Disable key sounds

Is there a way to disable key sounds when typing? There are many environments where this could be useful. I tried enabling the airplane mode, but that didn't help. Thanks.

allamb wrote:
Settings -> Sounds -> Keyboard Clicks
Don't remember seeing this one earlier, must be new since 1.1.1.
No that's been there since the first Firmware version as it was the first setting I modified when I activated the iPhone lol

Similar Messages

How do you disable key beeps?

Is there a way to disable key beeps on a device (NGage) using J2ME? When a user hits the softkeys in my application the system still plays a beep sound, which I want to disable.
Thanks in advance.

Someone out there must know?

MS-6580/845PE - how to disable the sound on board ??

Hello and good morning !!
I got the above mainboard and a Intel Pentium 4 / 2,53 Prozessor.
Now I want to install again my soundcard "Soundblaster Life Player 1024" !! How can I disable the sound-on-board on the mainboard ??
I tried to install soundcard but the pc shows a "heavy exeption fault"!!
Is there somebody who can help me please ?? 8o

do you know how to get into bios,delete key at boot
then look for section i said and sound will be in there
read bios part of manual

How do I disable the sound effect on my MacBook Air when adjusting the volume

how do I disable the sound effect on my MacBook Air when adjusting the volume

Thanks Ralph, that fixed it, I did uncheck that box earlier however I had not restarted the computer. Thanks again.

Disable all sound from application

Hi,
I need to disable all sound or volume from my application upon a button press. I have a html component within my app that i need to be muted, for example if the user loads the youtube website and selects a video, the video should play but without any sound?
Can this be done?
Cheers
Adam

I am having a similar problem....didn't recognize it until today.... I wasn't getting any sound out of the right side of my headphones....Unplugged them....wasn't getting anything out of the right front speaker....Hmmmswap them around...speaker is good... Take apart the base unit for the Inspire 5400....nope, that's looks ok....plug it all back in....check wiring...plug everything in correctly....test speakers with Creatives software....all sound is now coming out of the front speakers....nothing out of the rear.... I can't figure it out....it is getting late...any suggestions would be greatly appreciated!

How do you disable the sound when sending tweets from "Click to Tweet" in the Notification Center?

So, ever since the "Click to Tweet" button appeared, anytime you post to Twitter with it, your heard a bird whistling sound. This was cute at first, but has become increasingly annoying (and probably not just to me, but also to my co-workers). Sure, I could mute my speakers prior to sending, but a.) I usually forget, and b.) I shouldn't have to.
In a similar manner, the "Click to Post" to Facebook button makes the "woosh" noise that Mail.app makes when sending an email.
These sounds should be able to be disabled or muted. The only solution I've found online so far is to move/rename/change permissions of the actual sound file itself on the file system. That seems way to extreme.
In summary: am I just missing some obvious setting, or is there really no way to mute/disable these sounds?

The best way to do this is to leave all files unchanged, but render the file containing that horrendous bird noise unreadable to the system. Open a terminal window, and paste this command:
sudo chmod 000 /System/Library/Frameworks/Social.framework/XPCServices/com.apple.twitter.xpc/C ontents/Resources/TwitterSent.caf
That's it. Your Tweets should hereinafter be silent unless you change TwitterSent.caf's permissions again.

Disabling the sound card in Vi

I'm trying to run integrated sound out of my motherboard to get around an issue with KOTOR II crashing when the sound card is enabled in Vista. I can disable the sound card in the device manager, but that just causes a complete lack of audio everywhere.
How do I get my motherboard to start producing sound after I've disabled the sound card?

