Difference in displaying RAW files, between Camera RAW 5.3 and default preview...

Weird problem: when I import new RAW pics from my Canon (EOS 450D), they are previewed by the catalog viewer in very vivid and live colors. However when I try to edit them using Camera RAW 5.3, the INITIAL image that pops up is very dull... How come there is a difference in the algorithm when doing the "default" preview and the one used by the initial view of Camera RAW ?
I want to have the same "start" image in Camera RAW as shown by the default preview...
(I hope this is a clear enough exposition of the problem...)
Thanks!
Misha.

The initial image that pops up is a low resolution .jpg preview that is embedded in the RAW file.
The duller version is indeed your unprocessed RAW photograph. Processing should make it look just as good, or better, than that .jpg preview.

Similar Messages

I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks fo

I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks for any help you may provide

hi,
somewhere on the windows machineshould be something like "network setup wizard". exactly where it is and what it is called i cannot remember off the top of my head, windows help is actually slightly useful here, it should have a link to it.
all the options checked on the mac are only what services the mac is offering to other machines, they have nothing to do with the services it can access (mostly...).
oh yeah, to actually connect to the pc after you have turned its sharing on, use the finder, or, when it does not show the pc (this happens on and off, possibly a refresh problem apple...) choose go --> connect to server and enter smb://<pc's name or ip>
to find the ip, the easiest way i think is
start --> run --> cmd ->> ipconfig
Andrew
Message was edited by: Andrew Dicker

Differences in JCE policy files between java 1.4 and 1.5?

I'm using a app that needs JCE unlimited strength policy files to start. Attempting to start with limited strength policy files with Java 1.4 installed will give:
java.security.InvalidKeyException: InitVerify error: java.lang.RuntimeException: engineGetKeySize() is not supported by this cipher!
however, running the same app on java 1.5 with limited strength policy files does not give this problem. I've checked http://java.sun.com/j2se/1.5.0/docs/guide/security/jce/JCERefGuide.html#AppE and http://java.sun.com/j2se/1.4.2/docs/guide/security/jce/JCERefGuide.html#AppE and the maximum allowed keysizes are identical. Has something else changed in the JCE policy files between these java versions? Can anyone tell me what's going on?

Incubus wrote:
say I have a code that does:
public void StringConcat(){
int noOfIter = 10000;
for(int i = 0; i < noOfIter; i++){
String s = "String " + i + " Being " + i + "concatenated " + i + "using " + i + "String" + i + "Builder";
If I compile this in 1.4 ( i.e using javac -source 1.4); the decompiled code looks the same.
But if I do so in 1.5 ( i.e if I decompile the same code compiled using javac -source 1.5), this is how it looks:
public void StringConcat(){
int noOfIter = 10000;
for(int i = 0; i < noOfIter; i++){
String s = (new StringBuilder).append("String ").append( i).append( " Being ").append( i).append( "concatenated ").append( i).append( "using ").append( i).append( "String").append( i).append( "Builder").toString();
The above was the compile time optimization I was talking about.What makes you think that the decompiler is not the problem?
The ONLY difference between 1.5 and 1.4 in that case is that one uses StringBuilder and one uses StringBuffer. And StringBuffer is faster.
Just wanted to know, are there any other differences in compile time optimizations between 1.4 and 1.5.I suggest that you go look at the read me. And I also suggest that you become familar with byte codes and stop assuming that a decompiler is going to tell you anything.

Error when moving files between Sharepoint sites using 'content and structure' feature

Hi,
I am using Sharepoint Online 2013 on a mac computer.
I am trying to move files between sharepoint sites/libraries but because the "open with explorer" link does not work on mac computers, I need to do so using the 'content and structure' feature.
When I select a file to move and then select the destination site/doc library, i get the following error:
An error was encountered performing this operation.
Operation to Move '120207_Australia Post_Invoice.pdf' to '/Ops/internal/admin/General Admin' failed
No items were moved. Please remove 120207_Australia Post_Invoice.pdf from the selection and retry operation
Please help!
Thanks,
Kate

