Dhcp status are not received on sg300-20

Hello,
I am configuring vlan on sg300-20 in dhcp mode.
One vlan (5) that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
The other four vlans dhcp status are not received
Kindly help me check this. Thanks
switch4ba497#sh running-config
config-file-header
switch4ba497
v1.2.9.44 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 5,10,20,30,40
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.3.1
ip dhcp information option
no boot host auto-config
bonjour interface range vlan 1
hostname switch4ba497
line telnet
exec-timeout 0
exit
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
15
ip http timeout-policy 0 http-only
ip name-server 192.168.1.1 192.168.3.1
ip telnet server
interface vlan 1
ip address 192.168.2.254 255.255.255.0
no ip address dhcp
interface vlan 5
name WAN
ip address dhcp
interface vlan 10
name Studio
ip address dhcp
interface vlan 20
name Service
ip address dhcp
interface vlan 30
name Admin
ip address dhcp
interface vlan 40
name Data
ip address dhcp
interface gigabitethernet1
switchport mode access
interface gigabitethernet2
switchport mode access
switchport access vlan 10
interface gigabitethernet3
switchport mode access
switchport access vlan 10
interface gigabitethernet4
switchport mode access
switchport access vlan 10
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 10
interface gigabitethernet7
switchport mode access
switchport access vlan 10
interface gigabitethernet8
switchport mode access
interface gigabitethernet9
switchport mode access
switchport access vlan 20
interface gigabitethernet10
switchport mode access
switchport access vlan 20
interface gigabitethernet11
switchport mode access
switchport access vlan 20
interface gigabitethernet12
switchport mode access
switchport access vlan 20
interface gigabitethernet13
switchport mode access
switchport access vlan 30
interface gigabitethernet14
switchport mode access
switchport access vlan 30
interface gigabitethernet15
switchport mode access
switchport access vlan 30
interface gigabitethernet16
switchport mode access
switchport access vlan 30
interface gigabitethernet17
switchport mode access
interface gigabitethernet18
switchport trunk native vlan 40
interface gigabitethernet19
switchport mode access
switchport access vlan 5
interface gigabitethernet20
switchport trunk native vlan 5
switch4ba497#sh ip int
    IP Address         I/F       Type     Directed   Precedence   Status
                                          Broadcast
0.0.0.0/32          vlan 10   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 20   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 30   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 40   DHCP        disable    No         Not
                                                                received
192.168.2.254/24    vlan 1    Static      disable    No         Valid
192.168.3.102/24    vlan 5    DHCP        disable    No         Valid
switch4ba497#
I also do not understand why the ip address is 0.0.0.0/32.
Becuase the dhcp address 192.168.3.1/24
Thanks.

Hello Tom,
Yes i can feel you taking me toward the solution.
Actually I have an ADSL router that has DHCP capability and my vlan interfaces are to receive ip address from it.
The adsl router Ip address is 192.168.3.1
Vlan 5 WAN which is directly connected to the adsl router get Ip address while the other vlan do not.
When I assign port from other vlan to vlan 5 and I attach host to the port they get ip address and go on internet. The strange thing is that the other vlan do not get ip address. Thanks.

Similar Messages

Vlans dhcp status are not received

Hello,
I am configuring vlan on sg300-20 in dhcp mode.
One vlan that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
The other four vlans dhcp status are not received.
Kindly help me check this. Thanks
Below is the config log:
switch4ba497#sh running-config
config-file-header
switch4ba497
v1.2.9.44 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 5,10,20,30,40
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.3.1
ip dhcp information option
no boot host auto-config
bonjour interface range vlan 1
hostname switch4ba497
line telnet
exec-timeout 0
exit
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
15
ip http timeout-policy 0 http-only
ip name-server 192.168.1.1 192.168.3.1
ip telnet server
interface vlan 1
ip address 192.168.2.254 255.255.255.0
no ip address dhcp
interface vlan 5
name WAN
ip address dhcp
interface vlan 10
name Studio
ip address dhcp
interface vlan 20
name Service
ip address dhcp
interface vlan 30
name Admin
ip address dhcp
interface vlan 40
name Data
ip address dhcp
interface gigabitethernet1
switchport mode access
interface gigabitethernet2
switchport mode access
switchport access vlan 10
interface gigabitethernet3
switchport mode access
switchport access vlan 10
interface gigabitethernet4
switchport mode access
switchport access vlan 10
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 10
interface gigabitethernet7
switchport mode access
switchport access vlan 10
interface gigabitethernet8
switchport mode access
interface gigabitethernet9
switchport mode access
switchport access vlan 20
interface gigabitethernet10
switchport mode access
switchport access vlan 20
interface gigabitethernet11
switchport mode access
switchport access vlan 20
interface gigabitethernet12
switchport mode access
switchport access vlan 20
interface gigabitethernet13
switchport mode access
switchport access vlan 30
interface gigabitethernet14
switchport mode access
switchport access vlan 30
interface gigabitethernet15
switchport mode access
switchport access vlan 30
interface gigabitethernet16
switchport mode access
switchport access vlan 30
interface gigabitethernet17
switchport mode access
interface gigabitethernet18
switchport trunk native vlan 40
interface gigabitethernet19
switchport mode access
switchport access vlan 5
interface gigabitethernet20
switchport trunk native vlan 5
switch4ba497#sh ip int
    IP Address         I/F       Type     Directed   Precedence   Status
                                          Broadcast
0.0.0.0/32          vlan 10   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 20   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 30   DHCP        disable    No         Not
                                                                received
0.0.0.0/32          vlan 40   DHCP        disable    No         Not
                                                                received
192.168.2.254/24    vlan 1    Static      disable    No         Valid
192.168.3.102/24    vlan 5    DHCP        disable    No         Valid
switch4ba497#
Also i do not understand why the ip address is 0.0.0.0/32 because the dhcp server ip address is 192.168.3.1

