Diaplay classification changes - S_ALR_87012289

Hello experts,
I have a question on the report S_ALR_87012289. The requirement is display the changes to the classification in the vendor master. Though the change documents exist in the vendor master for the classification  but when this report is executed for the vendor (With the check box "General data" checked) the changes to the classification are still not being shown.
is there a way that this can be achived in this report? if not what's the the alternative?
Any feedback will be highly appreciated.
Prakash

Similar Messages

  • Why Material Classification Changes are not shown in MM04?

    I have a material; I changed classification data by changing a value of a
    Characteristic, e.g. unit of measure for reporting. It had allowed values of
    No entry, mg, kg..  I changed it from No entry to mg.
    However when I went to MM04; I do not see the change; why. I know
    When I make changes to non Classification data; I can see changes in mm04.

    Hi,
    I'm afraid you can't see these changes in MM04.                                                                               
    MM04 does not show the changes of classification of the material  master only the changes of fields which directly belong to material master. You can get the classification change docs in the classification screen: menu  Environment -> change docs.                                                                               
    Also note that Changes to the values of characteristics are not recorded in material master changes. These values are stored in the  classification tables and if you want to track changes of them, you have to use engineering change management.
    Thanx & Regards,
    Mauro
    Edited by: Mauro Bianchi on Aug 24, 2010 11:42 AM

  • Vendor Classification Change Log Activate : Configuration Change

    Hi,
    I want to know what is the process of activate Change Log for the Vendor Classification. Please suggest.
    Rgds

    You can see in Xk02 / Xk03 transaction - Environment tab - Field changes..

  • Tax Classification Change in MM17

    Hi,
    we want to change tax classification that defined in Material Master/Sales Org. 1 view from %18 to %8 for all FERT products.
    I execute MM17 tcode and choose MLAN table from list and when i select a material and get into "Data Records to Be changed" i can not get old old values and enter new values.
    how can i make this process ?
    Thanks

    yes, per country..
    but i did not get you where to add fields..i have taken screenshot of my screen where i can not make New Value entry, can not see old value as well.
    http://tinyurl.com/cuv7ls
    once i do this, i will make the same process for all FERT products.
    meanwhile, when i look at Tax Classification table through MM03 its table name is "MG03STEUER" and field name is "TAXKM".

  • Condition Classification - Changed

    Hi All,
    I have created a PO and posting of excise invoice is also done. Now I have changed "TAX CONDITION CLASSIFICATIONS" in SPRO as shown below (tax settings for India)
    I have added the following condition types (AFTER POSTING THE EXCISE INVOICE) in tax condition classification.
    JEX1- ECS setoff condition total
    JHX1 - SHECESS Setoff Condition total
    Now when Im doing MIRO ECS and SHECESS are not being determined. What should we do to redetermine taxes in MIRO.
    Regards
    Ayyallas

    Hi,
    Have you checked with the tax code entered in PO. If not then open the PO got to particular line item details and click on Invoice tab you will find the Tax code written there and infront of the Tax code there is a button called as Taxes now if you find the newly added condition coming there in the screen coming next by clicking on Tax button or not ?, but i am sure it was not there bcz you created the new condition types after creating the PO & GRN and capturing & posting the excise invoice.
    Since you are trying to post the Invoice through MIRO by taking the reference of PO so the system will call only those condition which was avaliable in PO and since you did the chnages  in tax procedure on later on stage that why system is not showing you the newly added condition in Tax procedure and the Tax code which is coming in the MIRO is from PO only. So either you can select a different Tax code at MIRO which is having the value of your newly added condition types(no sure it will work for or you can try this) or you can cancel your GRN then open the PO in change mode and use the applicable tax code which is having the newly added tax conditions.
    So either you can change a Tax code in MIRO level or Mantain the Tax code in FTXP and assign the same in PO after canceling the excise invoice and GRN as well.
    Note: Please give valuable points in order to encourage contributors to answering your quesries.
    Best Regards
    Silky

  • Master recipe- classification- change class type

    Hi Gurus, trying to change the class type in c202, recipe header tab, classification tab, class type to 019. but 018 looks gradeout can not be changed. could you please advise how can we change this setting to 018? thank you.

