Directory server installation on Sun Sparcstation giving errors

Hi,
I am trying to install Iplanet directory server 5.0 on Sunsparc station.Already I have installed Iplanet Web Server and it is working fine.
When I try to install Iplanet Directory server, it goes through but in the last step, it is giving the following error.
error:ld.so.1: ./ns-slapd: fatal: ../../../lib/libsh.so: bad ELF flags value: 256
error:Killed
error:server:The server could not be started.
system_errno:2
ERROR. Failure installing iPlanet Directory Server. Do you want to continue [n]?
I have installed all the SUN recommended patches.
I am following the steps given in the document.If you are aware of this problem please help us.
Thanks.
Mahantesh.

Hi,
Make shure Ur running the ldap server in a default account specified at the time of installation user nobody and group nobody.Else create an account through
native unix utilites with enough rights.
DO check the patches installed that also causes such error's with showrev -p command.

Similar Messages

Oracle Directory Server Enterprise Edition/Sun DSEE oim11g r2 connector

Hi,
is there any OOTB oim 11g r2 connector available for Oracle Directory Server Enterprise Edition/Sun DSEE

Yes. The standard LDAP OIM ICF connector fully support ODSEE.

SUN ONE Directory Server installation Problem on Win XP

Can some one look at the installation error on WIndows XP
ERROR: Ldap authentication failed for url ldap://santoshlaptop.cook.com:51303/o=NetscapeRoot user id admin (151:Unknown error.)
Fatal Slapd Did not add Directory Server information to Configuration Server.
Configuration of the Directory Server failed.
Error Directory Server configuration failure
Checking connection to the Configuration Directory Server... failed.
The Admininistration Server cannot be configured.
Error Administration Server configuration failure
Error Configuration of the server(s) failed
Thanks a lot
Santosh

HI everyone,
I tried installing directory server 5.2 p4 on WIN XP Professional machine and got the following error:
[slapd-Teja]: starting up server ...
[slapd-Teja]: [22/Sep/2006:13:25:52 -0400] - Sun Java(TM) System Directory Server/5.2_Patch_4 B2005.230.0301 (32-bit) starting up
[slapd-Teja]: [22/Sep/2006:13:25:54 -0400] - Listening on all interfaces port 30145 for LDAP requests
[slapd-Teja]: [22/Sep/2006:13:25:54 -0400] - slapd started.
Your new directory server has been started.
Created new Directory Server
Start Slapd Starting Slapd server configuration.
ERROR: Ldap authentication failed for url ldap://ldapteja.hcs.com:30145/o=NetscapeRoot user id admin (151:Unknown error.)
Fatal Slapd Did not add Directory Server information to Configuration Server.
Configuration of the Directory Server failed.
Error Directory Server configuration failure
Checking connection to the Configuration Directory Server... done.
Registering Administration Server with Configuration Directory Server... done.
Loading Administration Server tasks... done.
Loading global Administration Server configuration... done.
Generating configuration files ... done.
Writing Administration Server keys to the Windows registry... done.
Configuration of the Administration Server succeeded.
Administration server started properly.
Error Configuration of the server(s) failed.
Click Next to continue.
In fact I did install 5.2 before on my machine but I think it was 5.2 p2. I then installed 5.1 on the same machine.. as the machine was running slow I uninstalled both 5.1 and 5.2 as well.. but from then on I cannot install 5.2 on my lasptop .. can please suggest me some thing that can fix this problem..
I had this in my host file
192.168.1.107 Teja.hcs.com..
Any help is reatly appreciated ..