Dear Customer,
Thank you for reaching Small Business Support Community.
In Layer 2 system mode, only the management VLAN can be configured with a static or dynamic IP address. In Layer 3 system mode, all the interface types (ports,LAGs, and/or VLANs) on the device can be configured with a static or dynamic IP. Configuring the device to work in either mode is performed in the Administration >System Settings page
When a DCHP Client starts a discovery process, it assigns a dummy IP address 0.0.0.0 before the real address is obtained. This dummy address has the status of “Not Received”.
Pretty much your problem should be solved by changing to Layer3 system mode. Please let me know if anything comes up and/or if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Can't accept BBM invitations and Invites sent show as "Pending for Authorization" but recipients are not receiving them either (PIN Message Status : Service Blocked)

I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages but I got a red x next to the message and the status says: "Service Blocked" .
When my phone got lost, I was lucky that I just synchronized my device to my BB Desktop. Not only was I able to retrieve my contacts (phonebooks and BBM) but also ALL txt msgs and even call logs
Anway, that happening, I assumed I don't need to re-send all my BBM friends invites since some were able to communicate with me. But for those who have deleted my profile (knowing it got lost) and were still on my contact were the ones affected. I tried deleting them and sent an invite only to find out that: I can't accept BBM invitations and Invites sent shows as "Pending for Authorization" but recipients are not receiving any. (they also have the same pending for authorization notice on their end)
When I tried to send them a PIN message I get a red x next to the message nd get the service blocked message.
Help I do not know what else to do.
** FYI: new contacts added with my new PIN have no prob sending invites and me accepting them all.

Hello Lhea,
This issue is most likely Caused by the BlackBerry not being provisioned for BlackBerry Data Services.
Please have a look at the following article that covers "Service Blocked" when sending a PIN message:
http://btsc.webapps.blackberry.com/btsc/KB19244
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Idocs are not received in Destination side.

Hi Friends,
I have a small doubt regarding SM58.
I have 2 dev systems.
client 100 & 200 we are send the Material data from 100 to 200.
In 100 system all are fine and the status is 12 and green but those are not received in 200.
When we check in 200 all the IDOCs are strucked in SM58(TRFC queue).
Please suggest me?
Regards,
Venkat.

Hi,
Please check the system RFC connection in WE21 and resend.
Regards,
Nandha

Windows users are not receiving attachments sent out of Mail

I am a consultant. I use Mail in Snow Leopard. Software is up to date.
Our business uses Microsoft Exchange Server 2003. All other consultants in the company are using Windows. In Mail I connect via IMAP. It has worked flawlessly until recently.
Recently, my corporate clients (various clients not related to one another nor using the same email server) have complained that they are not receiving my email attachments. It is not universal. It is inconsistent, even with the same client. Sometimes the attachments are there and sometimes not.
I have verified two things. 1) That the attachments are present in the emails in my outbox. 2) That the emails leave our server with the attachment (I accomplished this by contacting our Microsoft Exchange service provider and giving them examples, which they tracked down and verified that the emails left them with the attachments.).
Our service provider suggested that Mail is adding something to the email that is causing Outlook (the common denominator is that the clients receiving the emails are all on Outlook) to strip the attachment. Or, the antivirus is stripping it. Something about the Mail email is causing Outlook or some antivirus software to strip the attachments.
Has anyone else encountered this? Is there something that can be done?
Right now I've had to go to Thunderbird in order for my attachments to be received. I'd rather stay with Mac all the way, but I cannot trust that my clients will receive attachments.
I'm hoping that when our company changes to MS Exchange Server 2007, that the problem will go away, since Mail can interface with the 2007 version directly. But, until then, I would really like to stick with Mail, if I can find a work around.
Thanks.
Matt

