Disable Auto-Rotation in OCR Process (Acrobat 9 Pro)

Is there a way to disable the auto-rotation step as part of the OCR process? I have documents which I assemble in from images of tables. (If I had acces to the text of the tables, I wouldn't be using images of them). I place each screenshot in the correct orientation, but when I have Acrobat 9 Pro OCR the document, it auto-rotates many pages into the wrong orientation (some 90° clockwise; others 90° counterclockwise and some 180°). Since Acrobat is horribly confused by what it is seeing, I need to disable the auto-rotation part of the process so that it will OCR what it finds exactly as it finds it.

Very likely the pages of interest have a least one character of renderable text. This might not be readily seen by you or me but it'd be there.
Acrobat's OCR will not process a page that has any renderable text.
Be well...

Similar Messages

  • Cannot Disable Auto-Rotat​e on Twist s230u

    I want to completely disable the screen auto-rotation on my Twist s230u and prevent it from re-enabling at all.  The only modes I use it in are tablet mode or laptop mode, so I have no use for this.  Is there a way to do this?
    The checkbox under the Screen Resolution section of Display Properties doesn't seem to do jack.  The screen still rotates when this is unchecked.  I've also rolled back the driver of the Lenovo PM Device from 1.67 to 1.66 as per this thread.  Can't say I've noticed a difference after this either.
    Any other ideas?  Thanks.

    Dear Redv
    Welcome in lenovo forums
    All what you need to Disable the auto Rotate Screen is to press on the highlighted button as shows below :-
    - There is anotification massage will be dispayed to confirming that the auto rotate disabled
    Let me know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Batch Processing - Acrobat XI Pro - Freezed

    HI eveyone,
    I am trying to do Batch Processing in Acrobat XI Pro the same i do with Acrobat 9 PRO. What i aim to achieve is to Export the PDFs to PostScript but when working on a bigger volume ( more then 700 letters) it freezed up. Normally we are working with 3500 letters per batch. Any resolution to this?
    or am i doing the wrong procedure on doing the batch processing in XI Pro?
    here is my procedure: New Action Wizard > Save & Export > then i specify my settings to convert my folder to PostScript.
    please help..
    thanks
    anthony

    I had a discussion on these forums about this subject with an Adobe employee when the new version just came out and told him that it's not suitable for mass processing files. His reply amounted to saying that it wasn't meant for that, but for running macro-style sequences on small batches of files... In other words, it appears to be a "feature", not a bug. Let's hope it will improve in the next version of Acrobat...

  • Disabling auto rotate,Win 7,HP probook 470

    As in the title,I have a "problem" with my newly bought Hp Probook 470.When I physically rotate the laptop,the screen rotates along with it.I have tried for hours looking in the internet and gathering information,but I can't seem to disable this thing.I don't have the "Enable" option in the screen resolution for some reason ( http://software.intel.com/sites/default/files/styl​es/large/public/arimage_0.png ),so I think this is the problem.
    Is there anything else I can do ?

    I've heard some guy fixed it on his 4740s by uninstalling HP 3D DriveGuard and rebooting. Perhaps it has something to do with the motion sensor, and the only one is used to trigger the DriveGuard.

  • DISABLE AUTO ROTAtion

    I am unable to download the software (Paid) from  .Through Ajani InfoTech Private Limited  or  From VirtualViews.com , through  http://appworld.blackberry.com/webstore/content/1861 . It again and again takes me to LOG-IN page. Any help from anybody ?

    Click the home button twice and a multi tasking bar will pop, slide your finger to the right on the bottom and you will see a rotation lock

  • OCR on Acrobat 9 Pro not working - will not explain why.

    I ran the OCR function on multiple 500-page PDF documents for an upcoming project. For the most part, the OCR worked. However, OCR DID NOT work on specific pages within the documents (would usually happen once or twice every few thousand pages). I went back through the PDF documents to try and run the OCR on the individual pages that did not work the first time, and the screen showed the following error: "Acrobat could not perform recognition (OCR) on this page because:". There was nothing else in the error box - no explanation as to why OCR would not work on those individual pages.
    Has anyone else had luck with this problem? I would really appreciate any help I can get.

    Very likely the pages of interest have a least one character of renderable text. This might not be readily seen by you or me but it'd be there.
    Acrobat's OCR will not process a page that has any renderable text.
    Be well...

  • How to hide/disable menu items using Javascript in Acrobat 9 pro or later

    We just wanted to know on how to hide/disable menu items for e.g. 'Open' menu item under 'File' menu in Acrobat 9 or later on Mac using Javascript. It would be useful if you could provide if any other option is in place already.

    Not sure it will work, but you can try using the app.hideMenuItem() method. See reference here.

