Directory change (again)
I've asked this question before, but I haven't gotten a response I was really looking for. I'd like to know, how instead of typing in "cd C:\Program Files\Java\jdk1.5.0_01" I could just automatically make the windows command prompt come up with C:\Program Files\Java\jdk1.5.0_01, and then I could just type in javac whatever. At present when I open a command prompt, is says"
C:\Documents and Settings\myname>. So, how should I change this to fit my desires? Please don't point me to http://java.sun.com/j2se/1.5.0/docs/tooldocs/windows/javac.html#options
http://java.sun.com/j2se/1.5.0/docs/tooldocs/windows/java.html#options
without an explanation. If you wanna explain to me what classpath and path are, please do. Also, if you want me to create a batch file, please type exactly how I make it and what it should say.
Thanks.
http://home.att.net/~gobruen/progs/dos_batch/dos_batch.html
In general, it is a poor idea to ask exactly how to do something and what exactly you should type. Folks here are not much into hand holding. The link I provided above is a very good resource to educate yourself on making batch files. It will take about a half an hour out of your life to read it, maybe a little longer to grasp the core concepts. Batch files are not an incredibly difficult concept to grasp after all, and considering you waited around three days for someone to answer your first question on this topic, I'm guessing you might have a half an hour to spare.
Showing a little more effort on your part will get you much better responses to your queries.
Regards
Similar Messages
-
FTP Receiver without directory change
Hello,
we have to upload data to an FTP server which does not allow directory changes. Problem is that the directory field in the FTP receiver communication channel is mandatory so we get an error message.
Is there any workaround for this?
Thank you.> we have to upload data to an FTP server which does not allow directory changes. Problem is that the directory field in the FTP receiver communication channel is mandatory so we get an error message.
Try to use a dot (.) as directory (means current directory).
Markus -
Is there a way I can get an event from a directory change? I've looked into FileSystemWatcher but from what I could gather, that would only notify my of a change within a directory. I wanted something that tells me exactly what changed. i.e. if a new file was added, changed, renamed etc. Instead of throwing a general event, where I would than have to compare the changes to the previous state, i.e. file names within the directory, file sizes etc. Basically it would save alot of post processing work. Since I haven't seen anything of this nature in the forums, it might not be posible, but I thought I'll ask just incase.
Thanks
KasBe advised that individual applications can generate multiple FileSystemWatcher events for what you as a consumer would treat as a single event.
Something as simple as saving a file in notepad can generate 7 or 8 events.
The link below is not LabVIEW related, but does point out how FileSystemWatcher works...
http://www.codeproject.com/Articles/58741/FileSystemWatcher-Pure-Chaos-Part-2-of-2
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness -
UPS Service Account Replicate Directory Changes Permissions through AD group?
I am trying to configure the UPS.
Is it possible to grant the sync account SP-UPS Replicate Directory Changes permissions through an AD group or do these permissions need to be granted exclusively using ADSI edit?you can add a group or user name using the ADSI, that's what you want to know or something else?
check the page 11 to 13 from the below white paper.
http://download.microsoft.com/download/3/5/4/354670EE-4E80-4932-B1B6-CBCC3CD66444/oit2010-whitepaper-plan-deploy-user-profiles-mysites.doc
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Replication Directory Changes _ Permission in Domain
As per the requirement from an application which will be integrated with AD and we need to grant a service ID the Replicating Directory Changes to Active Directory.We are concerned that we might accidentally let the service ID write data in Active
Directory, or have somebody abuse the service ID and can change Active Directory data.
Does somebody know what rights are part of "Replicating Directory Changes"
"Replicating Directory Changes All" and "Filtered Attribute Set"?> Does somebody know what rights are part of "Replicating Directory Changes?"
Basically, it's "read all object and meta data". No "write" :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Virtual Directory Change from Oracle HTTP Server to Embedded PL/SQL Gateway
We finally upgraded from htmldb 1.6 to ApEx 3.1.2 late last year. This was in conjunction with setting up a new server and installing Oracle 11g DB, while our production DB is still 10g. During this install, I opted for the Embedded PL/SQL Gateway, whereas our htmldb is running with the Oracle HTTP Server.
During the conversion of one of our applications I learned that Virtual Directory references to #IMAGE_PREFIX# are no longer valid for custom CSS so I had to change an entry in the page templates that I'm using to use #WORKSPACE_IMAGES#. Now I am importing another application from our htmldb 1.6 environment to our ApEx 3.1.2 environment, and I have a new problem that I think is related.
In this application we have been uploading report files for outside users to be able to download at their convenience. I think the upload is working OK, but when I try to download the report file I get the following:
Not found
The requested URL /apex/IMR.ofile was not found on this server.
