Differences between AirPort Express and Extreme?

What are they differences between AirPort Express and Extreme?

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Similar Messages

  • What are the main differences between airport express and extreme?

    what are the main differences between the express and extreme base stations.

    In addition to Bob Timmons' link the main differences are as follows:
    Extreme has a slightly more powerful antenna (might not be true but from experience it seems to be)
    Extreme has USB HDD sharing
    Express has AirPlay
    Extreme has 3 Gigabit ports (don't be confused by Apple's page. Apple states 4 including WAN, 3 without WAN)
    Express is smaller
    Express has 10/100 Ethernet whereas Extreme has Gigabit

  • Difference Between Airport Express and Extreme?

    What may I ask, is the difference between the Airport Extreme and the Airport Express? And why is there a price difference between them. And would I be able to use it for surfing the web and print wirelessly on my Macbook? Which would be worth it for me, Because I'm sorta on a tight budget...

    That page does not explain what I think is the most significant feature difference. The Extreme has two Cat5 (Ethernet) sockets (abelled LAN and WAN) whereas the Express has only one (which serves as LAN or WAN depending on its configuration).
    If your ISP allows you only one IP address per account, you need a router with NAT to serve multiple computers. Both Extreme and Express have a router with NAT inside.
    With an Express, the Cat 5 cable socket is used up with the WAN (modem) input, so all your computers on the LAN must connect wirelessly. There would be no Cat 5 cable for the LAN.
    With an Extreme, however, your local computers may connect either wirelessly or via the LAN Cat 5 cable socket (through hubs as necessary).
    So, if you wish to add a Mac Book, say, to an installation that has one non-airport computer connected directly to the (Cable or DSL) modem, and the ISP will not serve more than one IP, you can connect an Extreme's WAN port to the modem and configure it translate that one IP via NAT to serve multiple local IP addresses on the LAN. Then you connect your non-airport computer to the Extreme's LAN port. Your Mac Book can then connect either wirelessly or also (with a hub) via the Ethernet LAN. You can't do this with an Express.
    A secondary feature difference is that the Express supports AirTunes to drive a mini stereo audio output socket on the case of the Express. It also supplies digital audio via optical fiber through the same socket. Either of these allows iTunes to play over your house stereo system wirelessly. You can't do this with an Extreme.
    --Gil
    12 inch PB G4 w/20 inch Flat Plane Array   Mac OS X (10.4.7)  

  • What's the difference between airport express and airport extreme?

    airport express and airport extreme? whats the difference??

    http://store.apple.com/ca_epp_5000967/product/MC414/airport-express-base-station
    http://store.apple.com/ca_epp_5000967/product/MD031AM/A/airport-extreme-base-sta tion

  • Diference between Airport Express and Extreme

    What may I ask, is the difference between the Airport Extreme and the Airport Express? And why is there a price difference between them. And would I be able to use it for surfing the web and print wirelessly on my Macbook? Which would be worth it for me, Because I'm sorta on a tight budget...

    Hi SMLaracy:
    The AE offers Wireless access and/or Airtunes and/or a USB printer port and WDS with a compatable WDS basestation.
    http://www.apple.com/airportexpress/
    The AEBS offers Wireless access with an additional LAN port (to connect a wired computer or switch), a USB printer port and a built-in modem.
    http://www.apple.com/airportextreme/
    I hope this helps!

  • What is the difference between AirPort Express and AirPort Extreme?

    Hi everybody!
    Here is my question: I'd like to get a portable (Mac of course) and I don't know which type of WiFi base I should buy, Express or Extreme? What is the difference between them?
    Thank you.
    Goldor

    Hello Goldor - sorry you've had to wait!
    The Airport Extreme Base Station and Airport Express are really quite different in what they are intended to do. Airport Express without a base station or modem/router already installed has limited function; it's really an add-on. So if you are starting from scratch you will first of all need a fully functional base station to connect you wirelessly to the internet. Once you have set up your network you can use an Airport Express to add functionality in several ways. The best plan is to visit the online AppleStore and read about the products there.
    However it should be pointed out that you don't HAVE to choose an Airport Express base station, it's only Apple's take on the technology and there are many more around (and a lot cheaper too!). Netgear, Linksys, Buffalo all make popular wireless products which will work happily with the Mac.

  • Is there a real benefit between airport express and extreme if you do not have the platforms with ac norm?

    Is there a real benefit between airport extreme vs express if your pc is not in the same ac norm?

    Not a lot, unless you plan to connect to the AirPort using a wired Ethernet connection, or connect a hard drive to the AirPort.
    The Ethernet ports on the AirPort Extreme are 10 times faster than the ports on an Express. You can connect a hard drive to the USB port on the AirPort Extreme. You can't on the AirPort Express.
    There are more wireless antennas in the "new" AirPort Extreme and they are located up at the top of the "tower". That might improve things a bit as well.

