Dimensions will not be display in "mm" only in "mil".

Hi,
Using MultiSIM Blue:
In "Options" - "Global Options" - "Dimensions" I can't set the "Displayed units" to "mm". It will only display the dimensions in "mil".
What am I doing wrong?
Thanks.
Solved!
Go to Solution.

Hi there,
In Ultiboard go to Options>>PCB properties>>Grid & Units. Change Units to mm.
Best,
Fernando D.
National Instruments

Similar Messages

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????

First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

New links will not open in a tab, only in the main window

with firefox 21, links will not open a new tab, only in the main window. I have set the option for tab opening, but it still will not work

Did you installed ASK toolbar?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My contact names will not be displayed!

Hi I live in Iran when my contacts call me Their Number with country code is displayed, But their names will not be displayed! in cheap phones,this problem does not exist! This problem is very weird! Check out this very big problem to fix before release 10.3 update Thanks Good Luck

When I save nimber with country code contact name will be displayed,
and if I store the number without the country code and I get a call it does not show the contact name!!
This problem exists for all Iranians!

Removing files from nano 6th gen: right clicking on selected file will not reveal a delete option, only play, get info, rate. Highlighted and hitting delete key doesn't work.

Trouble removing files from 6th gen ipod nano: right clicking on selected file will not reveal a delete option, only play, get info, and rate. Highlighting the file and hitting delete key doesn't work. Have run diagnostics and rebooted nano to no avail. This is my second 6th gen nano; this prob never occured with it. Will greatly appreciate any help.

Doink! I didn't realize it wasn't checked. Works perfectly now. Thank you for post!!

My notebook will not start up----I see only a question mark in a small folder. What to do?

My notebook will not start up----I see only a question mark in a small folder. What to do?

Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

HT201401 my phone will not send a message to only one person. Help!

my iphone will not send a message to only one person. How can I fix this?

Have you tried going to your contact list - said contact - send message?

My iphone will not turn on. The only screen I can see is the charging screen. The phone does not seem to hold a charge

My iphone will not turn on. The only screen I can see is the charging screen. The phone does not seem to hold a charge

Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport

Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?

Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?

You could try updating your apple TV and then restarting it. Bit of a guess.

My iphone will not connect to my wifi only just started to do this the last 2 days i have tryed resetting network settings sometimes my wifi will turn on other times it will not could u plz help ?

my iphone will not connect to my wifi only just started to do this the last 2 days sometimes the wifi turns on other time no often then not it will not turn on could u help ?

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem is still not resolved, take the device to Apple for evaluation and possible replacement.
Verizon does not provide hardware support, taking the device to them would be a waste of time.

Thinkcentre M93P Win 7 (64) Will Not Blank Display

Brand new M93P will not blank the display. I have a DP-DVI Cable, Samsung monitor. I try all different settings in power manager, Win7, and can not get the display to blank after xx minutes. Ideas? Thanks
Solved!
Go to Solution.

rjevans58 wrote:
Tried all that was suggested from all contributors, still no luck.
I noticed that the screen saver never comes on, regardless of the time settings, etc. It's as if the PC thinks it is constantly busy with something.
Thanks,
Well, that's the "answer". If you are not even getting the screen saver to come on, then there's no way the power-save mode (i.e. putting the monitor to sleep, so that its power LED changes color and the screen goes dark) will EVER kick in! The second stage (i.e. power-save mode after some specified period of time of system inactivity) is dependent on the first stage first, where the screen saver kicks in after some specified period of system inactivity. It's only when the period of system inactivity exceeds the screensaver time limit and now reaches the power-save time limit that the monitor will be put to sleep.
So... something is running in your system which is convincing Windows that it is "active". Normally this would require human interface activities, like mouse or keyboard, but it sounds like in your system some task is running in the background which is "keeping the system active", as if you yourself were touching the mouse or keyboard.
I'd investigate using Task Manager, to see what's running. It might not be a bad idea to run a "cocktail" of anti-malware elimination steps (as detailed in this "recipe") on the off-chance something malicious has insinuated itself on your system that you're not aware of.
Excellent observation, about the screen saver never kicking in. That's the "giant clue" that something is running on your system which is simulating a human interface, in my opinion. Without first getting the screen saver as you should, you will NEVER get the power-save second stage as you want.