Hi Kate,
If you mean only one file "120207_Australia Post_Invoice.pdf" could not be moved, please compare this file to the other files moved successfully, check if there are some differences, like the content types, fields.
Also compare the source library and destination library, make sure they have the the same type of fields.
And you could have a try of moving this single file separately see if it could help, or as a workaround to download this file from source and upload to the destination library.
Since it is related to SharePoint Online 2013, we cannot see the ULS log for more information, I would suggest you post this issue in Office365 SharePoint online dedicated forum via the following link for a better assistance.
http://community.office365.com/en-us/forums/default.aspx
Thanks
Daniel Yang
TechNet Community Support

Mountain Lion won't display .MTS files from camera SD card in the finder

OS Mountain Lion will not show .MTS files from my camera SD card in the finder.
I don't want to play them. I just need to see a list of the files so that I can copy them off the card onto a hard drive. I know how to convert them.
I have a Panasonic High Def video camera that records .MTS files.
I understand how to convert MTS files for editing in Final Cut Pro. It is not a problem. I have been doing this with no problems using OS 10.7.5
I plug in my camera, and the SD card shows up as a hard drive in my finder. I click on the hard drive icon and it opens several folders. DCIM, MISC, PRIVATE.
I click on the PRIVATE folder and subfolders open. I click on the AVCHD folder, and then go down to STREAMING, and there are the MTS files. I select them and import them into BIGASOFT video converter and convert them to .MOV files, which I can edit in FCP.
So that works great in OS 10.7.5
Here is my problem:
On my new MacBook Pro with OS10.8.3 I plug in the camera. It reads the SD card.
I see the folder DCIM and I see the folder MISC. But the PRIVATE folder (where the .MTS files reside) shows up as a QuickTime icon. I click on that, but the MTS files do not show up.
I don’t need to play the MTS files. I don’t need to know how to convert them. I can do that.
I right clicked on the PRIVATE (not folder but QT icon) and selected "show package contents." That gave me another list, with an icon for AVCHD, but when I right clicked again and selected "show package contents" the MTS files would not appear.
I just need to be able to see as a list and copy them on to a hard drive. Why does Apple make this so hard?

STEP BY STEP INSTRUCTIONS TO RECOGNIZE AND IMPORT MTS FILES. (No help from Apple.)
After 4 frustrating hours and about 40 useless minutes wasted on Apple Support chat, I figured this out.
Okay, here are the steps to allow Mountain Lion to see your MTS files on a Panasonic camera SD card and import them:
Click on your camera SD card.
RIGHT Click on PRIVATE icon. (This used to be a folder, now it is a Quicktime logo.)
Pull down command for “Show Package Contents”
Click on AVCHD
Pull down command for “Show Package Contents”
Click on BDMV
Pull down command for “Show Package Contents”
Open the folder called STREAM
There are your MTS files. Select them and copy them to a folder on your hard drive.
Purchase some type of video converter (I paid 30 bucks for Bigasoft Converter and it works.)
Import the MTS files into the video converter and set the commands (This is several more steps, which you will have to figure out.) This will take quite a while for large, High Def files.
Save converted files to your hard drive.
NOW, finally FCP X will let you import and edit your files.
Thanks Apple for adding 12 steps where it should take one. “Log and Transfer” or IMPORT. You should fix this.
It took me about 4 hours of frustration to figure this out. Apple support chat service was no help at all. The girl in chat had no understanding of video files.
Thank you Apple, for hiding these files behind your Quicktime logo, thanks for adding extra steps and decreasing productivity. I've been using Macintosh computers since 1987. I would not own a PC, but Apple is not what it used to be. Why would you not just let the .MTS files show without hiding them?

Can I share files between dual-boot Snow Leopard and Leopard partitions?

Apparently one of the cool new features of Snow Leopard is its file system compression. That has me wondering though, if I want to have a single drive with two partitions and install Snow Leopard on one partition and Leopard one the other will I be able to mount the SL partition from Leopard and read/edit files without causing problems?
It seems like that would not be possible but I thought I'd throw it out here to see if anyone has tried.

