Dialog Step In Waiting Status: Execution Interrupted

Hi Frds,
I have existing WF. Its work fine in development System . But in Quality system Dialog Step stuck in Waiting Status. The Log Message is 'Execution interrupted' .
Note: Requested Start is taken care also executed T-code SWU_OBUF.
Please advice.
Thanks
Imran

Hi Modak,
I dont find any error in the log . Please find the screenshot.
Thanks
Imran

Similar Messages

Execution interrupted msg in workflow first step

Hi all,
Am getting a Message (in the message text tab) in workflow log (detail section). The very first step of workflow is an activity to "instantiate employee" details. Its been used in mostly all workflows. It was working fine in development. But now in quality, everyone workflow is in "ready" state at first step and in the msg tab, am getting a msg stated : "Execution interrupted". Could anyone tell me what could be the reason for the same?
Thanks in advance.

Hi,
I am slso getting the same error message " Execution Interrupted SWF 611 " while executing standard workflow .
Kindly guide me to resolve this . What type of customizing should be maintained in SWU3 to overcome this error .
Thanks and Regards,
S.Sivakumar

HT1688 I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?

I'm trying to download a audiobook I got this morning with iTunes. However, the book is frozen on "waiting" status, what is the audiobook "waiting" for?

Hello Jose,
I would be concerned too if the audiobook I purchased from iTunes was not downloading on my iPhone. I have a few suggestions to get it downloaded to your iPhone.
First, I recommend checking to see if the download was interrupted:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If the audiobook still does not download, I recommend signing out and back into the iTunes Store on your iPhone:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
The last step states to sign in with another account, but for the situation you described, I recommend just signing in with your same Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
If you are still not able to download the audiobook, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best,
Sheila M.

How to re-start the workflow for Shopping carts in WAITING status

Hi
We are using 1-step approval work flow, and we get some strange issue. We can add approver in the workflow, but after we click order button and back to check status again, sometimes there will be "Ad-hoc agent not found" issue. Do you know how to solve?
And one workaround for user is to re-add the approval, and sometimes the shopping cart back to normal. But sometimes, after we add the approver, the shopping cart are in waiting status:
Workflow Item:
Workitem-ID 000000714642
Task WS10000276
Text One-Step Approval: Value limit: Shopping Cart
1000114698
Status WAITING
Statustext Waiting
Date 13.06.2008
Time 10:41:22
So may I ask how to re-trigger the workflow?

Hi,
Thx for that. I need to trigger the Approval workflow to go the the approval manager.
Can u give me the document on this? thx, kerry.liu [at] ap.effem.com.
Thx very much
Kerry

Work flow in waiting status

Hi,
we are using N step PO work flow for chagning the purchase orders.
when the PO is changed and ordered workflow is going into WAITING status.
It is not triggering the next steps at all.
Could any one suggest how to proceed further?
Thanks,
Naresh

Hi Daniel,
It's wokring fine for all the PO'S.
For only one specific PO we are facing this problem.
Even If I try to change the same PO again it gives an error
'Document being processed in background; try again later'
Please suggest.
Thanks,
Naresh

Purchase Order Workflow - dialog step not receiving terminating event

Hi,
We have a scenario wherein based on the release groups and release strategies, different peope need to release the PO's.
I have been able to develop the workflow for this successfully, but here is where I am facing an issue.
After the PO has been created, based on the release group and strategy, it gets routed to the appropriate 1st approver. On their approval, the PO gets routed to the 2nd approver. Once the 2nd approver approves, the dialog step doesnt get completed and is still waiting for the terminating event. Event trace shows that the event is getting published, but there is no workitem to receive the terminating event. I am not sure why this is occuring for only 2nd approver onwards whereas for the 1st approver, the terminating event is received by the workitem.
I am using start conditions for my workflow to ensure only 1 instance of the workflow is triggered for a rel groups and rel strategy and release code, else I am multiple instances each time an approver approves the PO. I am not sure if the start conditions are causing this issue with the terminating events not being received with the workitems.
Any assistance is welcome.
Thank you,
Satish

From the information provoided it seems you are using PO that is subjected to Release of PO for multiple Release Code and each Release Code Release is being done by one approver. If that is the case then I think the Terminating event should get caught. Please check whether the Terminating event that is getting triggered is specific to the Release Code or not.
Thanks
Arghadip

BPM with waiting status in MONI

hi forum ...
in a fille to file scenario...with BPM.....
there are two receivers and 1 send step....
its like receiver1-->receiver2----->send1
when the scenario runs.......it receives a particular message for "receive2".....which i cant provide right now.......so the sxmb_moni shows a waiting status .....means a clock like signal......
how can i stop the BPM instance in waiting loop
is there any time out after which the BPM instance ll stop automatically

<<you have configured a terminating event>>
but i cant provide that condition due to some reasons......
<<SWIA to complete the workflow manually>>
how to do that...can u elaborate

Work item is in WAITING status

Hi All,
from the past 2 months we are getting so many work items in waiting status in our system. We are able to see different work flow work items in 'WAITING' status.
What would be reason to be in waiting status.
All this work items are having message as ' Work item submitted for execution' in log but it is not reaching agents inbox for approval.
Is SAP Note 962488 will help me in this issue.
Regards,
Kusuma K.

