Disable a field in a Table layout based on the condition
Hello,
In the seeded page, there is a table layout region with viewobject name as View1. It has 3 fields displayed as Field A, Field B, Field C with multiple rows displayed when the page opens. Fields B and C are MessageTextInputs and Field A is MessageChoice. So in the displayed rows in the table, if the value selected in the Field A is "Bonus" then the fields B and C needs to be disabled so that the user should not be able to enter any information. So if there are 5 rows in that table, only 1 or 2 rows might have the value "Bonus" in the field A and only for those rows, fields B and C needs to be disabled.
I would appreciate if anyone can provide me with a logic. I know how to disable a field based on the value of other field but in this case here, its a table region with multiple rows and only few of them needs to be disabled. I couldn't think of any logic here. Any help is greatly appreciated.
Thank You
KK
Similar problem
Re: How to make Advanced table readonly
Similar Messages
-
Creation of internal table dynamically based on the Date Range entered
Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram KandulaHi Sivaram,
I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fCAT1
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
select vbeln
fkart
vkorg
vtweg
fkdat
spart
fksto
from vbrk
client specified
into table gt_vbrk
where mandt = sy-mandt
and fkart in ('ZF5','ZFR')
and vkorg = '1100'
and vtweg = '20'
and fkdat in s_fkdat
and spart = '06'
and fksto = ' '.
if gt_vbrk[] is not initial.
select vbeln
fkimg
prsdt
netwr
matnr
arktx
werks
mwsbp
from vbrp
client specified
into table gt_vbrp
for all entries in gt_vbrk
where vbeln = gt_vbrk-vbeln
and werks in s_werks
and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
name1(3) type c,
s_month type string,
s_month1 type string,
s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
loop at gt_vbrp into gs_vbrp.
gs_final2-matnr = gs_vbrp-matnr.
gs_final2-arktx = gs_vbrp-arktx.
gs_final2-fkimg = gs_vbrp-fkimg.
lv_month1 = gs_vbrp-prsdt.
read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
if sy-subrc eq 0.
name1 = wa_t247-ltx.
endif.
concatenate name1
lv_month1(4) into s_month SEPARATED BY '_' .
CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
gs_final2-month = s_month.
lv_netwr1 = gs_vbrp-netwr.
lv_mwsbp1 = gs_vbrp-mwsbp.
gs_final2-MONTH_QTY = S_MONTH1.
GS_FINAL2-MONTH_VAL = S_MONTH2.
gs_final2-value = lv_netwr1 + lv_mwsbp1.
append gs_final2 to gt_final2.
clear: gs_final2. "lv_name2.
endloop.
if gt_final2[] is not initial.
sort gt_final2 by matnr month ascending .
loop at gt_final2 into gs_final2.
gs_final2_01 = gs_final2.
collect gs_final2_01 into gt_final2_01.
endloop.
endif.
ENDIF..
Regards
Ankur -
HT201472 can apple disable any activity on my stolen IPAD based on the serial number
can apple disable any activity on my stolen IPAD based on the serial number
No.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
Can we take standard report for all sales orders based on the condition typ
Hi all,
Based on the condition type, we need to take a report for sales orders on the particular date.
Thanks and Regards.....VMHello again.
Searching for a solution, I found a Logical Database for sales orders, that have all the information that you need.
Using like reference the post of Bhagavatula, in the same transaction SQVI you can use, instead of the suggested join, you can select a logical database called VAV in Data source.
This logical database links the tables, VBAK, VBAP, VBUK and KONV that is the central point of the question.
You can list the information of logical database using the transaction SLDB.
In 'Logical Database' inform VAV.
Press F8 to list all the fields.
More information about logical database in:
Link: [SAP Logical Database|http://help.sap.com/saphelp_46C/helpdata/EN/9f/db9b5e35c111d1829f0000e829fbfe/content.htm] -
Inserting new columns based on the condition!
