Dif betwen BDC call transaction and session method
Hi to all,
This is my problem. I want to know, what is the difference between BDC call Transaction method and Session method. where the situation we can use these methods.
I will be thankfull to all.
Session Method :
Asynchronous Processing.
Transfers Data for Multiple Transactions
Synchronous Database Update
During Processing, No Transaction is started until the previous transction has been written to the database.
A Batch Input Processing log is generated for each session
Sessions can not be generated in Parallel.
The Batch Input Porgram must not open a Session until it has closed the preceding Session.
Call Transaction :
Synchronous Processing.
Transfers Data for a single transaction.
Synchronous and Asynchronous Database updating both Possible.
The Program Specifies which kind of updating is desired.
Seperate LUW for the transaction.
The System Performs a database commit immediately before and after the CALL TRANSACTION Using Statement.
No Batch Input Processing Log is generated.
These are the differences between session and call transaction method.
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
Similar Messages
-
Bdc(call transaction and session method)
hi experts,
i want to write for bdc program in which i have used call transaction and session method.please help me.
thank you
with regards,
santoshHi,
See the Sample BDc Code for Vendor Master Upload:
Look at the Include BDCRECX1 for Seesion and Call Transaction types:
REPORT zmm_vendor_master_upload
NO STANDARD PAGE HEADING
LINE-SIZE 255.
ABAP Name : ZMM_VENDOR_MASTER_UPLOAD
Description : This Program is used to Upload the Vendor Master.
Modification Log:
Date Programmer Correction Description
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_vendor OCCURS 0,
bukrs(004), " Company Code
ekorg(004), " Purchase Orgn
ktokk(004), " Account Group
Address Screen
anred(015), " Title
name1(035), " Name1
sortl(010), " Sort Field
name2(035), " Name2
name3(035), " Contact Person1
name4(035), " Contact Person 2
stras(035), " Street
pfach(010), " PO Box
ort01(035), " City
pstlz(010), " Postal Code
land1(003), " Country
spras(002), " Language
telf1(016), " Telephone No
telfx(031), " Fax Number
lfurl(132), " URL-Mail Id
Material Group Characteristics
klart(003), " Class Type '010'
class(018), " Class 'Vendor'
mname_01(030), " Characteristic
mname_02(030), " Characteristic
mname_03(030), " Characteristic
mwert_01(030), " Charct.Value
mwert_02(030), " Charct.Value
mwert_03(030), " Charct.Value
Control Data
emnfr(010), " Manufact.Part No
Bank Details
banks_01(003), " Country of Bank1
banks_02(003), " Country of Bank2
bankl_01(015), " Bank Key of 1
bankl_02(015), " Bank Key of 2
bankn_01(018), " Account No Bank1
bankn_02(018), " Account No Bank2
Accounting Info
akont(010), " Reconcillation Account
zuawa(003), " Sort Key
fdgrv(010), " Cash Management Group
Payment Transactions
zterm(004), " Payment terms
reprf(001), " Check Double Inv.
zwels(010), " Payment Method
hbkid(005), " House Bank
xpore(001), " Individ.Payment
Correspondence
mahns(001), " Dunning Level
xausz(001), " Account Statement
Withholding Tax Details
qland(003), " Withholding Tax Country
witht_01(002), " WH tax Type
wt_withcd(002), " WH Tax Code
wt_subjct(001), " Indicator:WH Tax
Purchasing Data
waers(005), " Currency
zterm1(004), " Payment Terms
END OF i_vendor.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
Paramters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_vendor
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
LOOP AT i_vendor.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-BUKRS'
i_vendor-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
i_vendor-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
i_vendor-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=KLAS'.
PERFORM bdc_field USING 'LFA1-ANRED'
i_vendor-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
i_vendor-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
i_vendor-sortl.
PERFORM bdc_field USING 'LFA1-NAME2'
i_vendor-name2.
PERFORM bdc_field USING 'LFA1-NAME3'
i_vendor-name3.
PERFORM bdc_field USING 'LFA1-NAME4'
i_vendor-name4.