Hi ,
There can be some event which is either inactive or incomplete, check for them in the Log and do the needul.
Hope it shd help.
DP

Dowload app from app store stay in wait status

Since i update to ios 5.0.1 on my ipad2 everytime if i want to download apps form the app store the status of the downlaod proces stays in "wait" status and the app will not be installed.

Hi fredfromroosendaal,
You can try do a soft reset by pressing the home and power together for around 10-15 secs and wait it reboot.
After that try download again and it should solve the problem.
I face this before and get it done by doing step above.
Hope this works for you too.

SRM PO Workflow (BADI Type) in waiting status

Hi all,
I am in SRM extended classic scenario. After shopping cart gets created, it gets automatically approved and PO is created. Then PO workflow is triggered for approval. This happens fine in development box. However when its been transported in quality, the PO workflow remains in 'Waiting Status'. The requested start date has been set to future date 31.12.9999. Thus the workflow does not start properly. If gets stuck with the first step. It does not go upto the approval step.
Is there anyone who can tell me why this is happening and what is the remedy?
Regards
Dip

Hi Dipankar,
Is it required to set the requested start date to future date 31.12.9999?
Also check if the same has been maintained in development system.
I think this might be restricting the workflow to proceed. Please check the relevance of this deadline monitoring.
Regards,
Saumya

WF with OO - dialog step issue

Hi folks.
I'm on ECC 6.0. My Zwf works with a Zclass. There is a dialog step that user receive in workplace ans can execute. BUT this WI terminates even user do nothing.
I'd like the WI get out its inbox ONLY if hin/her does the correct action in SAP document.
This step is configured with a method of a Zclass that calls a transaction.
I tryied configurations like explained in others posts, but without sucess.
I followed this explanation ( ABAP OO Method, you can select it as "Background Processing" else it will be a "Dialog Process) but it doesn't work. The WI always gets out of users workplace inbox. I want it to stay there while user did nothing in document.
Thanks.
Glauco

When a method completes execution it is finished and workflow moves on.
If you want to control when it is considered complete, you can either:
- Use "Confirm end of Processing" on the task
- Raise an exception CX_BO_CANCELLED or a subtype thereof in your method (this does not set the item into error)
- Use a condition on the WF step if there is something you can check
- Make it asynchronous with a terminating event
The first two options are the easiest to implement.
Hope that helps,
Mike

Work item in waiting status incase of multiple approvers

Hi Experts,
We have a scenrio where in the work item needs to be sent to multiple approvers.
We have multi line container element which contains all the approvers. We have assined this container element using the expression option for the agent .
we have made the task as general task and we do not have any requested start maintained for this work item.
However we are facing a problem. Work item is always in waiting status. What might be the issue? In our case when i check the work flow log, for these work items there are three approvers, however SBWP inbox is appearing only for one approver and remaining two approvers do not have any Icon against their name.
I have checked the approvers ID's and all of them are active in the system.
Can you please help me to resolve this issue?
Regards,
Madhu

Hello,
I would look at the workitem in SWIA, proceed as if you were going to change the container elements (ie click on the workitem number, Edit > Change) and see what options are available to you.
"Resubmit: You can have a work item resubmitted to you for processing at a later date. To do this, choose Resubmit and then enter the date on which you want to receive the work item."
Let us know what you find.
Edited to add: I tried it myself, a "End resubmission" button appears when you click on the Waiting step in the workflow log.
regards
Rick Bakker
hanabi technology

Work item struck in 'Waiting Status'.

HI All,
I have a problem with SRM custom workflows for PO and Invoice approval. Work flow has started but stuck in the status "waiting" at the first step 00002 "Parallel Section Between Approval "
I've checked SWPC (continue workflows after crash) and SM58 (RFC connections), but its not in either.
Can any one tell why work items are going into waiting status?
Its very Urgent.
Thanks,
Shiva

Hi,
Sorry, I'm not familiar with SRM related matters. Can I just check with you if the task in the workflow is an 'Wait for Status Change' kind of activity? E.g. WS12300111 (ECC 6 Leave workflow).
If so, you may want to simulate in your test server, and run program RSWWCOND to see if the workflow will continue. Not too sure if this will help you.
Regards,
Damien

Manually create WT in "Waiting" Status.

Dear Experts,
Is there a way we can create some kind of "Planned" warehouse tasks like we have WTs created in "Waiting"?
We cannot use POSC for this. But we would like the Warehouse Tasks to be created in "Waiting" Status.
These are required for TUs. So, the idea is to convert all these "Waiting" tasks in to "Active" tasks upon TU Arrival.
Regards,
Shashidhar

Hi Shashidhar
This can be achieved by other way.
Do not activate IDN >>
So when you arrive TU u activate TU and make auto WT creation.So as you activate IDN system will automatic create WT for unload/or WT for putaway in open status to move forward.
why you do not want to use POSC... you can create two step POSC.
unload and putaway.
Regards
Suraj

Dialog step

hello,
Do u know Dialog step ?
Thank you.

A dialog step from a program is assigned to a single work process for execution.
The individual dialog steps of a program can be executed on different work processes, and the program context must be addressed for each new work process.
A work process can execute dialog steps of different programs from different users.
a work process must open a separate datables LUW for each dialog step. The work process sends a commit command (database commit) to the database at the end of each dialog step in which it makes database changes. These commit commands are called implicit database commits, since they are not explicitly written into the application program.
Have a look at below link for details:
[Application Servers|http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2e8a358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

Dialog Step In Waiting Status: Execution Interrupted

Similar Messages

Maybe you are looking for