Hi guys,
I have a very simple query like the following…
SELECT table2.column_code2,
table2.column_description2,
table2.column_code1,
table1.column_description1
FROM database_001.table2 table1 LFET OUTER JOIN database_001.table2 table1 on (table2.column_code1 = table1.column_code1)
From this query, its returning me a result set of something like below:
column_code1 column_description1 column_code2 column_description2
RO1 BOOK RL1
PDF/ECOPY
RO2 PAPER RL2
CONFERENCE
RO5 JOURNAL
RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (sorry, I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also,
if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write
‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…I hope someone can help me into this…thanks a lot…
status location
contact
ONLINE WEB
BOB
ON PRESS FOR PRINT S.R STREET, LONDON SMITHHi artistdigital,
you can use case statment for same in sql server. MSDN link - > http://technet.microsoft.com/en-us/library/ms181765.aspx
Try code like this:
SELECT table2.column_code2,
table2.column_description2,
table2.column_code1,
table1.column_description1,
case when column_code1 = 'RO1' and column_description2 = 'PDF/ECOPY' then 'ONLINE'
when column_code1 = 'RO5' and column_description1 = 'PDF/ECOPY' then 'ON PRESS FOR PRINT'
end as [status],
case when column_code1 = 'RO1' and column_description2 = 'PDF/ECOPY' then 'WEB'
when column_code1 = 'RO5' and column_description1 = 'PDF/ECOPY' then 'S.R STREET, LONDON'
end as [Location],
case when column_code1 = 'RO1' and column_description2 = 'PDF/ECOPY' then 'BOB'
when column_code1 = 'RO5' and column_description1 = 'PDF/ECOPY' then 'SMITH'
end as [contact]
FROM table2
join table1
on table2.column_code1 = table1.column_code1
Regards Harsh -
Need to show the images in calculated column based on the condition in sharepoint 2013.
Hi ,
I'm working in sharepoint 2013, In this i want to show an image in calculated column based on the condition, but image is not showing .
In sharepoint 2010 its working with help of javascript in content editor on the same page. Same thing i tried in SP 2013. but doesn't work.
Could any one please give proper solution for this?
Thanks in advance.
by,
Siva.Hi please provide the JS you have used in the content editor as well as the calculation for the column so we can better understand what's maybe differs?
Blog: chrisstahl.wordpress.com Twitter:
@Cstahl -
How to disable fields in BP-ACCOUNT MANAGEMENT based on a condition in UI
Hi
Good Day
I have a requirement wherein I need to disable few fields in'General Data" and "Main Address and Communication Data"
in "Account Management" while changing the "Account Details" in CRM UI(web) for a particular Account Group.
Can anyone help me how can we do this, since I'm new to CRM i'm unable to find the solution for the same.
Regards
AnilHi Anil,
Click on F2 in Web UI in the relevant field.
Get the Technical Details such as names
Component
View
Context Node
Attribute
Go to TX bsp_wd_cmpwb
Give the Component name and Enhancement set
Go to corresponding view.
Doubleclicking on view on the right side u get structure of the view.
Expand Context
then expand relevant context node
then relevant attribute
you can find the GET_I_ATTRIBUTE Method
method GET_I_ATTRIBUTE.
rv_disabled = 'TRUE'.
endmethod.
Check if rv_disabled = 'TRUE'
if then change rv_disabled = 'FALSE'.
Before seeting rv_disabled = 'FALSE' check the condition for which you want to make it disabled.
Regards,
Sijo. -
DYNAMIC INTERNAL TABLE CREATION BASED ON THE CONTENT OF ANOTHER INTERNAL TA
Hi All
I need to create an internal table at runtime.
I have a selection screen parameter which is specific to country, Which can take values below
eg:- IT_AREA for Italy(IT)
FR_AREA for France(FR)
IE_AREA for Ireland(IE).....And similary for other countries
Based on the Above parameter, I need to create Internal Table as below
DATA: itab TYPE italy_data Occurs 0.
If I declare as above, Then itab has fields from italy_data. And this internal table i will be sending it to Function Module to get data into it.
My Requirement is to Create the Internal table itab during runtime for tables italy_data OR france_data OR ireland_data based on selection screen parameter. Tables on Country may have different number of fields in it.
Can anyone help me on this??Hi,
Here is a sample code to create a dynamic internal table.
REPORT ytrab03.
