/Nov/2010:01:20:14 +0100] [Job 3] Adding end banner page "none".
D [21/Nov/2010:01:20:14 +0100] [Job 3] job-sheets=none,none
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[0]="hphomebonjour"
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[1]="3"
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[2]="pkubin"
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[3]="testprint"
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[4]="1"
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[5]="APColorMatchingMode=APApplicationColorMatching APDInputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=12970 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1294 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 media=A4 pserrorhandler-requested=standard job-uuid=urn:uuid:df6431a4-4123-39cc-4f92-4506b9f2c6cc job-originating-host-name=localhost time-at-creation=1290298808 time-at-processing=1290298808 PageSize=A4"
D [21/Nov/2010:01:20:14 +0100] [Job 3] argv[6]="/private/var/spool/cups/d00003-001"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[0]="<CFProcessPath>"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[9]="HOME=/private/var/spool/cups/tmp"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[11]="[email protected]"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[12]="SOFTWARE=CUPS/1.4.5"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[14]="USER=root"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[17]="IPP_PORT=631"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[18]="CHARSET=utf-8"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[19]="LANG=en_US.UTF-8"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[20]="APPLE_LANGUAGE=en-US"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[21]="PPD=/private/etc/cups/ppd/hphomebonjour.ppd"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[22]="RIPMAXCACHE=8m"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[24]="DEVICEURI=dnssd://hp_home._pdl-datastream.tcp.local./?bidi"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[25]="PRINTERINFO=hphome bonjour"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[26]="PRINTERLOCATION=homelandexpress"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[27]="PRINTER=hphomebonjour"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[28]="CUPS_FILETYPE=document"
D [21/Nov/2010:01:20:14 +0100] [Job 3] envp[29]="FINALCONTENT_TYPE=printer/hp_homebonjour"
D [21/Nov/2010:01:20:14 +0100] [Job 3] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 964)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Started filter /usr/libexec/cups/filter/cgpdftops (PID 965)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Started filter /usr/libexec/cups/filter/pstops (PID 966)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 967)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Started backend /usr/libexec/cups/backend/dnssd (PID 968)
D [21/Nov/2010:01:20:14 +0100] [Job 3] load_banner(filename="/private/var/spool/cups/d00003-001")
D [21/Nov/2010:01:20:14 +0100] [Job 3] cgpdftops - copying to temp print file "/private/var/spool/cups/tmp/003c54ce8a655"
D [21/Nov/2010:01:20:14 +0100] [Job 3] Resolving "hphome._pdl-datastream.tcp.local."...
D [21/Nov/2010:01:20:14 +0100] [Job 3] STATE: +connecting-to-device
D [21/Nov/2010:01:20:14 +0100] [Job 3] Resolving "hp_home", regtype="pdl-datastream.tcp", domain="local."...
D [21/Nov/2010:01:20:14 +0100] [Job 3] hpPostProcessing launchedINFO: Looking for printer...
D [21/Nov/2010:01:20:14 +0100] [Job 3]
D [21/Nov/2010:01:20:14 +0100] [Job 3] Setting language to en-US
D [21/Nov/2010:01:20:14 +0100] [Job 3] Resolved as "socket://homeland-express.local.:9100"...
D [21/Nov/2010:01:20:14 +0100] [Job 3] STATE: -connecting-to-device,offline-report
D [21/Nov/2010:01:20:14 +0100] [Job 3] Executing backend "/usr/libexec/cups/backend/socket"...
D [21/Nov/2010:01:20:14 +0100] [Job 3] STATE: +connecting-to-device
D [21/Nov/2010:01:20:14 +0100] [Job 3] Looking up "homeland-express.local."...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Connecting to homeland-express.local.:9100
D [21/Nov/2010:01:20:14 +0100] [Job 3] Connecting to printer...
D [21/Nov/2010:01:20:14 +0100] [Job 3] STATE: -connecting-to-device
D [21/Nov/2010:01:20:14 +0100] [Job 3] Connected to printer...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Connected to [fe80::7aca:39ff:fe45:2549%en1]:9100 (IPv6)...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Page = 595x842; 12,12 to 583,830
D [21/Nov/2010:01:20:14 +0100] [Job 3] Final document orientation - 0
D [21/Nov/2010:01:20:14 +0100] [Job 3] Entered function
D [21/Nov/2010:01:20:14 +0100] [Job 3] Entered function
D [21/Nov/2010:01:20:14 +0100] [Job 3] Pages per sheet - 1
D [21/Nov/2010:01:20:14 +0100] [Job 3] Orientation - portrait
D [21/Nov/2010:01:20:14 +0100] [Job 3] ------------------------------------------------------
D [21/Nov/2010:01:20:14 +0100] [Job 3] Pre-processing tasks:
