Dhcpcd issues when updating my pacman

I have read the wiki, and know that we could get the issues with filesystem. However I can't get this to work correctly when doing pacman -Syu. Using the issue with the dhcpcd I tried to look for similar packages that own those files.
dhcpcd: /usr/bin/dhcpcd exists in filesystem
dhcpcd: /usr/lib/dhcpcd/dhcpcd-run-hooks exists in filesystem
dhcpcd: /usr/lib/systemd/system/dhcpcd.service exists in filesystem
dhcpcd: /usr/lib/systemd/system/[email protected] exists in filesystem
dhcpcd: /usr/share/licenses/dhcpcd/LICENSE exists in filesystem
dhcpcd: /usr/share/man/man5/dhcpcd.conf.5.gz exists in filesystem
dhcpcd: /usr/share/man/man8/dhcpcd-run-hooks.8.gz exists in filesystem
dhcpcd: /usr/share/man/man8/dhcpcd.8.gz exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by Jzarecta (2015-06-16 11:34:13)

Jzarecta wrote:Thats where I am stuck since the wiki doesnt address anything further.
Sure it does, the fourth sentence from the link I gave:
wiki wrote:If the file is not owned by another package, rename the file which 'exists in filesystem' and re-issue the update command. If all goes well, the file may then be removed.
As for others experiencing this - no, that is not the case. Something has gone wrong on your system. Either you installed dhcpcd manually circumventing pacman, or your package database was corrupted.

Similar Messages

Indesign 5.5 crash issues when updating links

I am having crash issues when updating links and I don’t know how to trouble shoot the issues.
I have adobe creative suite 5.5 and I am using a third party plug in called wordsflow to allow updating of MS word documents without losing formatting in Indesign.
I have been in contact with the plug creator and they seem to think that the way the indesign importer is handling images is causing the problem.
I am not a particularly experienced Indesign user. How do I go about working out what the issue is?

At first it does appear that the plug in is the problem, however i suspect that the builders of the plugin are correct, in that it is the way in design in handling images in links.
the problem is worse when any image in anchored any where with in the document.
when the updating links screen pops up, the point where it freezes and then indesign crashes is infact on a linked image file consistantly.
broswing other indesign link issues it appears i am not the only person with image link problems.
My question is aside form turning off the plug in, what else can i do to search for the potential issue?

Crm plugin issue when updating parent account field in account.

Hi ,
In my CRM Application ( CRM 2011) we have accounts and contacts. when account parent account is updated their contacts owner id will be updated in crm db server and external server using notification service which is called by pulgin.
so in one of my account has 6000+ contacts ,when updating accounts parent account id from crm , screen disabled and after 4 to 6 mins sql error message screen displayed.
below is the eventviewer log ,
The Web Service plug-in failed in OrganizationId: 457b2390-e086-485f-9b05-
094f6410abef;
SdkMessageProcessingStepId: 63cdbb1b-ea3e-db11-86a7-000a3a5473e8; EntityName: account; Stage: 30;
MessageName: Update; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel,
Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35;
ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin;
Exception: Unhandled Exception: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
   at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
   at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
If i debug the account update code plugin it seems to be working fine (means updated parent account id and contacts ). if i remove debugger and hit on save from crm , throws error.
this is high priority issues , im struggling from past 3 days could get any solution.
if any one helps really appreciated.

First.
If you use plugin for send information to any external system you create small intergation.
For integration use must create async plugin. On your trace ( account; Stage: 30;) you use sync plugin.
Second
For increment CRM timeout add reg key OLEDBTimeout.
about this key you can read from microsoft
support
good luck

EF ProviderManifestToken issue when updating ODAC Beta 3 to final release

Hi everybody,
We're using ODAC (connecting to a Oracle 9i) with VS2010, developing with .NET Framework 4 using Entity Framework. We started our developments using ODAC Beta 1, and we have been updating the ODAC every time that a new Beta was released and everything was going like expected, but we're having trouble with the last update, from ODAC Beta 3 to the final release (11.2.0.3). Note that we have only one ODAC installed at the time, for every update we first uninstall the old release, then we install the new ones and finally we update the application references to the new Oracle.DataAccess.dll.
The first error occurred when the application attempt to access the DB, the message we got was: "+ProviderManifestToken no es válido+" ("*ProviderManifestToken is not valid*") .
We tried updating the model (EDMX) from the database (the only change made was an update in the EDMX SSDL content from ProviderManifestToken="9i" to ProviderManifestToken="9.2"), then another error came out: "+El esquema especificado no es válido. Errores: Modelo.ssdl (2,93) : error 0169: Los artefactos SSDL deben tener como destino el mismo proveedor. ProviderManifestToken '9i' es diferente de '9.2' que se encontró antes.+" (something like "*The specified schema is not valid. All SSDL artifacts must target the same provider. The ProviderManifestToken '9i' is different from '9.2' that was encountered earlier.*"). We did some research about this error, but couldn’t find any solution... does anyone know how the update from Beta 3 to Final Release should be done? are we missing any configuration?
Thanks in advance!
Lucas