As far as I can tell, Apple has applied compression to most of the system executable files in Snow Leopard. However they do not appear to apply it to data files for any applications that I have looked at.
Apples documentation for ditto (go to terminal and type "man ditto" at the prompt, without the quotes) states:
--hfsCompression
When copying files or extracting content from an archive, if the destination is an HFS+
volume that supports compression, all the content will be compressed if appropriate. >This
is only supported on Mac OS X 10.6 or later, and is only intended to be used in >installa-tion installation
tion and backup scenarios that involve system files. Since files using HFS+ compression
are not readable on versions of Mac OS X earlier than 10.6, this flag should not be >used
when dealing with non-system files or other user-generated content.

CIFS to transfer files between NW 6.0 SP5 and Windows 2008

I have an old server that is moving to Windows SBS 2008. I was trying to use CIFS to get the files over. I am not having much luck. I am able to get CIFS to work from a XP PC by going to the shared name and opening the directories.
I have tried to reset the NTLM security but it is grayed out. I am a Domain admin. I should be able to edit these policies.
I get a prompt to login but the login is the same as the login for the Windows 2008 server. I thought it would just open. They are on the same workgroup /domain. I tried it a couple times and it couldn't log me in.
My iManager is not working at the moment. I forgot how to get it started. I configured everything through ConsoleOne.
Or do you have any other ideas on how to transfer the data quickly?
Thanks,
Susan

On 21.01.2011 19:06, susantci wrote:
>
> Or do you have any other ideas on how to transfer the data quickly?
Install the Novell Client on the 2008 Server maybe?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Is it possible to sync files between OS 10.4.11 and ML?

Migration and Setup Assistant won't work, the OS' are too distant in technology. Syncing the PPC G5 to my new iMac was only possible via drag and drop(6 days for 700 GBs!!).
I'm hoping there's an app out there...?
TIA

No, there is no way to do it at this time. I don't know what Apple is playing at in this respect.http://www.apple.com/feedback/ipodtouch.html
mrtotes

QuickView, Preview.. etc. Can't Display PSD files

I've been having this problem for some time now - as far back as can remember with OS X.
When I try to view a psd file, (prior to Lep) in Preview or Xee, all I get is the transparent Alpha Channel - ie usually a solid blank neutral gray or checker board white and gray. And as of Leopard (and Snow Leo), this situation now includes Quickview. I get no actual image, or sometimes part of an image displayed, but never the full image that is displayed in PS or PSE.
The ONLY exceptions to this problem I have found is an ancient app called ACDSee v1.6.9 (2001) and Quicktime Player. Both display psd files perfectly.
The preferences to save Image Previews: Always Save, Icon, Full Size, Mac Thumbnail, Windows Thumbnail.
Am I saving psd files wrong somehow so that the default system apps can not display psd files properly?
BTW - this problem is completely consistent on EVERY system I have tried it on regardless of the OS X version (Tiger, Leo, Snow Leo) and Photoshop version (PSE 2, 4, 5, 6; PS 7, CS1, CS2).
Any help or suggestions would be greatly appreciated. This is a very irritating problem..
TIA

This isn't an issue or something you are doing incorrectly, PSD is an Adobe format that is not widely supported. You need to open it within your Adobe application, such as Photoshop.

How can i share specific applications and files between laptops

I just bought a McBook Air and I would like to share specific applications and files between my old MacBook Pro and the nw MacBook Air.

Try target disk mode:
http://support.apple.com/kb/PH3838
Other wise use a USB thumb drive or a HDD to transfer them.
Ciao.

WPA8.1 Feature to save and move files between folders and OneDrive Folders

Hi,
I would like to suggest to dev team a new feature to Adobe Reader on Windows Phone.
Today I was done a uggly workarround to save one PDF file on a OneDrive folder to send to my classmates. So I would like a feature to save and move files between folders on SD cards and OneDrive to keep my phone organized.
thank you for your time.