  • Any software differences between new airport express and extreme?

    I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
    The only difference I can see is using the USB for hard drive use.
    Also, do you think the performance will be similar.  I know the time capsule actually rated slower than the extreme even though they use similar hardware.

    You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

  • Problems with Airport Express and Extreme

    I have tried to set up Airport Express and Extreme.  Both proceeded normally in the Air Port Utility until the final stages.  Then it said it couldn't find the devices. When I tried again (many times), I couldn't even start the process, even though it did that the first time for both.  I'm stumped.

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • What are the main differences between Signal Express and Labview?

    National Instruments provides a matrix so one can quickly compare the
    various versions of Labview but no comparison of Signal Express with
    Labview. Hence how does Signal Express compare with Labview? What
    are some of the things one can do with Labview one can't do with
    Signal Express?
    Howard

    hrh1818 wrote: Which version of Labview are you referring to? I don't consider the graphical version of Labview to be a full featured programming language. LabWindows/CVI is by a long shot a lot closer to being a full featured programming language than the graphical version of Labview.
    Howard,
    You clearly don't know what you are talking about. There is no "graphical version" of LabVIEW, there is just LabVIEW. Click on the article "Is LabVIEW a general purpose programming language?" written by the Jeff K. for some easy reading from a few years ago. It is all still true (except that object oriented features and recursion have been added in recent versions).
    One of the main points at this years NI-week was the discussion of how processor development is switching more and more to multicore designs  to improve performance because a simple boost in clock frequency is becoming more difficult. Linear, text based code is not well suited to take advantage of multticore design, while the dataflow based LabVIEW programming language automatically scales well to multiple processor cores, without any need to rewrite older code. I would say that only LabVIEW is futureproof in this respect. LabVIEW programmers are not wimps that are simply too stupid to write text based code. LabVIEW is not a toy language for people that don't want to learn a "real" programming language.
    LabVIEW is arguably the best programming language in terms of getting things done! I've never felt limited with LabVIEW and my programs often don't even have anything to do with data acquisition or instrument control. The difference between text based code vs. LabVIEW is like "DOS vs. Windows", "Radio vs. HD television". "Trilobyte vs. Homo sapiens" (sorry Putnam ). Text based code is monochrome, archaic and outdated and its linearity imposes unecessary constraints on the programmer that can only be (partially) overcome by wasting even more time throwing even more code at it.
    Sure, a seasoned text based programmer will initially have problems adapting to LabVIEW, just because you would need to adapt to and embrace the power of dataflow and not try to make a literal translation of the text code to LabVIEW, retaining old habits. If you get stuck, come back and ask here in the forum.
    You were looking for object oriented features and failed. All you need to do is a quick site search. All the information is out there. Just because you cannot find it in the first five sentences of the glossy brochure does not mean it does not exist. Maybe you want to read one of the application notes such as:
    LabVIEW Object-Oriented Programming: The Decisions Behind the Design
    In general, you should avoid judgement until you have all information. Your opinions seem quite biased and superficial and not really based on hard facts.
    Initially you asked about the difference between signal express and LabVIEW.
    hrh1818 wrote:
    > What kind of measurments do you want to do and what kind of requirements do you have?
    > You can also see for yourself and download evaluation version of both.
    No thanks, there has to be a better way to get an answer to my
    question than get involved in a two month study project.
    If you would answer the first question quoted above, we could certainly help you with the decision. Isn't that the main purpose of this thread?
    You can also contact your local LabVIEW Field Engineer to go over your requirements and help you make a decision. They usually know their stuff!
    Message Edited by altenbach on 09-02-2007 11:51 PM
    LabVIEW Champion . Do more with less code and in less time .

  • Questions about AirPort Express and Extreme!

    I have BT Infinty and the hub is situated in the living room. What I want to do is extend the wi fi to my room which is around 10 metres away.
    Are you able to connect the AirPort Express to the network and then create a network for the AirPort Express for my MacBook Pro to connect to?
    I have two options and questions
    1. Buy a AirPort Extreme and replace my BT hub with that. Then use an AirPort Express to extend the wi fi. But when you extend the wi fi does it mean that when I search for a wireless hotspot from my Mac I connect the the AirPort Express? Or is there a way of making the AirPort express to have a different name?
    2. Use my Bt hub and buy a AirPort Express and connect it to my Infinty Connection. BUT is there a way of making a hotspot for the AirPort Express for example
    my Infinity connection is named Bt-Infinty2356
    I use the AirPort express to connect it and extend the wifi
    THEN is it possible to make a hotspot named "AirPort-Express-Muppet" for me to connect from my Mac?
    Thanks

