Directory Integration Platform Configuration Assistant - Invalid Credential

O/S: SuSE Enterprise 9
Situation: During the installer for Oracle Application Server 10g Basic Installation/Portal, I see the following error:
"Directory Integration Platform Configuration failed. Please see lofile file: /home/oracle/product/10.1.2/OracleAS/infra/ldap/log/dipca.log"
A review of dipca.log shows the following:
"oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:787"
The user authentication method set up on the server was local (/etc/passwd). Could this be my issue? If so, how do I correct it? Any thoughts as to what the issue is?

You can have the BI, J2EE and webcache in a single midtier. That should not be an issue.
The password for b2b stored in OID may be out of sync with the password you have set. Please find out what is the password in OID and then reset your b2b schema password with the password stored in OID. The way to locate the b2b password in OID is as follows:
Login to OID and traverse through the following nodes:
Entry Management | cn=OracleContext | Products | IAS | IAS
Infrastructure Database | orclReferenceName | orclResourceName=B2B
Hope this will resolve your problem,
Eng

Similar Messages

Directory Integration Platform Configuration Assistant hanging

Hi,
Installing 10gAS (10.1.2.0.2) infrastructure on Linux ES4 (64-bit) - High Availability cluster, node 1.
The Directory Integration Platform CA is hanging when I retry it, it having previously failed probably due to a Load Balancer config error on my part (I had a timeout set too low (30s) and got "Broken Pipe" error message).
Having fixed this LB config, hit retry on the CA (still in the OUI) but it is just hanging.
Tried deleting the /tmp/EM_CONFIG_INSTALL.lk file, as per the install doc, and retrying but no success.
I am on retry attempt no. 7 and previous attempt (I think attempt no. 4) reported the following in dipca.log:
oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials
at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:814)
at oracle.ldap.oidinstall.backend.OIDConfiguration.<init>(OIDConfiguration.java:144)
at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configDIP(OIDConfigWrapper.java:463)
This log has not been written to since this attempt.
Any ideas?
Thanks,
Gavin

Hi,
If the SSOCA falis, you may notice a Java Stack Trace. Can you please post the Java Stack Trace too ? It might give a clue about the problem.
Regards,
Sandeep

Directory Integration Platform - DN Mapping Rule

Hi all,
Can anyone help me with setting up the mapping in a directory synchronization profile in DIP?
Using the GUI, the three fields required are Source Container, DIP-OID Container and DN Mapping rule.
The containers are obvious but what is the syntax for setting the DN mapping rule? I just want to match equality on the cn attributes in each container.
Many thanks,
Bernie

r u using the AD specific or Default schema?
Cant u simply put the selection criteria as "Present" instead of "Bank" - of course since you say that dn is not available we need to see which field should provide the info.

Database Configuration Assistant Invalid entry size

Hi ,
every time I try to install , I get an error message at the end saying "Invalid entry size (expected 209723392 but got 209720206)"
Anyone experience with this problem ? I need a solution urgently because I need the software for academic reasons.
I'm running WinXP Pro on NTFS partition
Tia
Oliver Williams [email protected]

I saw the same problem on Linux when I tried to generate/install the 'General Purpose Database'. However, when I selected 'New Database' the DBCA generated a DB; I still got some errors like 'insufficient privileges' during the Java and XML stages but the DB seems to work w/out problems.
Michael

OID DIP (Directory Integration Platform) Question

Does anyone have any experience or knowledge with running numerous DIP Profiles on an OID? We're looking at 500+ DIP Profiles, each of them running very frequently, every few minutes. Will it be a problem for OID to handle this number of DIP Profiles?
Any help would be greatly appreciated.Thanks!

We are syncing user information from a non-LDAP directory. Unfortunately, our DIT structure is such that certain types of users (as defined by geographic locations) are contained within separate folders. We have over 500 different "types" of users, each with their own place (container) in the tree. This removes the possibility of having one DIP mapping file. Each office has it's own mapping file and own config file that queries based upon said location.
Thanks.