  • Auto rotate disabling

    Is there a way to disable auto rotate feature in Safari? I sometimes prefer to read while lying down on the side. It would be really nice to disable this feature then.

    I wholeheartedly agree with this. I always sleep on my side, and occasionally I'll use my iPod in bed, reading news or e-mail or something, and it's really hard to get it in a good position for reading. I think for some apps (The New York Times app, I think) there's a way in Settings to lock the orientation. But what I'd really like to see is a universal gesture for locking orientation that would work across all apps (i.e. programmed into the OS), or at least all apps made by Apple. I think drawing a circle would be a good gesture for this, or maybe a circle with a line through it.
    Any thoughts? I submitted feedback to Apple about this; everybody else should too so that it gets included in 3.2!

  • Disable Auto Orientation only in a specific frame!

    Hi there! 
    I appreciate if you please guide me with your experience in Mobile App design.
    My App contains 5 frames of data (movieclips), that each frame has 2 designs:
    1- Stand mode design    (portrait)
    2- Wide mode design     (landscape)
    So far it works great and I have published my App both on Google Play and Apple Store.
    Frames structure is as follows:
    frame   1            Loads External Data
    frames 2-6         Each frame contains 1 MovieClip designed based on mobile "Stand mode"
    frames 22-26     Each frame contains 1 MovieClip designed based on mobile "Wide mode"
    (Example: contents of frame 2 and 22 are the same, also 3 & 23 ... 6 & 26)
    (frame 2 is STAND design, 22 is WIDE design, and so on)
    In "Air Setting Dialoge", I have selected aspect ratio "Auto" and "Auto orientation".
    And I have this code in Frame 1 to do the rotation trick:
    stage.addEventListener(Event.RESIZE, resizeLayout);
    function resizeLayout(e:Event):void
                   setPosition();
    function setPosition():void
            //Phone turned from "Wide" to "Stand"
                   if (stage.stageWidth < stage.stageHeight)
                                  //App is now in "Wide" mode - means between frame 22 to 26
                                  if (currentFrame>20) 
                                                 //go to the same position of App but in "Stand" mode
                                                 gotoAndStop(currentFrame - 20);
                   else
                                  //Phone turned from "Stand" to "Wide"
                                  if (currentFrame<20)
                        //go to the same position of App but in "Wide" mode 
                         gotoAndStop(currentFrame + 20);
    Well, and finally my question:
    1- Is this way I have programed my App to rotate, a proper approach?!
          (in this way I can easily arrange objects on screen and also position them based on math calculations)
    2- If I want to disable auto rotation only when app reaches specific frames, what should I do??
       (for example I want the app Not to auto oriente in Frame 6 and 26., but it rotates in other frames)
    Hope it was not confusing and I cant wait to check out your valuable guidance!
    All the best and thanks a lot for your time.

    Hi there all!!
    Still I have no answer for my question No1, BUT I could find my answer to the 2nd question and here it is for your kind notice:
    Special thanks to Daniel Dura
    http://www.adobe.com/devnet/flash/articles/screen_orientation_apis.html
    I just added this code to my first Frame:
    stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, onOrientationChanging);
    function onOrientationChanging(event:StageOrientationEvent ):void
              if (currentFrame == 6 || currentFrame == 26)
                        event.preventDefault();

  • Ihpone camera app auto rotation

    Can you please add a function that disable auto rotation in camera roll. Extremely annoying when you take horizontal pictures and the phone dont understand to stop rotate when you turn the phone.
    thanks.

    Go to camera app-make sure you are on manual mode-tap on 3 dots (settings) -quick launch-off.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Disabling the auto rotation while doing OCR

    how can i disable the auto rotation function while doing OCR?

    It does this to improve the OCR but if you can choose Searchable Image (Exact) under the PDF Output Style in the Recognize Text - General Settings dialog it won't deskew the image.

  • I cannot find a means to disable the rotation feature in Acrobat XI and it is driving me crazy.....it rotates in every which way without provoking it at all.  Such an annoyance.

    does anyone know how to disable the auto rotate feature in Acrobat XI?

