Digitizing live LPs (with some help)

My question begins with Snow Leopard, but probably involves a bit more. Maybe a few people could point me in the right direction.
I'm all up to date on my upgrades, but I have a challenge what to do next. I have no problem ripping tracks using a turntable, some inexpensive software, and the Mac OS to digitize my vinyl collection. Very easy. But the problem with live LPs is another issue.
If I try to separate live album tracks after digitizing them, the gaps are problematic. I'd like to digitize a whole album, and have it play as if it were a CD (where the tracks naturally flow from one to the next). How do I even begin to do this? What more do I need to know/buy? Has anyone done this before?
Thanks. This is a tough one.

I somehow managed to get a digitized version of my LP, so the "crisis" is over, but there's a lot of information to digest here.
Kiraly: I've been using Amadeus Pro for the easy interface - and have been using your recommended ClickRepair for a long time. An outstanding application. However, cutting it up into individual .aiff files can lead to a certain imprecision, since the there's practically no separation between tracks.
dechamp: I do use crossfeed, a useful feature. However, I imagine this overall strategy would be less than 100% effective, say, when processing a live LP (my next project). Too much inconsistency in the crowd noise. I'd want it to sound continuous.
Slammer99uk: I've never used CDA - but it seems the recommendation is an important one. And I may start using Audacity more (it came free with my turntable). It seems to have a few features Amadeus Pro doesn't.
Thanks!

Similar Messages

  • This was an add on to a BAD SERVICE comment. but could do with some help.. cheers

    My sympathies are with you, I just wished I had checked the Toshiba forums before making my purchase. I too have run into the non existence of their customer service. How on earth are you supposed to email Toshiba for some help. When I finally found an email Toshiba link,, it was a dud !! Comes up as an error ' no such address',, did a Google search for an email address,( that usually comes up trumps as someone that has been down that road and found it usually list it just to annoy,, and good on them) but could only find posts from people that had found the same as me... A dead end.."what does it say about a firm that deals in the world of communication, yet is frightened to be communicated with".
    All I wanted to do was to put two more Gigabytes of Ram into my laptop, just wanted to make sure that I was buying the right ITEM.. As it is near impossible to find anybody that has this 'what you would think would be everywhere' item in stock.. Found someone ""OFFTEK"" -DON'T USE THEM !!! Unless you want to get shouted at.!!  And sent the wrong item.. Who said they had the memory I wanted in stock as I had found the right part number :- PA3669U-1M2G.. But they sent me a TOTALLY DIFFERENT ONE  PART NUMBER--- FT256MSQ64V8U.. But insist that it is OK to use.. I just wanted to check, so as not to mess up my expensive NEW laptop (Xmas pressie)...... I WAS SENT ""MADE BY ELIXIR M2N2G64TU8HD5B-AC   0940.TW 2GB.2Rx8.PC-6400S-555-13-F1.800 MM099270NF.XX  So if any of you knowledgeable people out there know if this will be alright to use,, please let me know.. My Laptop is-- wait for it,, as, according to Toshiba search/find/put in your laptop model thingy..My laptop does not exist.... Anyway it is a, Satellite Pro L300-298.......
    Equally if anybody wants to buy this laptop from me just let me know... as I want to have a piece of Kit where the manufacturer actually gives a **bleep**.......

    i see you are having ram problems. the only ram that is compatible is kingston. anything else will either not work or you will be shipped the wrong thing and dont order from toshiba direct either there site is wrong more that it is right. if you ever have any questions in the future about ram for your laptop or someone elses the link is below.
    kingston
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Jar files............could do with some help

    I want to deploy an application I have built along with the JRE it seems creating a JAR file is the way to go. Could somebody confirm this & advise of any other steps that I will need to take along the way. Please take it very SLOWLY and omit nothing.
    I have attempted to create and run a JAR file but have met with failure so far let me explain where i am upto.
    I have an application with several class files all data or code no image or sound files. class that contains the main method is called
    "pStruct". have created a JAR file called "TelDir.jar" succesfully & checked that all required classes are their they are. Next have built the file "mainClass.txt" in notepad have been carefull to get the syntax & case correct & have entered newline before saving file.
    Now i think i am merging the text file into the manifest of the jar file
    with the line:-
    jar cmf mainClass TelDir.jar pStruct.class
    this results in an error message as follows
    java.io.FilenotFoundException:main Class(System cannot find the file specified).
    now I have tried adding .txt to the end of mainClass and the line seems
    to execute happily but if i then try and run my amended jar file with:
    java -jar TelDir.jar
    I get the following response:-
    Exception in thread "main" javac.lang.NoclassDef Found Error:GUIFrame
    and a about 8 other lines of complaint.
    ("GUIFrame" being one of my classes in the jar file)
    when building the jar file i have not stated each class individually but used the wild card. would this cause a problem. I have also made sure ALL files invloved are all in the same subdirectory.
    COULD SOMEBODY PLEASE HELP I AM GETTING A BIT F.R.U.S.T.R.A.T.E.D AFTER MESSING WITH THIS FOR 6 HOURS TODAY!!!!. (calming down now ahhhhhh.)
    Hoping somebody can tell me what i am doing wrong
    Scott