DIP (Directory Integration Platform)

What user does DIP actually make modifications with? I'm trying to limit the actions of an OID plug-in so that it is only invoked after (post_modify) DIP makes the modification (i.e. when the synchronized database is modified).
Likewise, it would be useful to know how to make a plug-in fire only when someone besides DIP has made the modification.
Basically this user would be in the Plug-In Management -> "PLUG-IN NAME HERE" -> Optional Properties tab -> Plug-In Request Group.

DIP performs the operations as the profile. The identity used will be orclodipagentname=<profilename>,cn=subscriber profile,cn=changelog subscriber,cn=oracle internet directory

Active Directory integration: Invalid Token Error in Verification Service

I'm having problems with Active Directory integration. I'm able to browse users in the task routing slip in JDeveloper. But I'm unable to login to the worklist application.
Getting an "Invalid Token Error in Verification Service" error. Any pointers?
<2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration error.
<2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration file has error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration file has error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <::> WorkflowService:: VerificationService.destroyContext: invalid token: c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8=
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-30503
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service. Received invalid token c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8= in destroyContext
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.verification.impl.VerificationService.destroyContext(VerificationService.java:667)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.query.impl.TaskQueryService.destroyWorkflowContext(TaskQueryService.java:161)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at worklistapp.servlets.Logout.handleRequest(Logout.java:66)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at worklistapp.servlets.BaseServlet.doGet(BaseServlet.java:142)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at java.security.AccessController.doPrivileged(Native Method)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at java.lang.Thread.run(Thread.java:595)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Caused by: BPEL-10555
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration error.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration file has error.

Hi Adina,
thank you for your answer (questions)!
We use 10.1.3.1 SOA Suite and the default jazn.com Security Provider and what we set at java.naming.security.principal property is oc4jadmin.
It is interesting, we deployed again out EAR and now it works again! There is not Invalid Token Error exception, but we didn't change almost anything...
Can we debug it somehow?
Where does this bug come from?
Thanks!
ric

Integration Builder: Configuration Integration Directory not start.

Hello,
After we patch PI from sp14 to sp 23 while we starting the Integration Directory, it result in the error "Unable to launch the application"while verifying the application:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://<hostname>:port/dir/directory/aii_ibdir_sbeans.jar.
we have jre 1.6.0_24.
I get this error:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://pint1.dlg.dk:50000/dir/directory/aii_ibdir_sbeans.jar
     at com.sun.deploy.cache.CacheEntry.writeManifest(Unknown Source)
     at com.sun.deploy.cache.CacheEntry.access$2000(Unknown Source)
     at com.sun.deploy.cache.CacheEntry$9.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.deploy.cache.CacheEntry.writeFileToDisk(Unknown Source)
     at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
Regards

Hi,
When I start Internet Explorer with this url http://port:50000/rep/start/Main.jsp
I get this massage: on Additional Information
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Timestamp: Mon, 28 Mar 2011 09:20:36 UTC
Message: 'parent.InnerFr' is null or not an object
Line: 61
Char: 15
Code: 0
URI: http://port:50000/rep/start/XI.js
Can it be reason I can not start * Integration Builder: Configuration Integration Directory*. And get this massages:
com.sun.deploy.net.JARSigningException: Could not verify signing in resource: http://port:50000/dir/directory/aii_ibdir_sbeans.jar
Any Help
Regards

Fail when config "Internet Directory Configuration Assistant"

I install oracle9ias( Infrastructure ) in AIX4.3.3 .
It failed when config "Internet Directory Configuration Assistant"
error message:
No output aviaible for this tool

the solution is
1- I removed the Network cable
2- I formatted the server
3- I Installed the Application Server
4- I Connected the server with network and I gave a static IP to the server
Best of Luck
Edited by: user13011851 on Jan 11, 2011 2:40 AM

