Dialogue failure from ICM Router send 404

Hi,
It is a fresh installation of ucce 9.0(3) with CVP 9.0
I am using sip comprehensive model (without SIP proxy).
After I have finished the installation, all the pims are active and the same for the call server and vxml server.
For some reason, the call is reaching the icm script then disconnected.
the logs collected from the Call server:
2202: 10.15.19.21: Jun 11 2013 03:20:54.544 +0300: %CVP_9_0_Infrastructure-2-HEARTBEATS_STOPPED: Heartbeats from RPT1 stopped. Unilaterally setting state to PARTIAL_SERVICE. Sending update. [id:1011]
159: 10.15.19.21: Jun 11 2013 11:33:28.567 +0300: %CVP_9_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 8041B895D8E0611B41004501C0A879C3 LEGID = 6CD52037-D1A811E2-B9BB90EF-14EB87BB - [INBOUND] - DIALOGUE_FAILURE from ICM Router sends 404 rejection to call. errorcode=5 [id:5004]
162: 10.15.19.21: Jun 11 2013 11:33:28.567 +0300: %CVP_9_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 8041B895D8E0611B41004501C0A879C3 LEGID = 6CD52037-D1A811E2-B9BB90EF-14EB87BB - [INBOUND] - ABNORMALLY ENDING - SIP code [404], Reason Hdr [SIP;cause=404] Not Found, GW call using SURV TCL flag [false], NON NORMAL flag [true], DNIS [8555], ANI [8038] with AGE (msecs) 47 and Call History : [id:5004]
Thanks in advance,
George

Please attach the complete rtr and call servr logs.
Also check
PG Explorer - CUCM PIM Advanced - Network VRU - NONE
PG Explorer - CVP PIM Advanced - Network VRU - Type 10 your CVP

Similar Messages

How to check the success/failure of e-mail sending from Sharepoint?

Dear Expert,
I connect Exchange 2010 and SharePoint 2010. When user create workflow in sharepoint, it will send the email to confirm. if it's done. but I checked from user they didn't get the email. I would like to know how to check the success/failure of e-mail
sending from Sharepoint?
Thank you

By default, there is no logging mechanism in SharePoint for outgoing mails.
Mails in SharePoint are sent by giving an SMTP sever IP address in Central Administration. SharePoint never sends email directly. It relays or routes mails to the SMTP server. So, logging should be done in the SMTP server itself.
There is also another way of doing it. You can enable SMTP service of IIS for sending emails from SharePoint, which would also just relay the mails to an SMTP Server. But in this case, you can enable logging in your IIS SMTP Service. Please visit this blog
for more details.
In your case you need to check your exchange server for any failure for relaying mails.
Regards, Vikas Patel

Routing messages from a specific sender to a folder in Mail

Can I have Mail messages from a specific sender sent or copied to a dedicated folder automatically?
Thanks.

Hi Edward,
Thanks for visiting Apple Support Communities.
You can use rules in Mail to do exactly that. See this article for more information:
Mail (Mountain Lion): Manage messages using rules
http://support.apple.com/kb/PH11738
Regards,
Jeremy

Received response from host (router IP address) with invalid source port 32784

I replaced my old wireless router with a Cisco Linksys E4200, running firmware version 1.0.02 build 13 May 24, 2011. About once a minute the router sends an unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb with a destination IP address of 224.0.0.251. The unsolicited message is a DNS response with source port 32784, transaction ID 0, flags 0x8400 (standard query response, no error), questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. The two answers both relate to the router itself: one has Name Cisco18738.local, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router. The other is the reverse of the same address. The additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address).
When my desktop computer receives these messages it logs an error, for example: "Jun 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0'" The 10.146.9.1 is the router's IP address. I also see these messages on the wireless link from my laptop.
I suppose the E4200 is generating these DNS messages in a misguided attempt to make sure there is no old information about its name. Is there a way to turn them off? If not, is there a way to report this to Cisco as a bug?
Solved!
Go to Solution.

gv wrote:
1. To contact Linksys, call support.
2. From the internet draft: "Multicast DNS implementations MUST
silently ignore any Multicast DNS Responses they receive where the
source UDP port is not 5353." Your avahi-daemon does not comply with this draft.
Thank you for the reference. For the sake of others who may read this thread, the current draft of multicast DNS is at http://www.ietf.org/id/draft-cheshire-dnsext-multicastdns-14.txt.
Here is the whole paragraph from which you quoted, from section 6 (Responding): "The source UDP port in all Multicast DNS Responses MUST be 5353 (the well-known port assigned to mDNS). Multicast DNS implementations MUST silently ignore any Multicast DNS Responses they receive where the source UDP port is not 5353."
Thus, it appears that there are two errors here: the Cisco E4200 is not using 5353 as the source port, and the logger is not silently ignoring it.
The message appears to be an announcement rather than an actual response to a query. In section 8.3 (Announcing) I found this paragraph: "A Multicast DNS Responder MUST NOT send announcements in the absence of information that its network connectivity may have changed in some relevant way. In particular, a Multicast DNS Responder MUST NOT send regular periodic announcements as a matter of course." Thus, it appears that there are three errors here.

