Difficulty starting from Tiger DVD on new hard drive for installation

I recently replaced the hard drive on my flatscreen iMac. I am having difficulty starting from the Tiger DVD to install the system software. The disk drive does have DVD-R capabilities, but is not a super drive. I hold down the "c" button as I start up with the Tiger DVD, but the screen appears the same way as it would if nothing were in the disk drive (grey with alternating smiley/"?" folder). I attempted to boot with my old 10.2 system CD, and was again unsuccessful as the CD ejected after a few more hopeful noises from inside the console and returned to my previously mentioned grey screen.
I also attempted to start while holding the option key which produced an uneventful blue screen with 2 arrow buttons that did nothing when I clicked them.
Keyboard and mouse are both working.

Mac Help
Index
Changing your startup disk
You can make your computer start up from a CD, a network volume, a different disk or disk partition, or another operating system (such as Mac OS 9 if your computer supports it). To do so, you change your startup disk.
Open System Preferences and click Startup Disk.
If necessary, click the lock icon and type the name and password for an administrator user.
Click the icon of the system folder or system volume that you want to use, then click Restart.
IMPORTANT: When selecting a network startup volume, be sure you select a valid network startup volume and not a network install image. Choosing a network install image reinstalls your system software and may erase the contents of your hard disk. A standard network volume icon appears as a globe and Mac OS X system folder. When you select a network volume icon, a message appears in the Startup pane describing the volume. A network install icon appears as a globe with downward pointing green arrow.
Another way to select a startup disk is to hold down the Option key as you restart your computer. You'll see the available startup disks and can select one.
If your computer is on a network and a network startup volume is available, you can start up from the network startup volume by holding down the N key as you restart your computer.
If you start up your computer in Mac OS 9, use the Startup Disk control panel in the Apple menu to switch back to your Mac OS X startup disk. Then restart the computer.
If Mac OS 9 is not available, your computer will only start up in Mac OS X. You can still use most Mac OS 9 applications in the Classic environment. To do this, open System Preferences, click Classic, and then click Start.
See also
startup disk
Open this for me
Startup Disk preferences

Similar Messages

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • Need a new hard drive for T43...

    I need help finding a new hard drive for my T43.  It appears that my hard drive is starting to fail.  It just seems to not power up all the time during boot up or it just dies after it's in used for a little while.  The T43 seems to only be compatible with certain types of hard drives though and I can't find any place that still sells them.  Does anyone know of a place that still sells hard drive compatible with the T43?

    Welcome to the forum!
    Any PATA laptop drive will work as long as it's 9.5mm high, but most of today's drives will throw a "2010 error" on boot, which is really not a big deal IMHO.
    The biggest hard drive that won't throw this error is Fujitsu MHV2120AH (120GB/5400rpm) that has been discontinued a while ago. Expect to pay a hefty premium for a sealed one.
    A lot of good info here:
    http://forum.thinkpads.com/viewtopic.php?f=2&t=11059
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • In need of a new hard drive for my old G5 computer

    Hello there, I'm not as savvy as you are with computers but I am in need of a new hard drive for my old G5 computer that my husband uses.  His crashed.  If you did it all over again would you buy the same new hard drive?  If so, where did you buy it?  I don't even know where to start and was SO happy to find this recent post on installing new drives into the G5.  Any advice would be much appreciated.  Thank you!
    <Title Edited by Host>

