Dimension Default member use a otherdimension.currentmember.level.ordinal = 3

Hi
I am trying to create a condition in a dimension defaultMember attribute where I use another dimension as a condition.
It's possible to call another dimension or a measure to the dimension defaultMember expression ?
I am getting the error: Error Loading Metadata: DefaultMember(Dim Item, Item) The dimension [DimStore] wasnot found in the cube when the string [Dim Store].[H - Store by Region] was parsed.
The mdx used:
case when [Dim Store].[H - Store by Region].currentmember.level.ordinal = 3
then [Dim Item].[tem].&[3]
else [Dim Item].[Item].[All] end
Thanks

Hi MJGomes,
According to your description, you call another dimension when defining a default member of a dimension. Right?
In Analysis Services, the default member of an attribute is used for queries where members from this attributes is not specified. It can't refer to another dimension in condition or using other dimension member because the member should be a static member
within the current dimension. Otherwise it can be confused when executing the MDX query.
Reference:
Define a Default Member
Setting default member in role playing dimensions
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Similar Messages

Dimension default member has a strange impact both in dimension browser and excel filters

Hello All,
I have a scenario where I need to set a default member in a dimension attribute.
The problem is that when I am browsing the dimension attribute (that is a parent-child) in Visual Studio I cannot see all the values only the ones that are filtered by the default member. In addition the same happens when I create
a pivot table in excel with filter values, even if I change the attribute that has a default value.
My goal is to list (by default) all the distinct values in excel filter selectors.
Is this a limitation? Is there any way to overcome this? Is this a problem related with parent-child attributes?
Best Regards,
André Cunha

Hello All, <o:p></o:p>
Update on the situation.<o:p></o:p>
We normalized the dimension and we achieved a
satisfactory solution maintaining the default values and aggregation
settings in the new dimensions and the parent-child attribute now shows
all possible values.<o:p></o:p>
I believe this is a by design that excel does not
reflect the applied filters in the pivot tables depending of the attribute
filters selected.<o:p></o:p>
Any thoughts, <o:p></o:p>
Regards, <o:p></o:p>
André<o:p></o:p>

What is the use of Grand total level in obiee ,

hi ,
i know that we can perform drill down from one level to another level, level base measures ,aggregate atble.................
apart from that any other user if so pls give me one small example
What is the use of Grand total level in obiee

When you start to use multi-star models and none-conforming dimensions, you will use the grand total level to tell the BI Server what to do with the measures when you try and plot them all in the same answers request.
Also consider any meaure you want to perform a '% of total' you will need the total mapped somewhere, this could use the Grand total level as a level based measure.
Regards
Alastair

MDX Formula (Level.Ordinal) Problem

I'm converting some calculations to MDX to use in ASO however I am having trouble converting the condition: @curlev(Flight)<=2)
I thought I would be able to do '[Flight].CurrentMember.Level.Ordinal <= 2' but i get the error:
Error(1260052) - Syntax error in input MDX query on line 6 at token 'Ordinal' LoadFactor
Has anyone got any suggestions?
Thanks in advance :)

hmm really. I'll give that a go at work on Monday. Every example I could find seemed to indicate the way I was using it :/
thanks garycris
edit: Thanks. That was it.
Message was edited by:
Williss

Setting default member of attribute hierarchy in MDX script. Default member not taken into account while using user defined hierarchy