Battery will not charge. Computer runs only off adapter.

A few days ago my battery quit charging and my Powerbook 1.5GHz G4 will run only off the adapter. The computer shuts off when it is unplugged and will not boot unless it is plugged in. I tried resetting the Power Managment Unit by unplugging the cable and battery and holding the power button for 5 sec. nothing changed. This is a battery I recieved from Apple for the recall.
Here is system information my computer displays when the battery is in and the adapter is plugged in. I noticed that it recognizes the battery is installed, but it says it is not charging and that the remaining battery capacity is zero.
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3781
Remaining Capacity (mAh): 0 <-----------
Amperage (mA): 0
Voltage (mV): 8806
Cycle Count: 225
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: No <------------

Something is suspicious about those numbers. 3781 looks like the capacity of a brand new battery. If you manage your battery perfectly per Apples directions, after 225 cycles, you should be along the curve to hit 80% capacity by 300 cycles.
There are only 4 components to the charging circuit - the power adapter, the dc-in card, the battery, and the logic board. Since the power adapter runs the system, you'd assume it's OK. Do you have access to anyone with the same battery or an Apple store or Apple Authorized Service Provider where you could check to see if indeed the battery has failed? Here's Apple's US (you don't indicate where you live) service locator: http://www.apple.com/buy/locator/service/ . If it's a dc-in card problem, it costs around $100, and if it's a logic board problem, it costs more.

After changing the battery in my iphone 4s, the phone will not boot up. I only see the apple and when it sits for a few minutes, a code shows above it. What is going on? Did I damage the phone by replacing the battery?

My sister gave me her iphone 4s for my son. It needed a new battery so, I bought one and replaced it. after doing so, it will not power up. I can only see the apple on the screen and when left for a few minutes.... 10 lines of numbers and codes show up at the top of the screen. Did I ruin the iphone by replacing the battery? Was a simple switch so I don't understand what is going on. Have never had one of these before.

iPhones are not user servicable.
Take the device to a competent repair person or buy a new one.

Mac mini shut down on its own, will not restart, grey screen, spinning wheel. Unplugged everything, will still not restart. Did safe boot, will not restart after safe boot, only grey screen with spinning wheel.

Mac mini shut down on its own. Could not restart, chime, grey screen and spinning wheel. Unplugged everything but monitor, still only chime, grey screen and spinning wheel. Started in safe boot, shut Down, will not restart.
This happened a couple of months ago, unplugged everything and it restarted, now that won't work.

Hi BDAqua,
I just did the repair as you suggested. T ran the disc repair, and twice it cam back, the volume macintosh seems ti be okay, I also ran the verify and permissions repair, both came back okay.
I was actually hoping that they would find something, so they could repair. I shut the computer down, and restated with out holding a key, and I started up great. I'm baffled. I have moved 20 GB to an external hard drive, as I only had 10% open space.
I have Tech Tool 6, would you recommend to run a repair check on that, or just leave well enough alone.
I agree with you on the new Mac's, I have problems with no disc for back up, until they realize their mistake I will stay with Snow a Leopard. This is the first problem I have experienced, so I can't complain. Their last programs are not as perfected as under Steve, prior to his handling over the reins, hope this is not going to be the future we can expect from Apple.
I will wait to here back as to your suggestion regarding the Tech Tool check
Thanks for all your help.
Gratefully,
Cheri

HT201077 As of recently any photos I add to a shared photostream will not update for others. Only I can see them. How come others sharing this photo stream are not getting the new photos?

As of recently any photos I add to a shared photostream will not update for others and I don't see the updated photos on my other devices. Only I can see them from the device that i've posted from. How come others sharing this photostream are no longer getting the new photos? My iphone (the device i'm adding from) shows 20 pictures in this shared photostream and yet 4 other people that I share this photostream album with and my ipad only show 12 photos. For the past week I keep adding photos thinking people will see them but it just won't update the new ones. Any ideas how to fix this?

You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.

Dimensions will not be display in "mm" only in "mil".

Similar Messages

Maybe you are looking for