Sun Directory Server Installation

Hi all,
I am a student in a Computer Science degree and as my project i am designing a web application that allows users to exchange ideas through a "messaging" system.
After discussion with my tutors we have come up with a design idea that we would use an LDAP server to authenticate users as well as keep message details such as Topic, message header, etc. The actual body of the msg should be kept in a separate database.
To the point....
It has been suggested that i use the Sun Java System Directory Server 5.2 for this project and i was also given a compressed installation package. I have tried to install this and received error msgs similar to the ones i have found others have had in this forum.
For example topics:
1. Forums - Directory Server configuration issues in Windows
2. Forums - Install failed on Windows XP
I am using windows XP and from what i have read although it is not supported some people have managed to get this to work. Also i read that maybe Studio enterprise might solve this issue or provide some support?
Is this true and if so can someone give me some guidance on how to achieve this?
Also i would appreciate your opinion on wether this design approach( LDAP for authentication and database for store) is feasible or technicaly "correct" and maybe suggestions to a different approach....

I think that its never a bad idea to get acquainted with something like the Sun Directory Server although I'm not sure that means that one HAS to use it in a project.
The DS can be a pain to get up but for the most part if you get the latest DS5.2 Q4 or something...most installations go smoothly. If it was me I would just chuck every thing about the convo into the directory but I'm sure that there's a reason that you want to use the DS in conjuction with other storage DBs.
I don't think you need to get Studio enterprise. I was able to get it up and running all by itself on windows. After I installed it I jsut made sure to remember the two random ports it picks up for Admin and DS ldap usage. Also I changed the password expiry time of the account that is used by the Admin console.
GLuck with this.
Cheers,
- Pulkit

No Sun One Directory Server Installables at the Sun Site

Hi All,
I'm trying to download Sun One Directory 5.2 for LINUX box.
But in the download link http://www.sun.com/download/products.xml?id=3ee79e69 it says Sorry, no download available now, please contact the administrator.
Does anyone knows from where can i get the installable's? or some other link where i can find the installers.
Thanking you in advance,
Regards,
Praveen Hanchate.

Hi Praveen,
All downloads need to go through the Product Selection wizard : http://www.sun.com/software/products/directory_srvr_ee/get1.jsp
The most recent full distribution for Directory Server 5.2 is 5.2patch4.
If you select 5.2patch6, you will be proposed to download the patch and the previous complete release.
The release latest version of Directory Server is DS 6.2 which can be downloaded selecting the Directory Server Enterprise Edition 6.x component.
Regards,
Ludovic.

WebLogic Server installation Crashing with a fatal error - SIGSEGV

Hello WLS Gurus,
I am in the process of installing Discoverer 11 and I am facing problems with launching wls1036_generic.jar installer.
I have installed installed Java 7 as follows:
cd /u02/appldisc/11.1.1/Middleware
tar -xvzf jdk-7u25-linux-x64.tar.gz
JAVA_HOME=/u02/appldisc/11.1.1/Middleware/jdk1.7.0_25
I then excuted:
$JAVA_HOME/bin/java -Xmx1024m -jar wls1036_generic.jar
and the installer crashed with this error output:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x0000003b09e14d70, pid=28328, tid=139864618293008
# JRE version: 7.0_25-b15
# Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
# Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x00007f34d03b9000): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=28346, stack(0x00007f34c4d3d000,0x00007f34c4e3e000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000
Registers:
RAX=0x0000000000000001, RBX=0x00007f34d02bea50, RCX=0x000000009e982203, RDX=0x000000001fabfbff
RSP=0x00007f34c4e39ab8, RBP=0x00007f34c4e39c00, RSI=0x0000000000000000, RDI=0x0000000000000058
Can someone help?
Thanks
Mathias

See
“Generic WebLogic Server Installer generates a Crash immediately after opening GUI on ld-linux-x86-64.so.2 Library (Doc ID 1570688.1)” which states that
“ This is an issue with AVX support appearing on newer hardware. Default glibc is incompatible with it. This problem happens due to a Red Hat Bug: Segmentation fault in dynamic loader on AVX enabled CPU “
Solution:
1. Set the following Environment Property on your active Shell.
- open a bash terminal and type in:
$ export LD_BIND_NOW=1
2. Re-Run the installer as bellow example.
$JAVA_HOME/bin ./java -jar wls1036_generic.jar
Mathias