ICM Router & Logger Private Network connectivity

Hi,
Can any one give me clarification on the following
Is there any private network connectivity betwen ICM router and Logger ?

No, call routers (central controller) communicates between side A and B over private network for synchronization, so do PG pairs. Loggers receive data from local call router over public traffic.
Chris

It is possible ssh from a router to another, to its ipv6 link-local address?

Hi
R1 and R2 are connected by serial links, with IPV6 address global unicast and link-local every link.
I can do ping between them. When I do ping to link-local address next router, I need to specify outgoing interface, ping is succesful.
However I can not do SSH v2 from a router to another to its link-local address.
OS R1 and R2: c2900-universalk9-mz.SPA.151-1.M4.bin
R1
Serial0/3/0 [up/up]
FE80::1
2001:1200:CAFE:BEBA::1
R2
Serial0/3/0 [up/up]
FE80::2
2001:1200:CAFE:BEBA::2
Thank you

Hi Cesar,
you should be able to use "%source_itf" at the end of the target IPv6 LL address.
Example with telnet :
R1#ping FE80::302
Output Interface: Ethernet0/0
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to FE80::302, timeout is 2 seconds:
Packet sent with a source address of FE80::301%Ethernet0/0
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms
R1#telnet FE80::302%Ethernet0/0
Trying FE80::302 ... Open
Password required, but none set
[Connection to FE80::302%Ethernet0/0 closed by foreign host]
R1#

My wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting etc, doesn't help

my wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting, etc, doesn't help!
any suggestions?
jonathan

neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself. with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background. that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox

Sep 02 20:31:01    Severity:4    DHCP Client lease rejected from IPv4 router addr , MAC addr

Problem:
Time Capsule kept loosing connectivity from internet modem. ISP has no records of outages.
Logs:
Sep 02 20:31:01    Severity:4    DHCP Client lease rejected from IPv4 <router addr>, MAC <addr>
Resolution:
Make sure you TC is not connected to the same coax cable that the cable box is connected to.
Although, the system may work just fine for quite some time, eventually service will be disrupted by some device attempting to connect over and over.
For some reason, Time Capsule doesn't perform well when a device attempts to authenticate over and over, even if they device clearly isn't part of the Access Control List or even have the correct password.
So, in this case the the offending mac address was Scientific Atlanta Device, which was my cable box.
Regards!

I have seen the same issue with my iOS and Mac OS devices (iPhone and MacBook Pro). I have written my own DHCP server (http://notebook.kulchenko.com/embedded/dhcp-and-dns-servers-with-arduino) and have had troubles getting my devices to connect (Windows Vista and Ubuntu devices connect fine). I suspect that this problem happens because the DHCP Offer message is sent to a broadcast address, even though (at least in my case) the broadcast flag is off in the DHCP Discover message I see.
Unfortunately you didn't include the Discover message, so I can't tell for sure, but if it indeed has the broadcast flag set to 0, then the server should send the response message using unicast as per DHCP spec (http://www.ietf.org/rfc/rfc2131.txt, section 4.1):
If the broadcast bit is not set and 'giaddr' is zero and
   'ciaddr' is zero, then the server unicasts DHCPOFFER and DHCPACK
   messages to the client's hardware address and 'yiaddr' address.
So, it seems like in this case the server may be at fault, even though it would be nice for Mac OS to accept broadcast responses (and would solve my problem too).
Can someone confirm that Mac OS does not accept broadcast responses to DHCP Discover and DHCP Request messages? Thanks.
Paul.

My iPad 4 needs to be right beside my router to get 3 bars. When I walk 15 feet away from my router, I get 1 bar with terrible download and upload speed.

I get no connection from being away 20 feet from the router, my iPod 5 gets 2 straight bars but my iPad 4 gets no connection and it:s right beside my iPod 5 too. what the ****??! I got a iPad 4 running iOS 7.0.4. I charged it and it"s acting wonky. I reset network settings and that didn't work at all. any other ways Apple nerds?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How to Change Your iPhone’s (iPad’s) DNS Servers
http://www.macinstruct.com/node/558
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Not able to ssh out from a router

