Directory structure and files in Oracle Application server 10g and 11g
Hi all,
I am doing a lab migration from 10g to 11g based on the use of JAXB. There were some directory structures used in 10g to store the JAXB jar files and some other custom jar files. I want to know the equivalent folder structures in SOA 11g server. The 10g server directories are mentioned below:-
1.<OracleAS_Home>\webservices\lib.
2. server.xml located at <OracleAS_Home>\j2ee\home\config in 10g. Where can I find the equivalent file to "server.xml" in 11g server?
3. <OracleAS_Home>\bpel\system\classes\com\oracle\bpel\xml\util.
4. <OracleAS_Home> \bpel\system\classes.
Here are the equivalents as per best of my knowledge:
1. <WebLogic Home>\server\lib
For example, D:\Middleware\wls1036\wlserver_10.3\server\lib
2. config,xml located at <Domain_Home>\config\
For example, D:\Middleware\wls1036\user_projects\domains\ArunBaseDomain1036\config\config.xml
3. It should be the same as 10g (instead of OracleAS_Home, it will be ORACLE_Home) if you install the BPEL product. Since, I have not installed BPEL/SOA, I am not very sure.
4. It should be the same as 10g (instead of OracleAS_Home, it will be ORACLE_Home) if you installed the BPEL product.
Also, I would recommend that you consider using ORACLE Smart Upgrade (JDeveloper component) to help you with the upgrade process. It exactly points out these mappings of file/directory structures AND the necessary configuration changes as well.
If you are requirement, is only about making the library jars available to your application, then consider reading the below discussion.
Re: XIncludeAwareParserConfiguration cannot be cast to XMLParserConfiguration
Arun
Similar Messages
-
Installed Oracle Application Server 10g and Dev. Suite 10g to self practice
Hello,
I have Installed Oracle Application Server 10g and Developer Suite 10g on Windows XP 32.bit to practice Developer suite specially Forms and reports. Server has created the database by default.
My questions are:
1. Can i use default database for practice?
2. Which Configuration Assistants mainly i need to configure in this regard?
3. Do i need to install anything else?
I am newbie to Oracle trying to self learning.
Any help will b appreciated.
With regards,
MOHAMMED AJAZ.hi
open the following pdf it will help u too.
http://students.heinz.cmu.edu/docs/Oracle_10g_R2_Installation.pdf
Can i use default database for practice?
Did u install oracle database? if not then it will be better please install.
sarah -
Oracle Application Server 10g with 11g Database
Hi everyone,
If anyone can tell, is there any compatibility issues in Oracle Application Server 10g with 11g Database?
Will it work properly?
Thankshi,
This will be helpful,
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#CHDBFJFD
which states
"All available editions of Oracle Database 11g (11.1.0.6) or higher are supported. Please refer to Metalink note 740417.1 for details on Oracle Database 11gR1 Certification for Oracle Application Server 10g (10.1.2.x) and Metalink note 887365.1 for details on Oracle Database 11gR2 Certification for Oracle Application Server 10g (10.1.2.x) "
Regards
Fabian -
Oracle application server 10g and apex
Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AMHi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen -
Oracle application server 10g and fusion middleware 11
Hi
I am confused about architecture of application server 10g and oracle fusion middleware.
I have installed oracle application server 10g that includes infrastructure tier ( database repository,SSO,OID,DAS,OCA) and mid tier (OC4j,forms,reports,discover,portal,wireless). Here I have totally understood the architecture of 10g application server and Installation method and sequence.
But I could not understand oracle fusion middle ware architecture and components compared to 10g application server.
Now I want to install the oracle fusion middle ware same as 10g application server keep in mind.
can anybody give me high level view of oracle fusion middle ware and it's component? and also difference between 10g app server and fusion.
how can I achieve same thing that i implemented in 10g app server with fusion?
If somebody have architecture diagram of both 10g app server and fusion that will also help me.
Thanks,
VishalTake a look at Page 2-1 of the
Oracle Fusion Middleware
Upgrade guide for oracle portal, Forms and Reports and Discoverer
E10130-02
it will give you an idea -
Install Oracle Application server 10g and Oracle database 10g on same box
Hi Experts!
i need to install Oracle database and oracle application server on the same machine(windows xp).
when i install both of them and reboot the machine either oracle database or oracle application server fails...
i suspect that the problem might be due to two - ORACLE_HOME
let me know how i can resolve this issue.