    I actually just ran across this hard drive oddity for the first time myself just yesterday. It seems that some older Macs may not be able to use the newest SATA interfaces on some hard drives.
    I an attempt to not get overly technical, SATA is the current interface type on computer hard drives. You can get some additional information from Wikipedia at http://en.wikipedia.org/wiki/Serial_ATA. There are currently three revisions, SATA-1 (the oldest), SATA-2 (the current version), & SATA-3 (the latest and greatest).
    So what happened was that my G5 could not use the SATA-3 drive I purchased because the computer could not support the SATA-3 standard. It was possible to "slow down" one of the other test SATA-3 drives to make it work like a SATA-2 and so it may be possible to do the same to other hard drives.
    To answer your question, I would NOT purchase the saem hard drive for my Mac as it does not work for this older Mac.
    My suggestion, if you can find one purchase the same hard drive that was in the computer. That way you know it is compatible. If you would like to upgrade, you will have to do some looking. Although I cannot recommend a specific drive, my two favorite companies are Seagate, www.seagate.com and Western Digitial, www.wdc.com. You most likely have a 3.5" drive, if you have a desktop, 2.5" for a laptop. WD has the Cavier line and Seagate has either Barrcuda or Momentus. What you are looking for is capacity.
    So, both Seagate and Western Digital are good. You need a 3.5" drive for a desktop or 2.5" drive for a laptop. Stick with a SATA-2 drive also known as a SATA 3Gb/s drive for compatibility. Get a drive that is 7200 RPM or higher. Finally purchase the largest capacity at you can afford. Amazon is a good general place to been looking.
    KWCitizen_Apple

  • I HAD TO BUY A NEW HARD DRIVE FOR MY LAPTOP. I AM TRYING TO RE-INSTALL MY ADOBE PHOTOSHOP ELEMENTS 12 BUT IT KEEPS SAYING MY SERIAL NUMBER IS INVALID. WHAT DO I DO?

    I HAD TO BUY A NEW HARD DRIVE FOR MY LAPTOP. I AM TRYING TO RE-INSTALL MY ADOBE PHOTOSHOP ELEMENTS 12 BUT IT KEEPS SAYING MY SERIAL NUMBER IS INVALID. WHAT DO I DO?

    jessicar
    Just user to user....based on past and current history, Adobe Tech Support is not going to help you with a technical issue which is preventing you from using your purchased serial number for Photoshop Elements. Version 12 is not the current version. And, the Adobe Tech Support is limited even for the current version which is 13. If this matter involves a purchased activated serial number trapped on a crashed computer while you are trying to install on a 3rd computer, then probably Adobe Chat Activation can be of assistance. If that is the case and you want to explore that possibility, then click on the following link
    Contact Customer Care
    Photoshop Elements
    Adobe ID, Signing In
    Adobe ID, Sign In, Account Help
    Chat Panel
    If the above link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Are you getting one of those "too many computers with your serial number" messages? Then the above should apply to your situation.
    Before the above consider....
    a. For Photoshop Elements technical issues please post your question in the Adobe Photoshop Elements Forum. Somehow your
    question got posted in the Adobe Premiere Elements Forum.
    b. Have you verified your Photoshop Elements serial number at the Adobe web site (http://www.adobe.com) - after signing in with your
    Adobe ID and Password, type My Products in the Search field and follow the path to your product in My Products. Click on Adobe
    Photoshop Elements 12 in your list to reveal the serial number.
    c. Do the install with antivirus and firewall(s) disabled.
    ATR

  • HT203167 I got a new hard drive for my lap top and when i re-downloaded iTunes most of the songs in my library were missing.  What do i do?

    I got a new hard drive for my lap top and when i re-downloaded iTunes most of the songs in my library were missing.  What do i do?

    Your songs will only be where you put them.
    Did you copy them from the old drive or your backup copy of the old drive, to the new one?

  • I had to get a new hard drive for my laptop.  Need help?

    I had to get a new hard drive for my laptop. Downloaded iTunes and now it says "this ipod it synced with another itunes library.Do you want to erase this ipod and sync with this itunes library."   Will it erase everything on my touch?

    It says so, so yea I guess....

  • How can I get all of my music off of my laptop and onto an external hard drive?  I bought a new hard drive for it but it got turned into a Time Machine drive...

    how can I get all of my music off of my laptop and onto an external hard drive?  I bought a new hard drive for it but it got turned into a Time Machine drive...  I want to have all of my music on the external hard drive, and NOT on my macbook pro.  Thanks everyone

    Hello lramospsych,
    To move your iTunes media library to a different location, take a look at the article below to walk you through that process. Make sure that you have everything organized before you move everything over.
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Regards,
    -Norm G.  