TABLES: mara, makt.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
DATA: e_params LIKE zutsvga_alv_01.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
PARAMETERS: p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
is_fcat-fieldname = 'COL01'.
is_fcat-ref_fieldname = 'MATNR'.
is_fcat-ref_tabname = 'MARA'.
APPEND is_fcat TO it_fcat.
is_fcat-fieldname = 'COL02'.
is_fcat-ref_fieldname = 'MAKTX'.
is_fcat-ref_tabname = 'MAKT'.
APPEND is_fcat TO it_fcat.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
CONCATENATE is_fieldcat-ref_table is_fieldcat-ref_field
INTO vg_campos SEPARATED BY '~'.
APPEND vg_campos TO i_campos.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
SELECT (i_campos) FROM mara INNER JOIN makt
ON mara~matnr = makt~matnr
UP TO p_max ROWS
INTO TABLE <l_table>.
LOOP AT <l_table> INTO <l_line>.
LOOP AT it_fcat INTO is_fcat.
ASSIGN COMPONENT is_fcat-fieldname
OF STRUCTURE <l_line> TO <l_field>.
IF sy-tabix = 1.
WRITE: /2 <l_field>.
ELSE.
WRITE: <l_field>.
ENDIF.
ENDLOOP.
ENDLOOP.
Regards,
Karuna. -
Field symbols as Table name and in where condition in a select statement
Hello All,
I have a scenario where I need to get user input on table name and old field value and new field value. Then based on user input, I need to select the record from the database. The column name for all the tables in question is different in the database, however there data type is the same and have same values.
I am not able to use a field symbol for comparing the old field value to fetch the relevant record in my where clause.
I cannnot loop through the entire table as it has 10 millilon records, please advice on how to add the where clause as field symbol as the table name is also dynamically assigned.
Here is my code:
DATA: TAB LIKE SY-TNAME,
TAB_COMP1 LIKE X031L-FIELDNAME,
TAB_COMP2 LIKE X031L-FIELDNAME,
NO_OF_FLD TYPE N.
DATA: BEGIN OF BUFFER,
ALIGNMENT TYPE F,
C(8000) TYPE C,
END OF BUFFER.
FIELD-SYMBOLS: <WA> TYPE ANY,
<COMP1> TYPE ANY,
<COMP2> TYPE ANY.
GET TABLE NAME GIVEN BY USER IN LOCAL VARIABLE
TAB = TAB_NAME.
CREATE FIELD NAME BASED ON THE TABLE NAME ENTERED.
CASE TAB_NAME.
WHEN 'OIUH_RV_GL'.
KEY FIELD
TAB_COMP1 = 'GL_GL_SYS_NO'.
NO_OF_FLD = 1.
WHEN 'OIUH_RV_OPSL'.
KEY FIELD
TAB_COMP1 = 'OPSL_GL_SYS_NO'.
NO_OF_FLD = 1.
WHEN 'OIUH_RV_OTAX'.
NOT THE ONLY KEY FIELD
TAB_COMP1 = 'OTAX_GL_SYS_NO'.
TAB_COMP2 = 'OTAX_TAX_POS_NO'.
NO_OF_FLD = 2.
WHEN 'OIUH_RV_GTAX'.
NOT THE ONLY KEY FIELD
TAB_COMP1 = 'GTAX_GL_SYS_NO'.
TAB_COMP2 = 'GTAX_TAX_POS_NO'.
NO_OF_FLD = 2.
WHEN OTHERS.
EXIT.
ENDCASE.
SET FIELD SYMBOL WITH APPROPRIATE TYPE TO BUFFER AREA.
ASSIGN BUFFER TO <WA> CASTING TYPE (TAB).
How to add where clause and remove the if condition in the select -- endselect
SELECT * FROM (TAB) INTO <WA>.
ASSIGN COMPONENT TAB_COMP1 OF STRUCTURE <WA> TO <COMP1>.
IF NO_OF_FLD = 2.
ASSIGN COMPONENT TAB_COMP2 OF STRUCTURE <WA> TO <COMP2>.
ENDIF.
IF <COMP1> = OLD_SYS_NO.
code for updating table would come here
WRITE: 'MATCH FOUND'.