D [21/Nov/2010:01:20:14 +0100] [Job 3] Line - %%BeginDocument Processor - EmbeddedDocumentCounter "" (pre, optional, substr)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Line - %!PS-Adobe Processor - EmbeddedDocumentCounter "" (pre, optional, substr)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Line - %%EndComments Processor - DriverVersion "Insert driver info" (pre, mandatory, substr)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Post-processing tasks:
D [21/Nov/2010:01:20:14 +0100] [Job 3] Line - %%BeginProlog Processor - Accounting "Insert LaserJet accounting information" (post, mandatory, substr)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Line - %%Page: Processor - PageAccounting "Log page for accounting" (post, mandatory, substr)
D [21/Nov/2010:01:20:14 +0100] [Job 3] ------------------------------------------------------
D [21/Nov/2010:01:20:14 +0100] [Job 3] Entered function
D [21/Nov/2010:01:20:14 +0100] [Job 3] Using line-by-line file iteration...
D [21/Nov/2010:01:20:14 +0100] [Job 3] cgpdftops - using PPD file "/private/etc/cups/ppd/hphomebonjour.ppd"...
D [21/Nov/2010:01:20:14 +0100] [Job 3] PS Matching Mode = AP_ApplicationColorMatching
D [21/Nov/2010:01:20:14 +0100] [Job 3] cgpdftops - languageLevel = 3, mediaBox.size.width = 595, mediaBox.size.height = 842
D [21/Nov/2010:01:20:14 +0100] [Job 3] cgpdftops - documentMediaBox.size.width = 595, documentMediaBox.size.height = 842
D [21/Nov/2010:01:20:14 +0100] [Job 3] Page = 595x842; 12,12 to 583,830
D [21/Nov/2010:01:20:14 +0100] [Job 3] slow_collate=0, slow_duplex=0, slow_order=0
D [21/Nov/2010:01:20:14 +0100] [Job 3] Before copy_comments - %!PS-Adobe-3.0
D [21/Nov/2010:01:20:14 +0100] [Job 3] %!PS-Adobe-3.0
D [21/Nov/2010:01:20:14 +0100] [Job 3] %APLDSCEncoding: UTF8
D [21/Nov/2010:01:20:14 +0100] [Job 3] %APLProducer: (Version 10.6.5 (Build 10H574) Quartz PS Context)
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%Title: (testprint)
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%Creator: (cgpdftops CUPS filter)
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%CreationDate: (Sunday, November 21 2010 01:20:09 CET)
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%For: (pkubin)
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%DocumentData: Clean7Bit
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%LanguageLevel: 3
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%Pages: 1
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%BoundingBox: (atend)
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%PageOrder: Ascend
D [21/Nov/2010:01:20:14 +0100] [Job 3] %%EndComments
D [21/Nov/2010:01:20:14 +0100] [Job 3] Before copy_prolog - userdict/dscInfo 5 dict dup begin
D [21/Nov/2010:01:20:14 +0100] [Job 3] Before copy_setup - %%BeginSetup
D [21/Nov/2010:01:20:14 +0100] [Job 3] Before page loop - %%Page: 1 1
D [21/Nov/2010:01:20:14 +0100] [Job 3] Copying page 1...
D [21/Nov/2010:01:20:14 +0100] [Job 3] pagew = 571.1, pagel = 817.6
D [21/Nov/2010:01:20:14 +0100] [Job 3] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [21/Nov/2010:01:20:14 +0100] [Job 3] PageLeft = 12.0, PageRight = 583.1
D [21/Nov/2010:01:20:14 +0100] [Job 3] PageTop = 829.7, PageBottom = 12.1
D [21/Nov/2010:01:20:14 +0100] [Job 3] PageWidth = 595.0, PageLength = 842.0
D [21/Nov/2010:01:20:14 +0100] [Job 3] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
D [21/Nov/2010:01:20:14 +0100] [Job 3] Calling processor DriverVersion before line %%EndComments
D [21/Nov/2010:01:20:14 +0100] [Job 3] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
D [21/Nov/2010:01:20:14 +0100] [Job 3] Calling processor Accounting after line %%BeginProlog
D [21/Nov/2010:01:20:14 +0100] [Job 3] Task "Insert LaserJet accounting information" complete. Processor - Accounting. Line - %%BeginProlog
D [21/Nov/2010:01:20:14 +0100] [Job 3] Current page number is 0
D [21/Nov/2010:01:20:14 +0100] [Job 3] Calling processor PageAccounting after line %%Page: 1 1
D [21/Nov/2010:01:20:14 +0100] [Job 3] PAGE: 1 1
D [21/Nov/2010:01:20:14 +0100] [Job 3] hrDeviceDesc="Unknown"
D [21/Nov/2010:01:20:14 +0100] [Job 3] prtGeneralCurrentLocalization type is 0, expected 2!
D [21/Nov/2010:01:20:14 +0100] [Job 3] backendRunLoop(print_fd=0, device_fd=5, snmp_fd=7, addr=0x100109768, use_bc=1, side_cb=0x1d51f9558)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Wrote 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Read 8192 bytes of print data...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Set job-printer-state-message to "Unable to write print data: Broken pipe", current level=ERROR
D [21/Nov/2010:01:20:14 +0100] [Job 3] Print file sent, waiting for printer to finish...
D [21/Nov/2010:01:20:14 +0100] [Job 3] Received SIGPIPE
D [21/Nov/2010:01:20:14 +0100] [Job 3] Backend returned status 1 (failed)
D [21/Nov/2010:01:20:14 +0100] [Job 3] Printer stopped due to backend errors; please consult the error_log file for details.
D [21/Nov/2010:01:20:14 +0100] [Job 3] End of messages
D [21/Nov/2010:01:20:14 +0100] [Job 3] printer-state=5(stopped)
D [21/Nov/2010:01:20:14 +0100] [Job 3] printer-state-message="Print file sent, waiting for printer to finish..."
D [21/Nov/2010:01:20:14 +0100] [Job 3] printer-state-reasons=paused

