Different color since SAPKA70104

Hi,
i have a problem with the color in the cell of the table.
Since SAPKA70104 the color is different to SAPKA70018.
Have anybody the same issue and maybe solved the issue?
Thanks
Regards,
Markus

You are probably running the SAP_TRADESHOW_PLUS theme in your 7.01 system. This new theme matches the Signature design and has some color and gradient changes from the older SAP_TRADESHOW theme.

Similar Messages

Why don't recently viewed websites show in a different color anymore?

Yesterday I updated to Firefox 7.0.1, and now my recently viewed websites no longer display in a different color after viewing a website and going back to the original list of websites. I still want to see which ones I have already looked at when researching. Can you tell me how to get this feature back again?

If you are talking about the color differences between visited and unvisited in the links on your webpages then that that would be affected by any of the following:
# changing the link colors in your Tools > Options > Content > fonts & colors: "Advanced" for which I have blue for Unvisited and magenta for Unvisited links. I have all three items check-marked "Use system colors:, "Underline links:, and "Allow pages to choose their own colors instead of my selections above".
# Loss of history data, such as clearing of your browsing history
#* http://img232.imageshack.us/img232/4928/clearcachew.png
# Private browsing ("Ctrl+Shift+P") will not mark any links as visited, same would apply to permanent Private Browsing ("Always use private browsing mode") in Tools > Options > Privacy
#* http://img232.imageshack.us/img232/4928/clearcachew.png
I left out the link on the following and have added it, but since the above answered the question, I'm changing this last part to a footnote.
None of which would be directly related to updating Firefox, but at such times the localstore.rdf file in you profile may be affected (corrupted), and changes made to your toolbars and options will not stick.
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Plot different colors for thresholds above, in range, and below

I am working on a project that reads data from a com port and graphs the data. For one set of data, I need to check to see if the data is above/below a threshold. I would like the color for the data that is in between the upper and lower thresholds to be a certain color, and the data that is above or below to be to be a different color than the safe range. I have figured out how to get either the above or below to work but not at the same time. Here is an example vi that depicts what I have done so far but is simplified to the extent you do not need to receive any data. Any help on this would be appreciated.
Attachments:
one_line_two_colours.vi ‏53 KB

I add some code to your solution using the same principle (adding NAN-lines)
How many colors you want? Just add thresholds in the array
Still room for improvements
look, there are gaps between the lines, and the -10 should be -INF
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
one_line_n_colours.vi ‏140 KB

TabNavigator, different colored tabs?

Is it possible to set a different color (tab color and
matching background) for each tab in a tab navigator?
Thanks!

quote:
Originally posted by:
ntsiii
One this I see is that you shuld have:
AppTabs.selectedIndex = openDeals.length - 1;
since selectedIndex is zero based.
Tracy
The reason I'm using openDeals.length is because the static
tab takes up index 0 so I need to start at 1 for my new tabs. That
was purposeful. I'll try the creationPolicy and see what
happens.

Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
Regards.

BarSeries with Different colors

How can i set different colors for my BarSeries which will be
based on another array of data?
Something Like:
first bar - ===red====blue======yellow====green==
2nd bar - ===blue===green======gray===
3rd bar - =======red=====yellow====gray===
on my yAxis is date by month and on my xAxis is # of tasks.
different colors are for the Names:
Name1=red
Name2=blue
Name3=yellow
Name4=green
Name5=gray
Name ... = .another color...
since the list of names is dynamic, i cant define a specific
bar series for each. My barchart type is already set to stacked so
it displays the total # of tasks per month.
Any help, tnx!!!

"wiser4me97" <[email protected]> wrote in
message
news:g90810$j52$[email protected]..
> How can i set different colors for my BarSeries which
will be based on
> another
> array of data?
>
> Something Like:
> first bar - ===red====blue======yellow====green==
> 2nd bar - ===blue===green======gray===
> 3rd bar - =======red=====yellow====gray===
>
> on my yAxis is date by month and on my xAxis is # of
tasks.
> different colors are for the Names:
> Name1=red
> Name2=blue
> Name3=yellow
> Name4=green
> Name5=gray
> Name ... = .another color...
>
> since the list of names is dynamic, i cant define a
specific bar series
> for
> each. My barchart type is already set to stacked so it
displays the total
> # of
> tasks per month.
http://livedocs.adobe.com/flex/3/html/charts_formatting_07.html

Reading ProRes4444 Quicktime between AE CS5.5 & Nuke 7.0v8 produces different color results