Directory Server INstallation on WinXP

Hi all,
I have tried to install DS5.2 on my win XP PRO machine and have different problems. From my search in this forum i have found conflicting information posted around...
I have found posts that say that DS5.2 cannot be installed or is not supported on Win Xp. Others say the opposite and claim to have it working just fine. i have read that JDK 1.5 has to be installed (which i have) and other details to keep this short.
I have two problems which i would appreciate if any of you could help me with.
1. I initially installed DS5.2 just for testing purposes and then had to uninstall manually. I have removed the installation folder as well as registry entries ( To the best of my knowledge). Since then i have tried to re-install DS5.2 but the installation hangs a few steps in to the installation with a message saying " Loading Components".
Again i did a search over the forum and i found that maybe some o the files might have stayed behind (after uninstall) or that other files have to be renamed???? Can someone that has dealt with this provide some guidance?
2. In order not to mess it up again could someone help me with the right procesure for installation of DS5.2 ( provided that the problem is solved and i dont have to re-install windows all together...)?
I appreciate your time and assistance in advance.
Thanks Evan

DS5.2 can be installed and working on WinXP latest SP, as well as Win2000 latest SP.
You are not alone, search this forum for keyword "windows", there are many other issues reported for DS5.2 Windows version installation or uninstallation.
I suspect somehow DS5.2 installation/uninstallation changes/updates certian Windows system DLL files in system32 directory, and these changes causes subsequent install/uninstall issues. A related discussion is at Reply 8 of 15 of:
http://swforum.sun.com/jive/thread.jspa?forumID=13&threadID=58600
I think we may achieve the effect of uninstallation, as a last resort, by:
1) Remove DS5.2 sw componet registry keys and windows service keys
2) Remove all temp files left by incomplete installation/uninstallation by looking at %TEMP% directory
3) Remove all files under DS5.2 ROOT directory
I have a feeling that if we observe some of these guidelines, we may (or may not have) have less troubles and frustrations.
0) Read the Release Notes, Installation Noes and/or Patch Notes, don't rush.
1) Do not install DS5.2 on a domain controller, or a member of any existing domain or workgroup, to reduce dependencies on network security services, do install it on a stand-alone server.
2) Apply SP4 to WIndows 2000 prior to DS5.2 installation, or latest SP to Windows XP.
3) Make sure the display supports 256 colors.
4) Make sure Administrator account is used
5) Make sure %TEMP% directory has enough disk space
7) The default DS5.2 install root directory may contain spaces, eg: c:\Program Files\..., change it to folder name WITHOUT spaces, eg: c:\Sun\DS52.
8) Use the undocumented ".\setup.exe -debug" command to see more debugging messages.
Gary

Active Directory 2003 and Sun One Directory Server 5.2

I just installed Sun One Directory Server 5.2 on a Linux machine. I want to configure LDAP on that machine so that it can be authenticated on Active Directory 2003. How do I go about doing this?

Active Directory server is a "directory server" (and kerberos server.) If your linux client authenticates against Active Directory it doesn't have to involve the Sun Directory Server at all. You have several general approaches you could investigate:
1. Linux client gets accounts and and authentication via LDAP from Active Directory
If you use AD to handle unix LDAP authentication (opt 1) you may need to extend schema in AD to add the unix password field. I haven't tried it yet, but hope to.
2. Linux client gets accounts from AD LDAP and authorization from AD Kerberos.
There should be docs on support.microsoft.com on enabling kerberos support for non-Win clients.
3. Linux client (with samba client installed, with winbind or pam_smb to support unix level services) gets accounts and authentication as a "Windows" client from Active directory "Windows server"
Check the samba.org docn or forums- I think this is a pretty common solution.
4. Linux client gets account information from Sun Directory server but uses kerberos (against active directory) for authentication.
There should be docs on support.microsoft.com on enabling kerberos support for non-Win clients.
5 Linux client gets account and authorization from Sun Directory server, which the sun Directory server configured to use Active Directory as a Kerberos server.
Probably incredibly complex.

