DHCP issue with mobility anchor
Hi Guys,
I am having a bit of trouble to get the DHCP to work in my configuration. basically I have configured one SSID on two WLCs (running same version of code), I configured WLC 1 as anchor controller and configured itself as mobility anchor (local), and on foreign controller (WLC2), I have configured the anchor as a mobility anchor. I have added both of the WLCs in each other's mobility list, however WLC1 and 2 are not in the same mobility group. clients are getting IP address through an external DHCP server.
the problem is that when I used the management interface for the WLAN, I could get IP address through DHCP without any problem, however if I use another dynamic interface created for the SSID, then I could not get IP address anymore. I did another test with two WLCs configured in the same mobility group, then everythnig works fine. I have double checked my configuration for the dynamic interface but could not find anything wrong.
so my question is
is it possible to do auto anchoring configuration with two WLCs in different mobility group (different mobility group name), since based on my test management interface works, but another dynamic interface did not work. in the configuration guide, it says: "you must add controllers to the mobility group member list before you can designate them as mobiolity anchors for a WLAN", does that mean the mobility group name has to be the same for both of the WLCs? if that's the case why does management interface worked?
thanks in advance for you help.
Hi Nicolas,
thanks for your reply, i guess that's where the problem is - I could not ping the dynamic interface from the DHCP server. (eping and mping works fine)
however I could ping the dynamic interface of the foreign controller (i have created another dynamic interface on the same subnet on the foreign controller, i understand it's not really necessary since we getting IP in the range defined on the anchor controller). the only difference between the two controllers is that the foreign controller enabled LAG, and only connected to the core swithc number 1, but the anchor controlelr is not (it has two connections to two core switches respectively).
so does this mean I can not use this controller to be a anchor controller if it has two connections to two differnet switches? if yes is there any documentation on this point?
Thanks very much for your help.
Similar Messages
-
Issues with Mobile Broadband on the Tablet 2
Is anyone having slowing degrading connection issues with Vodafone and the Tablet 2. Upon fresh boot, signal is strong, then degrades until a reboot is required. Seems very odd. Other devices connecting to vodafone at the same location have no problems.
hi rogerf.
due to it was working before, i can say there's no compatible issue with the device and computer.
you may need to contact ericsson or the mobile provider in aussie. still, there may be users here who has/had the same issue. you can wait for reply. -
Recurring issue with mobile upload
Hi all,
Using Lightroom 5.6, I am experiencing ongoing issues with synchronising (uploading) LR to mobile devices. In brief, the upload will typically fail in mid-session with some collections partially or fully uploaded and some not started. (This may initially have been caused by going off-line during an upload), It will not recover. Deleting all uploaded data to prompt a restart does not help - it does not restart either.
Previously I have had to contact support and send the diagnostic report. Apparently there is a flag on the server end that needs resetting. Not the most satisfactory of solutions as it requires an action outwith the users control, but it does / did reset the file transfer interface. Apparently this bug was scheduled for fixing in the next up date. I understand I am on the latest (5.6) version , so does anyone know if this is still a bug?
Meantime, can support please reset my connection?
Regards .... AlastairHi Alastair,
I've contacted you privately.
Thanks,
Ignacio -
10.5 DHCP issues with Wireless - self assigned IPs?
We're having an issue with Mac OSX 10.5.4 clients, running the latest software updates, not getting an IP address via DHCP on our wireless network.
We're using Cisco APs, with multiple VLANs & SSIDs. They authenticate, but get automatic self-assigned IP addresses. None of our PC clients are experiencing this issue, nor older 10.4.x OSX clients. This looks like a bug, from what I was able to discover:
http://forums.macrumors.com/showthread.php?t=384947
Is Apple aware of this, and/or working on a fix? I've seen many issues over the last year or so with Airport clients and wireless connectivity..This is a "user to user" help forum that is designed as a self-help system, independent of Apple's Technical Support system. No one here can say what Apple knows or is doing about a specific issue (pure speculation is discouraged). We share experience and suggest possible solutions or workarounds.