    Hi,
    its a Config setting go to t code O1CL select the table PLKO & select the Object dialogue structure.
    Its a standard setting be clear with your scenario u r looking fwd..
    Manu

  • Classification change not stored in change number using BAPI_OBJCL_CREATE

    Hello SAP Guru's,
    When using BAPI_OBJCL_CREATE to create classifications and using a change nr in parameters, the object is not recorded in the change nr.
    When you use the transaction CA01, object is well created in change number.
    We use the BAPI in a program and we need the object saved in change nr.
    So if I read table AEOI, I won't find any entry under the change nr. It is the issue.
    Why isn't it recorded?
    Thanks in advance for your help.
    Regards,
    Rudy

    Hello,
    Please try to create a class first for a material-plant-batch as required by you manually.
    After this step, check the key (Field:OBJEK) in table KSSK for the above manually created classification. Pick the OBJEK from the table KSSK and pass the key in the same pattern as that of the value from table KSSK.
    for example in case of Document classification,
    for Doc DRW-1234567890-00-000,
    we have the key (OBJEK) as: <b>DRW1234567890               00000</b>
    Hope this helps.
    Best Regards, Murugesh AS

  • Trigger CREMAS change pointer for vendor classification change in XK02/FK02

    Hi,
    I have a business case where I need to trigger a change pointer of type CREMAS whenever a client modifies vendor classification in transactions FK02/XK02.  I realize classificatiion/characteristics have their own change pointer types (CLFMAS, CHRMAS, etc.), but I was wondering if there was a user exit/BADI available for this scenario where I can manually create a change pointer.  I need the characteristic data to be part of a custom IDoc type (based off of CREMAS03), and it's no problem to include this data in the custom IDoc, but I need a way to trigger the change pointer if the clients changes vendor characteristic data, and nothing else. 
    I also went into transaction BD52 for type CREMAS to see if there's another row for classification (CLASSIFY), but couldn't figure out the right object type.
    There's a BADI called CACL_VALUE_CHANGE that triggers when vendor classification is changed, where I can generate my change pointer, but it's triggered before the client saves which means I would have a useless change pointer. 
    Does anyone have any ideas on what my options are?  I hope I've elaborated enough
    Thanks,
    Chris

    I figured out a way to do this which was to implement the BDCP_BEFORE_WRITE BADI which allows you to interrogate a change pointer based on an IDoc message type before it's saved to the database.  For starters, change pointers for message type CLFMAS must be activated in order for this to work, even though I'm not interested in those eventual IDocs. 
    In the IF_EX_BDCP_BEFORE_WRITE~FILTER_BDCPV_BEFORE_WRITE method of the BADI implementation, I was able to loop through all of the change pointers about to be created and this is where I was able to obtain the vendor number the classification is being applied to.  I actually added another line to the internal table that's changeable in the method for CREMAS and it worked out well.
    The only thing that was difficult was to debug this baby.  No matter how you set the breakpoint, it just never hits it until I discovered it's called using an UPDATE TASK.  I found an unorthodox method to debug this situation on the web which is to force an endless loop before your custom code such as.........
    while sy-subrc <> 98.
    endwhile.
    <custom code here>
    Once your process runs, it will be sitting in an endless loop in an update task which you can view in transaction SM50.  From here, you can highlight this line then you can click on "Program Session > Program > Debugging" to debug your code.  It's not something I was used to, but it allowed me to debug in the end.  I would hope there's better ways, but this worked for now.
    I hope this helps someone else!
    Cheers,
    Chris

  • BADI for PIQST00 - Change in classification

    Hi,
    We want to trigger an update to CRM whenever there is change in classification of student from PIQST00 --> Registration --> Change in Registration --> Updating classification.
    We have tried with following BADI , but it was not successful :
    1) HRPIQ00REG0010
    2) HRPIQ00REG0160
    3) HRPIQ00REG0090
    Could some one provide wih input for enhancing PIQST00 when change in classification
    Regards,
    Jigar Oza.

