Digital card reader no longer works for Windows 7 Pc, 3yrs old

Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc.  HP does not have any any down loads for this.  Any suggestions where else I can find them that would not interferre with other functions of my pc

Hi,
What is your machine ? The following devices may help:
   http://www.ebay.com.au/bhp/usb-card-reader
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • T510 Windows XP 64bit - Multi Card reader no longer working

    Just installed XP 64 bit from XP 32 because i finally got tired of windows only recognizing 2GB of RAM.
    I have just discovered the multi card reader no longer works (it worked just a few days ago with the 32 bit xp).
    i have tried uninstalling and reinstalling the driver (6hss03ww.exe - Ricoh Multi Card Reader Driver) several times, with no luck.
    i do not have any uninstalled drivers, or highlighted items in the device manager.
    Has anyone else ever has this issue, or can offer some advice? i am a bit at a loss... and ready to dump this thing out the window and buy a mac...

    Hello mate,
    Lenovo doesn't support windows xp 64-bit. If you have a look in the readme file it says
    Added support for Microsoft Windows XP Professional x64 Edition (on ThinkPad
    W510 only).
    Install windows vista or 7 if you want a 64-bit OS.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • SD Card reader no longer works / Yeti Microphone no longer works

    I guess I made the mistake of updateing my iPad software during the last sync. Now I get a low power warning when I try to use the Yeti microphone. The SD card reader no longer works as well. was told that I could use a powered USB hub. This kind of kills the whole portability thing.
    Can we get Apple to fix this...PLEASE?

    Harry Manko wrote:
    Can we get Apple to fix this...PLEASE?
    This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
    http://www.apple.com/feedback

  • Inspiron 1520: memory card reader doesn't work in Windows 8

    I upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?

    Did you ever get this problem figured out?  I had two hardware devices indicating problems when installing windows 8 on my 1520.  Never actually used my card reader until I had everything up and running.  I downloaded "Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00 Ricoh R5C832, R5C843, R5C833, v.1.0.1, A00
    R141246.EXE | Hard-Drive (582 KB)
    Chipset|
    Release date 26 Jun 2007
    |Last Updated 03 Nov 2011"
    It asked if I wanted to use it since I already had a newer driver in installed and I did it anyways.  No more flags in device manager.  Hope it helps. 

  • [SOLVED]Laptop Internal SD card reader no longer working

    Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues.  Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card.  I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either.  Here are all my logs that I could think of to post for any advice:
    uname -r
    3.9.8-1-ARCH
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
    00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
    00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
    00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
    00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
    00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
    00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
    00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
    01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
    06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
    06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
    06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
    06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
    06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
    lsusb
    Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
    Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 74.5G 0 disk
    |-sda1 8:1 0 9.3G 0 part /
    |-sda2 8:2 0 63.3G 0 part /home
    `-sda3 8:3 0 1.9G 0 part [SWAP]
    sr0 11:0 1 1024M 0 rom
    fdisk -l
    Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk label type: dos
    Disk identifier: 0x000f2f32
    Device Boot Start End Blocks Id System
    /dev/sda1 * 63 19535039 9767488+ 83 Linux
    /dev/sda2 19535040 152296199 66380580 83 Linux
    /dev/sda3 152296200 156301487 2002644 83 Linux
    dmesg | tail
    [17198.557922] mmc0: new SDHC card at address aaaa
    [17535.391900] mmc0: card aaaa removed
    [17537.984043] mmc1: new SDHC card at address aaaa
    [18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
    [18199.855227] mmc1: card aaaa removed
    [18221.345032] usb 4-1: USB disconnect, device number 3
    [18473.771242] mmc1: new SDHC card at address aaaa
    [20787.874847] mmc1: card aaaa removed
    [21102.784624] mmc1: new high speed SDHC card at address e624
    [21119.691467] mmc1: card e624 removed
    It seems I have all the necessary information, but I am not sure where to go from here.  It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it.  It's listed under lspci but not under lsusb.  I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again.  Thanks for any help you guys have.
    Last edited by coolcashews (2013-07-06 00:32:55)

    Thanks for your quick reply.  Here are the logs you asked for:
    lsmod | grep mm
    mmc_core 94486 2 sdhci,sdhci_pci
    usb_common 954 1 usbcore
    pacman -Qi linux
    Name : linux
    Version : 3.9.9-1
    Description : The linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licenses : GPL2
    Groups : base
    Provides : kernel26=3.9.9
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : None
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 65511.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Wed Jul 3 16:00:01 2013
    Install Date : Fri Jul 5 11:31:57 2013
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • SD CARD READER NO LONGER WORKS after IOS upgrade. Help!

