Dflt report in 6i and 10g

Hi
I am trying to get a tillslip to print correctly after converting from reports 6i to 10g. The problem i think is that the outputfile generated in the 6i version is diffrent from the output file in 10g. The 10g version looks similar to postscript while the 6i output file does not mean anything to me.
If i open the 6i test.dflt file it looks something like: =c0c1c32R
If i open the 10g test.dflt file it looks something like:
%!PS-Adobe-3.0 %
%Creator: Oracle Toolkit 2 for Motif 10.1.2.0.2 PRODUCTION
Using the 6i output file i can print the tillslip correctly in both the 6i and 10g environments. Using the 10g output file all the char in the output file prints including the comments (the %!PS-Adobe-3.0 % bit also)
Any ideas how to get the output file the same. All report settings (DESFOTMAT, DESTYPE, ...) are the same. The dflt.prt file only differs as follows:
printer "dflt"
height 66
width 80
after page control(L)
return        ""  (this line in 6i file is: return        "M" )
linefeed control(J)
Any ideas will be helpfull. I have tried creating the report as a .rtf, .pdf and .ps file and all of them print with the code inside and not just the tillslip info.
Thanks

Hi
I afound that the problem is that the app server does not know about the printer as it is connected to a users PC. Thus when using the dflt desformat it selects the default printer language of the App Server printer. This is the reason why the files are diffrent.
If I understand everything the process should be:
1 - Run the report from forms (on app server).
2 - Write the report to a file on App Server and then transfer the file to the user PC.
3 - Send file correct printer on the user PC.
The problem still remains on how to create the correct file which can be send to the printer connected to the users PC as the driver of the correct printer is not known too the App Server. The printer still prints the file incorrectly as the file is not created using its drive as what the case was when running it in 6i.
Setting the MODE to character (which will enable you to provide a .prt file if you had one to give) will not work as the report contains an image.
Regards
Edited by: hfp843 on Sep 17, 2008 2:28 AM

Similar Messages

  • Sorting in 6i and 10g reports

    Hello All,
    I am running 6i and 10g reports against a 10g database.
    I ran one of the 6i report and it generated a report in one sorting ordear
    and when i ran the same report on 10g ,it generated the report in ddifferent order.
    Both the reports r run against the same 10g database.
    The order by clause on the columns of the records r identical.
    Now i wanted to understand how it is sorting in different orders in both 6i and 10g reports?
    Thanks,
    Ranz

    Hi,
    Please note the fact that 6i Reports is not certified to work with 10g Database. Hence it becomes impossible to address the sorting behavior of 6i Reports, though there is nothing different in the way it works. I would suggest you to use 10gR2 version of Reports services with 10g Database which is certified and supported. Thanks for your understanding.
    Regards,
    Anand

  • Report server 6i and Report services 10g

    what is the extra features in Report Services 10g which are not available in Report server 6i.
    why would we use AS report services 10g rather then report server 6i,and our only requirment is to run oracle report on web which can fulfill with the help of reports server 6i.

    There is a long list of new features and I cant put all of them here
    You can see docs below
    For running on Web 9i, 10g moves to Servlet based architecture (though old cgi mode is available for backward compatibility). Reports behaves as a component in IAS and can be monitored and managed through Oracle Enterprise Manager (OEM).
    More details here
    http://www.oracle.com/technology/products/reports/index.html
    and here is the 10g datasheet
    http://www.oracle.com/technology/products/reports/10g/DATASHEET.HTM
    [    All Docs for all versions    ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    ---------------------------------------------------------------------------------

  • How to check report server name and how to start report server in 10g ?

    Hello Experts,
    I do have 10g Dev suite installed on my machine
    I want to run my report on web using OC4J
    How can i check the report server name as well how can i start the report server if is not running ?
    As well,
    Want to know in real time how it works in case there is application server installed 
    Thanks in advance,
    SShubhangi

    Hi Tony
    Sorry for the confusion as I m new to reports
    I do have 10g Dev suite installed/Report builder on my local machine
    I want to run my report on web using OC4J on the same local machine instead of the Run paper layout and Run web layout option
    Means i want to run the report by passing URL like below
    http://hostname:port/reports/rwservlet?report=report_name server=server_name+userid=db_connect_string+destype=file
    +desformat=spreadsheet+desname=C:\temp\myexcel_output.htm
    How can i check the report server name as well how can i start the report server if is not running ?
    Hope this is clear now
    Thanks...