Hi all
I have a date dimension that (type time) with attributes
- [FiscalYear] (type years)
- [FiscalMonth] (type months)
- [FiscalWeek] (type weeks)
In addition to the attributes used in the natural hierarchy, I have an attribute [PerType] containing one member comming from the relational table 'WTD' which corresponds to 'Current Date'. All other members of this attribute hierarchy are calculated members (defined in the MDX script). Examples:
--Last year
CREATE MEMBER CURRENTCUBE.[Date].[PerType].[LY] AS NULL,
VISIBLE = 1;
SCOPE([Date].[PerType].[LY]);
SCOPE(DESCENDANTS([Date].[Fiscal].[All], [Date].[Fiscal].[Year], SELF_AND_AFTER));
THIS = ([Measures].CurrentMember, [Date].[PerType].[WTD], ParallelPeriod([Date].[Fiscal].[Year], 1));
END SCOPE;
END SCOPE;
--Month to date
CREATE MEMBER CURRENTCUBE.[Date].[PerType].[MTD] AS NULL,
VISIBLE = 1;
SCOPE([Date].[PerType].[MTD]);
SCOPE(DESCENDANTS([Date].[Fiscal].[All], [Date].[Fiscal].[Week], SELF_AND_AFTER));
THIS = Aggregate(CrossJoin({[Date].[PerType].[WTD]}, MTD([Date].[Fiscal].CurrentMember)));
END SCOPE;
END SCOPE;
--Year to date
CREATE MEMBER CURRENTCUBE.[Date].[PerType].[YTD] AS NULL,
VISIBLE = 1;
SCOPE([Date].[PerType].[YTD]);
SCOPE(DESCENDANTS([Date].[Fiscal].[All], [Date].[Fiscal].[Period], SELF_AND_AFTER));
THIS = Aggregate(CrossJoin({[Date].[PerType].[WTD]}, YTD([Date].[Fiscal].CurrentMember)));
END SCOPE;
END SCOPE;
The defalut member of FiscalWeek attribute hierarchy is set dynamically in the MDX script:
ALTER CUBE CURRENTCUBE UPDATE DIMENSION [Date].[FiscalWeek], DEFAULT_MEMBER =
Filter(
[Date].[FiscalWeek].Members,
[Date].[FiscalWeek].Properties( "FiscalWeekStartDate", TYPED) <= DateAdd("d", -2, CDate(CStr(Month(Now())) + "/" + CStr(Day(Now())) + "/" + CStr(Year(Now()))))
AND
[Date].[FiscalWeek].Properties( "FiscalWeekEndDate", TYPED) >= DateAdd("d", -2, CDate(CStr(Month(Now())) + "/" + CStr(Day(Now())) + "/" + CStr(Year(Now()))))
)(0).PrevMember;
If I run the following query:
with member
measures.x as [Date].[Fiscal].DefaultMember.Name
measures.y as [Date].[FiscalWeek].DefaultMember.Name
select
measures.x,
measures.y
} on axis(0)
from [GLWeekly]
it gives me back correctly the default member set over the MDX script.
I order the statements in the MDX Script so that the default period (week) is set at the beginning of the script (just after the calculate).
I do not understand why creating the following calculated member I am obliged to specify [Date].[Fiscal].CurrentMember in the tuple to have correct results:
MEMBER [Account].[CoA].[Standard Engagement Revenue (MTD)] AS ([Account].[CoA].[Standard Engagement Revenue], [Date].[PerType].[MTD], [Date].[Fiscal].CurrentMember)
I would expect that:
([Account].[CoA].[Standard Engagement Revenue], [Date].[PerType].[MTD])
is sufficient.
If the default week is specified in the slicer using a member of the natural hierachy (=> [Date].[Fiscal].x) it works.
Why can't SSAS use the default member if it is must defined in the MDX script?
Can someone explains me this. Thanks a lot in advance.