Internet Directory Configuration Assistant fails

I have installed 10g Infrastructure, but when the Internet Directory Configuration Assistant runs, it fails with the following error:
Output generated from configuration assistant "Internet Directory Configuration Assistant":
389
636
cn=orcladmin
asdb
infra904.superfatpc
Error occured during the previous operation. Please see the log files.oracle.ldap.oidinstall.backend.OIDCAException: The following port is not free :389
Configuration assistant "Internet Directory Configuration Assistant" failed
The ports 389 and 636 are surely free (no process holds them).
Even though the OIDCA fails, I still can log in the directory at port 389. (There's no entry in the directory at all)
In the release notes for version 9.0.4 of OracleAS, there's a section titled:
Configuration Assistant Failure on Computer without Appended Domain Name.
This is actually my case since my computer do not have the domain name appended, it's just a standardlone computer.
Oracle also exposes the solutions to workarround this issue, but it couldn't help me because my tnsnames.ora and sqlnet.ora are already correct.
If any one has experience with this problem before, please help me!
My computer:
P4 2.8GHz, socket 775, 1G RAM
OS: Windows Server 2003
OracleAS 9.0.4

Did the installer pre-check return any warnings? can you connect to the OID backend DB. e.g. via sqlplus? Basically this looks like a TAR you should open at metalink.
regards,
--Olaf

Internet Directory configuration assistant failed while installation

Hi,
Internet Directory configuration assistant failed while installation of OID Apps infrastructure Identity management componenet installation for HA option Oracle AS cluster identity management.
Tue Apr 30 15:40:56 BST 2013 OID CA started.
Registering OID server..
SID: orcl
DB Host: DBHOST2
DB Version:10.1.0.5.0
create final wallet
Setting OID wallet permissions..
cmdline:0:/a01/OIDPRODZ/ldap/bin/oidsp.sh
Linux
Entering Ldap Post Installation Set File Permissions
Setting wallet file protections
Leaving Ldap Post Installation Set File Permissions
Stopping OID Server using OPMN..
Starting OID Server using OPMN..
Tue Apr 30 15:41:04 BST 2013 Bind request issued. Waiting for OID Server response.
with a retryCount:20
Tue Apr 30 15:41:34 BST 2013 Bind request issued. Waiting for OID Server response.
javax.naming.CommunicationException: APPHOST1.process.com:13060 [Root exception is java.net.ConnectException: Connection refused]
     at oracle.ldap.util.jndi.ConnectionUtil.returnInitialLdapContext(ConnectionUtil.java:491)
     at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:134)
     at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:156)
     at oracle.ldap.oidinstall.backend.OIDConfiguration.isOIDSrvUp(OIDConfiguration.java:961)
     at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:277)
     at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:508)
     at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:845)
     at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:984)
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:124)
     at com.sun.jndi.ldap.Connection.createSocket(Connection.java:346)
     at com.sun.jndi.ldap.Connection.<init>(Connection.java:181)
     at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:119)
     at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1668)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2599)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:290)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.init(InitialContext.java:219)
     at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:133)
     at oracle.ldap.util.jndi.ConnectionThread.run(ConnectionThread.java:61)
Any suggestion ?
Thanks

Hi,
Thank you for the replay.
#cat /etc/hosts
# device defined for TCP in your /etc/net file. It may also contain
# entries for well-known (reserved) names such as timeserver
# and printserver as well as any other host name and address.
# The format of this file is:
# Internet Address Hostname # Comments
# Items are separated by any number of blanks and/or tabs. A '#'
# indicates the beginning of a comment; characters up to the end of the
# line are not interpreted by routines which search this file. Blank
# lines are allowed.
# Internet Address Hostname # Comments
# 192.9.200.1 net0sample # ethernet name/address
# 128.100.0.1 token0sample # token ring name/address
# 10.2.0.2 x25sample # x.25 name/address
127.0.0.1 loopback localhost # loopback (lo0) name/address
192.168.107.205 NSEL-CHN-S05 myserver.com
#netstat -a |grep 13062
(no output)
In my knowledge these are the patches required.
Patches
1)IY70159 : KRTL relocation problem
2)IY66513 : Parsing of LDR_CNTRL value fails
3)IY68989 : write to mmapped space hangs
I checked like this,
# instfix -i -k IY70159
All filesets for IY70159 were found.
# instfix -i -k IY66513
All filesets for IY66513 were found.
# instfix -i -k IY68989
All filesets for IY68989 were found.
Regards,
Mat.