One way to ensure that your issue is brought to Apple's attention is to use their feedback form for OSX - http://www.apple.com/feedback/macosx.html
Since the link you posted is from late last year, there have been many updates to Leopard. Some of the updates mention network reliability. Even though Apple has stated that the Pram chips don't control network connections, I have had some luck by Zapping The Pram - http://support.apple.com/kb/HT1379 - Remember to check your System Prefs for things like date/time settings after you Zap. -
Recent issues with mobile safari
What the heck is going on with mobile safari !?! Super slow on loading most anything, have to refresh the page to finish loading it and can't like or comment on facebook either
I think your problem is your network connection. Are you using cellular data or Wifi when you notice the slowness?
I suggest you reset your net work connections. -
Issues with mobility and autodiscovery with Lync 2013 and IIS/ARR
Hi all,
this is my last resort after days and days searching a solution for this problem... unsuccessfully.
All works fine unless the autodiscovery service with external users and the mobility service for both internal and external ones.
I deployed a Standard Edition Lync Server 2013 with:
a consolidated Frontend server in LAN
an Archiving and Monitoring server in LAN
an Edge server in DMZ with 2 NICs (one in DMZ network and one in LAN)
a IIS/ARR 2.5 reverse proxy in DMZ with 2 NICs (one in DMZ network and one in LAN)
All these roles are on Windows Server 2012 R2.
No split-DNS is deployed since I have different domains for internal and external. In any case I used the pinpoint DNS tip to resolve some records internally (I followed this guide http://tsoorad.blogspot.ch/2012/10/lync-server-dns-pinpoint-zones.html)
Here DNS records into internal domain:
A-record for meet.domain-ext.com points to Frontend server local IP
A-record for dialin.domain-ext.com points to Frontend server local IP
A-record for lyncdiscoverinternal.domain-ext.com points to Frontend server IP
A-record for lyncwebexternal.domain-ext.com points to Frontend sever local IP
A-record for autodiscover.domain-ext.com points to Exchange server local IP
Here DNS records into external domain:
CNAME-record for lyncdiscover.domain-ext.com points to lyncwebexternal.domain-ext.com
CNAME-record for sipexternal.domain-ext.com points to lyncwebexternal.domain-ext.com
A-record for meet.domain-ext.com points to Reverse Proxy public IP
A-record for dialin.domain-ext.com points to Reverse Proxy public IP
A-record for lyncwebexternal.domain-ext.com points to Reverse Proxy public IP
I installed and configured IIS/ARR 2.5 with KB2732764 and KB2785586 on Reverse Proxy following the NextHop guide. The local IP address of external NIC on Reverse Proxy is NATTED by a Cisco ASA firewall with public IP address and only 80/443
ports are permitted.
The problems occurs when I try to connect whit my Lync 2013 APP on iPad using autodiscovery service, both internally and externally. After some seconds the APP shows the message “Cannot connect to the server because it could be busy or
temporarily unavailable. Retry.” When I used the IIS/ARR 3.0 the problem looked like an authentication issue, then I came back to ISS/ARR 2.5 version with its KB. Now I cannot understand what is the cause about logfail.
The same behavior occurs with Android Lync 2013 APP and Windows Phone 8 APP.
Moreover my Lync 2013 client on Windows 7 can connect internally with autodiscovery settings but it cannot do it externally.
I'm a bit confused because I cannot understand if the problem is about external webservice of Frontend server or about Reverse Proxy configuration or about Lync Control Panel configuration.
Here is an extracted of iPad Lync 2013 log (sorry if it’s a bit long).
Any helps are very appreciated, thansk a lot!
</SentRequest>
2013-12-20
11:33:00.781 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = http://lyncdiscover.domain-ext.com/, hopCount = 0, maxHops =
10
2013-12-20
11:33:00.781 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11cbe40 for url -
https://lyncdiscover.domain-ext.com/ with persistent id as 6
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:00.782 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected].