    Have discovered my mistake at the end of the line "jar cmf mainClass.txt TelDir.jar pStruct.class" pStruct is the class containing my main method as stated in the Manifest but it should read all of the classes required to make my application run or * the wildcard.
    Things always seem clearer the following day.
    When you say post the contents of the Manifest file how can i examine its contents or do you mean the contents of the text file.
    Now i have my jar file how do i take this further to enable me to deploy my application along with the JRE onto another machine?
    Regards
    Scott

  • C or C++ compiler (or even editor with some help) for OS X needed

    Hey,
    I would like to learn C and C++ and am looking for a compiler for OS X that generates executable files. An editor that helps you a bit would be even better. Does anybody know any kind of software for this? Maybe even freeware?
    Thank you,
    Jerome

    It's called Xcode. It's supplied by Apple with every machine on the OS install Disc.
    Put your OS X install disc in the drive and look for the developer tools package. It might be in a folder like 'Optional Extras'.
    ...or if you can't find your disc (or just want a newer version) you can get it from http://developer.apple.com/technology/xcode.html, but you need to create a free account.

  • Live Chat with Yvette Nicole Brown (Shirley) from NBC's Community

    Check out the live chat transcript here!
    Attention fans of NBC's Community TV series.
    Join us for a Live Chat with Actor Yvette Nicole Brown who plays the part of Shirley on NBC's Community TV series!
    The Chat will take place this Thursday, May 17th from 9:30 - 10:30 CST, the same day the season 3 finale airs!  This is your chance to ask Yvette all about her role in the show and get one last taste of Community as the season closes out.
    All questions are moderated and answered in a queued format on a first-in, first-out basis so be ready when the chat starts!
    Bookmark this page as we will update it with info on how to join the chat when it goes live on Thursday!
    http://www.nbc.com/community/
    Buy Community Season 1 & Season 2 on BestBuy.com
    Pre-order Community Season 3 on BestBuy.com
    Community synopsis
    From Dan Harmon ("The Sarah Silverman Program") and Emmy Award winners Joe and Anthony Russo ("Arrested Development") comes "Community," a smart comedy series about a band of misfits who attend Greendale Community College. At the center of the group is Jeff Winger (Joel McHale, "The Soup"), a fast-talking lawyer whose degree has been revoked. With some help from his fellow classmates, Winger forms a study group that eventually learns more about themselves than their course work.
    Also among the series stars who comprise the group are comedy legend Chevy Chase ("Chuck") as Pierce, a man whose life experience has brought him infinite wisdom; Gillian Jacobs ("The Book of Daniel") as Britta, the 20-something dropout with something to prove; Yvette Nicole Brown ("Rules of Engagement") as Shirley, a sassy middle-aged divorcée; Danny Pudi ("Greek") as Abed, a pop culture junkie; Alison Brie ("Mad Men") as Annie, a high-strung perfectionist; Donald Glover ("30 Rock") as Troy, a former high school football star trying to find his way, and Ken Jeong ("The Hangover") as Señor Chang.
    YVETTE NICOLE BROWN
    One word best describes the unfolding of
    Yvette Nicole Brown's career, and it is:
    serendipity (noun)
    1. an aptitude for making desirable discoveries by accident.
    2. good fortune; luck; blessing.
    Yvette landed her first television role - - a two-episode gig playing Toni Childs' sister, Sherri, on GIRLFRIENDS - - by chance. Casting director Robi Reed called her in to audition from a post card submission. Yvette had no credits and no agent. That stroke of serendipity at the beginning of her career, taught Yvette that you never know how God is going to move in your life and career. Booking a series regular role two months later, on the first pilot she auditioned for further proved the point. That show, ABC's THE BIG HOUSE, only lasted a few episodes; but that experience proved to be a blessing as well. Through it, Yvette learned the transient nature of the business and to always "travel light".