Hi Ina,
have you thought about adding a dynamic statement inside the MDX script? You could define the default member like this:
... DEFAULT_MEMBER = iif( Day( Now() ) = 3, <expression for previous month>, <expression for current month> );
This way you don't need to change it everytime by running a script.
By the way, what do you mean it doesn't update the default member? When you execute this MDX what does it says?
with member measures.x as [Dimension].[HierarchyName].DefaultMember.Name
select { measures.x } on 0 from Cubename
If this returns the correct name, then the problem is somewhere else. I believe it should return you the correct name. Look here, test this on Adventure Works, statement by statement and see what happens.
ALTER
CUBE [Adventure Works]
UPDATE
DIMENSION [Product].[Product Categories],
DEFAULT_MEMBER = [Product].[Product Categories].[Category].&[1]
with
member measures.x
as [Product].[Product Categories].DefaultMember.Name
select measures.x on 0
from [Adventure Works]
ALTER
CUBE [Adventure Works]
UPDATE
DIMENSION [Product].[Product Categories],
DEFAULT_MEMBER = [Product].[Product Categories].[All Products]
with
member measures.x
as [Product].[Product Categories].DefaultMember.Name
select measures.x on 0
from [Adventure Works]
I think you can see which members are default (on related hierarchies) using
MDX Studio. This should help you detect which attributes have not moved accordingly and hence cause problems in your report. The usual suspects are those attributes used in your last month reports. If that's too much for you, just copy paste the definition
of the measure x and use .CurrentMember instead .DefaultMember. And so for all related hierarchies of your dimension. You can run it as one query, just put enough measures (x1, x2, ...), one for each hierarchy, ok?
Here's a test for Day():
with
member measures.y
as
iif( Day(Now()) = 28, 'Yes', 'No' )
select
measures.y on 0
from [Adventure Works]
Today this returns Yes, tomorrow it will be No.
Ups, I just checked one more thing. When you run the script, it sets the default member only for that session. If you execute the first two of the four statements that I've sent you, it will set the default member on Bikes and show you that.
But, if you open another query windows and execute that select statement (only), you'll see All member instead. So, it has set it to Bikes only for the currect session. Consequence? You reports are not aware of it. So, better use dynamic statement in
your MDX script.
Regards,
Tomislav Piasevoli
Business Intelligence Specialist
www.softpro.hr

Level Number of Current member using MDX

Hi
What is the MDX formula for finding the Level number of the Current Member of the dimension? I tried the following as per the document but it says syntax error.
Year.CurrentMember.Level
Thanks
Kannan.

If you have registered a MemberListener on that replicated cache's cache service, you should have received a MemberLeft event when the replicated cache service been shutdown on that node unless the JVM has died or been killed thus coherence doesn't have chance to send out event.
Has anything unusual showed up in log?

SSAS Default Member Causing incorrect data in Excel Pivot Table using Multi-select in filter

I have an Excel 2013 pivot table connected to an SSAS (2012) cube. One of my dimensions has a default member specified. When I drop this dimension in the filter area of my pivot table and select multiple members including the default member then
only data for the default member is shown. Selecting multiple members where the default member is not included does not result in an issue.
I believe this may be in an issue in how Excel builds the MDX but wanted to see if there are any work arounds.
This issue can be recreated using AdvetureWorks using the following steps:
Alter the Product Dimension of the SSAS Default Member by setting the default member of the Product Line Attribute to Mountain: [Product].[Product Line]&[M]
Process the cube
Connect to the cube via Excel 2013
Drag internet gross profit to the Values area (The value will be 4700437.22 which reflects the Mountain default filter)
Drag Product Model Lines to the Filters area (you will see Mountain selected by default)
Change the filter by checking the Select Multiple Items checkbox and checking Mountain and Road (You will see that the amount does not change)
Change the filter again by selecting Road only (to demonstrate that Road has a value, 5602105.8, associated with it)
Change the filter again to select Road and Touring (to demonstrate that the correct aggregation of the two selected members is preformed)

Hi Hirmando,
According to your description, the default member cause incorrect data when dragging a attribute that contain a default member to the FILTERS area, right?
I can reproduce this issue on my environment, when dropping this dimension in the filter area of my pivot table and select multiple members including the default member then only data for the default member is shown. Currently, it's hard to say the root
reason that cause this issue. In order to narrow down this issue, please apply the latest server pack and cumulative update.
Besides, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback So that microsoft will confirm if this is a know issue.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Default member when filtering on a dimension in excel

Hi,
Many of my users have asked for a way of selecting "Month to date" that can remain in place without having to physically change the month in a date hierarchy. I came up with a way of doing it by creating a pseudocolumn "Current Month"
which shows a "Y" if it matches today's month and an N for all other rows. This has worked effectively, however now i am being asked if it could show "Month YYYY" as opposed to the "Y".
My issue with this is having a default member auto selected in a filtered dimension. I am not sure if this is possible.
I have tried setting a current month dimension member to non aggregateable and then forcing a default member, but that is global without even selecting anything.
Can anybody think of any other way of making the field automatically select when filtered? (Obviously this is necessary because if it says March, and then when it turns into April the data changes and the selection cancels).
Hoping somebody has an idea!
thanks