Please read this first. THIS IS NOT A GAMMA ISSUE! I am well aware of the difference between RGB v YUV & 0-255 v 16-235. It is not a RGB v YUV problem or a 0-255 v 16-235.
I am experiencing a noticeable color shift within highly saturated files. I am specifically noticing a difference in REDs. At least witin my current project.
Files are Alexa C-Log. Edited within FCP. Graded by BaseLight within FCP. Comped within NUKE. Titles added within AE. Sent back to FCP timeline.
Here is what I cannot explain. I can roundtrip the file within Nuke. I can Read a ProRes4444 file which I can then render out as multiple formats, i.e. QT ProRes4444, EXR, TIFF, DPX. I can bring those files back in and create a difference matte which produces pure black (well close enough, small differences in gamma when elevated astronomically). So apples to apples, color space matches, gamma matches.
Now when I bring these rendered files into AE the image sequences display a different color than the ProRes4444 QTs. ALL the image sequences match and ALL the ProRes4444 match. I have tried creating a project with an unmanaged color space as well as a traditional rec709 project color space. I have also tried intrepreting the PR4444 files different color profiles. NO amount of variation will allow the PR4444 files to match the image sequences. I am partial to image sequences, BUT, ProRes files have become standard file types and I would like to resolve this issue.
Any thoughts?
I have tried this:
http://blogs.adobe.com/aftereffects/2009/12/prores-4444-colors-and-gamma-s.html
and this:
http://blogs.adobe.com/aftereffects/2010/05/prores-4444-and-prores-422-in.html
Please observe . . . .
TIA
-M

I have more results after further testing.
Running OS X 10.8.4
AE 10.5.0.253
K5000 GPU
My AE project is setup as a 16bpc, HDTV (rec709), Blend Colors Using 1.0 Gamma, Match Legacy After Effects QuickTime Gamma Adjustments, Compensate for Scene-referred Profiles.
I import a FCP 7 generated QT ProRes4444 file. The file is rendered as YUV Full Precision with Super-Whites. In an attempt to round trip the file, I rendered the singular file with no effects back out as a ProRes4444 file with rec709, sRGB or Preserve RGB color profiles. Once imported back into AE, each of these 3 files matches the original identically. Quite well actually, even when I turn on difference mode and crank the gamma, they hold up really well. Nothing perceptually different here.
NOW, when I render out as DPX, EXR or TIFF, I get a completely different result. EACH image sequence imports identically, so DPX matches EXR matches TIFF. BUT they are all identically different than the original. Once again there is a color shift. NOT a gamma shift, a HUE shift.
I am rendering each file as a rec709 and importing as a rec709.
What gives?
Here is the kicker, when I switch to my windows box (WIN7 SP1), then open my AEP file. The colors match identically across all files & formats!!! I literally set my OS X AE comp to solo 2 layers on difference mode. There is a clear difference. When I open the same file within WIN7, pure BLACK. NO DIFFERENCE. Holy crap this is alarming. Side note, still have the hue shift within NUKE across platforms but it is consistent.
WIN7 64bit SP1
AE 10.5.0.253
GTX680 GPU
I am not going to blame Adobe, since I am almost certain this is an APPLE issue. I would like to ask the Adobe AE Team, what value is AE reading that Nuke is not? Is there different QT importers?
Thanks,
Matt

Safari title bar has two different colors

Ever since installing Mountain Lion, Safari's title bar is two different colors: behind the title of the page, and the bookmark bar are both dark grey:
I deleted .plists and whatnot, and that didn't work. Also, I created a new user profile, and the colors are correct. Help!

After doing some digging, I found this:
https://discussions.apple.com/thread/4141536?start=0&tstart=0
and this:
https://discussions.apple.com/message/19038993#19038993
Also, I enabled the debug menu in Safari and clicked "Use Buffered Windows," and this is the result:
Compared to my girlfriend's computer (brand-spankin' new, right out of the box), this still isn't 100% correct, but it is close.
Also, I checked console (after I unchecked "Use Buffered Windows"), and it says "Invalid unbuffered shadow parameters." Does anyone know what that means or how to fix it?

I have a iPod touch 5th generation and when i turn on the device, its white screen with black lines and different colors

I can turn off the device naturally. But when i turn it on it shows all white with black lines and different colors. Is my LCD screen broken? If it is, can apple fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not covered by warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price

Need to display different colors for Actuals and forecasting values in WAD

Hi Gurus,
My requirement in the report is, I need to display different colors for particular values like Actuals(say value type 10) and for forecasting values(say value type 20) , and data will uploaded from flat file.
Scenario : If I upload the data for March Month, I receive actual values upto March(Jan to March month) and from April to Dec(Forecast values with value type 20), Every month I will be getting file and similarly for subsequent months, i will get current month actual values and forwarding months forecasting values,
Now , my requirement is, When ever i execute the Report, Say if i execute for April Month, Upto April( Jan to April for actual values should be displayed in one color) and from May to Dec ( forecast values should be displayed in different color).
I had tried with following options like exceptions and could not display , as it runs based on key figure values where as my requiremnet is based on the CALMONTH , i need to show different colors for both actual and forecast values.
Kindly, help me out from this,
Thanks