PERFORM bdc_field USING 'LFA1-STRAS'
i_vendor-stras.
PERFORM bdc_field USING 'LFA1-PFACH'
i_vendor-pfach.
PERFORM bdc_field USING 'LFA1-ORT01'
i_vendor-ort01.
PERFORM bdc_field USING 'LFA1-PSTLZ'
i_vendor-pstlz.
PERFORM bdc_field USING 'LFA1-LAND1'
i_vendor-land1.
PERFORM bdc_field USING 'LFA1-SPRAS'
i_vendor-spras.
PERFORM bdc_field USING 'LFA1-TELF1'
i_vendor-telf1.
PERFORM bdc_field USING 'LFA1-TELFX'
i_vendor-telfx.
PERFORM bdc_field USING 'LFA1-LFURL'
i_vendor-lfurl.
PERFORM bdc_dynpro USING 'SAPLCLCA' '0602'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMCLF-KLART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'RMCLF-KLART'
'010'. "i_vendor-klart.
PERFORM bdc_dynpro USING 'SAPLCLFM' '0500'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMCLF-CLASS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=AUSW'.
PERFORM bdc_field USING 'RMCLF-CLASS(01)'
'Vendor'."i_vendor-class.
PERFORM bdc_dynpro USING 'SAPLCTMS' '0109'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RCTMS-MWERT(03)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
PERFORM bdc_field USING 'RCTMS-MNAME(01)'
'MATERIALGROUP'." i_vendor-mname_01.
PERFORM bdc_field USING 'RCTMS-MNAME(02)'
'MATERIALGROUP'." i_vendor-mname_02.
PERFORM bdc_field USING 'RCTMS-MNAME(03)'
'MATERIALGROUP'." i_vendor-mname_03.
PERFORM bdc_field USING 'RCTMS-MWERT(01)'
i_vendor-mwert_01.
PERFORM bdc_field USING 'RCTMS-MWERT(02)'
i_vendor-mwert_02.
PERFORM bdc_field USING 'RCTMS-MWERT(03)'
i_vendor-mwert_03.
PERFORM bdc_dynpro USING 'SAPLCLFM' '0500'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMCLF-CLASS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENDE'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-ANRED'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-EMNFR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-EMNFR'
i_vendor-emnfr.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFBK-BANKS(01)'
i_vendor-banks_01.
PERFORM bdc_field USING 'LFBK-BANKS(02)'
i_vendor-banks_02.
PERFORM bdc_field USING 'LFBK-BANKL(01)'
i_vendor-bankl_01.
PERFORM bdc_field USING 'LFBK-BANKL(02)'
i_vendor-bankl_02.
PERFORM bdc_field USING 'LFBK-BANKN(01)'
i_vendor-bankn_01.
PERFORM bdc_field USING 'LFBK-BANKN(02)'
i_vendor-bankn_02.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFB1-AKONT'
i_vendor-akont.
PERFORM bdc_field USING 'LFB1-ZUAWA'
i_vendor-zuawa.
PERFORM bdc_field USING 'LFB1-FDGRV'
i_vendor-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-XPORE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFB1-ZTERM'
i_vendor-zterm.
PERFORM bdc_field USING 'LFB1-REPRF'
c_x. "i_vendor-reprf.
PERFORM bdc_field USING 'LFB1-ZWELS'
i_vendor-zwels.
PERFORM bdc_field USING 'LFB1-HBKID'
i_vendor-hbkid.
PERFORM bdc_field USING 'LFB1-XPORE'
c_x. "i_vendor-xpore.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFB5-MAHNS'
i_vendor-mahns.
PERFORM bdc_field USING 'LFB1-XAUSZ'
i_vendor-xausz.
PERFORM bdc_dynpro USING 'SAPMF02K' '0610'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBW-WT_SUBJCT(01)'.
PERFORM bdc_field USING 'LFB1-QLAND'
i_vendor-qland.
PERFORM bdc_field USING 'LFBW-WITHT(01)'
i_vendor-witht_01.
