DHCP subnet settings blasted by 10.7.1 server update?

I dutifully applied the 10.7.1 update this evening to my Mini Server (July 2011) and restarted.
Some of the clients on my network were fine but others - those whose DHCP leases expired - had issues getting a new lease. In fact, when these devices were restarted they could not get an IP address at all.
After fiddling around it seems that the subnet which was on previously had been set to off by the reboot. Re-checking the subnet seemed to work but only partially. Some of the subnet settings had been flushed too. Specifically, the router, DNS and search domain settings were reset.
On resetting these settings it all came back to life.
BTW, After much frustration over the past few weeks I have gone with the 192.168.2.xxx set up as proscribed in the k-base article which had been working fine for me until this update.
Looking forward to 10.7.3? I can't imagine all these bugs will be ironed out in the next point release...
Has any one tried using settings other than the settings in the knowledge base article under 10.7.1?

There is a Lion Server Forum where you might be able to get help.
Regards,
Colin R.

Similar Messages

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

EA6400 Question. DHCP always sets router IP as first DNS server

Subj, is it ok? DNS server 10.2.2.1 removal from list does not changes situation.
DHCP client settings:
Current firmware 1.1.40.160989

It makes no difference. Support has no complaints on this issue. But it is a pain in da a55 in conjunction with this

Outlook 2010 "Your automatic reply settings cannot be displayed because the server is unavailable" error

Hi,
We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
/Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
Thank you,
Craig

Please verify IIS
settings:
======================
On Exchange CAS
server, open IIS console,
Go to default web site, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click Autodiscover, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click EWS, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Click OAB, double click “SSL
Settings”, make sure Client Certificates is set to “Ignore”
Please run IISRESET command to load the changes.
Thanks.
Tony Chen
TechNet Community Support

Outlook 2013: Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable

When I configure the Outlook profile manually then receive warning "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable" when clicking "Automatic Replies (Out of Office)".
However if I use Autodiscover to configure the Outlook profile the above does not occur and "Automatic Replies (Out of Office)" works fine.
Client: Outlook 2013 Click-to-Run version 15.0.4551.1011 on Windows 7 Pro SP1.
Server: Exchange 2007 SP3 on Windows SBS 2008 SP2.

Hi,
First of all, please make sure you have installed this Outlook 2013 hotfix package (December 10, 2013):
http://support.microsoft.com/kb/2825652/en-us
It may fix the issue.
If the hotfix doesn't help, please note, this problem can occur after your primary SMTP address changes. The problem occurs because your previous primary SMTP address is cached in the Windows registry under your Outlook profile and this information does
not get refreshed for 24-48 hours after the SMTP address change.
So please make sure you have configured smtp address correctly, or, we can find some workarounds from the link below:
http://support.microsoft.com/kb/2693800/en-us
Regards,
Melon Chen
TechNet Community Support

Exchange 2007 / Outlook 2013 "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable"

One of our users is having problems setting replies from Outlook on his local PC. This is an SBS 2008 Server with Exchange 2007. The client PC is running Windows 8 with Outlook 2013. This issue doesn't seem to affect other users but this
is the only client with Outlook 2013.
When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable". Outlook seems to be connecting and working fine so connection to the server does
exist.
Trying this same operation from owa works without issue. Please let me know what we need to do to find a solution.
Thanks so much!