Hi,
Thanks for the great suggestion. I applied this, but once i did it complained about a duplicate attribute, so i added another key to make it unique but once you do that it shows all months and years in the selection - ideally i want it to just show
the current month in the selection (otherwise it is no different to selecting a month from a regular date hierarchy).
I will continue to work on this idea though because there could be a solution in there!
Thanks

[FR] How to set default member in User POV Preview

Hi!
Does anyone know how to set the default member in User POV Preview for first time users?
Example:
For dimension Entity, the default member that appear in first login of user is the Top Level member "Dim_Entity", regardless of security. It happens with all first time users.
We already try to change the User POV in Preferences, but this only limit the choices of user and didn't set the default member.
We are using version 11.1.1.3.
Thanks,
Luís

Check the following PDF for Manage User POV utility.There is an option to import POV for the users.
http://docs.oracle.com/cd/E12825_01/epm.111/fr_user.pdf (page 297)
hope this helps
Note:Correct forum for FR question is Hyperion Query and Reporting,below is the link.
Hyperion Query and Reporting
Thx
VIVEK
Edited by: Vivek Chetiaparath on Jan 3, 2013 7:45 AM

How to find out by MDX that the current users is member of a role - Default member issue

Hi,
just imagine you have a dimension with a few members (A, B, C...). I defined a role which gives some users only rights to "B". On the other hand the default member for the dimension is set to "A". Now users part of the role get an error
that the member "A" is not found. So while
https://msdn.microsoft.com/en-us/library/ms175626.aspx says the default member setting in the role "overrides" the overall default member this is not completely true because first the general default member is selected and after that the role
specific one.
So the solution might be that I explicitly define the default member in all roles. This might be possible but there is one issue: you can't define a role specific default member for users part of the adminstrator role. So all admins don't have a default
member which is quite some restriction for some users...
So the question is how to solve that problem. An idea would be that I use some MDX to determine the default member in the dimension based on the actual user's role membership. But how to do that? Or any better idea?
Thanks,
Thomas Pagel

Hi Thomas,
According to your description, you want to have a role-specific default member for different roles. Right?
In Analysis Services, when granting access to dimension, a connection will fail if a role restricts access to a default measure. As you mentioned, the best solution is specify a default member for each role. But for administrator role(full control),
it can't set the default member. All tabs except General and Membership are disabled. And the system can determines the default member of current user automatically. It's not supported to get the default member in MDX either.
However, SSAS has additive design for role security. So in this scenario, we just need to create another role for those members of administrator role and specify a default member for this role. SSAS will take that role-specific default member
for these users. And it will not effect the administration permission for them.
Reference:
Default members, MDX Scripts, Security, KPIs and Perspectives
The Additive Design of SSAS Role Security
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

How to delete Hyperion Planning member using ODI

Hi All,
Anyone know how to delete Hyperion Planning member using ODI? And how to update account type on Hyperion Planning Using ODI?
e.g.:
I have a member with account type Saved Assumption, and I need to change to Revenue, but it cannot change. But if I change to Expense, it can. So what's wrong with the mapping?
This is my csv file for update a member on Hyperion Planning.
Parent,Account,Default Alias,Operation,Data Storage,Two Pass Calculation,Account Type,Time Balance,Skip Value,Data Type,Exchange Rate Type,Use 445,Variance Reporting,Source Plan Type,Aggregation,Member Formula
Account,Statistics,,Update,,,,,,,,,,,,
Account,Meal,,Update,Store,,Expense,,,,,,,,,
Account,Test1,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
Account,Test2,,Update,Never Share,,Revenue,Average,None,Non-currency,none,,,Consol,~,
Account,Test3,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
Thanks in advance.
Regards,
Sumardi
Edited by: Sumardi Wijaya on Mar 31, 2009 10:57 PM

Hi,
To delete a member you use the Operation column, the following values can be used.
Update – This is the default and is used if not populated, it Add, updates, moves the member being loaded.
Delete Level 0 - Deletes the member being loaded if it has no children
Delete Idescendants –Deletes the member being loaded and all of its descendants.
Delete Descendants –Deletes the descendants of the member being loaded, but does not delete the member itself.
Does the member you trying to change to Revenue have a variance reporting set to "Expense" as it will need to be set to "Non Expense"
Also in your interface you can add logging options in the IKM, this maybe will give a clearer indication where your problem lies.
Cheers
John
http://john-goodwin.blogspot.com/