ODAC Beta 3 (11.2.0.2.50) starts to use two most-significant digits of an Oracle database version number for ProviderManifestToken.
You have no problem with ODAC Beta 3 by modifying '9i' to '9.2' for ProviderManifestToken. But when updating ODAC Beta 3 to final release (11.2.0.3) and doing the same modifications, the said "another error" occurs. That seems to indicate the issue is not about ProviderManifestToken itself.
I am wondering if there are different store schemas in your edmx file and the error is caused by schema filtering.
For example, having differnet store schemas for the Schema= like below.
<EntitySet Name="Categories" EntityType="Model.Store.Categories" store:Type="Tables" Schema="USER1" />
<EntitySet Name="Customers" EntityType="Model.Store.Customers" store:Type="Tables" Schema="USER2" />
Can you please check it?
Another question is: Can you regenerate the edmx file using the final release (11.2.0.3)?
This is the preferable way.
Edited by: shsu on Mar 1, 2012 12:32 PM

Space issues when updating Infinity Blade

Hey all,
I've got Infinity Blade, and it's a big app (891MB). When I go to update it, the Infinity Blade icon had a blue bar fill up until it gets to "Installing" then it says it can't do it, I don't have enough space. Now I've got 1.3 GB of space left on my iPad, so even if it was downloading a full new copy there should be enough space left. What's the deal here?
Any input appreciated, Thanks,
Dan Perkins

That's a shame... I often run into the issue when I'm at work and (being impatient) I really want to update and app now. Unfortunately, I've got the 16gb and it's almost ALL apps taking up the space, as opposed to videos. So I can't delete apps and reinstall because I'll lose their data. And I have very little music. I do have a fair bit of family pics but I'd have to go through and delete a bunch 1 by 1.
Maybe it is time that I start letting go of some of these apps that are cool but I'm REALLY not ever going to use them / play them again
Thanks for the input.
dp

Issue when updating a trigger

I have a trigger that is supposed to insert when a button is pressed and update when a different button is pressed. When inserting, everything works but when updating, UPDATED_ON and UPDATED_BY is put in the database but VOIDED_BY,VOIDED_ON,ARCHIVED_BY,ARCHIVED_ON are not. I am not sure what i need to do in order to fix this. Can anyone help me out here? Thanks
Deanna
create or replace trigger "CHART_BEFINSUPD"
BEFORE
insert or update or delete on "CHART"
for each row
DECLARE
v_VOIDED_ON number;
v_UPDATED_ON number;
v_ARCHIVED_ON number;
begin
--v_voided_on :=0;
--v_updated_on :=0;
--v_archived_on :=0;
IF INSERTING AND :NEW.RECNUM IS NULL THEN
SELECT CHART_SEQ.NEXTVAL INTO :NEW.RECNUM FROM DUAL;
END IF;
IF INSERTING THEN
:NEW.CREATED_BY := NVL(V('APP_USER'),USER);
:NEW.CREATED_ON := SYSDATE;
:NEW.STARTED_ON := SYSDATE;
:NEW.STARTED_BY := NVL(V('APP_USER'),USER);
--:NEW.ARCHIVED_BY := NVL(V('APP_USER'),USER);
--:NEW.ARCHIVED_ON := SYSDATE;
END IF;
if UPDATING THEN
:NEW.UPDATED_BY := NVL(V('APP_USER'),USER);
:NEW.UPDATED_ON := SYSDATE;
END IF;
if VOIDED='Y' THEN
:NEW.VOIDED_BY := NVL(V('APP_USER'),USER);
:NEW.VOIDED_ON := SYSDATE;
else
:NEW.ARCHIVED_BY := NVL(V('APP_USER'),USER);
:NEW.ARCHIVED_ON := SYSDATE;
END IF;
end;