Here:
property aFolder : "a"
property bFolder : "b"
property cFolder : "c"
property dFolder : "d"
property eFolder : "e"
tell application "Finder"
try
set theLocation to the selection as alias
on error
set theLocation to (folder of the front window as alias)
end try
if not (exists folder aFolder of theLocation) then make new folder at theLocation with properties {name:aFolder}
if not (exists folder bFolder of theLocation) then make new folder at theLocation with properties {name:bFolder}
if not (exists folder cFolder of theLocation) then make new folder at theLocation with properties {name:cFolder}
if not (exists folder dFolder of theLocation) then make new folder at theLocation with properties {name:dFolder}
if not (exists folder eFolder of theLocation) then make new folder at theLocation with properties {name:eFolder}
set this_list to every file of theLocation
repeat with i in this_list
if (name of i) begins with "a" then
move i to folder "a" of theLocation
else if (name of i) begins with "b" then
move i to folder "b" of theLocation
else if (name of i) begins with "c" then
move i to folder "c" of theLocation
else if (name of i) begins with "d" then
move i to folder "d" of theLocation
else if (name of i) begins with "e" then
move i to folder "e" of theLocation
end if
set name of (the result) to items 3 thru -1 of (get name of (the result)) as string
end repeat
end tell
(98558)

HOW TO MOVE FILES BETWEEN FOLDERS ON APPLICATION SERVER

Hi ,
I want to move files between folders on application servers and also on presentation server.
Is any ABAP code available for it.
Can anybody help me out in this.
Waiting for reply.
Thanks & regards,
Nitin

I am also interested in this post. The FB ARCHIVFILE_SERVER_TO_SERVER workes fine for copying the file, however I also need to remove the file from its original location.
Does anybody have a sugestion on how I can do that (in coding).
Regards,
Minim

Sharing file between moutain lion and lion

To share files other MACs running Mt. Lion, you simply turn on AirDrop. Without an internet or intranet, can you, and how do you share files between MACs running Mt. Lion and Lion? How do you share files between Mt. Lion and any other older versions of OS X?

Here is a real-life example. My principal home machine is a 2011 Mac mini running OS X 10.8.3. My work laptop is a 2010 MacBook Pro with Lion. On the laptop, I enable File Sharing (afp) and export a project folder from the MacBook Pro and mount it on the desktop of the Mac mini.
Now, I can be more productive across two large monitors with the same applications and data; without concern for synchronizing final content. In my case, the work files remain on the laptop. Moving files between machines is a simple Finder operation.
WIthout a network, you can create your own with a length of CAT5(E) or better cable connecting each Mac Ethernet port. No need for a router in this (temporary) case. The alternative to this is a USB stick or where both machines have a reader, an SDHC data card.

Share all folders and files between two OSX partitions

So I have two partitions on my drive, one running 10.9, the other running 10.10 beta. I'm having a hard time figuring out how to make all folders read/write accessible from the other partition. I'd like to be able to access them easily, so that I don't have to change back over to 10.9 every time I want to watch a movie or access one of my files in one of my folders.
All of the info I can find online is totally focused on how to share files between, say, a windows partition and osx partition for example, all the drivers needed etc... and I'm having a hard time just figuring out how to set permissions or whatever is needed to just get those pesky red dots off my folder icons and have them open and available form either partition.
Thanks for any help.
For what it's worth, I've tried hitting "get info" on one of the folders I know I can't get to from the other side (basically, all the main folders in my user except Public), and Everyone has Read Access (I can't even get in for Read at this point from other partition so I'm guessing that's not the right place). My user on the other partition is same username.
Possibly a beta issue with Yosemite, or is there something I'm missing?

This is a screen shot of the shared folder between my 2 partitions (10.6 and 10.9).

How can I reduce the width between search results and the preview fly-out?

Hello, I am using a custom masterpage that reduces the overall width of page content but I am seeing an issue with my enterprise search site. The search results look fine but there is a large horizontal gap between the results and document preview window
(when mousing over a word/excel/powerpoint result). This means that the preview fly-out is hardly visible unless the user scrolls horizontally to the right. Can someone tell me how to set a reduced width between the results web part and the preview window?
Example:

I think the issue is with the Callout orientation, have you customized the page and if so then you can customize the callout.
check "beakOrientation" and you can set values like topBottom, leftRight as per your requirement.
see here for more information -
http://msdn.microsoft.com/en-us/library/office/dn135236(v=office.15).aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Difference in displaying RAW files, between Camera RAW 5.3 and default preview...

Similar Messages

Maybe you are looking for