PERFORM bdc_field USING 'LFBW-WT_WITHCD(01)'
i_vendor-wt_withcd.
PERFORM bdc_field USING 'LFBW-WT_SUBJCT(01)'
c_x.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFM1-WAERS'
i_vendor-waers.
PERFORM bdc_field USING 'LFM1-ZTERM'
i_vendor-zterm1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
Call the Transaction
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
Close the BDc Session
PERFORM close_group.
Regards,
Anji -
Regarding updattion of record...in BDC call transaction and session method.
Hi all,
I am uploading 10 records in to sap . By using call transaction method . But after insertion of 5 record server suddenly shutdown. Then what happens . What we have to do
and what about the updated 5 recs as well as remaining 5 recs.
And if it happens in case of BDC-SESSION then what is the status what we have to do..
PLEZ GIVe reply soon...its urgent
regards,
anilreddy...Hi,
If you are using call transaction , you will not get error messages for balance 5 records that not updated. you need to cross check with the transaction and rerun again.
Session method is concerned no session will be created. system shutdown happened before the close_group,
a® -
About bdc call transaction and session method
hi,
can i know whether we could proceed with the bdc techniques without even copying and pasting in our program the perform statements from the recording process that we do for the particular transaction in TC SHDB.
if we can pls send me a code for example.
thanks in advancehi,
check this example.
For doing BDc Manually we have to analyse the transaction i.e. ex-XK01 we have to know the Screen numbers and screen fileds.
first analyse the transaction and then write performs for bdc_filed and bdc_dynpro.
REPORT ZSR_BDC_CT_ERROR.
DATA: BEGIN OF ITAB OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
END OF ITAB.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
it_error like itab occurs 0 with header line,
BDCMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'z:\ct.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
REFRESH BDCTAB.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
ITAB-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
ITAB-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
ITAB-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
ITAB-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
ITAB-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
ITAB-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING BDCTAB MODE 'A' UPDATE 'A' MESSAGES INTO BDCMSG.
*LOOP AT BDCMSG.
if sy-subrc <> 0.
move-corresponding itab to it_error.
endif.
READ TABLE BDCMSG WITH KEY MSGTYP = 'E'.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = BDCMSG-MSGID
LANG = 'EN'
NO = BDCMSG-MSGNR
V1 = BDCMSG-MSGV1
V2 = BDCMSG-MSGV2
V3 = BDCMSG-MSGV3
V4 = BDCMSG-MSGV4
IMPORTING
MSG = BDCMSG-MSGV1
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE :/ BDCMSG-MSGNR,BDCMSG-MSGV1.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
filename = 'z:\cerror.txt'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = it_error
FIELDNAMES = FIELDNAMES
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form dynpro
FORM BDC_DYNPRO USING P_P1
P_P2.
CLEAR BDCTAB.
BDCTAB-PROGRAM = P_P1.
BDCTAB-DYNPRO = P_P2.
BDCTAB-DYNBEGIN = 'X'.
APPEND BDCTAB.
ENDFORM. " dynpro
*& Form bdc_field
text
-->P_P3 text
-->P_P4 text
FORM BDC_FIELD USING P_P3
P_P4.
CLEAR BDCTAB.
BDCTAB-FNAM = P_P3.
BDCTAB-FVAL = P_P4.
APPEND BDCTAB.
ENDFORM. " bdc_field
Session:
REPORT ZSR_BDC_SESSION.
DATA: BEGIN OF ITAB OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
END OF ITAB.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BDCMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'z:\flatfiles\sr1.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'SR'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
ITAB-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
ITAB-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
ITAB-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
ITAB-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
ITAB-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
ITAB-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XK01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = BDCTAB
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
*perform bdc_transaction using 'XK01'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
*perform close_group.
FORM BDC_DYNPRO USING VALUE(P_0069)
VALUE(P_0070).
CLEAR BDCTAB.
BDCTAB-PROGRAM = P_0069.
BDCTAB-DYNPRO = P_0070.
BDCTAB-DYNBEGIN = 'X'.