    Yvette has since appeared (and often recurred) on shows as varied as ENTOURAGE, CURB YOUR ENTHUSIASM, THE OFFICE, THAT'S SO RAVEN, HALF & HALF, SLEEPER CELL, HOUSE, TWO AND A HALF MEN, THAT 70'S SHOW and BOSTON LEGAL - - where she got to perform "Big, Blonde & Beautiful" from Hairspray. It was a bit of a homecoming because Yvette is no stranger to singing. She was managed by Michael Bivins (of New Edition and BBD) and signed to Motown Records when she was just a teen.
    Younger viewers may know Yvette from her recurring role on Nickelodeon's "DRAKE & JOSH," where she played movie theater manager, Helen Ophelia Dubois.  Landing that role was another serendipitous experience. The role of Helen was to be a one-time role; one that Yvette auditioned for while on hiatus from THE BIG HOUSE. That one-time role turned into four years of employment and introduced Yvette and her silliness to the best group of fans in the world...kids!  The cast of DRAKE & JOSH recently reunited in 2008 for the holiday movie, "Merry Christmas: Drake & Josh," a film that broke Nickelodeon viewership records when it was seen by over 8 million viewers the night it debuted. It has since gone on to become an annual holiday favorite.
    Yvette is also the voice of the tough, sassy and smart Cookie on The HUB’s “Pound Puppies” which begins its second season in June, 2012.  The “Pound Puppies” are a team of fearless dogs whose sworn mission is to find homes for lonely puppies.  They only look like regular dogs.  In fact these pooches are dogs of action who match up pups with loving families while they keep the humans at Shelter 17 clueless.
    Yvette has also had a successful career in commercials. She's appeared in over 40 national spots. You may have seen her in ads for BIG LOTS, PINE SOL, CITIBANK, FIBER ONE YOGURT, DAIRY QUEEN, HAMBURGER HELPER, ARROWHEAD WATER, HOME DEPOT, COMCAST, LG and DiGIORNO'S PIZZA to name a few.  Yvette has also been immortalized in puppet form as "Mrs. Lewis, from downstairs" in a series of NIKE spots alongside puppet versions of Kobe Bryant and LeBron James.
    In addition to her commercial and television work, Yvette also has a burgeoning film career. She made her film debut in the romantic comedy, "Little Black Book," working alongside Brittany Murphy and Oscar winners, Holly Hunter and Kathy Bates. Her next film, Michael Bay's futuristic thriller, "The Island" put her on the set with Ewan McGregor and Scarlett Johansson. Supporting roles in other films including "Dreamgirls" and "The Kid and I," - - where she first met and worked with one of her childhood heroes, Henry Winkler - - soon followed.  In 2008, she was in the box office hit, "Tropic Thunder" (directed by Ben Stiller) where she worked with Matthew McConaughey; as well as the family film, "Meet Dave" where she realized a childhood dream by sharing the screen with Eddie Murphy.
    In 2009 and 2010, Yvette could be seen on the big screen again in the family film, "Hotel for Dogs" starring Emma Roberts and Don Cheadle, the romantic comedy, "The Ugly Truth" starring Katherine Heigl and Gerard Butler, the indie hit, "(500) Days of Summer" starring Zooey Deschanel and Joseph Gordon-Levitt; as well as the action thriller, "Repo Men" where she played against type and shared the screen with Jude Law and Oscar winner, Forest Whitaker.
    Currently, you can catch Yvette every week on the single-camera comedy, COMMUNITY, which airs Thursdays at 8pm/7c on NBC. The same Thursday 8pm timeslot that was once home to the hit NBC comedies: FRIENDS and THE COSBY SHOW...how's that for blessed? 
    In addition to her work on Community, Yvette can also be heard as the voice of "Cookie" on the NEW animated series, POUND PUPPIES; which airs weekly on the HUB Network (formerly Discovery Kids).
    A proud native of East Cleveland Ohio, Yvette currently resides in Los Angeles California.

    Here ya go!
    http://bit.ly/CommChat
    If not try this link.

  • Could I have some help identifying and fixing dead/stuck/hot pixel?

