Did the update yesterday on my 4S. Now when I send a text or Imessage, there is no message sent sound.

I updated my 4S yesterday. Now there is no sound indicating that a text or Imessage was sent. Even when a new message come in. Not the message alert tone, but the sound it makes when you leave a conversation open and a message comes in under that conversation. Best way I can describe it. I have looked through all the setting and have been unable to fix it.

I found the problem. If you set your text alert tone to none. The phone will not make a message sent sound. I set it to Tritone and it started make the sound again.

Similar Messages

  • I got a new iPhone for my cousin and she is using the same the Apple ID as mine and now when I send her text messages to her number, it's sending it to myself and not her. What do I do?

    I am also receiving random text messages from some of her contacts, and she is not getting them. 

    If it's just a text message and not iMessage that is a problem with the service provider.  You should take the iPhone back to the store and explain to them what is going on. 

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

    I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

    Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

  • I just did an update on my ipad and now when it goes to sleep my ipod stops playing.

    I just did an update on my ipad and now when I am listening to my music and the ipad goes to sleep the music stops. 

    KimRoberto wrote:
    My 4s wants to do a restore and not just an update. Help. ...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    KimRoberto wrote:
    I don't want to lose all my contacts and music. I'm ready to cry.
    All this  information should be on the computer you have regularly been Syncing and Backing up to...
    See Restore from Backup here  >  http://support.apple.com/kb/ht1766

  • About a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the scre

    about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.

    i sue windows 7 and my orignal macintosh formated and get online same window

  • I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this

    I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
    <Email Edited By Host>

    You are only as young as you feel......
    This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on only the albums or playlists that you want to sync.
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.

  • When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

    when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

    Hello Todd:
    I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
    Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
    Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
    Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
    Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
    I hope that this works for you, Todd!   ~ Brian

  • HT1657 I rented a movie and now I cannot figure out how to watch it on Apple TV.  We did the update yesterday.  I used to go under the "Movies" tab and click Play.  It has the original options now and when I click "Rent" it says already rented, not downlo

    I rented a movie from ITunes yesterday and now I cannot figure out how to watch it on Apple TV.  I have done this before, and to watch it later on, I would go back under the "Movies" option, find the movie, and there would be a Play option available.  We did the update to Apple TV yesterday.  Now when I go back to the movie, I see the original options. Preview, Rent, Buy, etc.  When I click on Rent again, it says the movie has already been rented but not downloaded. It instructs me to go under Settings/Downloads/Check Downloads, but there is nothing under Settings about Downloads.  I found an option to Check for Rentals, but when I click on that option, it just keeps searching, with no results.  Any ideas?  This worked before the update, even though it took forever to download a movie....

    I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
    SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
    Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

  • HT201210 I did the update on my phone and now it just keeps restarting itself over and over again. It will come up with the black screen and apple sign and shut off and bring that up again. What do I do?

    First I did the update under general like I do every couple months. My phone came up with a screen, at the end of the update, that had a picture of the itunes icon and a picture of the iphone cord like I was supposed to connect to itunes. I did and itunes said that my phone needed to be "restored" to be reusable again, and the only option it gave me was to click the restore button. So I did and it went through a 30 minute restore session. Now my phone just shows the black screen with the apple icon and restarts over and over again. Clicking the buttons does nothing. It has been doing this for hours now. What do I do?

    The screen is telling you to connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • Did the update to Firefox today and now having problems with Comcast

    I did the update to Firefox today. I am able to log into Comcast, but am having trouble with staying logged in. I go to the home page, it tells me I am not logged in, so I go to the log in page, log in, and it takes me back to the home page showing that I am logged in. When I try to go access my email, instead of taking me to that page, it just takes me back to the log in page. It also does this when I navigate anywhere else on the site. Help!

    This can be caused by corrupted cookies.
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

  • Did the update on my iPad. Now I cannot save or share my pictures! Help!!

    I Can only save pictures pre update. But I touched up two pictures and now I cannot share or save them to my ipad. When I try to save it just says processing. And nothing happens.