    Hi Prabhat,
    the reason for update is :
    In CRM z-tables we are maintaining the total number of seats available with regards to program & classification. When student is admitted first time he register for certain program and classification , once student admission is confirmed the total number of available seat in CRM z-tables is reduced by 1.
    Now student has option to request for change of classification, if seats are available. Thus if requested is accpeted for classification change the seats have to be increased by 1 in CRM.
    For better understanding I can explain with example. Suppose student takes an admission for BSc IT course. In Ztables of CRM once student admission is confirmed total number of seats available is reduced by 1. Now student want to change from BSc IT to BSc Electronic. College will transfer to new in SLcM now this should increase total seats available in CRM for BSc IT and reduce 1 seat for BSc Electronic. In SLcM BSc Electronic / IT are configured as classification
    Regards,
    Jigar Oza

  • Change Pointers for Customer Classification

    Hi All,
    I am using Object Class 'DEBITOR' to capture the Customer Classification changes.I am able to see the entries in BDCP but not in CDHDR and CDPOS Whenever i add the classifcation to the customer.
    I need to add these classification changes to my ZDEBMAS Message type thorugh BD52. I am not able to see the 'DEBITOR' Object class to add the classification changes too.I don't find the 'DEBITOR' Object class in the table TBD62 also.
    Can anyone help me how to link the Object class 'DEBITOR'  to capture the classification changes for my Z message type.
    Thanks In Advance.
    Regards,
    Sudha.

    Hi,
    U have to create a object class in SCDO transaction code and then u have generate update program...
    once u do that u can find the list of includes...and then u need to call them in a custom program which will update to CDHDR and CDPOS...
    for example..
    goto SCDO->SPEICFY the object class as MATERIAL and then display, now click on update geneartion program in the aplication tool bar ,  u will find includes there, similarly u have to generate those includes in SCDO. take one include and they put it in se38 and do where used list..u can see how they are used.
    however they will be genrated by SAP only thing u have to do is u need to press that button and press on save button...
    Regards,
    Nagaraj

  • Change Documents for Material Classification data Changes

    Dear Friends,
    We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of the table CDHDR & CDPOS. Please let me know what needs to be done to capture the change documents for a material classification changes in this case.
    Many thanks for you inadvance.
    Beast regards,
    Mallikarjun.

    Change logging of all Classification (including Material Classification) is controlled in the Class type configuration.
    SPRO -> Cross Application Components -> Classification System -> Classes -> Maintain Object types and Class types -> Select Object Table = MARA -> Double Click Class Types under MARA -> Select Class Type 001 and Display -> Check whether "Change Docs" check box is checked on.
    Also check that another flag "Chg. docs for Class" is set on all Objects under the Class type too (by double clicking the Objects folder for a Class type).
    If the Change docs flag is checked on for the relevant Class type and Object then change docs are logged in CDHDR and CDPOS tables for object "CLASSIFY"
    Also the "Change docs" flag cannot be set unless the "Multiple objects allowed" flag is also set in the Class type configuration.
    Please refer [SAP Note 65124 - Classification Change Documents|https://service.sap.com/sap/support/notes/65124]
    Also the above note says and I quote: If "Multiple objects allowed" indicator is not set, start the RCCLUKA2 program. The classification data are converted and the indicator 'Multiple object types allowed' is set. Now you can set the indicator 'Change documents' in Customizing of the class type. However, it only says that change documents are generally possible for this class type. Therefore you have to select objects under 'OBJECTS' for which the change documents are to be written.
    So if the Class type doesn't have "Multiple objects allowed" set (along with Change docs flag not set), there is also a conversion that needs to be run using program RCCLUKA2.
    Also when you transport the configuration to a target system, the program RCCLUKA2 should be run again, refer [Note 379180 - Classification data disappeared|https://service.sap.com/sap/support/notes/379180 ]

  • Attribute Change run taking too long time to complete.

