Difference between local amount and document amount in the same currency

Dear All,
Why different between local amount and document amount with the same currency in some FI document line items? Both currency is 'TWD' and update currecy(BSEG-PSWSL) is 'USD'.
What is the purpose of update currency(BSEG-PSWSL) and update amount(BSEG-PSWBT) ?
Does update curreny cause the difference mentioned above?
Thanks all in advance.
Best regards,
SAP user

Dear Sir,
Thanks for your kindly response!
These fields of the FI document header are following:
Local currency 1(BKPF-HWAER) : TWD
Local currency 2(BKPF-HWAE2) : null
Local currency 3(BKPF-HWAE3) : null
Document currency (BKPF-WAERS) : TWD
Transcation currency means which field ?
Transaction code (BKPF-TCODE) : FB1S
The line items as following :
Itm PK Account    Account  short text   Amount
1   40   21302500  A/E-Maintenance     1,119,350
2   50   21302500  A/E-Maintenance     1,119,350-
Amount in document currency is 1,119,350(TWD) but amount in local currency is 1,087,998(TWD).
The line item's additional data :
Amount for Updating in General Ledger : 33,894.02(USD)
Thanks a lot !!
Best regards,
SAP user

Similar Messages

  • Difference between Data-centric and Document-centric use

    Hi,
    Can someone suggest what exactly is the difference between Data-centric and Document-centric use and examples if any.
    Thanks in advance.
    Chaitanya

    Maybe it helps if you look at it this way...
    Document centric: document centric use of xml data is data that you always use in its complete form. If you want to use the data, then you always will retrieve it as one entity or you save it as one entity. You are not interested in the xml data / information inside this "package" / document, you are only interested in its total form. Lets say, you have an invoice which can be printed on one sheet of paper. This paper that contains you data, will always be treated in a document driven way, that is, in its total representation: information containted on a sheet of paper (document).
    Data centric. data centric use of xml, is usage of data were the main interest point is focused on only pieces of the total set of xml data within a document. So instead of being interested in the whole invoice, you only are interested in information like "amount of money to be payed" or "invoicenumber".
    Handling of XML data comes with (hidden) costs. Knowing how your data will be used, has to be used, is one of the first steps in designing you environment (and will have an big impact if you choose poorly). For instance, if you know that your data will always be handled (and must be stored) in a document driven way, then it will make sense to store it based on CLOB based XMLType storage. This will garantee best performance retrieval for your xml document. If you now that your xml data has to be stored so that it can be handled in a data centric way, then Object Relational XMLType storage. If conditions are setup properly data retrieval, inserts and updates will be more cost efficient then when based on CLOB XMLType storage.
    There are more differences and "cost markers" when or when not to use CLOB, OR or for instance Binary XML. The first two chapters of the XMLDB Developers Guide for Oracle 11g will give you a good head start making some of those decisions. Be also aware that you probably will have to make compromises. The current state of XML, for example, doesn't have the final solution yet for a uniform storage method.
    Message was edited by:
    Marco Gralike

  • What is difference between local variable and property node ?

    What is difference between local variable and property node ?
    " 一天到晚游泳的鱼"
    [email protected]
    我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
    欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

    To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
    - Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
    - Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
    This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Race condition.vi ‏9 KB
    Compare Locals Properties and Wires.vi ‏18 KB

  • What is the difference between local printing and remote printing in SAP

    Hello Nation,
    I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
    1.What is local printing in SAP ?
    2.What is Remote Printing in SAP?
    3.what is the difference between local printing and remote printing in SAP ?
    Thank you in Advance.
    Regards,
    -Mohamed Naveen.

    Hi,
    This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • What's the difference between "local reminder" and "push notification?

    A friend has been bugging me about this, does anyone know what's the difference between "local reminder" and "push notification" in an iPhone app?

    In a nutshell, local notifications are popup notifications from applications on your phone, based on data that's already on the local phone.  Push notifications are popup notifications you get when new info (like an email, tweet, or update from something like Facebook) gets pushed to your device from a server. 

  • Difference between local agent and standalone agent

    Hi all,
    Can you please tell me the difference between local agent and standalone agent?
    I am getting a bit confused about this.
    Regards,
    Sourav

    Local agent will be running under the context of the main ODI session i.e. it is linked to an open session of the designer, operator etc. Standalone ODI agents run in their own JVM process and could be installed on any server and do not require an open instance of the ODI client GUI to run scenarios

  • Difference Between Local Project and Global Project

    H Gurus,
    What is the main difference between Local Implimentation Project and Global implimentation Project. If the Global project started with some interwels at various locations. Please tell me in respect of configuration of GL AR AP.

