Different pricing procedure between CRM and ERP

Hello,
we`re using a CRM system which is connected to a ERP system. As not all pricing conditions from ERP are needed in CRM (an in addition the ERP pricing procedure is very complex), we would like to use a different (with less conditions) pricing procedure ind CRM.
But now, when we transfer an order from CRM to ERP, the pricing procedure from ERP gets downloaded into the order in CRM and the prices are lost. Therefore I have 2 questions:
1. Is it not possible to have a different pricing procedure in CRM than in ERP?
2. Is it possible to stop transferring the pricing procedure from ERP back to CRM when transferring orders?
Thank you in acvance for your help
Jan

Hi, Jan.
1. Is it not possible to have a different pricing procedure in CRM than in ERP?
Yes. You can use different  pricing procedure for you business documents.
We use this for quotation management with inergation CRM-ERP.
But, You must use same Condition Types and other objects.
Denis.

Similar Messages

  • Is it possible to have different pricing procedure for SO  and invoice?

    Hi,
    Is it possible to have different pricing procedure for SO
    and invoice?

    Hi Kiran35086 
    --Yes you can have it.But it is based on the business requirement
    --Create 2 Document pricing procedures & assign one in VOV8 & another in VOFA
    --In Sales Document VOV8 you maintain different  document pricing procedure Ex A
    --Go to VOFA & select your billing document type in Account assignment/pricing assign the document pricing procedure.EX- B
    --Create condition records in VK11 for the condition types which are included in the pricing procedures
    --Maintain pricing procedure determination in OVKK with 2 different Document pricing procedure & save it
    --When you raise SO in VA01 you will find one pricing procedure & when you raise billing in VF01 you find another pricing procedure in conditions.
    Let me know if your problem is solved
    Regards
    Pradeep

  • Basic question regarding Contract data exchange between CRM and ERP

    Hi,
    1) At a very general level, can somebody tell me via what technology are contract documents exchanged between CRM and ERP? IDocs, RFC modules or proxies?
    2) Is it possible to sychronise changes in a contract, e.g. if the contract is changes in the ERP system, those changes are auotomatically updated in the CRM contract?
    3) Can somebody point me to any documentation on this?
    Kind Regards,
    Tony.

    contracts are exchanged between CRM ans ERP ssytem ny RFC and FM , you use object SALESCONTRACT for this,it is possible to synchronize changes between both the systems

  • Link Table between CRM and ERP

    Hi Experts,
    Does anyone knows the link table between CRM and ERP for Contact Person (Buss Part) CRM and Contact Person ERP.
    In my customer system, contacts are automatically duplicated in CRM.
    When you make a change in ERP, this change is automatically done in CRM.
    So I suppose that there is a table between the both systems to find the corresponding number...
    Thank you for your help and hope my English is good enough to understand :o)
    Best regards,
    Luis.

    Hi Micky,
    Thanks for your answer.
    Unfortunatelly, number are differents...
    I move this question to CRM forum ;o)
    Kr,
    Luis.
    This has been solved in this thread:
    Link Table between CRM and ERP
    Edited by: Luis Loredo Marino on Feb 24, 2010 1:24 PM

  • Communication between CRM and ERP for E-commerce scenario

    Question more on lines of system architecture design.
    We are planning to implement CRM E-commerce and wanted to find out more detail about the communication between CRM and ERP systems. Do they need to communicate in real time for this application, or is it mainly initial and delta loads? Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
    We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version?

    Hey Sanket,
    Q 1 . Do CRM and ECC need to communicate in real time for Ecommerce application, or is it mainly initial and delta loads
    Ans. CRM and ECC communicate using RFC connections which further uses TCP/IP as the protocol.The communication can be both  real time { delta loads} or offline {initial download}.
    Q2 .Is the amount of data exchanged huge ( necessitating both systems to be on the same network, or can they be on separate geographical locations )?
    Ans. The amount of data can be huge hence its preferable that both systems to be on the same network.
    Q 3. We also understand that E-commerce can also be done only using ERP. How does that differ from the CRM version
    Ans.Theres no difference functionally  but technically the application connects to the ECC system using JCO to execute all the RFC enabled function modules.
    Warm Regards,
    Sumit

  • Bp master data match between crm and erp

    hi gurus,
    is there a match list indicating the customer master fields in erp and in crm.
    which field can be synchronized to crm? which field is the target one?
    can gurus help provide? thank you.