    Hello, yesterday whilst watching a movie on my Macbook Pro I noticed something on my screen, at first I thought it was just something stuck on the screen but it seems to be an issue with a pixel. I would appreciate help regarding identifying if it's a dead, stuck or hot pixel and any ways of fixing it. It seems to be smaller than what I had previously experienced (on other machines) dead/hot/stuck pixels to be and I can't really tell if it's white or a light blue. It doesn't show up on any colour other than greys and blacks.
    Also, is it likely that taking it to an apple store will yield results if it's still in warranty and I explain that as a photographer it's a very annoying thing to have on almost the centre of the screen.
    I hope you guys can provide me with some help, it will be much appreciated.
    Stefano.

    Welcome to the Apple Support Communities
    That's a dead pixel or it may be dust, too. In both cases, as your computer is in warranty, take it to an Apple Store or reseller and you should get the display replaced for free, even if it's only one pixel.
    I wouldn't be surprised if that's dust. I have seen a lot of cases related to dust in this forum, but it has got the same solution as the dead pixel

  • NEED HELP with Sound Blaster 5.1 digital LIVE! IM FED UP WITH THIS PEICE OF JUNK SOUND C

    yes i installed the Sound Blaster 5. digital LIVE! into my system and i got a new updated installation cd from creative and everything .. now heres the problem everytime i try to do an upgrade or download stuff from creative i always get an error message sayin MY SOUND CARD IS NOT INSTALLED .. but everything on my computer says it is installed and working properly .. so what the hell is going on ??? im a first time buyer of creative products and i purchased this from word of mouth on how good it was and i tell you what this sound card is a peice of **bleep** ... i have never in my life had such a problem installing something .. well i cant even use diagnostics cause i get the same message " MY SOUND CARD IS NOT INSTALLED ... i have tried uninstalling everything and so for and still nuthing .. i get sound through it but i cannot access any of the features from the cd or upgrade any of the drivers or anything .. SOOOOOOOOOOOOOOOO WHAT AM I SUSPOSED TO DO ?? IM ALSO GOING AS FAR AS SENDING THIS BACK TO CREATIVE FOR A REPLACEMENT CAUSE THIS CARD HAS TO BE DEFECTIVE .........ANYONE WITH SOME ANSWERS PLEASE LET ME KNOW ?

    ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
    so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
    i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
    and everytime i try to do an update i get the no sound card error message so im back to square ,
    i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
    my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
    Message Edited by theviper on -06-2005 :00 AM

  • First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help!  I am not a technical person, I just want to be able to use Photoshop Elements and ge

    First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help!  I am not a technical person, I just want to be able to use Photoshop Elements and get on with it. I bought Photoshop Elements via Amazon some months ago and it worked fine.  I then got a message that advised that the trial version would expire, which it subsequently has (I have been trawling your site for weeks and weeks trying to find an email or phone contact to get some assistance).  Relucltantly, I am now typing this - and I suspect it will not help in the slightest!  I bought the FULL not TRIAL edition of Photoshop Elements and I have contacted Amazon who confirmed this, but say I need to contact you.  Can you please let me know how I can resolve this?  Louise A Fraser

    Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another.  You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
    1. Adobe Photoshop Elements
    2. Adobe ID, and signing-in
    3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
    It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
    Click here to get help now Contact Customer Care

  • I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • Help with DIgital Output Array with 6062E DAQ CARD...

    Good morning, folks... I need some help with digital output of the 6062E PCMCIA card... I can output 1 line without problems... I need to control a 4066 with my digital outputs... I am doing this without greater problems... but there's something... I need that when one of my outputs is high, the others become low, unchangeably... so I tried to use an array to control my output and I couldn't do that... some errors showed up... can you help me please? Maybe there's any errors at my software, then I thank you if you help me... the vi is anexed...
    Best Regards...
    Attachments:
    Untitled 3.vi ‏20 KB

    See below for one of many methods. Change the "lines" string for your setup.
    Also, please explore the Examples that ship with LabVIEW, and read your card's manual.
    Richard