EXIT.
ENDIF.
ENDSELECT.
Please advice. Thanks much.
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:33 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:34 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:35 PM1. Create single column table for holding field name depending on the table entered.
2. Take input from user: for e.g. table_name
3. Using case load single column table with required fields
for e.g.
CASE TAB_NAME.
WHEN 'OIUH_RV_GL'.
Append 'GL_GL_SYS_NO' to KEY_FIELD --> KEY_FIELD is the single line internal table as mentioned in step 1.
WHEN 'OIUH_RV_OPSL'.
Append 'OPSL_GL_SYS_NO'.
WHEN 'OIUH_RV_OTAX'.
Append 'OTAX_GL_SYS_NO' to KEY_FIELD.
APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
WHEN 'OIUH_RV_GTAX'.
Append 'GTAX_GL_SYS_NO' to KEY_FIELD.
APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
WHEN OTHERS.
EXIT.
ENDCASE.
Now depending on the table name you have required column ready
4. Create dynamic internal table using following sudo code
Fill the fieldcatlog using the single column field table and DD03L table, See what all columns from DD03L you want to fill in field catlog table
loop at internal table with all the fields.
move it to field catalog.
append field catalog.
endloop.
5. Pass this field catalog table to static method create_dynamic_table method
DATA table TYPE REF TO DATA. --> data object for holding handle to dynamic internal table.
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = fieldcatalog_tab
importing
ep_table = table.
6. Now assign table reference to field symbol of type table.
ASSIGN table->* to <field-tab>.
7. Also create work area <field-wa> using refrence of table.
create data object wa LIKE LINE OF <field-tab>.
ASSIGN wa->* to <field-wa>.
8. Also define field symbol for field name.
for e.g. <field_name>
4. Dynamic internal table is ready
5. Now execute the select statement as follows:
SELECT (KEY_FIELD)
INTO <ITAB> --> created dynamically above
FROM (TABLE_NAME)
WHERE (WHERE). --> WHERE is single line internal table having line type of CHAR72. So for every old value there will be one line
Where condition is same as like we give in static way only difference in this case it will stored in internal table line wise.
In this case you need to append all your where condition line by line in to WHERE.
5. To fill this dynamic internal table using ASSIGN COMPONENT <Comp_number> OF STRUCTURE <field-wa> TO <field-name>
So in this case if first field of structure STRUCT1 is user_id then sudo-code will be
loop at internal table containing list of fields into field_wa --> single column field table
ASSIGN COMPONENT field_wa OF STRUCTURE <field-wa> TO <field>. "Here field_wa is wa area for single column internal table holding all the fieldnames.
Now <field-name> points to user_id field. Move some value into it as nornally we do with variables.
Move <your_new_value> to <field-name>. --> Assign new value
or
<field-name> = <your_new_value>.
Endloop.
6. After completing all the fields one row will be ready in <field_wa>.
APPEND <field_wa> to <field_tab>.
Hope this helps you.
Thanks,
Augustin. -
How to identify field names and table names as per the client requirement
Dear All,
i am preparing reports for my client of their own requirement, but in sap how can i find the field name, table names like for eg: doc.no, issue,revision no, revision date, date of issue,date of completion, job card no,identificatin no, part no , accept,inspected,testedby, remarks, issue, process.
so please tell what is the path to find the field names and table naeHi,
You can select the field which field name and table you want to know, just press F1 button, one more window will open. There you need to select the technical information icon, then you will get the required field name and its table.
Regards,
V. Suresh -
Make field in Material master mandatory based on the material group
Hello all,
I need to make the field "post to inspection flag" mandatory based on the material group while creating the Material master.
I found options for making the field mandatory based on Material type,Industry sector and plant NOT based on the material group.
Could anyone please provide suggestions on setting up the field as mandatory based on material group while creating material master
Thanks,
SreHi Sre,
You can make Material Group field as Mandatory while Creating Material Master.