You may want to verify that your printer USB cable is of good condition; try swapping it with another one.
The problem is "Unable to write print data: Broken pipe" which implies that the USB connection was somewhat abruptly broken/disrupted while data was being sent.

Questions on wiping and Backup

I have a user who needs to wipe their BB. I want them to use Desktop Manager to backup everything.
Will the it backup even photos they have on the unit?

Yes...BES changes everything...the timing of things becomes more critical so that you don't accidentally wipe out things in the Messages database, especially if the user has any BIS email accounts configured... Let me remember how I used to do it with BES...it is important that device radios (both carrier and WiFi) remain OFF between steps 1 and 7:
Turn off all device radios
Backup (local to BB) BBM Contacts (not relevant if you restrict use of BBM via IT Policy)
Backup with Desktop Software -- full
Mass Storage Mode copy of Media Card and Device Memory
WIPE
Restore from Desktop Software -- SELECTIVE...only perhaps the configuration-type databases, but for sure NOTHING that BES will populate (contacts, calendar, etc.). If the user has BIS email accounts, then include the Messages database. Depending on what the reason for this drastic action is, you may indeed want to not restore anything...just in case something that you restore is the cause of whatever the problem was.
Turn on device radios and reactivate (as necessary) on carrier network
Reactivate with BES -- wait until this is 100% complete before proceeding (use WiFi if you can...it will be much faster).
Validate that all things are OK -- BES could have had copies of even configuration items...if so, it will have overwritten what was restored in 6 above...but that should be OK as they should have been accurate as of the last time BES mirrored those databases from the BB
If relevant, restore the BBM contacts from the file created in step 2...restore it from the PC (as copied in step 4) if necessary.
It's tricky...you want to do the restore before you allow BES to reactivate, especially if there are BIS email messages that you want to repopulate to the BB. If you allow BES to reactivate first, and then restore the Messages Database, it will replace any BES emails that came in between the two actions. Hence, the importance of keeping the device radios off (so that BES cannot reach out and auto-reactivate before you are ready).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I generate a real-time highchart from my database data?