  • I need some help with iphoto mac users

    Process:    
    iPhoto [2337]
    Path:       
    /Applications/iPhoto (original).app/Contents/MacOS/iPhoto
    Identifier: 
    com.apple.iPhoto
    Version:    
    9.2.1 (9.2.1)
    Build Info: 
    iPhotoProject-628000000000000~3
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [138]
    Date/Time:  
    2012-06-21 01:45:11.516 -0400
    OS Version: 
    Mac OS X 10.7.4 (11E53)
    Report Version:  9
    Anonymous UUID:                 
    CCD5199D-1D9F-4180-9F3E-2B6D925CEE2F
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
      Referenced from: /Applications/iPhoto (original).app/Contents/MacOS/iPhoto
      Reason: no suitable image found.  Did find:
    /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecogniti on: mach-o, but wrong architecture
    /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecogniti on: mach-o, but wrong architecture
    Binary Images:
    0x1000 -   0xd1afeb  com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto (original).app/Contents/MacOS/iPhoto
      0xe83000 -   0xf63fe7  org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
      0xfae000 -  0x114effb  com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto (original).app/Contents/Frameworks/Geode.framework/Versions/A/Geode
    0x11ee000 -  0x11f0fff  com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto (original).app/Contents/Frameworks/iLifePhotoStreamConfiguration.framework/Vers ions/A/iLifePhotoStreamConfiguration
    0x11f6000 -  0x1205fff  com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto (original).app/Contents/Frameworks/iLifeAssetManagement.framework/Versions/A/iL ifeAssetManagement
    0x1212000 -  0x123affb  com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto (original).app/Contents/Frameworks/Tessera.framework/Versions/A/Tessera
    0x124b000 -  0x1272ffb  com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto (original).app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
    0x1287000 -  0x1291fff  com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto (original).app/Contents/Frameworks/AccountConfigurationPlugin.framework/Version s/A/AccountConfigurationPlugin
    0x8fee8000 - 0x8ff1aaa7  dyld (195.6 - ???) <60FD3471-A1D7-342E-99A7-3EDECDAEC6EC> /usr/lib/dyld
    Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.3 GHz, 4 GB, SMC 1.69f3
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.4.20)
    Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: APPLE SSD TS256C, 251 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: My Passport 0730, 0x1058  (Western Digital Technologies, Inc.), 0x0730, 0xfa130000 / 6
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: Microsoft® Nano Transceiver v2.0, 0x045e  (Microsoft Corporation), 0x0745, 0xfd120000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
    AND I DONT KONW HOW TO FIX THIS HELP ANYBODY

    Go to the App Store and try upgrading to the latest version - that may fix your problems: a 'fresh' install - looks as if there's something wrong with some of your frameworks.
    Clinton

  • HT204291 When am watching live news on air play it shows only for  one minute 30 seconds I need some help?

    When am watching live news on air play it only shows for one minute 30 seconds ,, I need some help?

    First of all, Hunt--thanks for responding!
    "First, where are you playing the MPEG-2, that you see that jitter?"
    On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
    "Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
    Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
    I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
    Thanks,
    Doug

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

  • Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

    can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw  shows message that Adobe camera raw plugin cannot be found

    That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
    Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
    If you have that file there, try to download the updated camera raw plugin from the below location.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
    In case  you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
    [Moving the discussion to Photoshop General Discussions Forum]

  • I  used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

    I  used to have an OLD Photoshop cd but it has been lost and my program is no longer on cd. I talked with some photographer friends and this is what one of them told me to get: Adobe Photoshop Lightroom and CS CC... HELP please?

    If you still have your serial number, look at OLDER previous versions http://www.adobe.com/downloads/other-downloads.html
    Otherwise, the US$ 9.99 plan is what is current at Cloud Plans https://creative.adobe.com/plans

Maybe you are looking for

  • HP 2511x No HDMI or DVI

    I have an HP 2511x monitor the blue VGA works but not the other options.  I've tried on multiple computers and even a phone with hdmi output.  I've changed the sources automatically and manually and it just says in red " No Signal."

  • Errors when using multiple USB-8473 devices

    I am trying to put together an application that uses five USB-8473 devices simultaneously on one PC. I can't seem to get more than two of them running without getting error -1074388956 (object handle invalid). Any two of them will run together, but w

  • ORA-00060 during remove workspace

    I'm using Oracle Release 9.2.0.4 with Workspace Manager. In my application all changes are made inside long transaction, all involved tables are versioned. Several users work concurrently, the users can not modify the same rows (update/delete), inser

  • How to use data sets with smart objects?

    Hi, I have a psd of some mock-up boxes, and I want to apply different text to multiple versions. The solution here: http://helpx.adobe.com/photoshop/using/creating-data-driven-graphics.html is good, but doesn't seem to work with smart objects? The fi

  • PR Release with user decision

    Hi Experts,                    I have done PR Release WorkFlow and it is working fine and i am also using RSWUWFML2 program to send the workitem to external mail so that on clicking the shortcut it takes to the release screen. But they further need a