    Hi Kumar,
    If the project started at various locations, the first thing you should take care, is setting of posting period variants and fiscal year variants.  next will be time schdules, as there will be climatic and timing constraints which may cause some work disorders.  Last but not least is, co-ordination among all project locations. I think this will help to some extent.
    Pl. assign points if useful
    Appaji
    Prithvi Information Solutions

  • Difference Between Current Day and fist day of the payroll period

    Hi,
    How do i find the difference between the current day and the first day of the payroll period with period parameter XX.
    Operation VARSTFDYXX is used to decide if the current day is the first day of the payroll period. But is there any operation available to check the difference in exact number of days.
    I know hrs=y is used to find difference between current day and a date specification record from IT0041, but i need to check difference between current day and first day from a payroll period parameter.
    Any response is greatly appreciated.
    Thanks,
    Imaneul Rajiv

    No! haven't seen it at all! Do I have to drain the battery completely and then charge it? I did that the first day I bought the phone and yet the stats are the same for me
    PS: I am referring to the Call Time stats and not the Usage/Standby stats

  • Difference between ASA-SM1 and FWSM.What is the throughput of each of them?

    Can any1 tell me wat is the difference between ASA-SM1 and FWSM
    and what is the throughput of it?
    Thanks in advance
    Khem

    The FWSM is end of sale. It has been replaced by the ASA-SM1.
    See the following link for details of the performance differences between the two devices:
    http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps11621/qa_c67-662207.html
    Don't forget to rate all posts that are helpful.

  • Is there a difference between firewire 800 and firewire 400 besides the connectors

    is there a difference between firewire 800 and firewire 400 cables besides the connectors?

    Speed.   800 is up to twice the speed, and sometimes faster.    You can connect the two connectors with a cable that fits both ends, but you will be left with the slowest speed.

  • How do I load balance TFTP between two servers and a client on the same subnet?

    Hi,
    I have trawled through several documents and tried umpteen different configs, all to no avail. I have a PXE boot client trying to access a boot file via TFTP from a couple of TFTP servers on the same VLAN/subnet. For HA purposes I want to load balance the two TFTP servers.
    Config is currently;
    =====
    probe icmp ICMP_PROBE
      description icmp probe for default gateway tracking
      interval 5
      passdetect interval 15
    rserver host server1
      description Server1
      ip address 10.0.0.1
      inservice
    rserver host server2
      description Server 2
      ip address 10.0.0.2
      inservice
    serverfarm host serverfarm_01
      description servers used
      probe ICMP_PROBE
      rserver server1
        inservice
      rserver server2
        inservice
    class-map match-all L4_VIP_TFTP
      10 match virtual-address 10.0.0.10 udp eq 69
    policy-map type loadbalance first-match L7_TFTP
      class class-default
        serverfarm serverfarm_01
    policy-map multi-match L4_LB_VIP_POLICY
      class L4_VIP_TFTP
        loadbalance vip inservice
        loadbalance policy L7_TFTP
        loadbalance vip icmp-reply active
    nat dynamic 1 vlan 200
    interface vlan 200
      ip address 10.0.0.250 255.255.255.0
      nat-pool 1 10.0.0.241 10.0.0.243 netmask 255.255.255.255 pat
      service-policy input L4_LB_VIP_POLICY
      no shutdown
    ip route 0.0.0.0 0.0.0.0 10.0.0.254
    =====
    I have read the doco by Ivan Kovacevic amongst many others but as my clients and servers are on the same subnet, the config doesnt work.
    Can anybody point me in the right direction please. The devices are ACE 4710 running A3(2.3).
    Thanks