    Hi Daniel,
    I am not sure if there is a list for that. But, the mandatory fields in R/3 should be same as the mandatory fields in CRM for the data transfer to be successful. You can set that up in transaction OVT0.
    Regards,
    Shwetha

  • Is it possible to have different pricing procedure at sales order level and

    Hi SD Gurus,
    Is it possible to have different pricing procedure at sales order level and invoice level?
    if is it possible to have different pricing procedures at sales order level and invoice level could you please tell me the steps how i have to do?
    Thanks & Regards,
    Nivas

    Hi,
    Yes you can able to map two different pricing procedure for order and invoice level
    You can achieve it through by document pricing procedure and assign it in document type
    In VOV8  assign document pricing procedure A for order type
    in VOFA assign document pricing procedure B for billing type
    Keep customer pricing procedure common
    Then in OVKK assign pricing procdures
    Kapil

  • Diff pricing procedure for invoice and sales order?

    can u please help me out in the following question
    Is it possible to have different pricing procedure for sales order and invoice?

    hi venkat,
    yes we can very well have different pricing procedures for order and invoice. for the combination of
    sales org + dist chan + div + <b>document pric proc</b> + cust pric proc --- > Pric Proc.
    we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
    Hope it helps. Pl reward if useful.
    Thanks
    Sadhu Kishore

  • Replication of Pricing Conditions between ECC and CRM

    Hi All
    I have a couple of queries regarding replication of pricing information between ECC_CRM. We maintain the filter settings for Pricing procedures, access sequences and condition types in the object DNL_CUST_CND_PR, and accordingly these are replicated from ECC to CRM. My Questions:
    1. If some pricing procedure is created in CRM and this needs to be replicated to ECC, Can we achieve this?
    2. Would DELTA be active on these objects, in the sense if some changes are made to a pricing procedure in ECC, would they flow automatically to CRM?
    Thanks in advance
    Best Regards,
    Ram Sushanth

    Hi Chandra and Swaroop
    Thanks a lot for your response.
    From your replies, now, this is my understanding (Pl correct me if am wrong)
    1. Replication of Pricing Procedure from CRM to ECC is possible.
    It would be of great help if you could elaborate on the procedure to do so or provide pointers for documentation in this regard.
    Because, for replication from ECC to CRM, we perform an initial load on the object DNL_CND_CUST_PR or DNL_CUST_CNDALL.What is the object that we need to execute from replication from CRM to ECC?
    2. DELTA would be active only on condition records, but not on Condition types and Pricing Procedures and if any pricing procedure is changed in ECC, we would need to perform Initial Load again.
    Thanks in advance
    Best Regards
    Ram Sushanth

  • Different DOCUMENT PRICING PROCEDURES in SalesOrder and Billing

    Hi Experts,
    Can you please explain how system reacts and how it calculates PRICING if we maintain different DOCUMENT PRICING PROCEDURE in OR and different DOCUMENT PRICING PROCEDURE in F2?
    Thanks,
    Kanna.
    Edited by: kanna palle on Aug 29, 2008 3:17 PM

    It will use the dopp as the absis to derive the pricing procedure to calculate.Hence the pricing for Order and billing will be totally different. It depends on what pricing procedures you have maintained at both levels and if the conditions therein are different and for which conditions are different then it will have very little meaning though pricing will be calculated. Copy control would have no meaning then.Hence you should ensure consistency of data when redetermining pricing as well.
    regds
    Jude

  • Copy prices between documents assigned to different pricing procedures

    Different pricing procedures are assigned to sales document & Billing document -- however some of the condition types are common in the two procedures-- would the pricing get copied for the those common conditions if the copy control is set to copy (pricing type "G")
    Appreciate your responses.

    Pricing Type = G is to copy the pricing and redetermine taxes so it should based on if that is all in the copy control. We do not have a different pricing procedure for both, we just copy the values from the order and/or the freight document.
    When I have these types of questions, I always run a test order in dev and it answers many questions. Good Luck.

  • How does the integration between CRM and SD occur

    How does the integration between CRM and SD occur?  Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
    So, if I create an order or quote in CRM how is it then created in SD?  Or do they share the same data store.
    thanks

    Hi John,
    Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
    http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
    Also you can check the best practice guide for CRM 2007 there you have plenty of information
    http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
    Hope this help,
    Regards,
    Ramon

  • Credit note is having different pricing procedure

    Hi All,
    We have an issue with the Pricing procedure determination.
    While creating Return order, we are creating with reference to standard Invoice.
    Document pricing procedure in the Standard Invoice and Return order are different.
    We maintained different pricing procedure for Return order. But system is copying the Pricing procedure from Invoice into the Return order.
    We are creating Return credit note with reference to Return Delivery.
    Here in the Credit note, Pricing procedure is different, that is actually what we maintained in OVKK.
    But in VTFL, Pricing source field is maintained as "Order" only.
    Does this setting not enough to copy the pricing procedure from the Return Sales order.
    We need the same Pricing procedure what is available in the Return order to be copied into the Return credit note.
    Advice me what standard settings to be done to achieve this.
    Regards,
    Rajesh Lingadurai