ok, I decided to take out of the trigger the code about archiving, since that is the part that seems to be giving me the most trouble. The rest of the trigger now works.
So could i just write a procedure for just the archiving part? And if so how would that be done so that the procedure would run on a click of a button?
create or replace trigger "CHART_BEFINSUPD"
BEFORE
insert or update or delete on "CHART"
for each row
begin
IF INSERTING AND :NEW.RECNUM IS NULL THEN
SELECT CHART_SEQ.NEXTVAL INTO :NEW.RECNUM FROM DUAL;
END IF;
IF INSERTING THEN
:NEW.CREATED_BY := NVL(V('APP_USER'),USER);
:NEW.CREATED_ON := SYSDATE;
:NEW.STARTED_ON := SYSDATE;
:NEW.STARTED_BY := NVL(V('APP_USER'),USER);
END IF;
if UPDATING THEN
:NEW.UPDATED_BY := NVL(V('APP_USER'),USER);
:NEW.UPDATED_ON := SYSDATE;
END IF;
if updating and :new.voided='Y' then
:NEW.VOIDED_BY := NVL(V('APP_USER'),USER);
:NEW.VOIDED_ON := SYSDATE;
END IF;
--IF UPDATING AND :new.ARCHIVED_BY IS not NULL THEN
--:new.ARCHIVE :='Y';
--:NEW.ARCHIVED_BY := NVL(V('APP_USER'),USER);
--:NEW.ARCHIVED_ON := SYSDATE;
--end if;
--if updating and :new.archived_by is null then
--:new.archive :='N';
--if v_archive > 0 then
--:new.archived_by := null;
--:new.archived_on := null;
--end if;
--end if;
END;Edited by: Dclipse03 on Oct 7, 2009 6:57 AM

Pacman issues when updating/installing

I have done a few new Arch installs in Virtualbox over the past week or so. Each time I have alot of issues using pacman, and I never have before. There are two things that seem to be happening:
1. At least every other time I use pacman to install and/or upgrade anything I get a package is corrupted error. I have tried using multiple different mirrors and it happens with each one. I have also tried reinstalling pacman with the same result.
2. The second issue is pacman will just stop mid-upgrade/install. One example of this is when installing xorg. It was halfway through installing and just stopped at 55% on one of the files it was downloading. This has happened numerous times in the past week. Again, I have tried numerous pacman mirrors (all in the US) and reinstalling pacman, neither solved the problem.
Anyone else seen anything similar?
I know this is a KDEmod mirror but I am having the same issue right now when I am trying to download KDEmod 4.2 from the US mirror. Pacman will just stop mid-download and I have to remove the db.lck on pacman then restart my KDEmod download. I have done it at least 5 times already and it isn't even half way downloaded.
Last edited by JawsThemeSwimming428 (2009-02-18 22:57:39)

Thanks for the replies. I am running the Arch install in question in Virtualbox and the host is not having the issue. The host is Windows Vista and I suspected it to be a network issue originally, however when the VM Arch install was having an issue my Vista machine (host) still was able to browse the web. Not sure what else to try?
Just happened again while trying to install Firefox. While it froze at 93% on xulrunner I ran a continuous ping from the Vista host and not a single packet was lost. Pacman never finished downloading the file, just stayed at 93% until I killed the job. I had to remove the db.lck on pacman and redo the download (pacman does pick up right from where it left off). Any thoughts?
Last edited by JawsThemeSwimming428 (2009-02-20 03:24:44)

Startroutine issue when updating transactional DSO from parallel process

Hi
I have the following issue.
In a start routine i do some processing of data. In some cases errors missing master data creates a potiential error but does not stop the processing. What i want to achieve is the following.
I have created a transactional DSO where i want to update information about the records where issues is found in processing. I use a standard ABAP modify statement to update the DSO. This works fine when i run the DTP in 1 batch process but i get errors when i run the DTP in parallel. The problem is related to the database locking of the DSO table. I have tried to play around with ENQUEUE but cant get it right.
Any input to get this to work in parallel would be appreciated.
/Chris

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Windows Vista Network Issues when updating Podcasts

Hi there,
Since upgrading to VISTA i am experiencing countless problems with my internet connection when using iTunes. Using iTunes normally does not cause a problem however as soon as iTunes store downloads updated podcasts, my network connection disconnects. The podcasts only download partially and then fail as a result of my network issues. I am unable to repair my wireless network connection at this point and it appears that my wireless card disables completely. I have to reboot to resolve the issue.
Has anyone else experienced this? I am using the latest version of iTunes.
Are there any fixes?
Many thanks,

Try turning off firewalls, pop-up blockers, software accelerators, and security software.
Can you connect with everything temporarily turned off?

Issues when updating 3GS to iOS 4.3

Hi,
My wife has a 3GS and has been trying for days to update to the latest version of iOS (4.3), always having an issue at the end.
First iTunes gave the message about the software upgrade, so she clicked download and install. After some time, she got an error message (Error 3259), so it seemed that the file was not being downloaded properly.
After several tries, she downloaded some software to repair the error, and it seems it worked. Also as a second alternative she downloaded manually the iOS file.
Now the problem is that she connects the 3GS to the computer, iTunes detects it, does the backup / sync and then proceeds to install the iOS upgrade, taking more than 10 minutes, and when it seems to have finished the process she gets a message saying that the connection between the laptop and the iphone was lost, and the software was not installed. We have tried a few times always having the same error at the end.
She is using a Dell computer with Windows XP and the latest version of iTunes.
Any help will be highly appreciated.
Regards
Jose