  • Crystal Report 2008 SP3 and BO XI 3.1 conflict

    Hi every body,
    We have a BOE system:
    BO XI 3.1
    Oracle db 10g
    All running successful and can create some types of WebI report.
    But we also want reports with Crystal Report.
    1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
    2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
    3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
    We set rights for Oracle DB user again. But still error: cannot fetching.
    4> We searched the solution for this problem on the internet. But not worked, no answer.
    Can somebody help me bring back the BOE system state again ? pls   :"<
    T______T

    Hi Paul,
    I hope I read your question right!
    Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
    Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
    Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
    Regards
    Rim Geurts

  • Migrate reports from 6i to 10g

    Hello friends,
    I want to migrate reports created in oracle 6i report builder
    to
    oracle 10g.
    Please give me steps for that.
    Arvind2

    It happens on all machine. We use browser to launch the application and the report is called from forms (10.1.2). We didn't change any code in report and neither the fonts (Tahoma). In 6i, client server environment, windows can find the font. I guess in 10g web environment, the font is not as default. HP Laserjet 8000N is a network printer which I use to testing my report. everything is fine in 6i but not 10g. Here is my question.
    1. How to check printer setup? Should I use the default font from Linux instead of Tahoma?
    2. I found a note in metalink, Note:356221.1 which explains the procedures to deploy reports from windows to Linux. I am not sure my problem is related to the font or something else...
    Thanks for you reponse.

  • Calling shared objects in unix from Forms 6i and 10g

    I would like to know how to call shared objects in unix from Froms 6i and 10g. Can anybody help in this regard? Your help is very well appreciated.

    Hi,
    Do you have any 11i instance where those custom forms are used? If yes, you will have to copy those forms from 11i to R12 instance, open the forms using Forms 10g builder, compile it and upload it back to the server.
    Note: 427879.1 - How To Customize And Compile An Application Seeded Form (FMB) Or Library (PLL)?
    Note: 743490.1 - Customization in Oracle Applications
    Note: 563258.1 - How To Upgrade 11i Custom Forms And Reports To R12
    Regards,
    Hussein

  • Urgent: Calling Reports from Oracle Forms 10g (10.1.2.0.2) fails

    Problem displaying a report from within Oracle 10g forms.
    After a lot of work, we are able to access and actually display a report directly from Internet explorer and view the report from the report server as well.
    The successful url was:
    http://york.vrc.virginia.gov:7778/reports/rwservlet
    ?report=/u01/app/oracle/produ ct/vrcmidtier/reports/vrc/pmw41051.rdf
    &userid=vrcpr/[email protected]&destype=cache&desformat=HTML
    The form displays correctly back to the screen
    When executing from within the form, however, the report runs but does not display back to the screen.
    Forms Steps so far:
    created a report object called pmw41050
    static parameters are:
    file name: /u01/app/oracle/product/vrcmidtier/reports/vrc/pmw41051.rdfination format
    execution mode: batch
    communication mode: synchronous
    destination name; null
    destination format: HTML
    reportserver:: vrc_york_midtier
    Built a when button pressed trigger as follows:
    declare
    l_report_file varchar2(200);
    l_report_id REPORT_OBJECT;
    l_report_status varchar2(200);
    begin
    -- capture the report
    l_report_file := 'pmw41051';
    l_report_id := find_report_object(l_report_file);
    -- set the parameters for this output
    set_report_object_property(l_report_id, REPORT_EXECUTION_MODE, BATCH);
    set_report_object_property(l_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
    set_report_object_property(l_report_id, REPORT_DESTYPE, CACHE);
    set_report_object_property(l_report_id, REPORT_DESFORMAT, 'PDF');
    set_report_object_property(l_report_id, REPORT_SERVER, 'rep_york_vrcmidtier');
    set_report_object_property(l_report_id, REPORT_OTHER, 'PARAMFORM=NO');
    set_report_object_property(l_report_id, REPORT_DESNAME, 'DESNAME');
    -- and run the report
    l_report_status := run_report_object(l_report_id);
    -- monitor progress
    while l_report_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
    l_report_status := report_object_status(l_report_status);
    end loop;
    message('back from the report'); -- test message for return
    end;
    The report executes without error (as indicated by the message on the last line) but does NOT display back to the screen
    checking the rwservlet/showjobs verifies the report completed and the reportcan be displayed from there.
    So, bottom line: how to make a 10g form call report and display it on the screen?