I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database.
Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very similar to the
HighChart Demo which provides a real-time highchart with randomly generated values. It is also similar by X-axis and Y-axis, for I want my x-axis to be "Time" (I have a DateTime column in my database) and y-axis to be an integer (I have
a variable for that as well in my database).
Please I need help in sending the model data to my razor view.
Note that I am already using SignalR to display a realtime table. I also want to know if it can be used to automatically update the highchart as well.
Below is the code snippet of my script in the view. I have used the code provided in
HighChart Demo link for generating the highchart. Please tell me where should I apply the changes on my code.
@section Scripts{
<script src="~/Scripts/jquery.signalR-2.2.0.js"></script>

<script src="~/SignalR/Hubs"></script>
<script type="text/javascript">
$(document).ready(function () {
// Declare a proxy to reference the hub.
var notifications = $.connection.dataHub;
//debugger;
// Create a function that the hub can call to broadcast messages.
notifications.client.updateMessages = function () {
getAllMessages()
// Start the connection.
$.connection.hub.start().done(function () {
alert("connection started")
getAllMessages();
}).fail(function (e) {
alert(e);
//Highchart
Highcharts.setOptions({
global: {
useUTC: false
//Fill chart
$('#container').highcharts({
chart: {
type: 'spline',
animation: Highcharts.svg, // don't animate in old IE
marginRight: 10,
events: {
load: function () {
// set up the updating of the chart each second
var series = this.series[0];
setInterval(function () {
var x = (new Date()).getTime(), // current time
y = Math.random();
series.addPoint([x, y], true, true);
}, 1000);//300000
title: {
text: 'Live random data'
xAxis: {
type: 'datetime',
tickPixelInterval: 150
yAxis: {
title: {
text: 'Value'
plotLines: [{
value: 0,
width: 1,
color: '#808080'
tooltip: {
formatter: function () {
return '<b>' + this.series.name + '</b><br/>' +
Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', this.x) + '<br/>' +
Highcharts.numberFormat(this.y, 2);
legend: {
enabled: false
exporting: {
enabled: false
series: [{
name: 'Random data',
data: (function () {
// generate an array of random data
var data = [],
time = (new Date()).getTime(),
i;
for (i = -19; i <= 0; i += 1) {
data.push({
x: time + i * 1000,
y: Math.random()
return data;
function getAllMessages() {
var tbl = $('#messagesTable');
var data = @Html.Raw(JsonConvert.SerializeObject(this.Model))
$.ajax({
url: '/nurse/GetMessages',
data: {
id: data.id,
contentType: 'application/html ; charset:utf-8',
type: 'GET',
dataType: 'html'
}).success(function (result) {
tbl.empty().append(result);
$("#g_table").dataTable();
}).error(function (e) {
alert(e);
</script>

Hi Sihem,
Thank you for contacting National Instruments. Using the LabVIEW Real-Time module, you can do development without actually having a target. While viewing the project explorer window, you can do the following steps:
Right click on the project
Select New >> Targets and Devices
Select the "New Target or Device" radio button
Select the target you would like to develop on.Information about the LabVIEW Real-Time Module can be found here.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

Another problem with 8520 Curve

I try to download something from BB App World with the computer and the device connected on usb cable but its saying this "Device Radio Off , BB App World requiers that your device radio is turned on to continue" , what i must do?
Solved!
Go to Solution.

To turn the Radio ON, go to Network and Connections, then choose Mobile Network and make sure the Device Data is ON and you have a GPRS/EDGE as network indicator on Homescreen.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Device radio

Similar Messages

Maybe you are looking for