    Does anyone have a suggestion as to how I can get my sd card reader working again? My generation 1 iPad worked fine with it until I updated to IOS5. Today was the first time trying to upload pics since the upgrade. Nothing. Not even an error message. I rebooted and still nothing. SoTHAT was $30 well spent. So now, in order to get the pics onto my iPad, I am sending the pics to myself from my HP laptop, opening the emails on the iPad, and saving from there. The card reader used to work great for pics and videos. Gotta love it when upgrades make so I can no longer do before the "improvements." I would just return the camera kit/card reader, but I purchased it a year ago, so that bird has flown. Suggestions?
    Thanks in advance and Happy Holidays!
    Scott in Barrington, Rhode Island

    Harry Manko wrote:
    Can we get Apple to fix this...PLEASE?
    This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
    http://www.apple.com/feedback

  • My CF card reader no longer works with OSX 10.9

    I am a video editor, I shoot my content on a Canon XF-305 which creates MXF files on CF cards. Until I updated to OSX 10.9 everything was fine and I used to insert the CF cards into my Kingston FCR-HS3 USB card reader and then import/convert the footage accordingly. However since the OSX update I can no longer access my video footage on my Mac. The card reader constantly throws up a generic error message through finder that says 'disk not ejected properly' even though it is still plugged in. I've only managed to import a few seconds using pavtube MXF converter before it all goes wrong. I have used FCP X, Canon disk utility, and pavtube MXF converter - all are up to date with drivers and software and none of them work anymore!
    Just to let you know I've contacted Apple and all they said is to check all drivers and software are up to date - which I have done, although Canon has not released any OSX 10.9 plug ins or drivers yet - which might be a problem.
    Kingston does have a firmware update, but only for PC.
    My thought's were to go back to OSX 10.8 but apple told me I had to use Time Machine for this and the last time I backed up was ages ago and I will lose too much important data.
    Someone please help???

    Had the same problem with my Kingston FCR-HS3 Cardreader (FW 0123, bought Aug. 2012) when using it on my Macbook Pro Retina 2012 with MacOS Mavericks 10.9.1 on the USB 3.0 port. Trying it on my MacPro Early 2008 with MacOS Mavericks 10.9.1 on USB 2.0 port everything was okay.
    When trying to update the firmware of my cardreader to version 0131 (on a Windows 8 notebook) which is only available for Windows, I had an error several times and could not update. After changing to another USB-Port on this notebook everything went okay.
    Now my cardreader is working fine and I even notice a rise in transfer speed from 100 (before) to 120 MB/s when using fast CF-cards (600x or 1000x).

  • SD card reader no longer works on iPad 3.

    After I downloaded the 8.1.3 operating system onto my iPad 3, the iPad no longer recognized my SD card reader. The card reader is an Apple product, purchased at the same time as the iPad and has worked fine for the years I've had it. I have tried substituting another card reader accessory and another SD card. Same results.

    Harry Manko wrote:
    Can we get Apple to fix this...PLEASE?
    This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
    http://www.apple.com/feedback

  • SD Card Reader Doesn't Work After Windows 10 Upgrade

    I recently upgraded my laptop to Windows 10 and since then am unable to download pictures to my laptop (something I need and do all the time).  My computer doesn't even recognize that I've put an SD card into it - no noise, no pop-ups, nothing.  I also tried to plug my camera directly into the computer and go that route, but it won't work that way either.  The SD card in the camera definitely has pictures on it, but it says the "folder is empty."  This is a function that I love, need, and greatly miss.  I did check to see if there were any software or driver updates available for my laptop on your support site, but Windows 10 isn't even an option in the operating system version drop-down...  Please help!

    Hi: I think most of the g6's have the Realtek card reader. Try the W10 card reader driver directly from Realtek.  First driver on the list... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false

  • CF Card reader no longer works on 10.4. It was working on 10.3

    PCMCIA to CF Card reader was working on 10.3. Is not working on 10.4.
    I have read all of the articles about it in the archives here, and apparently there is no answer or even suggested answer.
    Inserting the Adapter with the card installed gets NO response from my powerbook since the upgrade to 10.4. All latest patches installed are to no avail, and I can read the CF to PCMCIA card on both my Microsoft Box and my other Apple (Not Tiger).
    Since I use this method to look and edit pics catured on the card, this is not a satisfactory situation.
    I am a little unhappy with no infromation being available on this as a repair.

    If you are using a Lexar 32-bit CardBus Compact Flash Reader, you are SOL. Lexar indicated many months ago that they would not be updating drivers for 10.4 compatibility. It's always a good idea to verify hardware compatibility before upgrading your OS.
    Good luck!