Sending over direct connection.
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x1201358)
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1783:Successfully started the GetUserUrlOperation
request for http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:00.796 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:00.796 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x12028f0 for url -
http://lyncdiscover.domain-ext.com/ with persistent id as 7
2013-12-20
11:33:00.798 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url http://lyncdiscover.domain-ext.com/. Sending over direct connection.
2013-12-20
11:33:00.798 Lync[563:6d00000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not
setting TLS as the url(http://lyncdiscover.domain-ext.com/) is not https
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:04.104 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 12c5d70
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x12028f0 for release.
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.106 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.109 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1201358)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = http://lyncdiscover.domain-ext.com/, Hops = 1, status = S_OK (S0-0-0)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
UrlTrustResolver(0x1201358): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent
received. Status = S_OK (S0-0-0), url =
http://lyncdiscover.domain-ext.com/
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url.
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
maxHops = 1
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
hopCount = 0, maxHops = 1
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x11d4d38)
2013-12-20
11:33:04.111 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.111 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
Request Id:
0x11d4d38
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x125fa90 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 7
2013-12-20
11:33:04.112 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user.
Sending over direct connection.
2013-12-20
11:33:04.113 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x12028f0.
2013-12-20
11:33:04.261 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 11cfbd0
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11cbe40 for release.
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
Request Id:
0x12450d8
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.264 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x12450d8)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req.
completed, Stopping timer.
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
status = S_OK (S0-0-0)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-UnAuthenticatedGet(0x12450d8): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling
request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/163:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
Hops = 1, status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = , status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.268 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential
for serviceId(1) returning: credType (1) signInName ([email protected])
domain () username (mattia.spagnoli) password.empty() (0) certificate.isValid()
(0) privateKey.empty() (1) compatibleServiceIds(1)
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CMetaDataManager.cpp/467:Sending
Unauthenticated get to get the web-ticket url
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request() to Request Processor queue
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:62d4000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request() to Request Processor
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
GET-AuthenticatedUserGetRequest(0x1201ab8)
2013-12-20
11:33:04.270 Lync[563:62d4000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery
request to https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.270 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x125fa90 for release.
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
Request Id:
0x1206198
HttpHeader:Accept
HttpHeader:X-MS-WebTicket
xxxxxxxxxx
</SentRequest>
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as
current state is 6
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11c0a40 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 15
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request
url was http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:04.272 Lync[563:62d4000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com.
Sending over direct connection.
2013-12-20
11:33:20.621 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags IsWWAN(0):Reachable(0):TransientConnection(0):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(0):IsDirect(0)
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(CellularDataNetwork) -> NoNetwork,
isInAirplaneMode(0) -> 1
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.904 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags
IsWWAN(1):Reachable(1):TransientConnection(1):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(1):IsDirect(0)
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(NoNetwork) -> CellularDataNetwork,
isInAirplaneMode(1) -> 0
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO TRANSPORT CEventChannelManager.cpp/826:Received
network monitor event so restarting event channel.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO TRANSPORT
CEventChannelManager.cpp/520:Moving the event channel aggressive mode.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled
= 1, sipUri = sip:[email protected], m_internalADUrlInput =
m_externalADUrlInput =
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/255:Discovery is in progress and process state is
6Ignoring request to start network discovery
2013-12-20
11:34:04.274 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11c0a40 for release.