I am now having exactly the same problem. But here is a new wrinkle. ALL the persons having the problem you describe - that attachments are stripped off - are using cox.net as their e-mail provider. I am not saying that all cox.net mail users are having the problem, but those having the problem are among the cox.net e-mail users. None of my recipients using aol.com, yahoo.com, gmail.com, verizon.net, zona.net, etc. are having any problems. Only some of the cox.net e-mail users.
I suspect but have not checked that they are all PC users (I use a Mac with Mail) and, now that I have become aware of this thread, I will check if they use Outlook.
It started a few months ago. I had no problems before and now this, with the same people. Obviously something must have changed but what?
Please let me know if you have found anything more about this - or even a solution? :-)

SahrePoint 2013 Server & Project Server 2013 - Notifications and reminders are not received by certain users

Dears,
We have recently implemented MS EPM 2013 where we started to face some strange behavior with the standard alerts and reminders sent from the system.
Minor number of the users (with different levels of privileges from administrators to team members) are receiving emails and alerts normally (either when they are assigned on project schedule tasks or SharePoint list items alerts) without any issues however
the. on the other hand the other majority number of resources are not receiving any kind of alerts from the system (neither from Project Server Nor from SharePoint).
knowing that, all the resources/users have their emails configured properly, and their other attributes are almost the same for all users. all the emails are stored on the same exchange server.
Anyone can help on this please.
Appreciate your cooperation.
Ibrahim Al-Masri Technology Manager at MethodCorp

Thanks Dinesh,
Actually the users have this global permissions configured for them and yet they weren't receiving emails.
We Just could solve this puzzle, all what we needed to do is to configure the
RBS for the majority for the users who weren't receiving emails.
Welcome to EPM 2013 UN-unannounced changes.
Ibrahim Al-Masri Technology Manager at MethodCorp

Documents I forward are not received under the original document name. How do I solve this?

Documents I forward are not received under the original document name. How do I solve this?

If you're referring to the name of the attatchment showing when viewing the entire email, that's there's no way to change how it's done. The title and body of the actual document is unchanged after it's opened.
Does this naming of the attachment really confuse the recipient? If so, put something in the body of the email to make it clear what's attached.

Some clients are not receiving my mail attachments.

Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem. This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something? I like my apple mail and don't want to switch, but this is a real problem for me. Help, please!

We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues.

HT2736 recipients are not receiving gifted music

I've gifted music, but they are not receiving it?

Do the recipients have access to the folios?

Using Verizon Messaging and people are not receiving my texts NOR am I receiving texts that were sent to me! Went to old iphone and disabled imessaging but still not working. I'm a big texter for personal and business and am ready to go back to iPhone.

Just got the Samsung Galaxy s5 and am very frustrated that I am not receiving text messages that were supposedly sent to me. Also, it says 'sent' but it is never delivered. Or it might get delivered but mine still just shows being sent. I re-started that phone and disabled my texting on my old iphone as some have suggested. I'm ready to go back to the iphone just because of this issue. Please fix this Verizon!

I'll tell you it is some marketing coup that a problem Apple has created and has control over is being passed off on Verizon.
This problem is the result of you migrating from iMessage, a messaging platform controlled completely by Apple, back to a more mainstream messaging system of SMS/MMS. Verizon has no control over other iPhones "thinking" you are still using iMessage. NOTHING Verizon can do will fix this problem.
Try texting the word "stop" to 48369. Others have reported this has worked. Doing this should de-register your number with the iMessage system. You should receive a confirmation reply. It may take a day or 2 for other iPhones to completely register that your number is no longer associated with iMessage. You can also try calling Apple support and let them know you are not receiving messages from iPhone users after switching to an android phone from an iPhone.

All my BBM contacts are not receiving my broadcast messages

is there a message limit on the torch , i have 1500 contacts and alot of my contacs say tthey are not receiving the broadcast

In the past the limit was 1,000 contacts, and that was increased when BBM was upgraded to v 5.0.0.57, however that relates to the number of contacts in the Messenger.
I have a feeling that you sending 1500 broadcast messages is too many at one time. If I were you, I'd create contact Groups A, B, C, etc., maybe 500 in each and send less at a one time.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRI

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

SAP Approvers are not receiving email

Hi Gurus,
Please find the below issue and send me the solution .
It would appear that SAP Approvers are not receiving email notification when invoices are posted to their SAP box, which is causing delays in payment.
Thanks & Regards,
Chiranjeevi.