    You should have to interact with the Rotate tool in order to get it to work:
    Clicking Rotate:
    Should bring up an interactive dialog box:
    ...if pages are "auto-rotating" then something is seriously wrong. You can try uninstalling and reinstalling Acrobat Pro XI, making certain that you upgrade to the latest version (11.0.06). If that brings no solution, contact the Adobe Users Community -> http://acrobatusers.com/.
    Odd problem - never experienced anything like it nor heard of others having such problems. You'll get quick answers, I think, if you take your question to the Acrobat community.
    Good luck,
    Clinton

  • Applescript auto-OCR with Acrobat 9

    on adding folder items to
         tell application "Adobe Acrobat Pro" to activate end
         tell application "System Events" to tell process "Acrobat"
              click the menu item "Recognize Text in Multiple Files Using OCR..." of menu 1 of menu item "OCR Text Recognition" of the menu "Document" of menu bar 1
              -- Here I need help. The following commands won't work.
              -- click button "Add Folders..." of window "Paper Capture Multiple Files" isn't working.
              -- After that I have no idea how to select a folder
              click button "Choose" of window "All supported files under selected folder and subfolders will be added"
              click button "OK" of window "Paper Capture Multiple Files"
              click button "OK" of window "Output Options"
              click button "OK" of window "Recognize Text - Settings"
         end tell
    end adding folder items to

    Whenever I open a new pdf in 9.0  pro the program seems to scan it to create an
    OCR version. It is annoying when time is short - I usually hit <Cancel> but
    how can I permanently turn this feature off, or can I?
    Frank

  • Auto-rotate function disabled with v20 update on N...

    Has anyone who's updated to v.20 on the N97 experienced a disabling of their auto-rotate functionality. I've been looking for some info on this but am not getting much on it. I know two peope who updated and the feature has literally vanished from the handset. Any advice or suggested fixes?
    Solved!
    Go to Solution.

    Can you not find it under
    settings > Phone > Sensor settings > Turning Control? If you can't find there then maybe reinstall the firmware.
    Good luck
    Message Edited by phatdumi on 03-Nov-2009 11:53 PM
    Hit Kudos if I Helped out.
    Nokia 3310-> 8810->N95->N95 8Gb->
    Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

  • Auto Rotate Disable for Photos ....... Sort-of ..... Trick / Tip

    I have many photos and many are in the wrong Rotation in my Ipod and wanted to disable the Auto-Rotate feature but no luck since Apple forgot to Add the feature to turn it off.......(STUPID APPLE) but no worries, Apple will add it to a future update and charge you for it!.
    But I have found an easy way to show off my photos in the right orientation and disabling/tricking the feature momentarily and Here is how I do it:
    Open the Photo you desire that has the wrong orientation.
    Hold the Ipod/Iphone in the orientation where the Photo is in the right Position,( i.e: if your photo is in landscape while holding it in the upright position.).
    All you have to do now is, with two fingers touch and hold near the bottom of the screen as close to the edge of the Ipod/Iphone as you can, so you can still see 95% of the Photo and then Rotate to the right orientation and there you go! your photo remains and does not Auto Rotate, keep holding until you have shown the photo to your friends.
    All this does is to freeze the photo, simply put, it is thinking you are either enlarging or going to the next photo, it doesn't disable the feature it is simply waiting for you to make a decision.

    As of 10.1.2 we no longer talk about "auto-rotate and center". Page scaling for 1-up output is always registered to the center point, and the new dialog only refers to orientation.
    Ultimately of you want a page to be printed at 100% physical scale, you need to supply users with a PDF that has the correct paper size and margins wide enough to stay within their printer working zones. In that case, the setting for scale and rotate is meaningless, as "fit", "shrink" and "actual" will all equal 100%. If the paper size matches, rotating a page has no bearing on the X/Y position - it's there to handle cases where the document is portrait but the printer tray is landscape, or vice-versa. If for example you open a US Letter portrait page and "force" it to print in landscape to a printer with a portrait feed tray, it is not rotated and squished into the middle of the page - aside from coming out the machine sideways it'll look no different.

Maybe you are looking for

  • How to add a field in Payslip

    Dear friends, We created a field in Infotype 0001 to capture the detail of which section of the department the employee belong to... And our abapers were successful in creating it when we give data it gets updated.. Now we have to bring that in the p

  • BLOB Columns Inserts/Updates ???

    Please let me know how SQL*Loader can run updates to just the blob columns without truncation/replace. We want to do incremental updates to the BLOB column without truncation/replace. If this is not possible please let me know any other process which

  • Re: (forte-users) Forte and CORBA question

    Hi, The discarding the Java variable that references a distributed Forte object doesn't cause that the distributed object will be reclaimed. In Forte client you can use ReleaseDistReference() of the current partition (task.part) to free the remote ob

  • Add custom drawn shapes to Brush

    In CC 2014, Flash allows you to create a "custom" brush of a slanted circle or square. A start, but I also need to use brushes with jagged or softer edges. If I could create a brush out of a vector image I've painted, then I could do more with the br

  • Popup not in specified Component, but in main JFrame

    Hi, how do I make a popup appear inside the Component "owner" that is given as parameter to the show method? I have a JFrame containing a JPanel component in a GridBagLayout. The JPanel has a MouseListener, causing "MousePressed" to show a popup with