    I have no experience with the "BT Infinity Modem" and "BT HomeHub", but I assume that they are two separate units?
    If yes: connect the modem direct to the Extreme by ethernet cable.
    If it is a "combined" unit: connect the Extreme by ethernet cable to one of the ethernet slots on the hub.
    In both cases set the Extreme to "Create a wireless network".
    Use a Airport Express to "extend a Wireless Network", and extend the Extreme.
    Do not expect the Airport Express to extend the BT hub wireless network, because it will not work.
    In both cases you have two wireless networks: one from the Hub and one from the Extreme.
    Off the record: I have the same situation in France with the "Livebox" (Orange) that is connected to a Netgear WiFi router: two network: the Livebox is just that, the Netgear is "relayed" through Netgear Routers (Switches) to five areas in the "house". The same in Switzerland, but there I used Extreme and Express units instead of the netgear units.
    The Hiome Hub should work fine connected to the modem by cable, and the other network also by connected to the cable. Do not mix the different brands: trouble.

  • Using Airport Express and Extreme Together

    I have the old Airport Express and have just bought the latest Extreme. I'm sure Extreme will work fine with my iMac but am not so sure it will work with my G4 Powerbook as it does not have the recommended software requirements. Is there anyway I can setup a network using both the old Express and the new Extreme?

    Welcome to the discussions!
    Your old AirPort Express is a "g" wireless device while your new AirPort Extreme is a newer and much faster "n" wireless device.
    If you are asking if you can use your old AirPort Express to "extend" the wireless from the AirPort Extreme using wireless only, the answer is yes....BUT....your new AirPort Extreme will drop down to old "g" wireless levels if you do this.
    The setup procedure for this is quite difficult and frustrating for many users. To get an idea of what is involved if you want to try this, see this link for the procedure:
    http://discussions.apple.com/thread.jspa?threadID=2355832&tstart=0
    IF...you are able to connect the AirPort Express to your AirPort Extreme using an ethernet connection, the setup will be much easier to accomplish and your AirPort Extreme will maintain faster "n" speeds on the wireless. Post back for more details if that is a possibility.

  • Airport Express and Extreme both having timeout issues once every few days.

    I have both an Airport Express and an Airport Extreme in the house (one on each side of the house), and for the last few months, we have been experiencing timeout issues with both. About once every few days, my computer (or any other computer here - all Macs) will lose connection to the hub. When I try to reconnect in the Wifi menu, it says "Connection timed out". Also, on my iPhone, when I try to connect, it says "Unable to connect".
    All this takes is a quick restart of the Airport (just pull the power out and plug in), but this is VERY frustrating. I've updated to the latest firmware... I'm not sure what else to do.
    Any ideas?

    Ok, thanks for clarifying that for me. I suggest starting by reviewing the following AirPort User Tip around the details for best base station placement. Let's see if this will help increase the bandwidth performance of your extended network. Most likely, due to combination of distance and Wi-Fi interference, you may not be getting the best bandwidth possible. Please post back your results.

  • 3 powerline adaptors with airport express and extreme

    Hi all,
    I am currently using two airport express and 2 TP-LINK powerline adaptors to create a "roaming" network, however i would like to add another powerline adaptor and an airport extreme to my network.
    Modem -> Airport Extreme in the living room with an ethernet cable plugged into the powerline
    1st Airport Express plugged into the 2nd powerline adaptor
    3rd Airport Express plugged into the 3rd powerline adaptor
    so my question is will the above setup work? or do i need to connect another powerline adaptor into the main Airport Extreme making the whole network use a total of 4 powerline adaptors? however if only a total of 3 powerline adaptors are required, would the network be confused and render the whole network useless?

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Difference Between Application Express and XE

    Hello
    I am new and would like to know what is the difference between Application Express(Apex) and XE?
    Is XE a standalone version and Apex is more like an enterprise editiion?
    Thanks

    read on http://www.oracle.com/technology/products/database/application_express/html/apex_and_xe.html
    Oracle Database 10g Express Edition (Oracle Database XE) includes Oracle Application Express (Oracle APEX) release 2.1, a declarative, graphical development environment for creating database-centric Web applications. Oracle APEX is installed in Oracle Database XE as the primary tool for managing the database and building Web-based applications. The majority of the administration tasks of Oracle Database 10g Express Edition can be performed using the administrative features of Oracle APEX, such as monitor database activity and manage database users, storage, memory and database objects. The simple Web-based interface enables users with minimum Oracle experience to easily manage the database. Application Express is pre-installed and fully configured, and it is immediately available after installation of Oracle Database 10g Express Edition.
    Is XE a standalone version and Apex is more like an enterprise editiion?XE is oracle database (free) it for test or using on limit (to 4GB of user data, use up to 1GB of memory, and use one CPU on the host machine)
    APEX is application (Web) can integrate on Oracle Database Enterprise, Standard and .... RAC
    Edited by: Surachart (HunterX) on Jun 15, 2009 6:03 PM

Maybe you are looking for