  • Need to buy new hard drive for my 17 iMac G5 pre-isight

    I need to get a new hard drive for my imac g5. I went to staples and picked up a maxtor sata hd but the screws aren't in the correct place as the original HD. Does anyone know the exact HD that came with the computer and where I can purchase one?
    Best,
    Ken

    I think I figured it out. The reason why the screws aren't in the right place is because the original HD that comes with the computer has an external housing around it. I think what I need to do is just take that housing off and put it on the new HD that I purchase.

  • Adding new hard drive for Flash recovery area

    i am adding new hard drive for flash recovery area. How i can make single directory on that flash recovery area & how i can test that i am accessing that rightly , to that directory & flash back recovery area disk?

    Are you on Windows or Unix? And are you using ASM?
    I'll assume you are on Windows....So after allocating the drive, you will format it say as F drive. Then you can create a directory T:\Flash. The parameter determining the location of the flash recovery area is db_recovery_file_dest. But you also need to set the size of the flash recovery area as well. After that's done. You can do your backups to Flash and see if the directory is populated.

  • Installing from DVD to New Hard Drive

    I have recently purchased a MacBook Pro, and a new 500 gig hard drive to use in it. The new hard drive is mounted using a hard drive dock. While attempting to install Snow Leopard on the new hard drive from the MacBook Pro's DVDs, I get the following message:
    "Snow Leopard cannot be installed on this computer."
    Is there any way to install a fresh version of Snow Leopard onto this new hard drive from these DVDs?

    First prep your drive as follows:
    Extended Hard Drive Preparation
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Upon completion quit DU and return to the installer. Complete the OS X installation.

  • How to use recovery dvd on new hard drive, install window 7

    hello, i have trouble with my laptop. my hard drive got bad sectors and now i need to replace my hdd to new one. im not sure how to reinstall window 7 on my new hdd.
    is it possible to install operating system on new hard drive using recovery disk? and how?

    Hi,
    Yes, recovery discs will work on a new hard drive, but it's generally best to ensure that the replacement drive is of the same capacity ( slightly larger is Ok ) as the original - recovery discs can have issue when used on a drive that has a smaller capacity than the original.
    When you have replaced the HDD, all you need to do is as follows.
    Tap away at the esc key as you start the notebook to enter the Start-up Menu. 
    Insert the 1st Recovery Disc. 
    Select Boot options ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter.  You may also get a prompt to 'Press any key to continue' - do this if asked.
    You will be prompted to insert subsequent discs as required.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Problems "transferring" files from time machine to new hard drive

    I was experieincing the spinning beach ball of death so I replaced my hard drive with a new one.  I am running mountain lion (10.8.2) and the new Hard drive has two partions - one for "start up" which I was able to use migration assisant to move over my applications from my time machine.  The problem I am having is that I can't figure out how to get my user account data transferred to my the data partition (journal extended) on my new hard drive.
    When I enter time machine I can't "see" my last back updates before I changed hard drives. 
    I put my old hard drive in a case and it "isn't working" so I can't just copy data from my old hard drive.  It did work initially but now it doesn't mount and I can't see it in disk utility.
    Any Ideas on how I can get my user data off my time machine back up?
    I forgot to mention that when I go into my external hard drive containing my time machine via finder and click on the folder with my user data I'm not able to open the various files - they have a red "-" and it says, The folder “Desktop” can’t be opened because you don’t have permission to see its contents.  In disk utility I can't run repair disk permision on my time machine drive because it is grayed out.
    Thanks - Dave

    I see. Don't do that. I do not believe using Migration Assistant is a valid method of accomplishing what you intend.
    Furthermore, unless you are using the "Enter Time Machine" feature, you really shouldn't pick and choose what you want to copy from a Time Machine backup... "no user serviceable parts inside". You can certainly find and individual files and folders in the Finder, but you will run into the permissions problems you describle. I would not attempt to circumvent those protections.
    As I understand Time Machine, you must either restore a volume from a Time Machine backup, thereby erasing the volume first, or restore individual files and folders by using "Enter Time Machine" when the backup has already been properly designated for the source.
    Since your replacement hard disk - the source, now - is technically new, the latter is not an option. It's as if you were trying to restore to a different computer. This can't be done.

