Different Trays in Adobe

Hi ,
i have problem in Adobe form printing . The first page should get display from the Tray 01 and the 2nd page from diffent tray . How should i control this in Adobe form ?
Thanks&regards
Srinivas

hi
i don't know about Adobe forms..
In smartforms and scrits there is a option called 'Resource name" in the output options of the page. at page lavel.. here if we give the tray number(eg.. Tray1) then it print that page from the mentioned tray..
there might be a option called RESOURCE NAME.. check once if there is any option like this

Similar Messages

In adobe reader, I can't print from different trays?

Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer. I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck. I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays. It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe. Any suggestions?
I've also noticed a problem printing through Preview. I can select different trays using preview but the print time is extremely slow. It seems like it has to re-download the pdf page each time it goes to print. So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
Thanks for your help. Also, I am using the mountain lion operating system. Thanks again!

Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
http://www.macupdate.com/app/mac/73/adobe-reader (version 11.0.03).

How to print output of XML Publisher report in different trays of a printer

Hi All,
I have a requirement in XML Publisher Report. I need to print all pages other than last one in one tray of a printer and the last page has to be printed in another tray of the same printer.
Can anyone help me out...
Thank You..

I do not think it is possible to send all the pages to one tray and send only the last page to a different tray. However, you may review the following notes:
Note: 357402.1 - How to Print the Output to a Different Paper Size Using XML Publisher Delivery Manager?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=357402.1
Note: 394130.1 - How To Enable Printer Options Such As Duplex Printing Or Tray Selections For Bitmap Concurrent Programs
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394130.1

Different versions of Adobe Creative Suite Compatibility (CS5 and CS5.5)

Our marketing team has two different versions of Adobe Creative Suite (CS5 and CS5.5). We can save the CS5.5 down to an IDML document so users with CS5 can open/manipulate the file but it reduces the file size significantly. What I do not know is if this saving down process reduces the quality of the file?? I am relatively inexperienced with these programs as I am self-taught. Thanks for your help!

IDML is good for repairing files.
But IDML is not good to be used as exchange in a workflow because every export of IDML can change things in an unexpected way. So I would strongly recommend that everyone in the department involved in the workflow uses the very same version, anything else will let you struggle in a later point of time. When I have to exchange files with a client I use always their versions and avoid IDML in exchanging files in any case possible.
Between CS5.0 and 5.5 are also several changes possible, because some bugs related to the text engine became fixed. E.g. in CS5 if you had an automatic TOC or cross reference in a text frame with 1 or 3 round corners and 3 or 1 normal corners, automatic number got shuffled in that frame, like page 345 became 543. When this was fixed some changes in the text engine have been done.

I need a table of the different features for Adobe Standard 9, 10 and 11?

I need a table of the different features for Adobe Standard 9, 10 and 11 so that can advise my client which version can be packaed and deployed via SCCM. A detailed list of features for each version would be most useful.
Regards Paul Jenkins

See the following documents:
Acrobat Standard 9, X and XI : http://www.adobe.com/products/acrobatstandard/buying-guide-version-comparison.html
Acrobat Pro 9, X and XI : http://www.adobe.com/products/acrobatpro/buying-guide-version-comparison.html
Back to version 7 : http://prodesigntools.com/version-comparison-differences-between-adobe-acrobat-x-10-9-8-7. html

Exported PDF looks different in Preview, Adobe Reader

Hi,
I'm relatively new to InDesign and experiencing all sort of problems. I'm trying to export PDF of my resume in a small size file to send it over the email. However, after exporting when I view PDF document in different applications, it looks different.
1) In Adobe Reader in 100% view the letters in bold are "jumping". Please see the screenshot below
2) The colors of the logo come out right when viewed in Adobe Reader. Which is 1st image:
However when viewed in applications such as Preview or just default Mac preview with space bar. The colors of the logo and the contact details comes out completely different then in Adobe Reader.
I export the PDF with the default settings that comes with smallest file size but I need to make sure it looks good as this resume is for my job and will be viewed most probably on the computer. The logo is linked to Adobe Illustator file in InDesign document.
Please help as I spend about 3 hours trying to figure it out. I would really appreciate your help!
Natalia

Hi Mike,
Thank you for your answer. I've tried most of the thing you recommended but it doesn't work:
1) The file was originally created in CMYK and then I converted it to sRGB in InDesign. As well as chose transperency blend space as RGB. As for the logo then the option in Illustrator to convert the file into RGB mode seems to be disabled.
3). Exactly what I was doing.
I don't understand what I'm doing wrong... Is there a way to import all the links from illustrator into InDesign file?