2013-12-20
11:34:04.275 Lync[563:62d4000] ERROR UTILITIES CHttpConnection.cpp/517:Connection
timedout for request (0x%u0x12d1ea0) - notifying error E_ConnectionTimeoutError
2013-12-20
11:34:04.275 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of request() with status =
0x22020005
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/201:Request
resulted in E_ConnectionTimeoutError (E2-2-5). The retry counter is: 0
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1206198)
2013-12-20
11:34:04.277 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/581:Received response for meta data request of type 60
with status 570556421
2013-12-20
11:34:04.277 Lync[563:3a71018c] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable
to get a response to an unauthenticated get to url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData
retrieval for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
completed with status 570556421
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting
1 pended Meta data requests for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable
to get the meta data for server url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT CRequestManager.cpp/273:Failing
secure request UcwaAutoDiscoveryRequest with status E_ConnectionTimeoutError
(E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status
E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status
E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received
event for type 0 with status E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/496:Raising Autodiscovery event
with status E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] ERROR APPLICATION
CUcwaAppSession.cpp/2066:Auto-discovery failed, aborting sign-in!
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState()
state=0
2013-12-20
11:34:04.294 Lync[563:3a71018c] INFO UTILITIES
CBasePersistableComponent.cpp/230:Storing 7 out-of-sync components took 10ms
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO UTILITIES CiOsAppStateQuery.h/147:Clearing
keep-alive timer callback
2013-12-20
11:34:04.295 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
UcwaAutoDiscoverySession on sign-out.
2013-12-20
11:34:04.295 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
MetaDataManager on sign-out.
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/64:Alert
received! Category 1, Type 201, level 0, error E_ConnectionTimeoutError
(E2-2-5), context '', hasAction=false
2013-12-20
11:34:04.296 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11cbe40.
2013-12-20
11:34:04.296 Lync[563:62d4000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11c0a40.
2013-12-20
11:34:04.296 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/117:Alert
cleared of Category 1, Type 201, cleared 0 alerts
2013-12-20
11:34:04.297 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-AuthenticatedUserGetRequest(0x1201ab8): E_ConnectionTimeoutError (E2-2-5)
(RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioVideoToastViewController.mm/992:Cancelling
local notification
2013-12-20
11:34:04.299 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x125fa90.
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMRootViewController.mm/378:ActualState
= 0 DesiredState = 2 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI
CMDetailViewController.mm/229:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMDetailViewController.mm/262:ActualState
= IsSignedOut DesiredState = BeSignedIn DataAvailable = 0 Showing UI =
CredentialTableViewController
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/745:adding the
desired view
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20 11:34:04.303 Lync[563:3a71018c] INFO UI
CMUIUtil.mm/1680:Mapped error message is 'Non riesco a connettermi al server
perché potrebbe essere occupato o temporaneamente non disponibile. Riprova.
2013-12-20
11:34:04.304 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] ERROR UI CMDismissButtonBaseViewController.mm/104:after:
self.label.frame height 41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 0
2013-12-20
11:34:04.306 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert is
0
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1089:viewFrame:
origin x 64.000000, origin y 0.000000, height 1024.000000, width 45.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.343 Lync[563:3a71018c] INFO UI
CMToolsViewController.mm/349:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI
CMAlertViewController.mm/93:ObservableListItem Added event received
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/103:showalert
is 1
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20
11:34:04.346 Lync[563:3a71018c] INFO UI CMUIUtil.mm/1680:Mapped error message
is ‘Cannot connect to the server because it could be busy or temporarily
unavailable. Retry.’Hi Kent,
thanks a lot for your reply!
I created _sip._tls.domain-ext.com SRV record in the external DNS and now autodiscovery works fine. At the beginning I had not created it because I thought lyncdiscover.domain-ext.com A record was enough for autodiscovery. I still cannot understand
why lyncdiscover.domain-ext.com points to reverse proxy, while _sip._tls.domain-ext.com points to Edge server. It's strange because both are part of the research order of Lync 2013 desktop clients.
By the way, mobility still does not work. I tried to insert bot the https URLs as manual configuration but Lync 2013 for iPad was not be able to login. I tried to paste both the URLs in the web browser and:
with https://<ExtwebFQDN>/Autodiscover/autodiscoverservice.svc/Root appears the "Root.json" file to be downloaded;
with https://<IntwebFQDN>/AutoDiscover/AutoDiscover.svc/Root
the message "500-Internal error of server" appears.