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

11g fails in Database Configuration Assistant with ORA-01919

I'm installing 11g on a 32-bit CentOS (redhat) box, and the Database Configuration Assistant is failing with
ORA-01919: role 'XDBADMIN' does not exist
I can in fact read, so I do know what's causing this particular error (and all the cascading errors if I hit the "ignore" button) but I don't know what I missed earlier in the installation process that should have created this role.
The Database Configuration Assistant is at 46% completion when it throws up this error.
Looking in the logs under /usr/lib/oracle/xe/app/oracle/cfgtoollogs/dbca/orcl/mkplug_v3_orcl.log
I see this particular error in
specify password for OE as parameter 1:
PROMPT password for SYS as parameter 2:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[/<password>][@<connect_identifier>] [edition=value] | /
GRANT xdbadmin TO oe
ERROR at line 1:
ORA-01919: role 'XDBADMIN' does not exist
GRANT create any directory TO oe
ERROR at line 1:
ORA-01031: insufficient privilegesBut I think this is a secondary error. The log file's first entry is an error:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[/<password>][@<connect_identifier>] [edition=value] | /
20090714 07:01:02
1 row selected.
old 1: CREATE USER hr IDENTIFIED BY &&password_hr
new 1: CREATE USER hr IDENTIFIED BY change_on_install
User created.
....Any help where I can look to get closer to the original error?
Thanks!

You should check out metalink doc id 742014.1, "XDB 11g Install and Deinstall Note."
Hopefully this helps.

Ias 10g (9.0.4) on Solaris 9 (SPARC) . Configuration Assistant Error

Hi
I'm traying to install Oracle Application Server 10g (9.0.4) on Soalris 9 (SPARC)
when installer starts all requeriments are fulfilled
and show this message:
Using paramFile: /export/home/ias10g_install/Disk1/install/solaris/oraparam.ini
Checking requirements...
Checking operating system version: must be 5.8 or 5.9.
Actual 5.9 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWsprox,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 5621MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 5595 MB Passed
All requirements met.
Checking operating system patches: 113096-03,112785-26 Passed
Checking for patch 113096-03; found 113096_03
Checking for patch 112785-26; found 112785_49
Checking if CPU speed is above 250 MHz.
Actual 1002 MHz Passed
Checking monitor: must be configured to display at least 256 colors.
Actual 16777216 Passed
Variables de entorno:
     ORACLE_HOME =
     PATH = /usr/bin:/usr/ccs/bin:/usr/bin::/usr:/usr/dt/bin:/usr/openwin/bin:/usr/ucb:/bin:/usr/openwin/platform/sun4u/lib/sparcv9/GL:/opt/j2re1.4.2_06/bin/:/opt/csw/bin
     CLASSPATH =
but when system shows the 'Configuration Assistant' console the 'Java configuration Assistant fails'
the message that returns is:
ADMN-202026
DCM ha encontrado un problema con el subsistema de la API de Repositorio de OracleAS.
Excepción Base::
oracle.ias.repository.schema.SchemaException:iAS Property could not be found Property Name Caché de Web.LaunchSuccess in /export/home/ias10g/OraHome1/config/ias.properties
Consulte la excepción devuelta por la API de Repositorio para obtener una resolución. La API de Repositorio puede estar configurada de forma incorrecta.
oracle.ias.repository.schema.SchemaException: iAS Property could not be found Property Name Caché de Web.LaunchSuccess in /export/home/ias10g/OraHome1/config/ias.properties
     at oracle.ias.repository.local.IASPropertyCache.readValue(IASPropertyCache.java:62)
     at oracle.ias.repository.IASSchema.getAllComponents(IASSchema.java:2311)
     at oracle.ias.repository.SchemaManager.getAllComponents(SchemaManager.java:1554)
     at oracle.ias.sysmgmt.persistence.SeedDbAccess.getConfiguredComponentTypes(Unknown Source)
     at oracle.ias.sysmgmt.clustermanagement.ComponentTypeFactory.init(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.initRepository(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
best regards