Print Multiple Page From Different Trays

Dear Sir . / Mom
How are you ? Hope everything goes well with you !
I hope this massage will find you as soon as before happy and healthy for you and family .
and every thing is OK .
Tanks so much for your good support
Please send your answer to my email ( please )
{Personal Information Removed}
I have a very big problem
I have a project that the engine of this project is HP Laser ( 2055 )
As you know :
In the laser jet we have 2 input ( tray 1 ( manual )   & tray 2 ( in caste ))
I have 10 page on one time for print ( 10 page printing continually ( a letter in 10 page ))
==================================================
But I want page no. 1 printing from tray 1
Page 2,3 printing from tray 2
Page   4,5 printing from tray 1
Page 6 printing from tray 2
Page 7,8,9   printing from page 1
And page 10 printing from tray 2
10 page is 1 document and printing should be in one time
=========================================================
Note :
I would like inform you that
1      -     There are a software that I can do this program
The name of this software is trayselector
And you can download the free software from the bellow address
http://www.trayselector.com/download.aspx
but this software is working on Microsoft word
and it isn't useful for me because
My software language is JAVA .
2     -   in the printer setup ( printer driver )
You can set printing the first page in tray 1 and other page printing on tray 2 (only )
It is not usefully for me too
Because I need use different tray on different time for different page . (PLEASE SEE RED )
So :
Your product isn’t useful for me
I need a procedure for JAVA Software program
Please help me
And tell me what I should be do
I would like inform you that : our model of our printer is :
HP Laser 2055
Please send your answer to my email ( please ) as bellow address :
{Personal Information Removed}
Thanks so much
Touraj asrani

This forum is more focused on consumer level products (and issues). You may have better results asking in the Laserjet Small/Medium Business Support Forum here.
If you are printing directly from a Java app you will probably need to embed tray selection codes as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing check 2copies from different trays

while printing check, client asking for another one copy for accounting purpose . but they asked to print one copy with check paper from Tray1 and another one with bond paper from Tray2 . but I couldnt take printout in the sametime 2copies from different trays.please advice in your client place how your managing in this scenario.
Thanks in advance

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I understand that you have two types of paper loaded in your Officejet 8630 and are wondering how to switch between the two trays. I can help you with that, however I'm going to need to know what operating system is on your computer first.If you are not sure what your operating system is you can click here to find it. If you can reply with your system then I'll know which directions to provide you.

Why do I have on my computer three different versions of Adobe Photoshop: CC (64 Bit), CC 2014 and CC?

Hello commnunity,
I have some questions about the different versions of Adobe CC installed on my computer. Is not only with Photoshop, also with Illustrator and InDesign.
Which of the three versions of Adobe Photoshop or Illustrator or InDesign is the latest?
Why do I have on my computer three different versions of Adobe Photoshop: CC (64 Bit), CC 2014 and CC? Every one of them is installed in a different directory of my computer.
Which one should I have installed on a computer with windows 7 pro 64 bit?
Can I uninstall the older versions?
Thank you so much.
Alfonso

CC 2014 should be the latest version. You can uninstall any others if you choose to.

Different trays for different transactions

Hello again,
we want SAP to print from different trays of the printer, when using different transactions.
Does anyone of you know, if that is possible? How/Where can I set this?
Thanks a lot in advance!
D.

Hi D,
Depending on your environment, in Windows you can install the same printer twice - setting up default trays for the two instances separately, so you will have the same printer with tray 1 and tray 2 installed.
Since they will appear as separate printers in Windows - and therefore SAP, you will be able to assign specific print layouts to each of them - in the PLD toolbar go to Print Layout Designer -> Display Document Properties -> Paper Format -> Printer and choose according to your requirement.
This way different transactions (in fact print layouts) can print to different trays of the same printer.
I hope this helps.
Regards,
Nat

How many times can use in different computer my Adobe Illustrator CS6 under the TLP License Program?

How many times can use in different computer my Adobe Illustrator CS6 under the TLP License Program?