    Thanks MIke for your feedback...
    Will this surfice?
    Procedure Test_Report Is
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(50);
    BEGIN
    repid := find_report_object('report5');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    IF rep_status = 'FINISHED' THEN
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
    substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
    ELSE
    message('Error when running report');
    END IF;
    END;

  • URGENT!!! calling crystal reports from oracle forms 10g

    Is it possible to call crystal reports from oracle forms 10g?
    Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
    Please provide codes with details showing step by step.
    Thanks

    hi
    try something like this.
    DECLARE
    charWinHandle VARCHAR2(50);
    numWinHandle NUMBER;
    BEGIN Set_Application_Property(Cursor_Style,'BUSY');
    charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
    numWinHandle := To_Number(charWinHandle);
    :Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
    := numWinHandle;
    :Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
    :Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
    := 'DSN=;UID=' || Get_Application_Property(UserName) ||
    ';pwd=' || Get_Application_Property(password) || ';dsq=;';
    Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
    'C:\Sample_Rep.Rpt' );
    Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
    Set_Window_Property( 'MAIN', Window_State, Maximize );
    :reptitle := 'Report Preview Window';
    numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
    Set_Application_Property(Cursor_Style,'DEFAULT');
    END;NOTE: Change the report name and path according to your required file name and path in
    the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
    assumes that you will use the current USER and PASSWORD for the Form.
    - To make the above Form generic so that you can run any Crystal report from it, then create
    a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
    Then just replace the file name with the passed parameter.
    -. Run the Form
    If its correct/helpful please mark it thanks.
    sarah
    Edited by: [email protected]@h on Nov 27, 2009 6:33 AM

  • Calling Crystal Reports from Oracle Forms 10G

    Hi everyone,
    I am trying to call a crystal report from Oracle Forms 10G.
    I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
    Can someone please send me the code to do this and also the exact steps that are to be followed.
    Thanks
    Fm.

    Hi Andreas,
    I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
    I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
    Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
    Is that possible ? If yes please let me know the steps to do this.
    Thanks
    Faiz
    Edited by: IQ on May 13, 2011 11:38 AM

  • How to call Reports in oracle forms 10g

    Dear All,
    How to call Reports in oracle forms 10g.
    I am using Oracle Forms 10g Reports 10g and Database 10 and and Operating system Windows XP.
    Please give me the Solution.
    Thanks and Regards,
    Faziludeen

    Hi Omkar,
    Please check the following code.
    DECLARE
      repid REPORT_OBJECT;
      v_rep VARCHAR2(100);
      rep_status VARCHAR2(20);
      plid ParamList;
    BEGIN
      plid := Get_parameter_List('tmp');
      IF NOT Id_Null(plid) THEN
      Destroy_parameter_List( plid );
      END IF;
      plid := Create_parameter_List('tmp');
      add_parameter(plid,'p_parameter',text_parameter,to_char(:POLICY.POLICY_NO));
      Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
      repid := FIND_REPORT_OBJECT('POL_REP');
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
      SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
      v_rep := RUN_REPORT_OBJECT(repid,plid);
      rep_status := REPORT_OBJECT_STATUS(v_rep);
      WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
      LOOP
      rep_status := report_object_status(v_rep);
      END LOOP;
      WEB.SHOW_DOCUMENT('http://'||'LENOVO-428E9E41'||'8889'||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
      '||'server=prod_report_server&P_parameter='||:POLICY.POLICY_NO||
      '&paramform=no');
    END;
    I am used to Start the Report sever   'Rwserver Server=prod_Report_Server Start'
    OracleAS Report Services
    Version :-   10.1.2.0.2
    Name    :-   prod_report_server
    Status  :-   Server is Shutting down
    Jobs in Queue  0
    Active Engines  0
    I got the Following Error when I trying to run the Report
    FRM-41211: Integration error:SSL failure running another product
    Thanks and Regards,
    Faziludeen

