Didn't restore last session following a foxfire update and install, I need the last session restored, how?

the computer shut down sometime in the middle of the night, maybe a windows update- how knows. There was a foxfire update install pending. When I got to the computer this morning I had to restart foxfire and it did the install. But I never had a "restore last session" question or opportunity from foxfire. Favorites is OLD information, not what I use day in, day out; I use the tabs for that. I need last session restored.
== This happened ==
Not sure how often
== this morning (last night)

That's not a lot of help, corel. 'It's gone.'
May 2012 and it's still happening, especially after a version upgrade; that's not anything like a crash, it's just an upgrade, handled by the user. But the programmers seem so preoccupied with their creation that they fail to notice that a close of one version and an opening of a new is just an ordinary operation to a user [if you're an administrator]. We expect stopping and starting to work, and our last sessions to be remembered over that 'great divide'.
What's so radical about respecting a user's environment?
Not pretty, Mozilla.

Similar Messages

My phone update didn't work. After trying to install the latest update, it downloaded the update and installed then said the computer needed to restart to finish; the computer restarted but now my iphone is not appearing in the list of devices in itunes.

The phone itself is not working either. It shows the apple icon and a horizontal bar (black outlined in white). Thanks in advance for any help.

You need to press the power button and the home button at the same time for a few seconds until your phone does a recovery. At least you will have a phone that works with all your contacts. But then you will have the same problem alot of other people are having since this update. You will lose all your music and apps. When you plug into ITunes it will have 2 options after that. Restore from back-up or set up like new. Back-up does nothing and restore to new you will lose everthing (music, Apps)). The only fix so far after your recovery is to plug your phone into another puter that has your ITunes account on it. It doesn't have to have any music or apps, just an account so you can sync your phone. After that plug your phone back into the puter with all your stuff on it and it will re-sync and add all your stuff...Hope this helps

I just lost all recent updates to my iCal from the last days. Can this possibly happen ??? What can I do to restore iCal with the most recent updates?

Hello All, yesterday afternoon I just lost all recent updates to my iCal from the last days. How can this possibly happen ??? It may have occured after I chose the Refresh function after I had problems searching my iCal for a particular event. I think my iPhone was also not properly synched in the morning but I didn't pay it much attention and opened iCal on my MacBookAir instead.
How can I prevent this from happening again?
What can I do to restore iCal with the most recent updates?

Random glitch. It doesn't matter; if you didn't backup the data, then you can't recover the data.
In the future, for any 'important' data, back up that data regularly. Forward the 'important' text messages to your email. Trasnfer your photos & videos to your computer, etcetera.

TS4009 Trying to restore my 4s using icloud and not been given the option to restore from icloud (it says it was last backed up yesterday)

Hi, I have somehow deleted everything from my new 4s. My last computer back up was on my old phone. I have set up back up on icloud and it was last backed up yesterday. When I follow instructions it says it should give me the option to restore from back up on icloud, but it doesn't. What am I doing wrong ? (I have plugged it in and restored via computer and gone back to set up assistant, but it doesn't give me that resore option on the back up page)

Settings/iCloud/Storage & Backup/Manage Storage, swipe sideways on the entry to reveal the delete button.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT201263 hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should

hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should i do ?

In your case your only solution is to restore it ( see http://support.apple.com/kb/HT1808 ) and you may need to force it into restore mode to do that. This will wipe everything off it and reset it as new, without the passcode. You can then redownload purchased content, buy unless you have a sync'd copy of your contacts and photo's they will be gone.

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?

Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424

I have bought a iphone 5 second hand and i restore it and now i need the icloud original user and i don't know it!what can i do?i can not activate my iphone

I have bought a iphone 5 second hand and i restore it and now i need the icloud original user and i don't know it!what can i do?i can not activate my iphone

If you're able to contact the previous owner, send them this link and tell them to follow the instructions.
If not, you can't activate the device but may be able to get it refunded.
Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(112266)

How to re-add the iPhone into the Find My iPhone and than to find the last known possition?

Hello,
I've got my iPhone stolen yesterday in the bar.
In the morning I tried find it by Find My iPhone app but I hit the "remove" button by mistake. Is it possible to reverse this acction even without the iPhone in the hand?
I need to re-add the iPhone into the iCloud (Find My iPhone) and than to find the last known possition. It's serial number is C3******39D
Thank you
Libor
<Edited bu Host>

Ringtones are a one-time only download from the store. You will need to connect the device that you downloaded it on to your computer's iTunes and do File > Devices > Transfer Purchases to copy it over to the Tones part of your computer's iTunes library and you can then sync it to your other device(s).

Nokia Lumia 928 apparently died after an attempted Windows 8.1 update. Replacement phone arrived the next day. How can I restore my contacts, photos, etc.? Backup assistant is no help and I don't know how to access the Cloud.

Nokia Lumia 928 apparently died after an attempted Windows 8.1 update. Replacement phone arrived the next day. How can I restore my contacts, photos, etc.? Backup assistant is no help and I don't know how to access the Cloud.

Did you have the phone set to backup things to the One Drive on Microsoft servers?

How do I get rid of the latest version of Firefox and go back to the last version of Firefox. I want the Google toolbar back!

How do I get rid of the latest version of Firefox and go back to the last version of Firefox. I want the Google toolbar back!

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

I am trying to install Adobe Creative Suite CS2 and I am at the last stage of installation but the pop up window is asking that I insert CD

I am trying to install Adobe Creative Suite CS2 and I am at the last stage of installation but the pop up window is asking that I insert CD #2 but, of course, there is no cd! I tried clicking okay and double clicking the image for CD #2 or file #2 but nothing works - Help!

CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

Hi Prabhuram and falez,
This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
~Surendra

I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?

I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?

Hi Sangeeta,
For a fresh download on a new hard drive, it's best to start with the CC desktop app. Sign into adobe.com and download it here: creative.adobe.com/products/download/creative-cloud
You can then launch the desktop, sign in and download PS & LR.

Im using Itunes version 10.6.3 to try to restore my Ipad. Check for updates tells me this is the most recent verion, but its also telling my I cant restore my Ipad because its doesnt have the software available yet.

Im using Itunes version 10.6.3 to try to restore my Ipad. Check for updates tells me this is the most recent verion, but its also telling my I cant restore my Ipad because its doesnt have the software available yet.

erikfrompenn wrote:
That's what I was affraid of. Is there any other way to restore an Ipad that I've locked myself out of?
Take it to an Apple Store & they'll assist you.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Didn't restore last session following a foxfire update and install, I need the last session restored, how?

Similar Messages

Maybe you are looking for