  • How to delete a photo album from iPhone using a new hard drive & a later version of iTunes

    I'm using the same computer but with a new hard drive and a later version of iTunes. I previously loaded a photo folder from my PC to my iPhone, but I inadvertently did it twice, giving each folder a different name -- "Photo Library," and "Widget Photo Folder." Of course, I also have the "Camera Roll" folder on my iPhone. I now want to delete either the "Photo Library" or the "Widget Photo Folder" from my iPhone. On iTunes in the Photo tab, I don't have the option of deselecting the folder in my PC that I previously synced. Apparently, iTunes recognizes that the privious sync was not done with the new hard drive? How, then, do I remove one of the photo folders from the iPhone?

    You CANNOT delete photo album.  ALL pics synced to iphone are oin photo library.  Those exact same photos, NOT duplicates, can be accessed from the individual albums.
    This is how Apple handles photos.
    Just as a song is in a playlist and in the library ( there is only one song, simply two ways to access it), photos are in the library and the same photos can be accessed from the album.

  • Looking for a new hard drive for my MacBookPro 5,2 (17" 2009 Unibody) : hybrid from seagate or a 7200rpm ?

    I am looking for a faster and higher capacity hard drive for my 2009 unibody MacBookPro 17".
    I wonder if I should go for a SSHD from Seagate model ST1000LM014 or for a standard HD but with 7200RPM.
    I am worried about the reliability of the Hybride model from Seagate and if it is really that fast.

    Hi, I have dv9730ca laptop myself and I have 2 160GB seagate 5400rpm 8MB hdd's, they have an external data transfer rate of 300MB/sec and an internal data transfer rate of 1.1GB/sec. They do get up to around 55oC (i use cpuid - hwmonitor to check this out) and I have heard using the 7200rpm hdd's can increase the heat output so I would recommend using the 5400rpm hdd's instead. The best way I have found to get over the heat issue from any laptop is to use a targus chillmat, it has 2 fans and runs off a usb port. I hope this info helps you out
    HP Pavilion DV9730CA - AMD Turion 64 X2 TL-64 2200MHz, 2GB (2x1024MB) SODIMM RAM, 320GB (2x160GB) Seagate 5400rpm HDD's, nVidia GeForce 8400 GS Graphics, Broadcom ABG Draft N Wireless, HD DVD SuperMulti DL DVD+RW, 4 USB 2.0, S Video, VGA, HDMI, Firewire, 5 in 1 card reader, RJ-45, RJ-11, Expansion Port 3, Expresscard 34/52.

Maybe you are looking for

  • Layout Change when program run in background.

    Hi All, I have a layout field on the selection screen. When I run the program in foreground, iam able to see the change in the layout in the output. When I select a layout name and run the report in background, Iam sending a file to the application s

  • JSTL connect to DataBase

    Hi , I am using JSTL to connect to MYSQL DB , but it fails , any one could help , according to documentation I wrote the following tag (I am not sure about the value of the attribute "url" ): <ui:panelGroup binding="#{Main.groupPanel1}" id="groupPane

  • Can I use Airport Extreme in a Windows environment?

    I have a Mac in my office on a Window's network. I can get through to the internet by manually setting the FTP Proxy Server and port. Is there a way that I can use AE to connect to the internet in this environment?

  • Deleted email with attachments

    How do I recover my attachments from a deleted iCloud email?

  • Debug print program

    Hi,   I have created a output type for the packing list inside vl02n i.e. vl02n->pack->Extra->Output.  Then, i also tried to debug my print program by placing a break point in it.  But, the system did not stop in the breakpoint during the execution.