  • SQL performance 9i and 10g

    Hi guys,
    I have question regarding sql fetching slow response issue in 10g compared to 9i. Have enabled the 10046 trace the actual CPU and Elapsed time of that query.
    cpu = cpu time in seconds executing
    elapsed = elapsed time in seconds executing
    rows = number of rows processed by the fetch or execute call
    SQL == Running on 9i
    call count cpu elapsed disk query current rows
    Parse 1 0.01 0.01 0 0 0 0
    Execute 1 0.00 0.00 0 0 0 0
    Fetch 13295 1.39 1.55 513 14742 0 13294
    total 13297 1.40 1.56 513 14742 0 13294
    SQL == Running on 10g
    call count cpu elapsed disk query current rows
    Parse 1 0.01 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 0 0 0
    Fetch 13305 1.41 1.32 0 14621 0 13304
    total 13307 1.42 1.32 0 14621 0 13304
    They are running quite fast in 9i and 10g Database with the trace report. However, there has slow response issue on 10g.
    E.g SQL> set time on
    SQL> set timing on
    ---- fetching records on screen
    ---- truncated
    13304 returned.
    00:15:21
    SQL>
    In 9i, it only takes 2 mins to return the sqlplus prompt, but take at least 15 mins to return in 10g. Do you have any idea?
    I have raised the issue with Oracle Support, the the OSS said.. your 10046 trace is good and take only 1-2 sec. And he didn't follow after that. Please help if you have idea. Thanks
    Best Regards,
    Vbeer.

    Hi Charles,
    Oracle Version 10.2.0.3
    NAME TYPE VALUE
    statistics_level string TYPICAL
    NAME TYPE VALUE
    optimizer_dynamic_sampling integer 2
    In 10g raw trace file of 10046:
    <--QUERY-->
    END OF STMT
    PARSE #1:c=10000,e=4193,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=21234109349008
    BINDS #1:
    EXEC #1:c=0,e=115,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=21234109349329
    WAIT #1: nam='SQL*Net message to client' ela= 3 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109349392
    WAIT #1: nam='SQL*Net message from client' ela= 669 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109350166
    WAIT #1: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109350353
    WAIT #1: nam='SQL*Net more data to client' ela= 12 driver id=1650815232 #bytes=2161 p3=0 obj#=77206 tim=21234109350403
    FETCH #1:c=0,e=224,p=0,cr=4,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109350428
    WAIT #1: nam='SQL*Net message from client' ela= 149 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109350613
    WAIT #1: nam='SQL*Net more data from client' ela= 9 driver id=1650815232 #bytes=524 p3=0 obj#=77206 tim=21234109350665
    WAIT #0: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109350737
    WAIT #0: nam='SQL*Net more data to client' ela= 9 driver id=1650815232 #bytes=2524 p3=0 obj#=77206 tim=21234109350774
    WAIT #0: nam='SQL*Net message from client' ela= 5199 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109355996
    WAIT #1: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109356058
    FETCH #1:c=0,e=48,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109356084
    WAIT #1: nam='SQL*Net message from client' ela= 61 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109356177
    WAIT #0: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109356218
    WAIT #0: nam='SQL*Net message from client' ela= 4931 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109361179
    WAIT #1: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109361248
    FETCH #1:c=0,e=43,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109361272
    WAIT #1: nam='SQL*Net message from client' ela= 81 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109361388
    WAIT #0: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109361447
    WAIT #0: nam='SQL*Net message from client' ela= 5057 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109366540
    WAIT #1: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109366602
    FETCH #1:c=0,e=52,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109366629
    WAIT #1: nam='SQL*Net message from client' ela= 75 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109366737
    WAIT #0: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109366778
    WAIT #0: nam='SQL*Net message from client' ela= 4913 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109371739
    WAIT #1: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109371791
    FETCH #1:c=0,e=42,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109371815
    WAIT #1: nam='SQL*Net message from client' ela= 64 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109371911
    WAIT #0: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109371947
    WAIT #0: nam='SQL*Net message from client' ela= 95474 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109467455
    WAIT #1: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109467536
    FETCH #1:c=0,e=58,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109467563
    WAIT #1: nam='SQL*Net message from client' ela= 248 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109467848
    WAIT #0: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109467893
    WAIT #0: nam='SQL*Net message from client' ela= 5526 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109473480
    WAIT #1: nam='SQL*Net message to client' ela= 3 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109473716
    FETCH #1:c=0,e=143,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109473761
    WAIT #1: nam='SQL*Net message from client' ela= 148 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109473979
    WAIT #0: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109474068
    WAIT #0: nam='SQL*Net message from client' ela= 5516 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109479623
    WAIT #1: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109479745
    FETCH #1:c=0,e=84,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109479781
    WAIT #1: nam='SQL*Net message from client' ela= 126 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109479950
    WAIT #0: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109479996
    WAIT #0: nam='SQL*Net message from client' ela= 182929 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109662981
    WAIT #1: nam='SQL*Net message to client' ela= 2 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109663141
    FETCH #1:c=0,e=100,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109663177
    WAIT #1: nam='SQL*Net message from client' ela= 139 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109663368
    WAIT #0: nam='SQL*Net message to client' ela= 0 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109663434
    WAIT #0: nam='SQL*Net message from client' ela= 5593 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109669069
    WAIT #1: nam='SQL*Net message to client' ela= 2 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109669240
    FETCH #1:c=0,e=110,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109669282
    WAIT #1: nam='SQL*Net message from client' ela= 167 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109669506
    WAIT #0: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109669597
    WAIT #0: nam='SQL*Net message from client' ela= 5505 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109675138
    WAIT #1: nam='SQL*Net message to client' ela= 1 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109675213
    FETCH #1:c=0,e=56,p=0,cr=1,cu=0,mis=0,r=1,dep=0,og=1,tim=21234109675239
    WAIT #1: nam='SQL*Net message from client' ela= 76 driver id=1650815232 #bytes=1 p3=0 obj#=77206 tim=21234109675351
    Cheers,
    Vbeer