APPEND BDCTAB.
ENDFORM. " bdc_dynpro
*& Form bdc_field
FORM BDC_FIELD USING VALUE(P_0074)
VALUE(P_0075).
IF P_0075 IS NOT INITIAL.
CLEAR BDCTAB.
BDCTAB-FNAM = P_0074.
BDCTAB-FVAL = P_0075.
APPEND BDCTAB.
ENDIF.
ENDFORM. " bdc_field -
What is difference bet call transaction and session method in BDC
hi
what is difference bet call transaction and session method in BDC
thanks.Hi,
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Thanks,
Reward If Helpful. -
Decision between call transaction and session method:BDC
Hi,
Kindly guide how to take decision between call transaction and session method?
Thanks,
SanjayHello Sanjay,
here are some links which discuss the difference between them:
http://scn.sap.com/thread/721344
http://scn.sap.com/thread/166845
Best regards,
Laszlo -
Regarding Call Transaction and Session Method in BDC.
Hi,
If there are 50 records and 25th row data is having error.
What will happen when we run it in Call Transaction and Session Method in both Foreground and Background methods ? Can anybody explain me in details ?Hi Naresh,
If you are using call transaction,
if executed in Foreground, 24 records will be posted and for 25th you will have option to correct data or skip.
if executed in background,
if mode is N, 24 records are processed 25th is skipped and 26th onwards is processed again.
if mode is E, 24 records will be posted and for 25th you will have option to correct data or skip.
For Session also it should be same the difference is that the error would be there in sessionlog and you can re-process it.
Hope it helps.
Regards,
Komal. -
What is the diffreence between call transaction and session method
hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala -
Difference b/w call transaction and session method
hi there,
whatz the major difference b/w call transaction and session method in BDC.
thanks in advance
dattuVijay,
Welcome to SDN
<b>SESSION METHOD</b>
Data is not updated in database table unless Session is processed.
No sy-subrc is returned.
Error log is created for error records.
Updation in database table is always synchronous
<b>CALL TRANSACTION</b>
Immediate updation in database table.
Sy-subrc is returned.
Errors need to be handled explicitly
Updation in database table can be synchronous Or Asynchronous.
Chandra. -
Can we use Call transaction and session method in same program ?
Hi experts,
Is it suggested to use call Transaction and session method in the same Program ?
i have a doubt , why cant we use multiple call transactions in same program instead of session method if we have multiple transaction updations ?Hi Dengyong Zhang,
we can use the call transation and session method in same program.
However for better performance it's benificial to use call trasaction method of BDC. but if u want to upload very large amount of data then Session method is more preferable to use.
Session method is one of the method of BDC.
U can also use BAPI to upload the data in SAP but it's a different concept than BDC. Performance wise BAPI is more advantageous than BDC. -
Call transaction , and session method in the same program
hi experts,
Can anybody tell me in which cases we will use both call transaction and session methods in same program
if possible send me example code.
Regards
TrinadhHi Dengyong Zhang,
we can use the call transation and session method in same program.
However for better performance it's benificial to use call trasaction method of BDC. but if u want to upload very large amount of data then Session method is more preferable to use.
Session method is one of the method of BDC.
U can also use BAPI to upload the data in SAP but it's a different concept than BDC. Performance wise BAPI is more advantageous than BDC. -
Error in CALL TRANSACTION and SESSION Method
I have 8 records (1,2,3,4,5,6,7,8) to update into SAP database using CALL TRANSACTION and SESSION Method. If there is a error in 6th record. What happens in both call transaction and session method.
Please let me know which records will process and what about the error record. How to process only the error record if all other records have updated into database.Hi Patil_sumeet,
if your code for this is not protected secret of some federal agency, you may read [How to post code in SCN, and some things NOT to do...|How to post code in SCN, and some things NOT to do...; and then post relevant lines here.
According to the facts presented until know it may have been better to ask Radio Eriwan
Regards
Clemens -
I want to use both call transaction and session method in the same
Hi,
1. I want to use call transaction and session method in a single trans..how to do?
2. I have 1000 records in it 500 records is updated using call transaction remaining 500 i hve to update with session how to do?