  • Tecra M2 - Card reader doesn't work on Windows 7

    Hi All
    I've installed Win 7 on my TECRA M2 and everything worked fine at once ... except for one thing! The SD card reader is not recognized (worked well with XP).
    Any hint please ?
    Thanks in advance
    JP

    Tecra M2 is very old notebook model and it won't be Win7 supported.
    In my opinion you should be happy that Win7 works well on this old notebook model. I cannot imagine card reader is so important and you cannot live without it.
    Card reader is specific hardware component and, as you probably know, limited with reading SD cards with different capacities.
    Maybe it sounds pessimistic now but I don't believe you will be able to find some "independent" driver for it.

  • USB Card Reader no longer works after Lion update.

    My USB card reader/writers no loger work since I "upgraded" to Lion 10.7.4. All was well with Snow Leopard, but with no built-in SD card reader I must rely on USB readers. Anyone know how to fix this issue? Are there updates avaiable or coming soon to resolve this issue?

    Hi MissMedia 83 and welcome to the forums!!
    This has been a trend that a lot of AppleCare advisors have been seeing as call drivers. Essentially, many of the USB internet modems that are used widely require a 32bit kernel to operate. In Snow Leopard, although the system was in 64bit by defauly, people had the option of booting the computer into a 32bit mode to use the USB modems successfully.
    With Lion, however, no such options exists. If your USB modem device is only compatible with a 32bit machine, then your only options are to either downgrade to Snow Leopard or find a different provider that supports 64bit.
    Sorry to be the bearer of crappy news. My suggestion is to use something like a pocket wifi or personal hotspot, where you have a wifi network that is being created by a small device that connects to the cell network. Much much easier and your computer thinks it's just a regular wifi network.
    This is what I think the issue is anyway. Could be wrong.
    Any other suggestions?

  • Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

    I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
    Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
    If it is just this version of iOS, I do hope that it is fixed in 8.1.

    The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
    Compatibility
    Questions about compatibility?
    Call
    0800 048 0408 or Chat now 
    iPad models
    iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
    To sort the iPad suggest you restore the device  especially if you did the update ovrer the air

  • 6 in 1 card Reader not found after installing Windows 8 - HP Pavillion Dv6

    I am running a dv6874ca and after installing Windows 8 the 6 in 1 card reader no longer works - the system does not read any information. I cannot find the card reader in the device manager. 
    Note: I am trying to view a Sony Pro Duo card which was possible before installing Windows 8. The only item that appears under "disk drives" within the device manager is my hard drive. 

    Try these drivers:
    ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45112.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • RoboForm Lite no longer works for Firefox 17 windows 7 and server 2008r2

    Greetings,
    RoboForm Lite no longer works for Firefox 17 windows 7 and server 2008r2 I tried to reinstall but none of the tabs function . Thank you for your assistance

    '''roboform_firefox:'''
    The original poster (OP) reported his/her OS as Windows 7 in the body of the question, therefore, your solution would be of no use to the OP. You can also see the OS for the system used by the OP to post the question to the right of the original question in this forum .
    Additionally, using an old version of Firefox is ill-advised as old versions contain uncorrected security vulnerabilities. Roboform has been very good lately in keeping their products updated for new Firefox releases and any problems with their products should be reported to them so that they can address any issues and release an update if needed.

Maybe you are looking for

  • How do I use daqmx to get encoder direction/count on E-series board?

    Hardware: PCI-6014 Labview 7.1 I have a linear actuator and wish to get distance/direction.  The motor has a quad encoder with phase A and B only.  I connected the lines according the the E-series, PFI-8 and PFI-6, and ground to digital ground. I the

  • Process Controlled Workflow- Shopping Cart Item level approval

    Hi experts, In SRM 7.0 I have activated BC Set '/SAPSRM/C_SC_600_001_SP04' & I have implemented BADI '/SAPSRM/BD_WF_RESP_RESOLVER'. My requirement is to send work item to WBS owner at item level.So the possible cases are 10 items will go for 10 appro

  • SQL Report with Scroll - javascript

    This is an example of Apex SQL Report with Scroll - made with javascript: http://tryapexnow.com/apex/f?p=12090:9 Waiting for comments here.

  • Viewing content from macbook on AppleTV = confusing

    I would like to view photos and videos from my Macbook on Apple TV. I don't understand why it is actually so confusing. On Apple's website regarding setting up Home Sharing, it doesn't say what you do after you turn on home sharing. Then what do you

  • Problems interpriting my .class file

    Hi, im new to java and I have a very simple .java file that I compiled into a .class file. The problem is, then I try and interprit it (Im using JDK 5) I get an error... "Exception in thread "main" java.lang.NoClassDefFoundError: Saluton" Saluton is