Hi All:
I notices i can't not ssh out to another device from my router.
SSH in from my client (putty) works fine.
and not access-list attached to vty with out direction.
transport output all
I found this problem happened on my ASR1002 with "asr1000rp1-adventerprisek9.03.03.01.S.151-2.S1.bin" and my 2921 router with "c2900-universalk9-mz.SPA.151-4.M2.bin", but it works fine on 7200 with "c7200-advipservicesk9-mz.151-4.M.bin". and my old router 28/18 with 12.4 ios work fine as well.
The symptom is:
BMP-2921-R01#ssh -l jason 1.1.1.1
% Connections to that host not permitted from this terminal
any idea? please help me out
thanks

Hi:
Configuration:
ip domain name xxx.com.sg
ip ssh time-out 30
ip ssh authentication-retries 2
access-list 10 remark "SSH Access Restriction"
access-list 10 permit 123.49.101.6
access-list 10 permit 10.168.2.213
access-list 10 permit 10.168.4.219
access-list 10 permit 10.168.4.217
line vty 0 4
session-timeout 15
access-class 10 in
exec-timeout 5 0
privilege level 15
logging synchronous
transport input telnet ssh
transport output all
line vty 5 15
no exec
transport input none

How do I receive multiple texts from the same sender, each individually?

How do I receive multiple texts from the same sender, each individually?

So I receive automated reminders from my job & I want them to come individually. For example, one text -- time stamped 10:14 pm, then another 11:12 am, coming as separate msgs.

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format. Siebel wants to send the data as xml to BI but not sure of the BI capabilities on giving WSDL embedded with XSD (input is a hierarchical)

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

How to read data from a router by using labview

I am a beginner labview. How to read data from a router by using labview ?

What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML.

AFPPRN received a return code of failure from the OSD routine FDUPRN

Hi all,
Operting system : Solaris 9
Oracle application: 11.5.10
i would like to ask query related to buffer area of pinter on solaris server.
we are trying to print cheques using oracle application on network printer.
some times it is printing the cheques with out any problem but sometimes it throws and error message in concurrent request log file.
****************** L O G F I L E C O N T E N T S ***************
Printing output file.
Request ID : 849798
Number of copies : 1
Printer : radch1
Pasta: Error: Error reading input file for type checking.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. An error occurred while AOL tried to spawn the print process
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. An error occurred while AOL tried to spawn the print process.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.
Concurrent request completed
Current system time is 20-AUG-2009 11:49:18
****************** L O G F I L E C O N T E N T S ***************
my question is
1) Do we need to delete any temporary files from server related to printer.
Regards

Hi,
What is the status of those concurrent requests (Completed with Warning or with Error)?
1) Do we need to delete any temporary files from server related to printer.Usually, you do not need to delete any files manually, temp files will be created by the application, and there should no issues with the files permissions (unless you have some other instance running on the same node with different applmgr user). However, you can safely clean (.t and .tmp) files as per the following documents.
Note: 435437.1 - Most Common Solutions to FRM-41839 and .tmp Files Not Being Deleted
Note: 145487.1 - Files Types .t and .temp and .tmp, are Saving Under /var/tmp
Note: 162232.1 - Why Does Oracle Forms Create .TMP Files Which Fill Up The Filesystem e.g. /tmp ?
I would also suggest you search Metalink for APP-FND-00500 and you will get many hits, go through the documents and see if it helps.
Regards,
Hussein

APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN

Hi All,
i have configured a printer in R12.1.3, when i am trying to print its giving below error...
please help..
lp: The printer or class was not found.
Pasta: Error: Print failed. Command=lp -c -dHP_P4014N /apps/local/inst/apps/UAT_server/appltmp/pasta9331_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Thanks
RB

And found this Exception also... in the diagnostic output.
EXCEPTION - One or more versions were missing. caught in 'FNDPastaDiag.retrieveSupportFiles'
java.lang.IllegalArgumentException: One or more versions were missing.
at oracle.apps.jtf.regress.qatool.base.TextUtility.compareVersions(TextUtility.java:650)
at oracle.apps.fnd.diagnose.FNDPastaDiag.retrieveSupportFiles(FNDPastaDiag.java:1486)
at oracle.apps.fnd.diagnose.FNDPastaDiag.runSupportTest(FNDPastaDiag.java:556)
at oracle.apps.jtf.regress.qatool.base.DiagBase.runTest(DiagBase.java:373)
at oracle.apps.fnd.oam.diagnostics.exec.LegacyJavaTestExecution.runTest(LegacyJavaTestExecution.java:147)
at oracle.apps.fnd.oam.diagnostics.exec.LegacyJavaTestExecution.execute(LegacyJavaTestExecution.java:83)
at oracle.apps.fnd.oam.diagnostics.exec.WorkerThread.run(WorkerThread.java:49)
at java.lang.Thread.run(Thread.java:619)
ACTION - Please log an iTAR (Service Request) for product "Support Diagnostics Project" (ID=1332) to notify support about this issue
Thx
RB

Dialogue failure from ICM Router send 404

Similar Messages

Maybe you are looking for