You have 2 activations per license.
Mylenium

Print Page 2 from a different tray

Simple question probably, but how do I print my second and subsequent pages from a different tray (Letterhead Page 1, then plain) (PCL 5 printers)
I thought the TRAYIN command would do it, but it doesn't work

I have done this before and I have made the change on the Switchpage group.
This is the easiest option as the first page will always print from what ever is the default, whereas when switchpage is activated, then you can dynamically determine what input tray you can use.
Regards

Not only different trays...but different printers

Another not urgent and more academic than anything question about forms.
I have a form with three pages, the users need it on three different types of paper and they have three different printers they would like it to print from. Ok...now, I know how to print to different trays based on the page...but can I direct each page to a different printer altogether?
I have a solution that is likely to be the best one. I'm going to tell them to buy a new printer with multiple trays. : )
Greg

THought I would close this one. I told them to buy a new darned printer and they did. : )

Help - Print first page from different tray

Hi,
I print seveal booklets and with my old printer (1200) was able to print the first page from the second tray. That is to have the cover page in a different color and weight paper.
How do I do this with collated printing with my new Officejet 8500 Pro all in one printer. The option does not appear in the print options as it did for the driver for for the old 1200 printer.
I am currently using Vista is this option available with windows 7.
I will be glad for any help you can give me.
Regards
Eddie

This forum is more focused on consumer level products (and issues). You may have better results asking in the Laserjet Small/Medium Business Support Forum here.
If you are printing directly from a Java app you will probably need to embed tray selection codes as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problem in printing amount in different currencies in adobe form

Hi All,
I have a requirement to print the amount as space for thousand seperator and comma for decimals.
I have set the pattern format such that the amount is printing in below format as required.
Locale---Italian.
Space as thousand seperator and comma as decimal seperator.
for example 1 234,45
As some of the Currencies will not have decimals, now users would like to print amount without decimals. For example in my case amount printing in KRW ( Korean currency ) is also similar to the above format which is wrong.
for example Now amount is printing as 55 000,00. But actually it should be 550 000. Similarly for JPY currency also, as it doesnot haves decimals ( checked in TCURX table ).
I have written some logic in the interface. below is the logic.
WRITE:
    wa_mhnd1-wrshb to wa_item-wrshb CURRENCY WA_ITEM-WAERS.
*READ TABLE lt_tcurx INTO lwa_tcurx WITH KEY currkey = wa_item-waers BINARY SEARCH.
IF sy-subrc = 0.
IF lwa_tcurx-currdec = '0'.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
else.
   REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
    REPLACE ALL OCCURRENCES OF '.' in wa_item-wrshb WITH ','.
endif.
ENDIF.
a. when the write statement gets executed amount will be in ,. ( 1,234.45 )format. Then my logic gets executed correctly. In this company code is CH10 ( EUR ) and KR10.
b. But sometimes after the write statement gets executed amount will be in ., format ( 1.234.45 ). In this case my logic works, but gives the wrong value. In this case company code is VN10 ( EUR )
In both the cases currency is EUR.
Will the decimal format change accordingly based on the company code code currency.Can anyone please tell me why write statement behaved differently.
Do I need to change any locale in the adobe form, or any other logic to be written in interface. ? I am trying it out from long time, but not able to fix it. I will have to fix it ASAP.
Can anyone kindly please help me how to achieve this ?
Thanks and Regards,
Karthik Ganti.

Hi Ayan,
Thanks for your reply.
I have already made the locale to default in adobe form and tried. In the interface I have written the logic to print the amount in particluar currency.
WRITE:
    wa_mhnd1-wrshb to wa_item-wrshb CURRENCY WA_ITEM-WAERS.
*READ TABLE lt_tcurx INTO lwa_tcurx WITH KEY currkey = wa_item-waers BINARY SEARCH.
IF sy-subrc = 0.
IF lwa_tcurx-currdec = '0'.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
else.
   REPLACE ',' WITH SPACE INTO WA_ITEM-WRSHB.
    REPLACE ALL OCCURRENCES OF '.' in wa_item-wrshb WITH ','.
endif.
ENDIF.
I dont know why the above write statement is behaving differently. In one case the value is shown as 1,234.00, but in another test case it shows 1.234,00.
In both the test cases the currency is 'EUR'. In case if the above write statement works correctly, my issue will be solved.
Can anyone tell me why the write statement is behaving differently. Will the currency be dependent on any other factor ( for example company code,customer )
I would like to fix this ASAP.
Thanks and Regards,
Karthik Ganti.

Different Trays in Adobe

Similar Messages

Maybe you are looking for