    Dear Manoranjan,
    Thanks for the reponse.
    Return order part is clear to me. As per standard, system is copying the Pricing procedure from the Invoice.
    But I am not clear about Return Credit memo i.e. Billing part.
    As I explained above, I believe the Pricing procedure will be redetermined in the Billing only when the Document Pricing Procedure in the Billing is different from the Sales document type.
    But in my case, Document pricing procedure is same in Sales document type and Billing document type, but why system is redetermining the Pricing procedure in the billing level.
    As per our requirement, system has to copy the Pricing Procedure and Condition values whatever is determined in Return order level into Invoice level.
    Is it possible to copy the entire pricing from Sales order into Billing even if it is Delivery related billing.
    I hope it is clear now.
    Regards,
    Raja Durai

  • Credit Memo Req. with different Pricing Procedure than Invoice

    Hi
    I need to create a credit memo req. from invoice reference - but both should have different pricing procedures. I have assigned different doc. pricing proc. to the new credit m. req. and maintained proper pricing proc. determination. Also in copy control at item cat. level I have maintained pricing type as B. Still the invoice pricing proc. is being copied. Am I missing out something ?
    Thanks in advance.

    Hi,
    sorry could not update early. the suggestions were already implemented. it should have worked but still the problem was there. couldn't find out the exact reason.
    i needed to create the credit memo req. in background th. BDC.
    finally what i did was - in recording - I did not put the reference invoice number in the initial screen and rather went ahead to put document type then customer. then after pressing enter - the intended pricing proc got determined based on CuPP and DoPP. Now from file-create with reference - i had put the invoice reference - it did not affect the previously determined pricing proc.
    it was a king of work around basically, but interesting - thought of sharing with you.
    however thanks for the replies.

  • Different pricing procedure

    Hi gurus,
                  I have entered two items in document type MV with two item categories MVN and TAO. while doing billing this rental contract, For the first item(MVN), system picks the same pricing procedure as of contract(PSER01) and whereas for the second item(TAO), the system picks different pricing procedure
    (RVAA01). How it happens. can anyone share your inputs.
    Regards
    Sankar.S

    Hello
    One billing document cannot have two pricing procedures.Therefore all the items in a billing documents
    will always have one pricing procedure.
    What seems from your description is that you might have a case where both the items are in two separate billing documents.If this is the case then your the pricing procedure is being redetermined at the time of billinng.
    Please check the following for the item where wrong pricing procedure is being determined
    1) Check the billing type you are using.
    2) Check the copy control (VTFA) for the  billing item category and confirm if the pricing type refers 
        to redetermination of pricing.Ensure that you need repricing.If you need then system may redetermine
        the pricing procedure in your billing document based on the settings in customizing
    3) If you want repricing and at the same time do not want pricing procedure to change, then check the 
        customizing of billing type(VOFA) and see what document pricing procedure is assigned.Then    
        confirm which document pricing procedure is being used for your contract (VOV8).Assign the same
        document pricing procedure to the billing type
    Hope it helps.
    Thanks
    Vikas

Maybe you are looking for

  • How do I get a membership to Creative Cloud after my free trial?

    I just finished my free trial for Adobe Creative Cloud. I was using Illustrator, InDesign, Bridge, Lightroom, Photoshop and more. Now, when I try to join, it asks me for my serial number. I don't have a serial number, so it asks me for my registratio

  • Opp Close Date - Quarters should be in Company Fiscal Year format

    Hi, I have to design report to calculate No of Opp Closed in Current Quarter and Last Quarter both according to Fiscal Year format. Now, when I see Report 'Opportunity Analysis' for Data Source 'Opportunity Header and Item', Key Figure 'Close Date' h

  • Re-routing Edge servers from OCS 2007 R2 to LYNC 2010

    We have LYNC 2010 Enterprise pool with merged topology with OCS 2007 R2 Pool, using OCS 2007 R2 Edge servers. We would like to move onto LYNC 2013 and here i have some questions on Edge servers. 1. Once I migrate all users, can i keep OCS 2007 R2 Edg

  • ITunes freezes when iPod connected

    I have Windows XP and iTunes version 11.0.1. Since I've updated iTunes I haven't tried to sync my iPod touch 4th generation. When I connected my iPod my iTunes freezes and I can't click on anything. Once I disconnect the iPod then iTunes works fine.

  • Airport Extreme - 4th or 5th Generation??

    Oct 2009 4th egneration June 2011 5th generation. I've been trying to do some research on the differences and can't seem to find any. I'm about to purchase a refurbished model from apple and would like to make the right decision. Both are dual band,