    Try using the following configuration:
    Note: Please make sure to configure also a udp probe to probe udp port 69, in case the application is down.
    You need to configure a management policy on the interface when using a UDP probe.
    That is because, when port 69 on the server will be unreachable, the server will send an ICMP unreachable.
    ACE will consider a udp probe as "failed" only when it sees ICMP unreachable.
    Without a management policy-map, the ICMP unreachable message will be dropped.
    Also, add an ICMP probe to the rserver because udp probe will not be enough when the physical interface will be down.
    That is because UDP is a connection-less protocol. To consider a UDP probe successfull, ACE need to see NO answer from the server in respose to the probe.
    The ACE will not see any answer from the server when the interface is down and thus, will consider the probe as "sucessful".
    With ICMP probe attached to the rserver, you also test the reachability of the server and not only the UDP port.
    Here is the configuration (of course, you can chage the names of the of the objects to the name you are using if you want) :
    access-list ALL line 10 extended permit ip any any
    probe udp TFTP
      port 69
      interval 5
      passdetect interval 15
    probe icmp ICMP_PROBE
      interval 5
      passdetect interval 15
    rserver host TFTP_1
      ip address 10.0.0.1
      probe TFTP
      probe ICMP_PROBE
      inservice
    rserver host TFTP_2
      ip address 10.0.0.2
      probe TFTP
      probe ICMP_PROBE
      inservice
    serverfarm host TFTP-SFARM
      rserver TFTP_1
        inservice
      rserver TFTP_2
        inservice
    sticky ip-netmask 255.255.255.255 address source TFTP-STICKY
      timeout 10
      replicate sticky
      serverfarm TFTP-SFARM
    class-map type management match-any MANAGE
      2 match protocol icmp any
    class-map match-all NAT
      2 match virtual-address 0.0.0.0 0.0.0.0 udp any
    class-map match-all TFTP
      2 match virtual-address 10.0.0.10 udp eq 69
    policy-map type management first-match MANAGE
      class MANAGE
        permit
    policy-map type loadbalance first-match ROUTE
      class class-default
        forward
    policy-map type loadbalance first-match TFTP-POL
      class class-default
        sticky-serverfarm TFTP-STICKY
    policy-map multi-match TFTP-MULTI
      class TFTP
        loadbalance vip inservice
        loadbalance policy TFTP-POL
        nat dynamic 1 vlan 212
      class NAT
        loadbalance vip inservice
        loadbalance policy ROUTE
        nat dynamic 2 vlan 212
    interface vlan 212
      ip address 10.0.0.250 255.255.255.0
      no normalization
      access-group input ALL
      nat-pool 1 10.0.0.241 10.0.0.243 netmask 255.255.255.0 pat
      nat-pool 2 10.0.0.10 10.0.0.10 netmask 255.255.255.0 pat
      service-policy input TFTP-MULTI
      service-policy input MANAGE
      no shutdown
    Let me know how it goes.
    Good luck!

  • Difference between F.05 and FBL3N amount in local currency

    Hey all,
    There are difference between standart reports F.05 and FBL3N amount in local currency. Amount in Foreign currencies are the same. What could be the problem?
    Thanks,
    Esin

    FBL3N show you the balances as per the exchange rate of Posting date of the document.
    F.05 show you the balances as per the exchange rate of valuation key date.
    Also exchange rate type might be different for foreign currency valuation.
    Rgds
    Murali. N

  • Time difference between local time and server time

    Hi Guys,
    I am currently experiencing a time difference of 40 minutes between the local time and the current server time.
    The local time seems to be 40 minutes slower than my current time.
    Path for Local Time : CMC -> home -> servers -> input.file repository sever -> metrics tab.  (Under the category of Installed on machine peacok, there is a local time.
    Question is how can i sync the local time with my current server time?
    Let me know if more info is required.
    Rgds
    Collin

    Hi Collin,
    Under  CMC >Home >Input FRS , the local time shown is current time of BO Server.
    Since CMC is web-based, any date, time value will be coming from BO Server box.
    u2022     In case your system and BO server is in same time zone  then update the date-time of BO Server
    u2022     In case your system and BO server is in different time zone then check with IT team to figure out the BO Server will be maintained in which time zone.
    u2022     If current requirement is specific to some report then you can add 40 min in all date value in report to get the desired result.
    Thanks,
    Sushil

  • Is there a difference between ipad demo and normal ipad except the software?

    Helli, i want to ask if someone know is there any significant difference between ipad demo version and normal ipad for selling ? Except the software difference and is true that ipad demo can be erased to a normal OS And worked normally after that? Thanks

    As far as I know only Apple can potentially change the iOS on a demo model iPad to be the proper version, due to limitations within the demo version you probably won't be able to change/update it yourself.

  • How can I easily manage different libraries of music between my iPad and my iPhone from the same computer?

    My 32 GB iPad stores much more data than my 16 GB iPhone... clearly. But I want to be able to easily sync these two seperate devices with two different sets of music from my iTunes. As it stands now, my iPad will always have the same amount of music as my iPhone because my iPhone is maxed out and the two devices are synced on the same computer from the same library. Do you understand where I'm coming from? Let me know if you need clarification.
    I want to be able to have my iPhone filled with individual songs, whereas my iPad would have the full albums. There doesn't seem to be an efficient way to do this with one computer. Any suggestions would be great. Thanks.

    It can be done very easily actually. I do it with three different iDevices.
    Connect the iDevice to your PC and launch iTunes. Select the iDevice from the left sidebar of the iTunes window. Then click on the Music Tab. Select only the music that you want on that particular iDevice and then sync the device with those selections.
    Do the same thing with the other iDevice. When you sync with iTunes the next time, iTunes will remember the music that was synced to that device.
    Make sure that you uncheck Sync Entire Music Library and check Sync Selected playlists, albums, etc and then select all of the music for each device.
    When you make changes to the current configuartion on the iPad - you will have to click on Apply in the lower right corner of the iTunes window.

Maybe you are looking for