    I don't know if we are experiencing the same thing. But this is what I wrote in a separate topic concerning sync problems with the update.
    The 1.6 update to the Adobe Photoshop touch app has fixed the crashing issue when trying to sync with the creative cloud.  However, for me all is still not well. After I have worked on a pre-existing file in the Photoshop touch app and synced with the creative cloud, I get an explanation point to the left of the file name and not a check. The blue line goes across the file and it says that the sync is complete in the drop-down menu.  When you check the file in the creative cloud it hasn't synced. In order to get the change made to the file saved to the creative cloud, I have to rename the file. Is this the way the syncing is intended to work after this update? Am I really suppose to rename the file every time I make a change and want to sync to the creative cloud? Am I really supposed to have to archive and then delete the previous files that did not reflect the change in the creative cloud? Would someone from Adobe please respond?

  • HT201413 I have been trying to restore my iphone 4s for 5 hours, please help! The update wouldn't work and now when I connect the iphone it says I have to resore in order to start using itunes but I am getting an error msg. HELP!

    I am trying to update a 4s. The update did not work for some reason. Now I need to restore the iPhone. When I connect the usb to the computer and phone it says I need to restore. So, I click to restore. It starts extracting the software. But I am continually getting the same error message that it cannot complete for unknown error. I have been working on this for 5 and a half hours. I'm tired, mu husband needs his phone and apple support is a joke and of course I can't find any answers anywhere. Please help!

    Hi MB2751,
    As an iPhone user myself, I know it must be very much a problem to have the phone out of service because of an error such as you are seeing. Let's see if we can get you back up and running.
    I would suggest that you troubleshoot using the steps in this article - 
    If you can't update or restore your iPhone, iPad, or iPod touch
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I just did a update on my Iphone 5..now when i send a text message,it repeats back under my phone number..how can i stop this?

    my texts are repeating back to me under my number,why?

    There are multiple reasons why the update failed, unless you can provide an error message/code that came up then nodbody will know.
    Now your iPhone is in recovery mode and will now need to be connected to a computer with iTunes and restored to factory settings. This will install the update at the same time.
    If you have a back up of the iPhone before the issue occurred then after the restore to fqactory settings you can restore the back up to the iPhone. If there was no back up then I'm sorry your data is gone.

  • I did the update yesterday, now I can't even bring it up Why?

    Tried to get back on today , double clicked the Firefox icon, nothing happens. Tried to "download" firefox and tells me to close the Firefox application ??

    You appear to be using IE8 so I guess Firefox is not working at all.
    Look for any Firefox process using Windows Task Manager try keyboard keys all at the same time '''Ctrl + Shift + Esc'''(''was'' ctrl +alt + esc)
    * see detailed instructions in [[Firefox is already running but is not responding]]
    * see also
    **[[firefox hangs]]
    ** [[software update failed]] - (relates to Firefox update)

Maybe you are looking for

  • Max no of lines appear in the back ground job out put

    Dear All, Please help me to solve following query, I am execution ME2N report in background. There are more then 100000 line item in the out put. However only 5000 line appear in the output of background job. Is there any setting in sap, where i can

  • Regular expression does not work in IE

    Hi, I'm having a regular expression which should check the content of an inputText field: it should contain a number, a character and the size should be at least 6. It's working when I test it in FireFox but it always fails to succeed in IE:         

  • How to enhance DEBMDM06 to add custom segments and do mass message transf

    Hi Team, I have a requirement to transfer multiple IDocs(Customers) as a single IDoc to PI (Earlier XI) system. As I know this could be done by doing necessary config in ALE and execute the transaction MDM_CLNT_EXTR(MDMC specific to customer master d

  • What does a Sim card add to the functionality of an iPad mini?

    The suject line is the question!

  • Broadcasting question

    Hello all, I would like to broadcasting some report to our customers. I have two questions: 1. Can I send the report to any valid email address? 2. Is it possible to use ALEREMOTE as the owner when send out the report? How to do that? Thanks!