Note: Oracle DB and OAS OPMN process run as a windows service.
after restart opmn fails
Many thanks in advance
-RaghavJacco, in spite of your ace :-) this time I cannot
completely agree with you:
I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
- things like ORACLE_HOME are also set in the system
environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
- the database and AS have different versions of the
RSFs. The most recent AS version is using 10.1.0.5
RSFs, where the database uses 10.2.x. This leads to
conflicts.
- Port conflicts are common in the ONS area, however
this should not prevent startup and should not be
very likely at this point since all products use the
same inventory and it should have been checked for
ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
>
With the total of our posts the problem should be
resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
(this feels like a post just to make sure that you know I respect your opinions and advices) -
Rewriterule in httpd.conf file of oracle application server 10g r1
Hi Team
we had hack in our report server which is load balanced oracle report server and to fix this we found a patch . that was to rewrite the url for report server . but problem is we have virtualhost configure in our httpd.conf file because of that rewriterule is not working is anybody good with httpd.conf file and help us with this.
contact of httpd.conf file
<VirtualHost *:79999>
ServerName xx.com
Port 80
DocumentRoot "/OraHome_1/Apache/Apache/htdocs"
</VirtualHost>
new entry we have put in
RewriteLog /OraHome_1/Apache/Apache/logs/rewrite_din.log
RewriteLogLevel 9
RewriteEngine On
RewriteCond %{QUERY_STRING} (.*)destype=file(.*) [NC]
RewriteCond %{QUERY_STRING} (.*)desname=(.*) [NC]
RewriteCond %{QUERY_STRING} !(.*)desname=/rep_des/[A-Za-z0-9](.*) [NC]
RewriteRule (.*)reports(.*)$ /forbidden.htm [R] [NC]
but still these entries are not working . it still going to old web page not to forbidden.htm
can you please help us .Hi,
Make sure the value of the NLS_LANG environment variable is compatible with the default locale setting of the operating system.
Check the below links :
http://docs.oracle.com/cd/B14099_19/core.1012/b14004/iasconfig.htm#BHCJHBBB
Postinstallation Tasks
Thanks,
Sharmela -
Oracle Application Server Forms and Reports
Dear All
I want to install Oracle Application Server Forms and Reports on windows server 2008 32-bit
how i can do that? and is there version for this new OS ?
thanks in advancedYou want to install "Oracle Portal, Reports, Forms, and Discoverer"
Fusion Middleware Installation Planning Guide B32474-12
http://download.oracle.com/docs/cd/E21764_01/install.1111/b32474/start.htm
For OS information see My Oracle Support Doc "How to Find Certification Details for Oracle Application Server 10g and Oracle Fusion Middleware 11g [ID 431578.1]"
Version 11gR1 (11.1.1.1+) can use Windows Server 2008 with SP1+
If you find this helpful please mark it so.
Best Regards
mseberg -
Reports run in LAN but not in WAN from Oracle Application Server 10g R2
Hi,
I am using Microsoft(R) Windows(R) Server 2003, Standard Edition (Version 5.2.3790 Build 3790) & Oracle Application Server 10g Release 2 (10.1.2).
I run my forms and reports in Oracle Application Server 10g Release 2 (10.1.2) successfully in client server environment. But when I run my application in WAN (our private network between different cities) then forms are run successfully but reports does not run.
i am calling reports from Forms using following code.
PROCEDURE PRINT_REP_WEB IS
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('REPORT183');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\cheema\qdir_store\reports\pmms\backlog_jobtype.RDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_pap_10gasmid');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_pap_10gasmid') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_pap_10gasmid';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;
when clients in WAN press the reports button from Form there is a message "Page can not be displayed" appear.
How can I run my reports in WAN, please suggest me solution.This sounds like a configuration issue. Are there different firewall rules that are enforced on WAN connections versus LAN connections?
Hope this helps.
Craig... -
From Forms Product Management - Oracle Application Server 10g for Windows
I've updated http://otn.oracle.com/products/forms with links to the Oracle Application Server 10g and Oracle Developer Suite 10g for Windows (which has just be released).
You can check out the new features this version of the product bring for Forms at:
http://otn.oracle.com/products/forms/pdf/10g/frm10gnewfeatures.pdf
Regards
Grant Ronald
Forms Product ManagementNice - thanks!