3. Multiple transaction is possible in call transaction how?I suggest you try fulfilling your requirements yourself and come back with specific problems along the way.
-
Can we hav call transaction and session method for an application
can we hav call transaction and session method for an application ?if yes how?
Hi ,
You can. If Call Transaction fails, a batch input session can be created.
Check this example-
Call the transaction. Messages from Call Transaction are stored in the
internal table messtab
CALL TRANSACTION 'LT01' USING bdc_tab MODE 'N' UPDATE 'S'
MESSAGES INTO messtab.
IF sy-subrc = 0.
Call transaction successfull, get the number of the Transfer Order that
was created
LOOP AT messtab.
IF messtab-dynumb = '0104' AND messtab-msgnr = '016'.
w_transportorderno = messtab-msgv1.
ENDIF.
ENDLOOP.
ELSE.
Call transaction failed, create a batch input session instead.
PERFORM open_group.
PERFORM bdc_insert USING 'LT01'.
PERFORM close_group.
ENDIF.
Regards,
Sookshma -
Call transaction and session method -urgent
Hi,
can anybody tell me the diffence between call transaction and session method .
what are the advantage of each method and when we go for it.
how to see log file in session method.
i will really appricitatehi,
check this code,
REPORT ZTEST_ABCD NO STANDARD PAGE HEADING LINE-SIZE 255.
*REPORT zabzon_bdc
NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPES: BEGIN OF record,
xbanl LIKE raifp3-xbanl,
anln1 LIKE raifp2-anln1,
anln2 LIKE raifp2-anln2,
anbtr TYPE string,
bldat TYPE string,
budat TYPE string,
bzdat TYPE string,
sgtxt LIKE raifp2-sgtxt,
monat LIKE raifp2-monat,
blart LIKE raifp1-blart,
gkont LIKE raifp2-gkont,
bwasl LIKE raifp1-bwasl,
xblnr LIKE raifp1-xblnr,
END OF record.
TYPES :BEGIN OF x_messages,
index TYPE i,
msgtyp(1),
message(120),
END OF x_messages.
DATA: it_record TYPE STANDARD TABLE OF record,
wa_record TYPE record.
DATA : it_messages TYPE STANDARD TABLE OF x_messages,
wa_messages TYPE x_messages.
DATA : it_bdcmsg TYPE STANDARD TABLE OF bdcmsgcoll,
wa_bdcmsg TYPE bdcmsgcoll.
DATA : bdcdata TYPE STANDARD TABLE OF bdcdata,
wa_bdcdata TYPE bdcdata.
DATA : it_excel TYPE STANDARD TABLE OF alsmex_tabline,
wa_excel TYPE alsmex_tabline.
DATA : fname TYPE string.
DATA :l_index LIKE sy-tabix.
data : str type string.
*Selection screen.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file1 TYPE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN : END OF BLOCK b1.
*Selction-Screen F4 Help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
*START-OF-SELECTION.
START-OF-SELECTION.
PERFORM process_f1data.
PERFORM execute_bdc.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR wa_bdcdata.
wa_bdcdata-program = program.
wa_bdcdata-dynpro = dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO bdcdata.
CLEAR wa_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval .
CLEAR wa_bdcdata.
wa_bdcdata-fnam = fnam.
wa_bdcdata-fval = fval.
APPEND wa_bdcdata TO bdcdata.
CLEAR wa_bdcdata.
ENDFORM. "BDC_FIELD
*& Form process_f1data
text
--> p1 text
<-- p2 text
FORM process_f1data.
REFRESH it_excel.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file1
i_begin_col = 1
i_begin_row = 1
i_end_col = 99
i_end_row = 1000
TABLES
intern = it_excel.
LOOP AT it_excel INTO wa_excel.
CASE wa_excel-col .
WHEN '1' .
wa_record-xbanl = wa_excel-value.