Fixed my issue.
My first issue was with the repository. Our database repository is set to nls_length_semantics='CHAR' and when you run the repository wizard, you have to set it to 'BYTE'
Metalink Documentation note 373997.1
Applies to: Oracle Lite - Version: 10.2.0.1.0
This problem can occur on any platform.
Symptoms
The problem is that when using the MOBILE SERVER 10.2.0.1.0
by doing the following :
- Install Mobile server 10.2.0.1.0
- start the Mobile Server
MGP fails with the following error :
ORA-942
- This happens with those versions :
mobile Server 10.2.0.1.0
- Therefore, the problem to solve is to be able to avoid this MGP error
Cause
nls_length_semantics is set to CHAR.
Oracle lite database supports ONLY BYTE semantics
Solution
To implement the solution, please execute the following steps:
1. Stop Mobile Server
2. Drop user mobileadmin cascade;
3. alter system set nls_length_semantics='BYTE'
4. recreate the repository using repwizard
5. start Mobile Server
6. You should not get any issue...
Errors
ORA-942 "table or view does not exist"
ORA-904 %s: invalid identifier / invalid column name

Oracle Clusterware Configuration Assistant fails

I am installing clusterware 11.1.0.6 and the runcluvfy commands all came back as passed, except for the VIP, which the documentation says to ignore. The whole install goes to 100%, then it runs the configuration assistants.
It falls over on the first of these: Oracle Configuration Assistant. If I retry it, the same addition is placed in the logfile, as below:
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vm-rac1 vm-rac1-priv vm-rac1
node 2: vm-rac2 vm-rac2-priv vm-rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\11.1.0\crs)
Step 3: configuring OCR repository
Oracle Cluster Registry already initialized
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
vm-rac1 failed to startup service OracleCSService, err(1068)
vm-rac2 failed to startup service OracleCSService, err(1068)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\11.1.0\crs
Configuration directory is set to C:\oracle\11.1.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is null
INFO: Since the option is to overwrite the existing C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Please help.

Sorry:
alertvm-rac1.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.531
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.609
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.671
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.687
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:28.921
[client(3792)]CRS-1013:The OCR at \\.\ocrcfg was successfully formatted using version 2. Ignore earlier CRS-1006 messages if any.
2009-05-20 15:44:40.875
[client(3796)]CRS-1801:Cluster vm-rac_cluster configured with nodes vm-rac1 vm-rac2 .
client\clscfg.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 16:31:03.796: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.812: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.921: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.937: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
client\clsfmt.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.187: [ CLSFMT][3872]clsfmt: successfully initialized file \\.\votedsk1
client\ocrconfig_3788.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.453: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.531: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.562: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.562: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.562: [ OCRCONF][3792]ocrconfig starts...
2009-05-20 15:44:25.578: [ OCRCONF][3792]Upgrading OCR data
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.609: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.609: [ OCRCONF][3792]Exporting OCR data to [OCRUPGRADEFILE]
2009-05-20 15:44:25.640: [ OCRAPI][3792]a_init:7!: Backend init unsuccessful : [33]
2009-05-20 15:44:25.640: [ OCRCONF][3792]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2009-05-20 15:44:25.656: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.671: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.875: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.921: [ OCRRAW][3792]propriowv: Vote information on disk 0 [\\.\ocrcfg] is adjusted from [0/0] to [2/2]
2009-05-20 15:44:28.921: [ OCRRAW][3792]iniconfig:No 92 configuration
2009-05-20 15:44:28.921: [ OCRAPI][3792]a_init:6a: Backend init successful
2009-05-20 15:44:30.593: [ OCRCONF][3792]Initialized DATABASE keys in OCR
2009-05-20 15:44:31.453: [ OCRCONF][3792]csetskgfrblock0: output from clsmft: [clsfmt: Failure trying to resize OCR file \\.\ocrcfg
from 10725732864 bytes to 10725736448 bytes
clsfmt: successfully initialized file \\.\ocrcfg
g
2009-05-20 15:44:31.531: [ OCRCONF][3792]Successfully set skgfr block 0
2009-05-20 15:44:31.531: [ OCRCONF][3792]Exiting [status=success]...
So, it seems to be all about the OCR not setup correctly, however, all I've done is follow the notes. This was a 'clean' VM install of win2003 Server, so nothing has been accidently tinkered with.

Directory Integration Platform Configuration Assistant - Invalid Credential

Similar Messages

Maybe you are looking for