Not able to copletly Uninstall directory server

Hi All,
I am trying to install Portal server(7.0), directory server,access manager,with SRAG on single machine.
Start from begining I am getting the error Portal server installation failed and configuration failed.
I uninstalled through ./unistalled command and also removed SUNW Package from /opt, /etc/opt ,/var/opt/ and moved the product registery file . First time it unistalled sucessfully. Then second time i tried to installe the same , again failed .
I am trying to unistalled and i saw the summary , i am seeing that DS is patially unistalled .i removed all the SUNW packege and mps directory as define above
But Installing in next time(it means 3 rd time) it is showing DS is installed and i am going with installed DS , Then in installing process it is asking Access manager Directory server host name -I m giving some maching host name but is saying error in host name please provide correct host name.
Now I am unable in install and uninstall both is stucked now .
Can you please help me on this sitution.
Portal server version 7.0
access manager 7.0
DS(directory server) version 5.2
Thanks,

Hi,
there is a solution. I recommend to make a file included a list of all JES packages (look at JES install media), but dont remove shared_components packages, they include Solaris system packages !
http://swforum.sun.com/jive/thread.jspa?threadID=104413
Peter

Not able to completly Uninstall Directory Server

Hi All,
I am trying to install Portal server(7.0), directory server,access manager,with SRAG on single machine.
Start from begining I am getting the error Portal server installation failed and configuration failed.
I uninstalled through ./unistalled command and also removed SUNW Package from /opt, /etc/opt ,/var/opt/ and moved the product registery file . First time it unistalled sucessfully. Then second time i tried to installe the same , again failed .
I am trying to unistall and i saw the summary , i am seeing that DS is patially unistalled .i removed all the SUNW packege and mps directory as define above
But Installing in next time(it means 3 rd time) it is showing DS is installed and i am going with installed DS , Then in installing process it is asking Access manager Directory server host name -I m giving some maching host name but is saying error in host name please provide correct host name.
Now I am unable in install and uninstall both is stucked now .
Can you please help me on this sitution.
Portal server version 7.0
access manager 7.0
DS(directory server) version 5.2
Thanks,
Message was edited by:
Raja_Perumal_R

hi Raja,
THe machine name u r giving has slapd running on it ??

Can I get the Directory Server Console seperately?

I am in the process of re-doing our J2EE applications security using J2EE declaritive security as suppored by iAS6sp3.
Would like to have a copy of the Netscape Directory Server's "Console" program on my workstation(s). Is there a downloadable JAR/ZIP? Or something I can scrape off of my iAS installation? (Hmm would this console also work against other LDAPs (OpenLDAP)?)
Workstaion environmet(s): RH Linux 7.0; Sun JDK 1.3.1.02; WinNT 4WSsp6a Sun JDK 1.3.1.xx
TIA

Hello Fred,
The 4.2 Console is available as a stand alone download.
http://www.iplanet.com/downloads/patches/0046.html
There is a version for Linux there. I've used it on
my Red Hat 7.2 and Mandrake 8.1 boxes without a problem.
In regards to the Console working against other LDAP's.
The Netscape/iPlanet Console's utilize a specify suffix
called the "NetscapeRoot" or o=netscaperoot. This is where server specific (DS and ADMIN) information is stored among other info. This root, is what the Java Console uses to read and display , the GUI rendition
of the Servers. This is created , when the servers
are installed and is Netscape/iPlanet specific. I've
not heard of people using this Console against other
LDAP servers.
If you are needing a 5.x DS Console, then this may be
a bit trickier, As there are no Seperate Downloadable
Console for the 5.x platform, and that there isn't a
Linux version of the 5.x Directory Servers. I have heard of some people installing the 5.x DS on a seperate server and then taking the /java directory,
but this is not a supported method.
Some later versions of Directory Server may become
available for the Linux platform, when that
happens, you would be able to take the Directory Server installer and perform a custom install of just the
Console part on your remote work station.