Any suggests from you about how to check the configuration of ISS/ARR 2.5?
Thanks again! -
Login issues with Mobile Theme 50
Hi All,
I have an APEX 4.2 application (Mobile Theme 50) which is running on Oracle 10g and is being accessed via iPads. Whenever you exit out of the application by clicking on the iPad button and go into any other App, Mail, Calendar etc, you are forced back to the login page, rather than allowing the user to continue from where they were . We have other APEX applications using a desktop theme that will happily let you check your mail and when you swap back to Safari your session is still there and you can continue on from the page you were on when you left.
Authentication is a requirement, but I was hoping that once they login and the session hasn't timed out, that they would be free to move about the iPad without having to login again.
Are there any setting or changes that can be made to change this behaviour?
Cheers
MikeHello,
Hi Mahmoud, sorry I haven't had time to build a sample app, I might be able to knock up a sample this evening.
This appears to be an iPad specif problem. Tested it on a Samsung and it is fine. There is also one other subtle difference on the iPad itself, that is when you save the URL as a bookmark it always opens within Safari so you can open other apps, then go back into the apex app within Safari and your session is happily running. If you save the URL to the Home screen it opens in a full screen mode (with no minimise options) and you cannot jump out of it unless you are ready to login again.
After a bit more Googling I found that in the default Page Template for Theme 50 it has the following Meta Tag in the Header.
<meta name="apple-mobile-web-app-capable" content="yes" />
From what I can gather this will default the application to run in full screen mode.
I made a copy of the page template and removed this tag and it now always runs within Safari. (After removing the link from the iPad home screen and creating a new one....Some odd cache problems seem to happen)
It would be good to have the full screen mode running as it looks neater and obviouly gives you a bit more screen real estate, but removing the meta tags appears to solve the constant login issues....Our users can decide which they prefer.
Cheers
Mike -
hi
We are currently discovering BusinessObjects Mobile BI with focus on Design Studio.
Microsoft TMG is used as reverse proxy having Basic Authentication.
All configured succesfully, test url working fine BUT a few issues we run into:
- Android tablet device working good but not displaying Design Studio documents (WebIntelligence and Dashboards do work)
- iPhone also not showing Design Studio documents
- ALL iOS devices crash during runtime
iOS Mobi app used is 6.1.11
iOS used is 8.1.1
Bi Platform 4.1 SP5
any ideas on our issues?
are there more companys around using TMG?Hi Gerben,
1. Regarding iOS crash
We have observed that certain functionality/workflow crashed the application when using the Mobile BI 6.1.11 and iOS 8.1.
For the same workflow the application was not crashing when using iOS 7.1.
We have raised an OSS with SAP and it is in progress. I suggest you test with different versions of OS and see if the app still crashes.
2. Regarding Design Studio Documents
a) Can you open the Design Studio Application directly from your PC browser ?
b) Suggest you check the access rights for Design Studio as well.
3. Reverse Proxy
Are you facing the same issues without the reverse proxy ?
Regards
Robin -
Softkeyboard issue with mobile skin Textinput
Hi Adobe,
When can we get the fixing of the issue related to the mobile skinning based TextInput. As with the mobile skin based textinpu neither the softkeyboard Type nor AutoCapitalization etc. works.
Can Any one confirm on this??
with Regards,
ShardulHi Nimisha,
You are right enough but I also require the vertical Scrolling on the component which is holding the TextInput box.
If you have any idea please let me know.
It should be done fix for the "spark.skins.mobile.TextInputSkin".
I have reported this bug long ago,hope it will be resolved sooner or later.
https://bugbase.adobe.com/index.cfm?event=bug&id=3292370
with Regards,
Shardul -
Issue with mobile network signal ("Searching")
I recently purchased 2 iPad from Singapore and upon retuning to Malaysia, i applied for 2 mobile broadband package from the same mobile provider.