Import dimension and member via maxl, how to create data file and rule file

Hi
I have a task to import dimension and member into Essbase, for project requirement, I have to use text file or spreadsheet file.
I wonder which format can be imported into Essbase?
I tried to create them, failed.
Do you have any samples to help me? dimension file and rule file...
I search a lot in http://gerardnico.com/wiki/epm/essbase/dimension_build#about , but there are no samples.
Thanks in advance...
Best regards,
Samantha

import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using rules_file 'C:\TEMP\GENREF.rul' on error append to 'C:\TEMP\logs\dimbuild.log';Here issue is not with rulefile but in reading the rule file.
I hope rule file is in the database directory (By default it will get saved there only)
Try with the below command
import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using server rules_file 'GENREF' on error append to 'C:\TEMP\logs\dimbuild.log';
Rule file also had one issue
Market, Product, Measures, Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, DecHere I am seeing only four dimensions from the Sample.Basic database
Scenario is missing. So define Actual (Scenario Dimension member) in the rule file header definition.
All dimensions must be identified to parse one data file with rule file.
PS: Naming (GENREF) is also irrelevant if you are loading data. It is apt for dim load.

XMLA to alter cube default member

Hi folks,
I have a calculation script written as Default member for time dimension as 2014. Now I need to update this as 2015 using XMLA Alter scripts. Could you please help me to derive the script.
Existing calculation MDX:
ALTER CUBE CURRENTCUBE
UPDATE DIMENSION [Period],
DEFAULT_MEMBER = [Period].[Period].[Year].&[2014];
Need to update this to 2015 in all AS databases just through XMLA.
Thanks in advance,
Paddy

Hi Paddy,
According to your description, you want to update the default member of the time dimension into 2015. Right?
In this scenario, you don't have to use an XMLA scripts to do the update, you can directly modify the MDX.
ALTER CUBE CURRENTCUBE
UPDATE DIMENSION [Period],
DEFAULT_MEMBER = [Period].[Period].[Year].&[2015];
Or you can modify it on GUI.
Reference:
Define a Default Member
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Essbase hierarchy - Default member type ALL

Hi All!!
When import a cube from essbase the biee automatically select the "Default member type ALL" check box; in the presentation server manual it is said that "The ALL member is identified during import."; where can I find which is this element?
Is it used to select from this hierarchy if I don't select the dimension in my answer criteria?
Is the ALL member to be defined in Essbase? if so where is it to define?
Thanks in advance,
Regards
Daniele

Hi,
Thanks for the great suggestion. I applied this, but once i did it complained about a duplicate attribute, so i added another key to make it unique but once you do that it shows all months and years in the selection - ideally i want it to just show
the current month in the selection (otherwise it is no different to selecting a month from a regular date hierarchy).
I will continue to work on this idea though because there could be a solution in there!
Thanks

Changing OSX default volume setting to a higher level in sound preferences

When I change the default volume setting to a higher level in sound preferences within OSX, it is back at the lower level at the next listening session the following time I use iTunes on my Mac Mini. Within System Preferences there is a section that lets you "choose a device for sound output" but the only choice I have is "line-out" and under the "port" heading there is only "built-in output"--no other choices are shown. I have external speakers attached which I like to use for listening to music as I work. What is the problem? Why won't the higher volume I set remain? Also, shouldn't more than one choice be shown for sound output?

This sounds like the problem that I'm experiencing and <a href-"http://discussions.apple.com/message.jspa?messageID=2694517#2694517">aske d about a couple of days ago. The sound level resets to 50% after shutdown.
I tried setting the levels in Audio MIDI Set Up as suggested above, but that hasn't changed anything.
In answer to B_web, I am running my external speakers through the headphone jack.
So, any other suggestions?

Dimension Default member use a otherdimension.currentmember.level.ordinal = 3

Similar Messages

Maybe you are looking for