WHEN '1' .
wa_record-anln1 = wa_excel-value.
WHEN '2'.
wa_record-anln2 = wa_excel-value.
WHEN '3'.
wa_record-anbtr = wa_excel-value.
WHEN '4'.
wa_record-bldat = wa_excel-value.
WHEN '5'.
wa_record-budat = wa_excel-value.
WHEN '6'.
wa_record-bzdat = wa_excel-value.
WHEN '7'.
wa_record-sgtxt = wa_excel-value.
WHEN '8'.
wa_record-monat = wa_excel-value.
WHEN '9'.
wa_record-blart = wa_excel-value.
WHEN '10'.
wa_record-gkont = wa_excel-value.
WHEN '11'.
wa_record-bwasl = wa_excel-value.
WHEN '12'.
wa_record-xblnr = wa_excel-value.
ENDCASE.
AT END OF row.
CONDENSE : wa_record-anln1,wa_record-anln2,
wa_record-anbtr,wa_record-bldat,wa_record-budat,
wa_record-bzdat,wa_record-sgtxt,wa_record-monat,
wa_record-blart,wa_record-gkont,wa_record-bwasl,
wa_record-xblnr.
APPEND wa_record TO it_record.
CLEAR wa_record.
ENDAT.
ENDLOOP.
ENDFORM. " process_f1data
*& Form execute_bdc
text
--> p1 text
<-- p2 text
FORM execute_bdc.
LOOP AT it_record INTO wa_record.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=NEWA'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP3-XBANL'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'22.05.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-ANLN1'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
wa_record-anln1. "'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'22.05.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-ANLN2'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
wa_record-anln2. "'0'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'22.05.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-ANBTR'.
str = wa_record-anbtr.
PERFORM bdc_field USING 'RAIFP2-ANBTR'
wa_record-anbtr. "'45000'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'22.05.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-ANBTR'
'45,000.00'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP1-BLDAT'.
PERFORM bdc_field USING 'RAIFP1-BLDAT'
wa_record-bldat. "'01.04.2008'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'22.05.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-ANBTR'
'45,000.00'.
PERFORM bdc_field USING 'RAIFP1-BLDAT'
'01.04.2008'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP1-BUDAT'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
wa_record-budat. "'01.04.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-ANBTR'
'45,000.00'.
PERFORM bdc_field USING 'RAIFP1-BLDAT'
'01.04.2008'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'01.04.2008'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP1-BZDAT'.
PERFORM bdc_field USING 'RAIFP1-BZDAT'
wa_record-bzdat. "'01.04.2008'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-ANBTR'
'45,000.00'.
PERFORM bdc_field USING 'RAIFP1-BLDAT'
'01.04.2008'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'01.04.2008'.
PERFORM bdc_field USING 'RAIFP1-BZDAT'
'01.04.2008'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-SGTXT'.
PERFORM bdc_field USING 'RAIFP2-SGTXT'
wa_record-sgtxt. "'test01'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=TAB02'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-ANLN1'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-ANBTR'
'45,000.00'.
PERFORM bdc_field USING 'RAIFP1-BLDAT'
'01.04.2008'.
PERFORM bdc_field USING 'RAIFP1-BUDAT'
'01.04.2008'.
PERFORM bdc_field USING 'RAIFP1-BZDAT'
'01.04.2008'.
PERFORM bdc_field USING 'RAIFP2-SGTXT'
'test01'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-MONAT'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
wa_record-monat. "'01'.
PERFORM bdc_field USING 'RAIFP1-BLART'
'AA'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
'1'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP1-BLART'.
PERFORM bdc_field USING 'RAIFP1-BLART'
wa_record-blart. " 'AA'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
'1'.
PERFORM bdc_field USING 'RAIFP1-BLART'
'AA'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-GKONT'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
'1'.
PERFORM bdc_field USING 'RAIFP1-BLART'
'AA'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-GKONT'.
PERFORM bdc_field USING 'RAIFP2-GKONT'
wa_record-gkont. "'1600'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
'1'.
