DHCP does not load as a service from the Server Admin

Dear friends,
I have faced the following problem.
The task is to do internet sharing among other services on mac mini server.
Started with the clean install of OS X Lion, upgraded it to Server and then installed all updates.
USB Ethernet (en2) is looking into ISP with static IP, Ethernet (en0) is LAN.
Since I need specific address scope for the LAN I have actived DHCP from the Server admin and configured it to provide
192.168.8.11 to 192.168.8.200 as an adress scope, mask 255.255.0.0 on the interface en0.
Everything was working just fine for a couple of minutes and the LAN clients got their IP addresses from the DHCP scope. In a very short time Server Admin popped up and error message:
Try to refresh the view (aserver.local./Server). (kReceivedUnknownError)
Niether grey nor green bubble apears near the DHCP on the service list.
I keep recieving this error for all other services until I manage to disable dhcp on the services tab of server settings. After all I cant make it run again. I tried to restart dhcp from the terminal but it does not help. "sudo serveradmin fullstatus dhcp shows nothing".
Do you have any ideas how to make it work?

So you're not using NAT between the two? Even though you're using 255.255.0.0 so both network can talk (basically you have a class B network setup using Class C ip addresses), your network masks for each should be something like 255.255.255.xxx depending on how many subnets you need. NAT or Network Address Translation should be running and that will provide the interconnectivity between the two.
Your DHCP server should be set up only with 255.255.255.0 for the DHCP service since you are only serving IP addresses to the one subnet 192.168.8.x. Your starting address in DHCP setup is 192.168.8.11 ending address 192.168.8.200 and the netmask should be 255.255.255.0.

Similar Messages

Firefox 3.6 does not open onto my desktop from the dock when links in email or other files are opened. I have eMac with system 10.4.11 in English

Firefox 3.6 does not open onto my desktop from the dock when links in email or other files are opened, use to. I have eMac with system 10.4.11 in English
Thanks, Claude Combs
[email protected]

Firefox 3.6 does not open onto my desktop from the dock when links in email or other files are opened, use to. I have eMac with system 10.4.11 in English
Thanks, Claude Combs
[email protected]

Application does not load correctly when deploying to standalone server

All,
I have created simple application implementing fusion theme. Applicaiton works fine when I run on integrated server but when deployed on standalone server it does not load any images or the theme itself. afrloop keep incrementing in status bar and ends up with java script error while later.
I deployed another test application on standalone server and that works fine i.e. theme gets loaded correctly. Also, how should I include images on the page? I have a images folder in web content folder but they dont get loaded.
Any help will be appreciated.
Thanks,
Dipal

LabVIEW now uses the Microsoft installer. It's possible that you need to upgrade the version that's on the Win2K box. I think the latest service packs from Microsoft include it.

I use Windows XP. The problem now is that on two consecutive occasions when I open iTunes it either says the library is corrupt and creates a new one or will not load a previous one from the file. All my meta data and 2K songs are "missing".

Can I recreate my proper library with its 8700+ songs and a load of meta data from the iPod. Since two upgrades ago iTunes, for me, has become very unreliable.

Hi there caunsall!
I have an article for you that can help you re-create your iTunes library. That article can be found right here:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
That article will walk you through all the steps to take care of re-creating your library. Take care, and thanks for visiting the Apple Support Communities.
-Braden

Why does firefox delete my incoming mail from the server when I start my PC

I have XP-Service Pack 3. When I start my PC, all my incoming mail is deleted from the server "Ziggo" When I set Windows Internet Explorer as the default, the problem is solved. I used Firefox 5.0 as well as Thunderbird, I'm now using Outlook express and Windows Explorer. I suspect that on Start-up, either Thunderbird or Firefox makes contact with the "Ziggo" server and deletes the mail. Ziggo, my ISP, cannot help me.