The download is accomplished with a link on an SQL Report region. The Column Link info is:
Link Text = <img src="#IMAGE_PREFIX#edit_big.gif" border="0" alt="Icon 1">
Target = URL
URL = #OWNER#.ofile?p_file=#VIEW_REPORT#&v_auth=&APP_USER.
When I change the Link Text to <img src="#WORKSPACE_IMAGES#edit_big.gif" border="0" alt="Icon 1"> I lose the Edit Icon image. However, what I'm really concerned about is the URL not found error
Now, maybe I'm barking up the wrong tree, so if the problem isn't related to virtual directories, which tree should I be barking up?
Any suggestion?
Thanks,
GregoryIs the IMR.ofile a custom package for downloading files? If so, you might need to add it to the wwv_flow_epg_include_mod_local function.
I am not certain how this function also plays into the embedded pl/sql gateway, but do know it would affect this running through Oracle HTTP server when configured with the before proc.
With the embedded gateway it may very well be that you need to add this package into the ACL for outside availability. -
Source directory changed every month?
Hi Experts,
my scenario is File to proxy
message protocol for file adapter is NFS
according to my scenario every month is changed source directory...
for ex :
for this month my source directory is
Source Directory:\xyz\abc\1\daily
next month source directory is
Source Directory:\xyz\abc\2\daily
like that..
Source Directory:\xyz\abc\3\daily
Source Directory:\xyz\abc\4\daily
Source Directory:\xyz\abc\5\daily
Every month is changed...
Then in PI, i need to write any code.............or implementing JOB Shceduling?
please help me on this.........
Thanks&Regards
E. Ravi Chandra ReddyHi Ravi,
Can you try this and check.
In Sender channel use directory as \xyz\abc\*\daily. I am not sure if this works but give it a try.
Or
Make use of Advanced Selection for Sender Channel.
Give at least 6 or 12 directory name like
\xyz\abc\1\daily FileName
\xyz\abc\2\daily FileName
\xyz\abc\3\daily FileName
This would somehow help you to maintain entry once for a year.
Regards
Jitender -
I regularly need to check several bookmarks that are stored in the same directory, which usually is a couple of clicks from the main bookmarks menu.
When I select a bookmark in the tree that I created to organize my bookmarks and it does not give met the web-page/information I was looking for, I want to try another bookmarked web-page in the same directory.
So I have to click my way through the whole tree again.
I would highly appreciate if it could be made possible that hovering over the bookmarks menu automatically will unfold the whole tree to the directory where I have been last. That would be a real time saver.Try using the Bookmarks Sidebar. '''{Ctrl + B}''' to open and close it. It will stay open until you close it, and when you do close it, the scroll position will remain until you close Firefox.
-
Integration Directory changes not reaching Runtime
Dear all,
I changed a few values on one of the communication channels but is not getting reflected on the runtime. Looks like a cache refresh issue, so I did a 'cache connectivity test' in RWB.
Integration server JAVA and Integration Server ABAP and Central adapter engine are the three entries present under integration directory.
The first two are fine and are in green but the third one(Central adapter engine) is in yellow. The details show
--Cache notification from Integration Directory received successfully (in green)
--Attempt to fetch cache data from Integration Directory not yet started or still in process(yellow)
Tried to refresh the result but it is still in yellow.
So as per the 'how to handle cache' guide, I checked the RFC destination INTEGRATION_DIRECTORY_HMI and it seems to be fine. Also I have checked http://<host name>:<port>/dir/hmidiag/ext?method=info and that seems to be working fine as well
Please can you suggest what could be going wrong or what else need to be checked
Cheers
danusDanus,
Just check this document and follow the steps given:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
---Satish -
File parent directory changed-is there an easy fix?
Our network administrator recently upgraded our server and
renamed our workstations. As a result all my Dreamweaver files are
now located in a new directory.
Previously: F:\My Documents\Web Site\Image145
Now:
E:\KKWG\My Documents\Web Site\Image145
Each page has atleast 50 links and images referenced and each
one needs to be changed to a new location...this could take me
forever.
Is there an easier way???Fire the network administrator?
Use DW's Find and Replace sitewide?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"InfinitiGirl" <[email protected]> wrote in
message
news:eehlrf$oh0$[email protected]..
> Our network administrator recently upgraded our server
and renamed our
> workstations. As a result all my Dreamweaver files are
now located in a
> new
> directory.
>
>
Previously: F:\My Documents\Web Site\Image145
>
Now:
E:\KKWG\My Documents\Web Site\Image145
>
> Each page has atleast 50 links and images referenced and
each one needs to
> be
> changed to a new location...this could take me forever.
Is there an
> easier
> way???
> -
Why does comments.vi stop working when server directory changes?
With web server root directory set to "C:\Program Files\National Instruments\LabVIEW 8.2\www",
I point my browser to "http://localhost/cgi-bin/examples/comments.vi" and I get the comment form.