Can't access my Directory Server using the Console installed on a machine

can't access my Directory Server using the Console installed on a remote server, lookied into knowledge base article 4693, but still same any idea ?

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

How to create first instance of directory server (Solaris 9).

With solaris 9 installation also installs iplanet directory server in "/usr/iplanet/ds5". But there is no instance of the directory server available.
How can I add the first instcance of the directory server.
I can not use the admin server as it requires the userid to connect which is not known to me.

Bharat,
I have used a script like the following to add a DS instance, though not on Solaris 9. I believe it should work
#!/bin/sh
cd /usr/iplanet/ds51/servers/bin/slapd/admin/bin
./ds_create -f /setup_scripts/installDataDSD02.inf
The .inf file is a silent install file which is well documented in the directory server installation documentation.
Hope this helps
-Pawan

JAAS LoginModule for SunOne Directory Server?

I have a customer who is using SunOne Directory Server for LDAP.
I have test code that uses the JAAS's com.sun.security.auth.module.JndiLoginModule to do authentication against an OpenLDAP test server.
The test code won't work at the customer site because they need to use a special userid/pw along with the subject userid/pw in order to do an authentication. I assume this is LDAP v3 stuff, but the customer is unsure. Unfortunately I have no direct access to the customer's LDAP admin folk. Typical bureaucracy stuff.
The customer was able to write java code that authenticates to his LDAP server using example code from http://java.sun.com/products/jndi/tutorial/ldap/security/ldap.html which uses the JNDI API and specifies the access userid/pw using Context.SECURITY_PRINCIPAL and Context.SECURITY_CREDENTIALS.
So thats great, however my application uses JAAS, and therfore only indirectly uses JNDI. The JndiLoginModule provided by JAAS does not appear to support the Context.SECURITY_PRINCIPAL and Context.SECURITY_CREDENTIALS parameters.
A custom JAAS LoginModule could be written which interfaces to the JNDI LDAP stuff, however considering that JAAS and the SunOne Directory server are both Sun products, I thought perhaps SunOne Directory comes with a JAAS compatible LoginModule that my customer does not know about? I've looked at online docs, but haven't found any such thing yet.

Hey dav,
Sorry that I am not posting to give you a solution - it is more to ask for some guidance.
I am implementing a client-server arch system which has a lot of 'privileged' actions to be managed. I have thus succesfully integrated the basics of JAAS in to the system... but I am now desparately looking for away to have client-side policies distributed at runtime from the server.
I do not want to get involved with any web/application server stuff more than I need to; unfortunately one of the system requirements is for client-server comms to be facilitated by SOAP over HTTP, and thus probably JAX-RPC - but it is no problem. I have a developed a database backed Policy and (JAAS) Config which constitute parts of the server component. Now it is just a case of getting the policy to the client at client start-up and subsequently the configuration forJAAS authentication. The aim is that this data will be transfered once during login, and anytime that the the policy is requested to be refreshed.
Since reading you post, I'm wondering what services LDAP or JNDI can offer me?
Also, is JNDI an appropriate option for data persistence? is it better to go with JDO or some other object store abstraction.
Kind regards,
Darren B

Publish Cert. to external Directory Server

Is there any easy way to publish certificates from CMS to Netscape Directory
Server without having to create the entry in the D.S. first? I can not find
any info about this!!

I encountered this issue now.
I create a self-signed server certificate for iPlanet Directory Server 5.1 using OpenSSL,
the error message "Either this certificate is for another server, or this certificate was not requested using this server." is reported when installing server cert.
iPlanet server must be a websit??
If you have any ideas, please offer them up. I'm in dire need here.
Message was edited by:
scui

Directory server installation on Sun Sparcstation giving errors

Similar Messages

Maybe you are looking for