You don't have anything under Advanced between the Move Discarded Messages Into section and the S/MIME section?!
I have 2 sections in between:
Deleted Messages> Remove > how long before deleted messages are removed from the trash
and
Incoming Settings > ...
Sorry I do not know why you would not have those sections, especially the Deleted Messages section as this applies just to the Mail app and the Mail trash mailbox
the stock answer when puzzled is to suggest a Reset of your iPad:
hold both the Home button and the Power button down for 10+ seconds until the Apple logo appears. Let go promptly when you see the Apple logo. Wait another 30 seconds for your iPad to restart itself. No data will be lost.
see if that changes anything so that those sections reappear in your settings.
You could also try Settings > General > Reset > Reset All Settings ... I don't know enough about that to know if it will help, but it will mean you have to go back and fix all your settings afterward

Forms applet does not load when request forwarded from custom servlet

I have an existing forms app that I wish to call from a newly-developed servlet. The servlet determines which form to call and then forwards the request to the forms servlet using RequestDispatcher.forward().
The request is forwarded correctly but when it is done all I see is a blank browser (IE7) window. When I View Source I see all the correct HTML code (from basejpi.htm) but it seems my browser does not attempt to load the forms applet. No messages are displayed in the Java Console. This is the same HTML that comes back if I run the forms app directly, e.g. click a link that goes straight to the forms servlet URL, only in that case the forms app starts up fine.
Anyone know why this does not work?

Figured out what is going on:
In basejpi.htm there is "<SCRIPT LANGUAGE=JavaScript SRC=java/forms_ie.js>" that creates an OBJECT tag to load the forms applet. I believe since the context of my custom servlet is different than that of the forms servlet, forms_ie.js is not found when the request is forwarded from my servlet.
One question answered raises another. There is also an OBJECT tag inside a NOSCRIPT tag for machines where scripting has been disabled:

<NOSCRIPT>
<OBJECT name=FormsApplet
type="application/x-java-applet"
...>
</NOSCRIPT>
<SCRIPT LANGUAGE="JavaScript" SRC="java/forms_ie.js"></SCRIPT>
My thinking is to remove the NOSCRIPT tag, and also the SCRIPT tag mentioned above, so all machines will simply see the OBJECT tag, like so:

<OBJECT name=FormsApplet
type="application/x-java-applet"
...>
This makes me wonder why the SCRIPT option is there to begin with. Anyone see a downside to this approach?
Kevin

Elements 12 does not load my raw files from my D610

Raw files not loaded from my D610 into Elements 12

Editor>help>updates to update camera raw to 8.3.

Wlst command listWebServices() does not show all web services in the domain

Hi, I am trying to use wlst command listWebServices() to display all web services of a domain. It seems that it only displays the web services of enterprice applications (ear apps), but it does not show the web services of web applications (war apps). If I pass ear appliication name and one of its web module to listWebServices, it will show the web services that belong to the web module of this application. However if I pass war application name and its web module name to listWebServices, it will return "Unable to find the SOA Composite or Service. Oracle UCM Native Web Services", although I can see from wls admin console or em that this web application does have a couple of web services.
I also tried to call listWebServicePolicies, again it returned "Unable to find any Web Services with the specified Application".
My purpose of doing above is to use wlst to detach/attach web service policies for some web services. Since I cannot find the web services, I off course cannot detach/attach policies.
Does anyone have any clue how to find web services using wlst command that belong to a war application, and then detach/attach policies ? Any help will be greatly appreciated.
Thanks,
Jian Huang
From Oracle fusion HCM

As of UCM version 11.1.1.6, Oracle UCM Web Services are managed from Enterprise Manager in Fusion Middleware Control, not Weblogic Admin Console!
A document at Oracle support explains this in more detail: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1456506.1 :
Setting up GenericSoapService in WLS to use WS-Security:
Go to FMW Enterprise Manager. http://wlshost:7001/em
In the tree, navigate to Weblogic Domain -> <Domain Name> -> and click on UCM_server1. (If the managed server for WCC is named something other than UCM_server1, click on that name.)
From the UCM_server1 drop down menu, select "Web Services".
On the "Oracle Infrastructure Web Services" tab, click the GenericSoapPort link.
Once there you can set the policies you want and restart the server!
Regards,
Göran
Edited by: Göran Paues on 2012-aug-20 10:02

When clicking on a lookup, firefor does not allow me to select from the list

When I use firefox, the website I am on has lookup fields located on it, firefox does not allow me to select my preferred option from the list. also when I slect another lookup from a list it displays the message 'invalid lookup value located in field ......'
This does not happen in IE

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Photosmart C4180 does not pick up 10x15 photopaper from the photo paper cassette

What can I do to get the printer to pick up 10x15 photo paper from the photo paper cassette? It wil only print when feeding one piece of photo paper at a time. This is tedious and annoying. No problems with ordinary paper.