    Hi all,
    Attribute change run has been taking too long time to complete.It has to realign 50 odd aggreagates, some by delta , some by reconstruction. But inspite of all the aggregates it used to finish in quick time earlier. But since last 4-5 days it is taking indefinite time to finish.
    Can anyone please suggest what all reasons may be causing this? and what possibly can be the solution to the problem? It is becoming a big issue. So kindly help with ur advises.
    Promise to reward your answer liberally.
    Regards,
    Pradyut.

    Hi,
    Check with your functional owners in R/3 if there are mass changes/realignments or classification changes are going on regarding master data. e.g. reasigning materials to other material groups. This causes a major realignment in BW for all the aggregates. Otherwise check for parameterchanges / patches or missing db stats with your sap basis team.
    Kind regards, Patrick Rieken.

  • BAdI for BP Change in ISA

    Hi Gurus,
    We are on CRM 4.0.
    We have a requirement where whenever a customer changes his personal details in ISA (B2C scenario), an activity should be generated.
    Can anyone help me with some workaround/ BAdI, to achieve this scenario?
    Reward is gauranteed.
    regards,
    -Yash

    Hi Prabhat,
    the reason for update is :
    In CRM z-tables we are maintaining the total number of seats available with regards to program & classification. When student is admitted first time he register for certain program and classification , once student admission is confirmed the total number of available seat in CRM z-tables is reduced by 1.
    Now student has option to request for change of classification, if seats are available. Thus if requested is accpeted for classification change the seats have to be increased by 1 in CRM.
    For better understanding I can explain with example. Suppose student takes an admission for BSc IT course. In Ztables of CRM once student admission is confirmed total number of seats available is reduced by 1. Now student want to change from BSc IT to BSc Electronic. College will transfer to new in SLcM now this should increase total seats available in CRM for BSc IT and reduce 1 seat for BSc Electronic. In SLcM BSc Electronic / IT are configured as classification
    Regards,
    Jigar Oza

  • Change document required in CL20n

    Hi,
    I have prepared class (002) and assigned in CL20n.
    Now i change the value in CL20n.
    The "change document" or "Change history is not enable in CL20n.
    I want to check the change history / Change document that tell me which value got changed with user ID, time, date.
    Can anyone help me out.
    Thanks,
    Kruti

    Hi Kruti
    The creation of change documents for classification has to be activated for every class type. Go please to the customization of the appropriate class type:
    Cross-Application Components
    -> Classification System
      -> Classes
       -> Maintain Object Types and Class Types
    You will find there a flag to activate change documents.
    As a precondition you'll have to activate the flag 'Multiple objects
    allowed' before. If you already have classified objects
    for this class type these classifications has to be converted before.
    For the conversion of already existing classifications use please report
    RCCLUKA2. It processes the conversion and sets the flag 'Multiple
    objects allowed'. Regard please the documentation of report RCCLUKA2.
    Thereafter you'll be able to activate change documents for this class
    type.
    Please read the 2 notes which explain the process for activating change documents in Classification
    80907 Setting the several objs.for each class type indctr
    65124 Classification Change Documents
    I Hope the information helps
    Enda.

  • Tracking changes in the material master

    Hi All,
    I have a material master 123456.
    In this I have batch_class  023 type. I have a characteristic COLOUR which is assigned to the batch_class.
    For this characteristic there are 2 options RED and BLACK.
    When I created the material master I had assigned RED colour. I did some transaction also.
    After 2 days when I went inside the material master, I found BLACK insteadof RED.
    I want to know who did this changes? I am not able to track this from the mm03--material master changes.
    How do i track the changes?
    Regards,
    Narendra Bora

    in MM04 i think you may not be able to find the classification changes.
    i wouls suggest you to activate change logs on AUSP table a prerequisite of change logs is activating multi object assignments. This entails running program RCCLUKA2 which converts KSSK and AUSP to internal number (more information on the program/procedure can be found in the documentation of the program).
    this can help you to find the change log on the classificaiton values.
    Pravin Mukkawar
    TCS canada

Maybe you are looking for