SPRO>Log General>Material Master>Field Selection>Maintain Field Selection for Data Screens
Select Screen # 48
In the Field selection (Field Ref.) of (MARA - MAKTL) screen , Change the settings from Optional to Required Entry for T Codes MM01, MM02 or you can select the Material Type ;
Please note this by choosing this selection the fields of Profit Center and Division will also become Mandatory.
Hope this helps,
Best regards
Amit Bakshi -
Calling two table controlls based on some conditions......
I hav a requirement in which i have two table controlls, which i want to call based on some conditions. Like if condition is satisfied the first table controll shud fill up the screen and other wise the secondtable controll shud fill the screen....
Hello,
In the main screen where u need to vary with the 2 table controls , create a subscreen area .
Now create two subscreens with the required table controls respectively.
You can dynamically call the subscreens accordingly for the conditions.
Hope this may help you.
Neeraj -
Regarding dynamic changes in the layout based on the data received
hi,
i am trying to design an application using flex at the frontend and what i want is that based on the inputs given on the client-side the data received from the back end should change accordingly like the no of panels showing a particular information can vary depending upon the data and has to be adjusted
in a limited given space.how can i be able to acheive this dynamic display and change on the frontend arrangement of panels.
thanksHi Naidu,
In the Second Screen first Create all 15 Fields.
in PBO of Second Screen.
module STATUS_100.
In Program
Module status_100.
case FIELD_VALUE.
when 'X'.
loop at screen.
if screen-name = 'SCREEN_NAME' " The Field which you dont want.
screen-invisible = 1.
screen-active = 0.
modify screen.
endif. " Similary process for other Values aswell.
endloop.
endmodule.
Just you need to do little bit more work since this gives a clear Idea as how to proceed.
CHeerz
Ram -
This is the first time I've run into this, but it appears that SSRS is setting the text-align based on the other cells in the column. I have cells being set with either a dataset item of type System.Double or to "--" when Is Nothing evaluates
to true. I never noticed before that if the majority of the cells in the column are Nothing, then the few that aren't Nothing get aligned to the left along with all of the "--" text items. And now I also see columns where the opposite
is also happening, where if the majority of the cells in the column are numeric values, then everything is aligned right, even the few "--" items there. I'm only using Default TextAlign and VerticalAlign, and no Indent, SpaceAfter or SpaceBefore,
nor any concatenated text or embedded preserved spaces.
Has anyone else in the SSRS universe seen this, and does anyone know why or have a good workaround for it?
Thanks in advance : )Are you viewing the report in html format or are you looking in some other format like Excel,CSV etc?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
How do i export the table data based on some condition for backup
Is is syntax correct
exp scott@orcl92 file=emp_29aug.dmp tables=emp
query=\"where emp_no in (1,2,3,4) \".
How do i take the backup of more than one table?
what is the syntax for that
ThansThanks for your response
If i want to add more than one condition in the query, then how do i do that
exp scott/tiger@orcl file=scott.dmp tables=(emp, dept) query=\"where deptno = 30\" and emp_no in (1,2,3,4);
how do i do that
Maybe you are looking for
-
Itunes won't open on a new MacBook
I just completed my Time Machine installation on a new MacBook Pro from a backup from my old MacBook. Everything is working fine except that when I open Itunes, it keeps quitting unexpectedly and never opens up. Has anyone else had this problem?
-
Problems installing pse 8 on macbook pro
I'm trying to install pse8 on my new Mac Book Pro and keep getting an error message saying that Firefox is running and I cannot install until that program is closed. Only problem is firefox is not running. Has anyone come across this problem before
-
Query Designer: Formula Variable
Would like to check how to use the formula variable for key figures? I have created a formula variable and attached in the formula. How this variable be filled? I have given the properites as manual input but system gives exception error when query i
-
How to order/get top 10 records of Business Object
Hi Guys, I need some help here. Im trying to find out how should I go about ordering my return results by .findByMultipleParameters. Is there a simple method to also get eg. top 30 records after sorting the results? There are some new class - OrderBy
-
PR Release date in TAB Quantity/Dates
Hi Experts , When i am creating a PR then In the TAB>Quantity/Dates the release date is coming same as the delivery date . As per my opinion it by default should be same as the PR requested date .and when it release by( me54 or me55) .then it will up