Hello Mr. Wilks,
I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
I really hope this helps you, feel free to respond if there is anything else I can help with!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Iphone iOS 8.1 not loading or updating applications from the app store

HI all,
seems that since I updated my iPhone 6plus to iOS 8.1 app store updates are not working. I just get the "circle" with the square in the middle and it just sits there. doesn't matter if it is through wifi or cellular.

I found some other comments which alluded to removing all items in my "newsstand". I did that, rebooted and now application updates are working again. Of course, this isn't a long term solution as I do want my newsstand magazines back. When are we getting a fix?

My imovie does not respond to my command from the drop down menu to import movies. What should I do?

I tried to import movies to my imovie, but when I select that option, nothing happens. I asked it to check for updates and it says that one is available, but when it sends me to the system updater thing, that thing tells me that I don't have any updates available at this time. ***?
Thanks

The movie you are trying to import may not be compatible with iMovie, open the movie in Quicktime and check it's properties in the movie inspector.

Itunes does not download all purchased songs from the Itunes Store

A few weeks ago, I purchased the latest CD of Lionel Richie from the Itunes Store, but only 4 songs were downloaded. Now every time I try to download the rest CD by either checking for purchases in the Itunes menu or trying to buy the CD again, it tells me the Itunes Store is temporarily unavailable...
Anyone knows how to solve this??

I had a similar problem with a Jimmy Buffett album,I sent the iTunes store an e-mail described the problem including the album title and receipt number and within 24 hours they responded and had done a "reset" and problem solved.
Give it a try

I have to re-install adobe flash for firefox every time i start my computer even if firefox shows that my adobe flash is working it does not.I also get notices from the websites i visit (get flash e.t.c.)

i have the latest firefox 10.02 in win7 and even if firefox shows is installed my adobe flash is not working so i have to run the flash installer every time i start my pc.After this everything works fine until the next start when i have to run the flashinstaller again

There are two versions of the Flash Player plugin. One is ActiveX and only works in IE. It sounds like you have that one installed. The other one works in all other browsers.
What seems to be happening is that you have security software that's blocking one of those versions of Flash/restoring your computer state and so it gets uninstalled when you start your computer. The other possibility is that there are permission issues. Unfortunately, this isn't something that Firefox can control; it's a problem with the Flash installation (Firefox is dumb and just looks in the registry for a list of installed plugins to load).
Make sure that you're an admin on your computer when you try to install Flash and that you check your security settings. If that doesn't work, try posting to the [http://forums.adobe.com/community/flashplayer Adobe community forums] to see if other people have had similar issues and know how to address them.

Adminserver does not start after deleting oim_server1 from the console

Have deleted oim_server1 from weblogic console and. I wanted to reconfig oim but can't extend the domain anymore as OIM is greyed out.
Please help:
Can't start Adminserver anymore too:
WARNING: Error registering the bulk operations MBean.
java.lang.IllegalArgumentException: WorkManagerMBean 'OIMUIWorkManager' refers to a constraint or request class 'MaxThreadsConstraint-0' but they are deployed on targets that have no servers in common. Please deploy the mbeans so that they have at least one server in common.
at weblogic.management.configuration.WorkManagerLegalHelper.validateTargets(WorkManagerLegalHelper.java:66)
at weblogic.management.configuration.WorkManagerMBeanImpl.setMaxThreadsConstraint(WorkManagerMBeanImpl.java:487)
at weblogic.management.configuration.WorkManagerMBeanImpl$9.resolveReference(WorkManagerMBeanImpl.java:468)
at weblogic.descriptor.internal.ReferenceManager$UnresolvedReference.resolve(ReferenceManager.java:404)
at weblogic.descriptor.internal.ReferenceManager.resolveReferences(ReferenceManager.java:296)
at weblogic.descriptor.internal.DescriptorImpl.resolveReferences(DescriptorImpl.java:328)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:334)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(Edi
THANKS!

Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

DHCP does not load as a service from the Server Admin

Similar Messages

Maybe you are looking for