Next, I quit the G Web Server, set the server root to "c:\ats\www",
I copy the comments.vi and comments.llb files to c:\ats\www\cgi-bin and point my browser to http://localhost/cgi-bin/comments.vi. Instead of showing the form as before, I get a dialog box prompting me to either "Open with..." or "Save to disk". I'm using Firefox. Why does this happen? Is there a configuration that I must set up to get the G Web Server to work at other than the default location?kc64,
To your browser, you're looking at a website (served on localhost in this case) and pointing to a specific file (in this case a VI). Just as if you point your browser to an address of the form www.website.com/file.pdf it will ask you what you want to do with the file--open or save it. In this dialog box, you should have the option to automatically do what you select for the file type from now on.
The dialog box itself has nothing to do with changing your server root, it has to do with what your browser is configured (or not configured) to do with the VI file type. As for why this didn't happen the first time and it's prompting you now, maybe the action got changed for the VI file type. This can be configured in Firefox by going to the content tab of tools->options.
Regards,
Craig D
Applications Engineer
National Instruments -
HT5457 I can't get my screen to change again from vertical to landscape
Can you walk me thru getting my ipad2 to change from vertical to landscape
Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can either lock/unlock the rotation by the switch on the right hand side of the iPad above the volume switch (if that is what you've chosen in Settings), or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How to handle home directory change in /etc/passwd.pacnew?
Hey,
the recent update of the filesystem package had a change in /etc/passwd that
I am not sure how to handle:
daemon:x:2:2:daemon:/sbin:/usr/bin/nologin
was changed to
daemon:x:2:2:daemon:/:/usr/bin/nologin
As you can see, the home directory of daemon was changed from /sbin to /.
Should I merge that change into my /etc/passwd?I have read that thread but I am not quite sure that it applies to
this situation.
Leonid.I basically says that
[...] if your group/passwd files are functional before the update -- keep them as is
(unless you wan to do cosmetic changes)
Now, adding info to the GECOS field or substituting /sbin with /usr/bin
doesn't really alter the behaviour of the system, but changing a user's
home directory seems a little bit more fundamental to me. -
Security Question Linux 2.6.18-164.el5 - Home User Directory Changed
I logged into my unix account and was unable to update any folders or create files. The ownership has changed. This is the second occurrence where the first time the tech support denies it occurred. Didn't have any screenshots... Now I have screenshots for evidence. How can I determine when this happened or the user responsible?
I logged into my unix account and was unable to update any folders or create files. The ownership has changed.Your description is not much help. It does not provide any information, such as:
<ol>
<li>What was the new file permissions? (Hint: ls -ld $HOME)
<li>What file ownership should the directory have? (Hint: ls -ld $HOME after the file permissions are repaired.
<li>Were you logged on to the system when the change occurred?
<li>How is the $HOME directory mounted? Local disk? NFS mount? SAN? Thumb drive?
<li>Who else was logged into the system when this happened?
<li>Did this happen after a system reboot?
<li>What did tech support actually do to repair the file permissions?
</ol>
In other words, give us a glimmer of an idea about your issue. -
Lync trial and Active Directory changes
Hi,
I want to install a trial of Lync server and when I install it says I need to prepare Active Directory
I only want to test Lync but I do not want to make unnecessary permanant changes to Active Directory.
Should I proceed with preparing Active Directory? What happens to active directory if I later uninstall the Lync server?
Thank you.
http://peteroy.blogspot.com/If you don't have a test environment and have to make the changes to production then they will be permanent.
You cannot remove changes applied to an Active Directory Schema. The only option there would be to perform an Active Directory Restore to a backup saved prior top the Schema extension. Very messy!
If you decide not to proceed with Lync there will be no harm to the system other than unused schema extensions.
Maybe you are looking for
-
Hi everyone, I recently upgraded to Adobe XI and I can't find a "submit by email" button for my form. I created a button and tried to set up some actions but, I can only get the button to direct the user to a URL. How do I make it send the completed
-
Oracle 9i Installation on Existing Oracle 8i on HP Unix 11.11
Hi Gurus, I need to Install Oracle 9i R2 with (9.2.0.6) Patch set on HP Unix Server. My concern is Oracle 8i running on the same server which is a production Database. What are the pre Installation steps I need to take before installing Oracle 9i R2
-
How can I buy an iPad antivirus?
Hi, I'd like to protect my iPad from virus and malwares. Where can I buy a solid antivirus for iPad?
-
BPC 10.0 NW Workstatus Mail
Hi gurus, We have developed a program for changing workstatus and sending mails. In this program we have used the standard function module UJW_API_UPDATE_WS_LCKS. This function takes each combination of {entity, category, time} change its status and
-
I love tethered Shooting but as default (at least for Nikon) Lightroom does only save the file on the computer, not on the memory card. Now I want to have a backup of the image file on the memory card additionally to downloading it. The tethering sof