Thomas,
Let me add this information. Some, but not all of the PO and AP email notifications are being delivered to Outlook. For years we have been running a modified version of RSWUWFML2 for Purchase orders and AP invoice approvals with no issues. At the beginning of this month, unbeknownst to us, our HR group scheduled RSWUWFML to run only for HR Appraisal Review notifications. Our job runs once per hour at a quarter past the hour. Their job runs every 20 minutes. Since both jobs update table SWU_WLSCAN, I suspect that our job is only seeing the last 15-20 minutes of work items as being eligible for delivery because RSWUWFML has modified the last run date. Does this sound right? If so, how can they be run together?
Thanks,
-don.

I just started using Adobe Send but customers are not receiving my emails

I am using Adobe Send to send pdf files to my customers. I choose my files, enter my customers email address & copy me...hit send.
However, my customers and myself are not getting my emails...anyone else have this happen? How do I fix? I can't track the emails if my recipients are not receiving them?!

There are still many accounts who are not getting the emails…what I am doing is copying myself at my msn.com as that account seems to get all of them.
So then once received, I then forward them from my msn email address. Then they get them.
I think they get put in spam or blocked because because the from email address says (faked from)
My bigger question — my links are expiring – this link below doesn’t work anymore???
<https://files.acrobat.com/a/preview/a0aaa21d-d509-4ac5-b6b4-6f0c3eec337a> <https://files.acrobat.com/a/preview/b3a351a3-3b8a-4d94-b9eb-a71fc693f1a3> <https://files.acrobat.com/a/preview/17e2ba1f-d971-4bd8-955d-0ab2729dbdd9> <https://files.acrobat.com/a/preview/5f834289-94e9-42c2-898d-75ed90595064> NEW! ONLINE CATALOGS! <https://files.acrobat.com/a/preview/a0aaa21d-d509-4ac5-b6b4-6f0c3eec337a> <http://tinyurl.com/CatalogsApril2015> <https://files.acrobat.com/a/preview/fbe2dd3b-cc8f-434e-8350-18b2b8977acc> <https://files.acrobat.com/a/preview/b3a351a3-3b8a-4d94-b9eb-a71fc693f1a3> <https://files.acrobat.com/a/preview/17e2ba1f-d971-4bd8-955d-0ab2729dbdd9> <https://files.acrobat.com/a/preview/5f834289-94e9-42c2-898d-75ed90595064> Shop by Brand or Occasion! <https://files.acrobat.com/a/preview/a0aaa21d-d509-4ac5-b6b4-6f0c3eec337a>
Jane Bayer
Evergreen Colorado Territory Manager
303-946-3648 Cell
1-800-921-1198 Fax
www.myevergreen.com<applewebdata://D4BD4473-0E8C-4F3E-95A4-742A945BE6B0/www.myevergreen.co m>
Product Videos!<http://www.myevergreenonline.com/t-productvideos.aspx>
How to register online!<http://help.myevergreenonline.com/en/knowledgebase/how-to-register-for-an-account/>

Topic subscribers are not receiving message

          I have created a topic (persisted in a RDBMS) in a WL6.1 server. The topic has
          2 JMS-bean subscribers.
          A JMS client program has located and published 15 messages to the topic successfully.
          But, the subscribers are not receiving the messages.
          Any ideas?


Hi Lian,
          Need more info, if you're still having a problem. (Zach and I have been on vacation.)
          Is the MDB on the same server as the JMS server? (Not required.)
          Are there any error messages in your log file?
          What service pack (SP) are you using?
          Does the MDB work if you change the descriptors to use a queue? How about a non-durable
          subscriber?
          Please post your config.xml and descriptor files.
          Tom
          Lian wrote:
          > For a message driven bean, I don't think I need to do connection.start(), and the
          > bean has no selector. The bean will receive all message from a topic.
          >
          > I can send messages to the topic, and I can see the topic has 2 durable subscribers.
          > Each subscribers (JMS beans) has 20 in "Messages Current Count" column. But the
          > JMS bean is never activated; none of its method has ever been called.
          >
          > I think this is a Weblogic configuration issue. Is there anything that can inactivate
          > or "freeze" a message driven bean?
          >
          > Lian
          >
          > "Zach" <[email protected]> wrote:
          > >did you do a connection.start() for the subscribers? are the subscribers
          > >using a selector?
          > >_sjz.
          > >
          > >"Lian" <[email protected]> wrote in message
          > >news:[email protected]...
          > >>
          > >> I have created a topic (persisted in a RDBMS) in a WL6.1 server. The
          > >topic
          > >has
          > >> 2 JMS-bean subscribers.
          > >>
          > >> A JMS client program has located and published 15 messages to the topic
          > >successfully.
          > >> But, the subscribers are not receiving the messages.
          > >>
          > >> Any ideas?
          > >
          > >

Dhcp status are not received on sg300-20

Similar Messages

Maybe you are looking for