Hi Wjosten,
Thanks for your suggestion. I did as you suggested and it partially worked.
I had to update to the latest version of iTunes. Then I disabled all security software and tried to update the iphone. It seemed to work but agained it failed. Now I get an error 1604, and need to restore the iphone. I restarted the computer, tried again, and got the same error again.
Now, not only I cannot update the iphone, but also have to deal with the fact that I need to restore, and it's not working.
Now I am going through the process of checking the USB settings, restarting (again) the computer and trying all over again.
Any ideas or suggestions will be more than welcome.
Regards
Jose

Issue when updating Creative Cloud Desktop

When I try to update the Creative Cloud Desktop I get the following message:
"We've encountered the following issues: Creative Cloud desktop failed to install"
What do I need to do?

Hi,
I'm having the same problem but haven't found anything that solves it on the existing posts.
I've just bought a brand new Macbook Pro 15" and transferred ALL my data from my old Macbook Pro 17" using my Time Machine. Both Macs are running Mavericks but Illustrator doesn't function properly. Obviously I need to use Crative Cloud Desktop to reinstall Illustrator but every time I attempt to install I get the same message... "We've encountered the following issues: Creative Cloud desktop failed to install". Oh and I have a Creative Team subscription.
Please don't just point me in the direction of the other threads on here. I've either tried them or don;t follow them because what they describe doesn't appear at my end.
Cheers
Simon

Having issues when updating products

Hey Guys,
The following error occurs when I try to update Adobe Products:
Flash Pro CS6 update 2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Photoshop 13.0.1.1
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Bridge CS6 5.0.1.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Adobe Media Encoder CS6 6.0.3 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Robert Beauchamp

see if these give you further help:
http://adobe.hosted.jivesoftware.com/message/4518817
http://forums.adobe.com/message/5048225

Password change issue when updating user data in SAP ABAP system

Hi Guru's,
One of my reconciliation tasks part of the reconciliation job I've created is doing some strange password updates.
As you can see below the task selects all users part of my identity store that are part of the account attribute of the particular ABAP system.
Once these users are selected the task updates different data like username, validto, ... but the task is updating a lot of other things that are not part of the destination tab. What is causing the biggest issue is the password fields that are updated in the ABAP system like, password, productive password, ...
Can you please advise if I missed something and how to solve?
Thanks a lot,
Laurent

Hello Steffi,
Yes in the ABAP systems they have the same timestamp. No other jobs are running at the same time.
It is only happening to a few users depending on the ABAP system. On some ABAP systems there are only a few users for which the PW is reset and other systems 300.
Example below of a system where I updated all user. In my pass only the following attributes should have been pushed thru to the ABAP system.
However the valid from, accounting number and password have been updated as well.
Thx,
Laurent

What was biggest issue when updating from Logic 6 to Logic 7?

I'm switching this week by purchasing update (Logic 6 to 7). Was everything seamless? Will all my Sampletank plugs work fine? Will I have to re-authorize all non logic plug-ins (sampletank, Soundsoap, etc). Do garageband instruments and loops transfer auomatically? Will all current Logic preferences carry over to Logic 7? Please tell experiences on actual update. How does XS key get updated?

hi dale, yes everybody's had issues - we're just too bored and tired with the whole buggy mess to respond. just read some of the messages by rohan, armag.,ishwartz and stash to get the picture.
if it works great already, keep it going and add the upgrades cautiously.
stick the new stuff on its own drive and thrash it, day in day out, until you trust it. don't leave yourself without a back door (os9 is mine).
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

[solved] Issue about update with pacman -Syu

Everytime I update my system I get these questions. I always answer no, because I'm afraid to screw up everything. The questions are
replace iwlwifi with core/kernel26?
replace rt2x00-cvs with core/kernel26?
replace slocate with core/mlocate?
What should I do, why pacman is asking me this, and what is slocate, mlocate, rt2x00-cvs iwlwifi, core/kernel26?
Thanks a lot, I'm a newbie! I've searched for that in forum and in google, and all what I got was japanese pages, and a thing that has nothing to do with that.
Alexandre
edit: solved! thankyou!!!
Last edited by malkosta (2008-10-12 14:57:49)

replace iwlwifi with core/kernel26? => that's because the Intel wireless driver iwlwifi was included in the linux kernel, so you don't need it anymore.
replace rt2x00-cvs with core/kernel26? => about the same thing I think.
replace slocate with core/mlocate? => the arch devs decided to change the version of locate (a command to search files) in core.
Edit : bender02 was faster than me.
Last edited by catwell (2008-10-12 12:50:09)

Dhcpcd issues when updating my pacman

Similar Messages

Maybe you are looking for