Problem:
IMAP downloads inbox don't work after November patches.
If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
Fully patched O2K10 works fine too.
It worked for my customer until November patch Tuesday broke the IMAP sync.
Consultant opened case.
Response from Microsoft:
        This is with regards to the issue faced by you due to regression         caused by November security update. This is further to inform         you
that fix is out and below is the download links for 32 bit         and 64 bit of the office suites. You need to apply all 3 hotfix.         The crash issue and IMAP issue would get resolved
immediately         while the issue related to Free / Busy and OOF not getting set         would take 24-36 hours to start working once the patch is
applied.
Below
        are the KB articles:
Description
        of the Outlook 2013 hotfix package (Outlook-x-none.msp):         December 10, 2013:
http://support.microsoft.com/kb/2825652
Description
        of the Word 2013 hotfix package (Word-x-none.msp): December 10,         2013:
http://support.microsoft.com/kb/2837674
Description
        of the Office 2013 hotfix package (       2013:
http://support.microsoft.com/kb/2849994
    Description of the Office 2013 hotfix package (   December 10, 2013:
    http://support.microsoft.com/kb/2849994
Issues that this hotfix package fixes
Consider the following scenario:
You have a SharePoint Server environment that has complex             workflows.
You implement the ReceiveTimeOut registry entry to             increase the global timeout to 90 seconds.
You click Open this task             button to open a workflow task in Outlook 2013.
        In this scenario, when you click any approval option from the         popup dialog box, you receive the following error message:
This task could not be updated at this               time.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A is located on an on-premises Exchange             Server, and User B is located on Cloud.
Both the on-premises Exchange Server and the Cloud enables             the Federation Trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and             Existing Outlook Profiles Group Policy settings and enable             it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode registry entry and set             to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
    Description of the Word 2013 hotfix package (Word-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2837674
    Assume that you open a meeting request in a separate window in     Outlook 2013. When you click
Accept and     then click
Send Reply Now,     Outlook crashes.
    Description of the Outlook 2013 hotfix package (Outlook-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2825652
Issues that this hotfix package fixes
Assume that you have a recurring appointment that does not         have a subject. You make some changes to one instance of the         appointment and then save the instance. When you
try to open or         delete the instance, Outlook may crash. Additionally, when you         drag-and-drop one instance of the appointment to a different
time in the calendar, Outlook may crash.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A has a mailbox that is located on an             on-premises Exchange Server, and User B has a mailbox that             is located
on Cloud.
Both the on-premises Exchange Server and the Cloud enable             the federation trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached               Exchange Mode for new and Existing Outlook Profiles             Group Policy
settings and enable it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode
registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
Consider the following scenario:
You have two Active Directory forests (Forest A and Forest             B).
User A and User B have their mailboxes that are located on             Forest A.
User A share his own calendar with User B with Full             Details permission.
User B add the shared calendar and let it sync.
You move User B’s mailbox to Forest B.
        In this scenario, the shared data in the shared calendar is         removed every second time that User A restarts Outlook. And it         is re-synced
when User A browses to the Calendar module.
Unfortunately TechNet isn't coming back, sorry folks :-(
The 3 patches above immediately fixed the issue for me!
Thanks so much!

Updated iPhone 4S to ios7. Now there is a number 1 on my settings icon as if there is an update? What does that mean?

I updated my iPhone 4S to the ios7 and now have a number 1 showing on my settings icon as if there were an update. I am completely updated. What does it mean? How do I get it off?

It means upi need tp plug it into iTunes and restore it.

Configurational settings for data source in BI server

Hi Sdns,
Where can we make configurational settings for data source in BI server.
Advance thanks to replies.
karun

Go to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.

[svn] 1179: - added setup and storing settings in a separate file to facilitate updates .

Revision: 1179
Author: [email protected]
Date: 2008-04-10 11:58:03 -0700 (Thu, 10 Apr 2008)
Log Message:
- added setup and storing settings in a separate file to facilitate updates.
- fixed support for paths with spaces (i.e diffpack pack "c:/my documents/egeorgie/package")
- fixed to handle relative paths in the arguments
- fixed to create and include a .patch file in the package
- added readme.txt
Modified Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack.mxml
Added Paths:
flex/sdk/trunk/tools/diffpack/diffpack
flex/sdk/trunk/tools/diffpack/diffpack.air
flex/sdk/trunk/tools/diffpack/readme.txt
Removed Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack

Revision: 1179
Author: [email protected]
Date: 2008-04-10 11:58:03 -0700 (Thu, 10 Apr 2008)
Log Message:
- added setup and storing settings in a separate file to facilitate updates.
- fixed support for paths with spaces (i.e diffpack pack "c:/my documents/egeorgie/package")
- fixed to handle relative paths in the arguments
- fixed to create and include a .patch file in the package
- added readme.txt
Modified Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack.mxml
Added Paths:
flex/sdk/trunk/tools/diffpack/diffpack
flex/sdk/trunk/tools/diffpack/diffpack.air
flex/sdk/trunk/tools/diffpack/readme.txt
Removed Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack

HT4623 i have an iphone 4 but when i go to general n settings there is no option as software update . pls help

i have an iphone 4 ios 3.1.3 which is outdated . i went to settings , general but there was no software update feature . its on all other phones same models which myfriends have . can anyone help.

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Note: Are you certain you have an iPhone 4?

HT4623 when i go to settings then general there is no software update? i am trying to up date my phone...

when i go to settings then general there is no software update? i am trying to up date my phone...

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

HT4623 I'm trying to update my ipad software but when I go to settings-general, I don't see "software update" as an option!!??

I'm trying to update my ipad and when I go to "settings" then "general" there is no "software update" choice??

If you are running iOS 4 or earlier you will have to update using iTunes on your computer.

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT4972 My general settings menu does not have a software update option- how do I update? Thanks

Hi,
I am really struggling to update my iphone software. I believe that I am currently on version 4.2.1 and would like to update yet my general settings menu does not offer a software update option.
What would be the best steps to take?
Any help would be great.
Thanks
T

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

I have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly

i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly

An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible. The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone.
Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models.

DHCP subnet settings blasted by 10.7.1 server update?

Similar Messages

Maybe you are looking for