Issue i am facing is, on one of the ipad, the mobile network signal bar displays "Searching" almost all the time; only a few times it displays strong signal with 3G icon then it drops to "Searching" again. I tried to swap the micro sim around between both ipad but no such issue on the 2nd ipad which is consistenly strong signal.
I even restored the ipad (factory shipped 3.2.2) but no success.
What should i do?After further test, I noticed the unit can't find any mobile provider under Settings > Carrier when signal bar displays "Searching".
Enabling airplane mode does not help either; only workaround is to disable Cellular Data under Settings > Cellular Data then Enable it again. -
DHCP issues with Cisco WAP 321
I have 4 Cisco WAP 321's in my office connected to our Cisco 2911 ISR for DHCP, everything is fine on the office wifi on vlan 1 but vlan 3 with the guest wifi network it fails to obtain an IP address. I have tried under each of the WAPs to make sure it wasnt just the one nearest my desk. I was on the phone yesterday with Cisco about this and we turned on debugging and watched the DHCP requests and no requests even hit the ISR (only thing I have smartnet support on). I noticed our firmware was a few versions old so updated that this morning but still have the same issues so now I am turning to you all to help me figure this out.
Thanks
Jake
This topic first appeared in the Spiceworks CommunityI have 4 Cisco WAP 321's in my office connected to our Cisco 2911 ISR for DHCP, everything is fine on the office wifi on vlan 1 but vlan 3 with the guest wifi network it fails to obtain an IP address. I have tried under each of the WAPs to make sure it wasnt just the one nearest my desk. I was on the phone yesterday with Cisco about this and we turned on debugging and watched the DHCP requests and no requests even hit the ISR (only thing I have smartnet support on). I noticed our firmware was a few versions old so updated that this morning but still have the same issues so now I am turning to you all to help me figure this out.
Thanks
Jake
This topic first appeared in the Spiceworks Community -
IPhone / iPad login issues with Mobile Theme
I'm wondering if this is a bug or just a part of design of the mobile theme. I'm developing a mobile site using the new mobile theme in 4.2.1. I open it up on Safari on either an iPhone or iPad and then want to add it to the home screen. No issues there.
I'm able to sign in fine with the shortcut on the home screen, but if I switch to another app or go back to the home screen and return to the APEX app, I always have to log in again. Pretty inconvenient to keep having to do this. Anyone aware of a work around or fix?
Here's a sample app where it can be seen:
http://apex.oracle.com/pls/apex/f?p=14837:1:115417454230874:::::
guest / test123Hi,
When you made a shortcut on our device, then it technically stores the url. then the session value is also captured. so when you return from another app to the home screen and click the icon on url device it resets the session everytime you go through that url as it no more esists or active. So its asking you to log back in -
When I connect my MBP via direct ethernet cable, I have no issue. However, when I connect my Time Capsule to the modem and try and connect using wifi I do not get any joy.
The cable modem I use come from TekSavvy in Canada and seems to function correctly when connecting my MBP directly. However, the Time Capsule does not connect. I have used the Airport Utility and it looks as though the IP address shown is wrong -- I have renewed the DHCP lease when connected by ethernet -- and I wonder if that is problem. When I use the edit function, there is a button to renew the DHCP lease but when I click it nothing seems to happen.
This set up was working without issue two days ago. I woke up to find that my modem was not 'provisioning'. I called my ISP who have cleared that error but now I can not connect through my Time Capsule.
Any thoughts?
EThis set up was working without issue two days ago. I woke up to find that my modem was not 'provisioning'. I called my ISP who have cleared that error but now I can not connect through my Time Capsule.
Any thoughts?
This was looking pretty easy and standard problem until this point... ahhh... why do things work and then stop working.. hard to say. Cable being a fairly mysterious thing at the best of times.
Several things matter..
Did it work only only one computer.. when it was working, were you able to have several devices connected.. if you only tested with one, it could have always been wrong.
I need you to clarify...