PERFORM bdc_field USING 'RAIFP1-BLART'
'AA'.
PERFORM bdc_field USING 'RAIFP2-GKONT'
'1600'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP1-BWASL'.
PERFORM bdc_field USING 'RAIFP1-BWASL'
wa_record-bwasl. "'100'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
'1'.
PERFORM bdc_field USING 'RAIFP1-BLART'
'AA'.
PERFORM bdc_field USING 'RAIFP2-GKONT'
'1600'.
PERFORM bdc_field USING 'RAIFP1-BWASL'
'100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP1-XBLNR'.
PERFORM bdc_field USING 'RAIFP1-XBLNR'
wa_record-xblnr. "'TEST01'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RAIFP2-ANLN1'.
PERFORM bdc_field USING 'RAIFP3-XBANL'
'X'.
PERFORM bdc_field USING 'RAIFP2-ANLN1'
'3100309'.
PERFORM bdc_field USING 'RAIFP2-ANLN2'
'0'.
PERFORM bdc_field USING 'RAIFP2-MONAT'
'1'.
PERFORM bdc_field USING 'RAIFP1-BLART'
'AA'.
PERFORM bdc_field USING 'RAIFP2-GKONT'
'1600'.
PERFORM bdc_field USING 'RAIFP1-BWASL'
'100'.
PERFORM bdc_field USING 'RAIFP1-XBLNR'
'TEST01'.
PERFORM bdc_dynpro USING 'SAPLAMDP' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SHWD'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
CALL TRANSACTION 'ABZON' USING bdcdata
MODE 'A'
MESSAGES INTO it_bdcmsg.
PERFORM collect_bdc_messages.
ENDLOOP.
ENDFORM. " execute_bdc
*& Form collect_bdc_messages
text
--> p1 text
<-- p2 text
FORM collect_bdc_messages.
DATA: l_msg(100).
LOOP AT it_bdcmsg INTO wa_bdcmsg.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = wa_bdcmsg-msgid
lang = wa_bdcmsg-msgspra
no = wa_bdcmsg-msgnr
v1 = wa_bdcmsg-msgv1
v2 = wa_bdcmsg-msgv2
IMPORTING
msg = l_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONDENSE l_msg.
CLEAR wa_bdcmsg.
wa_messages-index = l_index.
wa_messages-msgtyp = wa_bdcmsg-msgtyp.
wa_messages-message = l_msg.
APPEND wa_messages TO it_messages.
WRITE:/ wa_messages-message.
ENDLOOP.
l_index = l_index + 1.
REFRESH it_bdcmsg.
ENDFORM. " collect_bdc_messages
regards
siva
Maybe you are looking for
-
External Hard Drive changed permissions to 'read only'
I have been searching everywhere for a solution to this with no luck, so I figured I would start my own post and see what comes of it. Computer: iMac Intel 24" /3.0ghz/4gb ram/1TB WD hard drive External Drive giving me issues: Western Digital 1.5TB (
-
MulticastSocket. To whom MC message was sent?
Hi All, My scenarion is: 1. I created MulticastSocket on port XXXX. (Server side) 2. Socket was joined to Multicast groups 228.5.6.7 AND 228.5.6.8 (Server side) 3. Multicast message was sent from another PC to group 228.5.6.7 Client side) 4. Message
-
Very frustrating problem with mousepad, clicker, and cursor.
Hi, guys. Anyone who could help me with this would have my sincere appreciation. Recently (in the last week), my three-year old MBP has been giving me ****. Sometimes the problem is around, sometimes it isn't, but tonight was the last straw. I can ha
-
New controller classes for Web IC views
Hi Could anyone help out with the following:- I 'inherited' a customer's Web IC implementation to support recently. The system hasn't been properly documented, I'm new to Web IC and they've just applied support packages to the system which has cause
-
Suggestions for tracks i can use on a 3 min sports promo?
I am creating a 3 min sports promo for a client, they are willing to pay for the use of a well known pop or rock song from the last 10 years, i just need to find the right song and contact the publishers for using it, it will be used one time only at