Hi,
it is not necesseary that you need to do that in WAD , you can do the same in BEx platform, Since WAD is build above the bex reports. so automatially any changes done in Report will be replicated in WAD
Go for Exceptions in Bex. Give some range for Actuals and Forcasting at the creation of the exception.
if you do those changes in BEX automatically it will replicate in the WAD.
for more information please read this link
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
hope this will solve your problem.
Santosh

I have a question about the calendar on the ipad2. I have multiple calendars in different colors. Some of the events are filled in with color. Others are just listed with a colored dot in front of the event. Any ideas why events ar showing up differently?

I have an ipad2 and my question is about the calendar. I set up multiple calendars with different colors. Some of the events show up in filled color. Others only show with a colored dot in front of the event. I can't figure out why some show up one way and others show up differently? Any thoughts?

On mine the ones that show on a coloured background are all-day events, the ones with dots and just timed events.

Not able to color different rows with different colors in a column of table

Hi,
I am trying to to display different rows with different colors in a column of the table based on some decode condition.
I have gone through the following threads :
Can we colour the rows in the column of a table
Changing Color of a value in a column
This is what i have done :
1.Added the following code to custom.xss(changed the name to Custom.xss as suggested in one of the above threads) --- in path ---- jdev\myhtml\OA_HTML\cabo\styles
<style selector=".1">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#008000</property>
<property name="text-indent">3px</property>
</style>
<style selector=".2">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#FFFF00</property>
<property name="text-indent">3px</property>
</style>
2. Sql query of the VO is :
select comments,role ,decode(role,'REQUESTER','1','2') Colorattr from xxat_sars_action_history where request_id = :1 and event_name = :2 and action_code <> 'PENDING'
order by sequence_num desc
3. Coded the following in the process request of the controller:
OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("CommentsTB");
OAMessageStyledTextBean roleBN = (OAMessageStyledTextBean)webBean.findIndexedChildRecursive("role");
OADataBoundValueViewObject cssjob = new OADataBoundValueViewObject(roleBN,"Colorattr");
roleBN.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, cssjob);
where 1 and 2 form the colors ( i have even tried with 'Red' and 'Yellow'...as it was not working replaced with 1 and 2)
4.The query returns data fine with corresponding 1 and 2 values.
But different colors are not getting reflecting on to the UI.
I am testing this on my local jdev.
Please do let me know if i am missing something.
Thanks ,
Sushma.

Any Clues please.....
Thanks,
Sushma.

How to Create Excel File in Background processing with different colors

HI All
I am trying to create Excel file in background & send it to user through e-mail, this i could acheive using fucntion module SO_DOCUMENT_SEND_API1, but here my requirement is i want to put different colors to columns of excel & this should happen in Background processing,
Initially i completed above requirement by using HTML type of document with attachment type 'ALI' & formatted output using write statement & used colors, after that i took this o/p using save_list function module & then table compress...etc.
but i don't know how to achieve same if we need o/p in excel as size of object of excel file is less than that of HTML
I am thankfull to everybody who will help me.
Regards
Lokesh

Lokesh,
Iam also trying to populate my text file with colors as an attachment . If you know this please let me know.

Different colors for the aggregation in the report

Hi
In my BEx report I require to show the aggregation in different colors.
That is suppose my report has 3 characteristics and 2 keyfigures. When the 'Result' appears for characteristic1 it should be shown in blue color(not specific) and when the result appears for characteristic2 it should be shown in red color and when result appears for characteristic3 it should be shown in green color and similarly.
Has any one already implemented this?
Please help..
Thanks and Regards,
Satya Raj Kumar.

Hi,
Many thanks for your reply.
But this is not what I am looking for.
I require the result rows in different colors.
Suppose the result row is based on aggregation of Characteristic 3 then the result row should appear in blue color.
Suppose the result row is based on aggregation of Characteristic 2 then the result row should appear in green color. and so on.
Please help on this.
Thanks and Regards,
Satya Raj Kumar.

Different color text in text area???????

hi,
i am working on applet in which i want to show different color text in text area????????
could any one help me

I'm not sure it replies, we have developed an
editorkit for the JEditorPane for colorizing a
text with a property file describing a grammar. We
provide in the packaging a trivial sample
for coloring a java syntax in an applet.
http://www.japisoft.com/syntaxcolor
And of course it also requires that you buy it, and a.brillant forgot to mention that a.brillant has a financial interest in this product.

Different color since SAPKA70104

Similar Messages

Maybe you are looking for