  • Registering Report Writer in Portal 10g

    Portal 10g AS software is fairly new and not a lot of books are available for it.
    I am looking for a guide or proper steps to registering the Oracle Report Server with Portal 10g.
    I have looked at this doc: http://download-uk.oracle.com/docs/html/B14048_01/pbr_portal.htm#i1007990
    and the value for "Oracle Reports Web Gateway URL for RDF reports" provided in the doc does not seem to work. Thanks for assistance.

    Or the portal forum at:
    Oracle Application Server Portal
    Regards,
    Kavitha

  • How to get report Server Name and Environment ID in Report

    How to print report Server Name and Environment ID in Report 10G.(Through in package or others)
    I'm also using Oracle Application Server 10G.

    Hi,
    Server and envid are the parameters passed along with Reports URL call.
    These variables value can be traped in Report by defining SERVER , ENVID named user parameters.
    Once trapped, can be printed on Report.
    Just ensure that these users parameters are not exposed to Parameter page, otherwise user may end up changing it.
    Thanks

  • Custom Reports Server Issue (upgrading 10g to Weblogic 11g)

    I am having an issue with "Anonymous' user showing up when I go into the console of the Weblogic server to see all the report requests. In 10g (which we are upgrading from), I have report requests that I do a Preview from within Oracle Forms. When I do the RUN_REPORT_OBJECT/SHOW.WEB_DOCUMENT, it captures the User account and put it in the console with that username. On 11.1.1.4, using same form/report, it doesn't capture the username. If I call the reports server from the database, it does work fine.
    Anyone have any ideas if there's something I have to do in Oracle Forms to put that username in or if it's a setting on the Custom Reports Server that i need to set so that it captures the name from the Oracle Forms session.

    Hi A. Drieux,
    Thanks for the reply. i have some questions on ODI.
    Now we are using hyperion 11.1.1.3 with ODI 10.1.3. We are upgrading hyperion version 11.1.1.3 to 11.1.2.2.
    Is it possible, to use the same ODI 10.1.3 version to upgrade version(hyperion 11.1.2.2) also?
    Reply would be appreciated.
    Thanks,
    mady

Maybe you are looking for

  • Order of data in DTP

    Hi All Can you clear up my confusion please. I am transferring data from one DSO to another DSO in an attempt to perform a merge. The records in DSO1 have been modelled incorrectly so one logocal record can appear as 2 physical records. These get mer

  • Alphabetical sorting problem

    I have an application which has a drop down loaded with some names. These names are loaded from database which are already sorted alphabetically. But if I test it in IE9, the drop down is not sorted where as it's sorted in other browsers like chrome

  • Error code: U44M1I210

    Trying to install 12.1 update patch in Windows 8 64bit for Photoshop Elements and stuck on this error.   Tried complete uninstall, reinstall and same problem.

  • Korean Character printing

    Hello, Iam face with an issue of printing Korean characters. It's a must that I should use the following criterion. Host spool access method  : L print locally using LP/LPR in the output device configuration. I searched the oss notes and found out a

  • ILife '08. Reinstalling but it requires os 10.4.8

    Using iLife '08.pkg to reinstall but blocked by a dialog that tells me "Registrtion cannot be installed on this computer. This softwre requires Mac OS X version 10.4.9". But this computer was running 10.4.10 when iLife '08 was originaly installed. Sh