-
hello and hi alls,
I and two tire method , one for database and one for application server. i connect to databse ,but am i does not unserstand how deploy forms and reports on Oracle Application Server 10gR3 10.1.3 .1.0 ,pls
help me
Reagrd
Mahr Haider Iqbal
Functional & Technical ConsultantHi,
Well you just need to create a directory in paste your forms there, and then make an entry in the formsweb.cfg file and forms.conf files. Likewise there are entries for the images and report.
http://download.oracle.com/docs/cd/B28638_01//doc/frs/forms/B14032_03/basics002.htm
regards -
Urgent :- Unable to deploy EAR file in Oracle application server
Hello folks,
I am trying to deploy an application containing jsps and servlets
packaged into EAR using ant. However when am trying to do so by using
the Deploy EAR option in the Enterprise manager, it throws the
following error -
"Invalid J2EE application file specified - Jar file:
/var/tmp/jar47241.tmp is missing its standard xml descriptor located at
META-INF/ejb-jar.xml"
I suspect that something could be wrong with regards to the way the ear
file has been created.
Please if someone could pin point the problem and help me understand
the the above error message , it will be of great help to me and I d
really appreciate this.
Many Thanks,
Ramn.Hello,
I try to deploy an ear file (contains jar and war files) in Oracle Application server in linux, but the time is so long. The same file I deploy in a OAS in windows and the deploy time was 2 minutes, but in linux I leave the hole night and the session close and the deploy in unable.
I don't know if I need configure an especial option in the OAS in Linux, how I can load my ear file.
The OAS in windows was installed with oc4j options only, but the OAS in linux was full installation
Please help me....
Thanks. -
Unale to print pdf files in oracle application server using oracle forms
Hi
We are using oracle developer suite 10g(10.1.2.3.0) in Windows vista. (test environment)
Oracle application server 10g(10.1.2.3.0) in Hp-UX 11iv3 (production environment)
We are able to print pdf files in test environment from oracle forms using the below command:
host('/usr/bin/lp -d p9775hplaser '||'/ashome/output/'||:print_file);
But while declaring to the live environment it is not working
host('cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser');
but when the above command is put in hp-ux cmd prompt it is workinh"'cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser'";
Kind ly tell me whether the problem i with the host command and some other command is available for printing files from forms.Here is my guess:
declare
AppID PLS_INTEGER;
begin
AppID := DDE.App_Begin('acroread -toPostScript '||file name,DDE.APP_MODE_MINIMIZED);
end; -
Install developer10g and oracle application server 10g on oracle linux R6
i want install oracle application server 10g on oracle linux R6
in same server oracle database 10 g installed
the database 10g installed and work fine.
i try install oracle developer 10g installed .succ
but the frmbld.sh didnt work
./frmbld.sh :line 105 :/u01/u03/app/oracle/product/10.2.0/db_1/bin/frmbld:cannot execute binary file?
have two user oracle for database ,oradev for developerthx
can give me any link
any one can help me on application server 10 in oracle linux R6? -
Run Oracle Web Logic and Oracle Application Server 10g on same server
Since oracle has chosen to release adf faces 11g, before the SOA suite 11g is released, we are facing the challenge to run both Oracle Web logic and Oracle Application Server 10g on the same server.
If anyone have any experience in this setup or has knowledge of other feasable setups please let me know.
Regards.
JanWhat version of Oracle Application Server 10g are you installing?
If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
Thanks
Shail
Maybe you are looking for
-
Adobe forms, non-interactive (HR)
Hi, I'm trying to get in touch with SAP web applications (webdynpro, adobe form, bsp...). I have the following requirement: I have to provide a page within the sap enterprise portal to allow the employee to track his presence. In this page the employ
-
Running CS 5.5 Design Standard on OS 10.8.2
I attempted to download my purchased Adobe Creative Suite 5.5 Design Standard to MacBook, running OS 10.8.2. When I try launch, it shows: DesignStandard_CS5_5 not recognized. Do I need an version upgrade to run on this system?
-
How to set a default open with, for all files
I would simply like to make all my .avi files to open with VLC, rather than Quicktime. I have done the "change default open with", but it's only for that file. Any way to make all avi's open with VLC? Thanks!
-
Trying to learn how to setup Linux Domain with Linux client
Okay I know I might get some problems for this, but I am trying to setup a ubuntu based server (domain), with an arch based client. I am having a hard time getting the two to cooperate and working with centralized passwords and roaming profiles. I
-
Hi, I'm having problems running axis2 in OC4J. I was using axis2 in Tomcat server and I had no problems. I used to develop the web services and then deploy them in the axis2 (running in Tomcat). That worked alright. So now I want to run the same web