When I connect my MBP via direct ethernet cable, I have no issue. However, when I connect my Time Capsule to the modem and try and connect using wifi I do not get any joy.
Direct ethernet cable to the Modem or to the TC??
When you swap over and plug the TC into the modem, are you power cycling the modem.. this is essential unless the modem is also working as a router.
Tell us modem model and if you know which it is .. modem or router and if running in router mode.. otherwise tell us the IP you get when you plug the MBP into the modem by ethernet.. assuming that is the case.
Power cycle the modem for at least 20min whenever you swap.. some ISP will accept less.. 5min.. and some require more, several hours. Check with the ISP for time required.
What model TC and is it in router mode?
What firmware is it running?
I have renewed the DHCP lease when connected by ethernet -- and I wonder if that is problem. When I use the edit function, there is a button to renew the DHCP lease but when I click it nothing seems to happen.
Please post a screenshot of the IP you get.. or tell us the details.. You can blank out or cover the last numbers if you are actually getting public IP.. but if private IP leave it.. as it is irrelevant if you post it. -
Bb 9860 sku2 having issue with mobile ntwk connection
I have BB9860 unlocked phone bought thru rim employee. It worked fine with Chatr carrier gsm voice only. Now, it gave me 507 error. i reload the software from SaskTel, and device bootup fine. but never able to connect to cellular ntwk anymore. i tried videotron carrier OS download as well, same issue. The device shows in the desktop manager as CDMA device for radio type. How can I make it to work for GSM voice?
I tried rogers OS load and not going thru, since it didn't show OS to be loaded, i beleive due to same verision detected. I deleted the vender.xml file before every OS load. Please help.Hi and Welcome to the Community!
The only difference in loading different carriers OS packages is that each may have a different version. Loading the exact same version from different carriers will not result in anything different.
The 9860 has multiple band capabilities...but you must set that in the Manage Connections area. But...
ssomasun wrote:
The device shows in the desktop manager as CDMA device for radio type.
That is a bit odd, since from all I understand the 9860 does not even have a CDMA radio...the 9850 does, but not the 9860. Refer:
http://www.gsmarena.com/blackberry_torch_9860-3926.php
http://www.gsmarena.com/blackberry_torch_9850-4088.php
One might almost wonder exactly what device you have...you might want to talk to whoever provided it to you, perhaps it's some sort of non-standard hybrid or engineering-only device, and therefore might require very special handling not available to the general public.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Issues with mobile YouTube.
I'm having issues while using YouTube in my safari app. Videos will constantly freeze and not play, while the video time keeps going and buffering. It used to only do this one excessively long videos, but now almost every single video is doing this,regardless of length. It started doing this around a week ago and I don't know why.
Hi erewhon,
Welcome to the forum.
This is a strange problem, if it's still happening can you drop me an email with your forum username and your BT account details so I can run a few checks on my end? Click on my profile and look under "about me" to get our email address.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Maybe you are looking for
-
Mac OS X 10.4.8 Update download
We have dial-up connection through Juno because we do not have any high speed internet available were we live. We were unable to retrieve the Mac OS X 10.4.8 update due to the size of the update. Our internet connection is lost before it comes close
-
The 30 October i buy a macbook pro with retina display (On Apple store) And it's suppose to receive a invoice by Email but i don't have anything ?? Thanks
-
Disappearing midi tracks.
I can no longer drag and drop .mid or .MIDI files into GB. When I try, the track files flash and disappear. Please help. c
-
Ipod disabled and i can't for the life of me restore it HELP PLEASE!
Okay so last year I bought an ipod touch 2nd gen off a friend I lost it 3 months later the other day my mom managed to find it in the stuff I left behind. It's passcoded to prevent my brother hacking into it, and wouldn't you know it I can't hack it
-
Hi, We've configured our PI to collect mail alerts (base on http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154&overridelayout=true). when a new rule (at Runtime Workbench->Alert Configuration) is being created