This one provides both stereo both in and out
http://www.fullcompass.com/product/366255.html?utm_source=googleps&utm_medium=sh opping&utm_campaign=googleps&gclid=Cj0KEQiA6ounBRCq0LKBjKGgysEBEiQAZmpvA3kM-TFIv d5rACDsjKiAPBTEhgZgS7KrJtMqmMMaK9UaAs-j8P8HAQ

Disabled key

i need to fix my laptop due to a bad hard drive. But in order to install a new OS I need the password. My disable key is 57890962

Hi,
Please try:
48798364
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[Solved] Disabled key for LXDE

Hi again,
I'm unhappy that I have to claim for your help again but I'm encountering some trouble installing LXDE. The problem ist discribed precisely in the internet and there are workarounds given to get things straighten out but I think, there might be some drawbacks.
One place the error is discribed is in the bugsection of this page. The bug is marked as closed over there giving the reason that it's fixed. Nevertheless I keep encountering that error. As an additional comment about closing "archlinux-keyring 20130525-2" is given. I checked that package. It is already installed on my machine.
As aforementiones ther are some workarounds. One is given by flexiondotorg who suggest to just reenable the relevant key. That might work for sure but I guess there is a reason for the key being disabled. Maybe there are some pagages, maybe malicious ones, signed using that key without authorization. That it would be advisable not to reenable that key, wouldn't it?
Now I'm left alone with two questions I'm not able to find a satisfying answer for myself. First of all I'm wondering, why the bug report is closed and marked as fixed, while I continue to get exactly the same error. Is it going to be fixed anyway or it's just me who doesn't see the point how it is fixed?
The second arising question is whether there is a way to get the LXDE package anyway making sure that the package is not manipulated using a stolen key from Mr. Wallace.
Last edited by disjunkt (2013-07-04 05:07:45)

Ok, i did my homework and got some enlightments. You can disable, revoke and delete a key and their components respectively. But each one of these mean a (slightly) different thing obviously.
If you have to void a key, for whatever reason, you'll have to delete or rather revoke the key. However there are some advantages to revoking the key. I'm not going to carry that out in detail, but you can do some reading about that stuff in The GNU Privacy Handbook. By the way, the "redundant selfsigning" ist not a redundant selfsigning, but a rovoking of the uid. That's also explained in the Privacy Handbook.
Disabling a key on the other hand is not described in the Privacy Handbook but there is a brief description in the GnuPG (2.0) manual stating that you can "Disable or enable an entire key. A disabled key can not normally be used for encryption." If i understand alright, that will be just a local setting. If you disable a key, won't be used for encryption on your machine, but it would not effect others. Disabling and enabling a key or a key component doesn't change anything with that key. A revoked key will stay revoked.
Finally I'm not 100% sure, but I think re-enabling a key shouldn't affect any security concerns. Please correct me, if I'm misled. Or if you can confirm that for sure, you'll be very welcome to do that as well. Besides that I can't think about a reason why you disable a key. Maybe someone can also point me in a direction here.

How to enter bios, disable onboard sound, and install a sound card

How do I enter bios, disable onboard sound, and install a sound card?

Hi,
You may also have to disable, security for the PCIE x1 slot.
Windows 8.1 - Accessing the UEFI (BIOS) Setup
Regrads

How to reset?"Enter Administrator Password" on Compaq CQ62. System disabled key 75858185

Hello everyone,
I have a Compaq CQ62.
When I've turned it on, it comes up with the bios screen message "Enter Administrator or Power on Password".
I tried a few incorrect attempts and after the third attempt, a message "System disabled - Key 75858185" has appeared.
Can anyone please help please?

Hello everyone,
I have a Compaq CQ62.
When I turn it on, it comes up with the bios screen message "Enter Administrator or Power on Password".
I tried a few incorrect attempts and after the third attempt, a message "System disabled - Key 75858185" has appeared.
Can anyone help please?

I need to disable key events - J2ME

Is there anyway, in J2ME, to disable key events while processing a current key? I want to avoid queing up of key events and then re-enable key events when I am done handling the current key.
public void keyPressed(int keyCode) {
switch (keyCode) {
case -50:
// I want to disable key events here
// process this key
// re-enable key events
break;
default:
break;

I had tried using a boolean to skip avoid the key as you suggested. That does not work. It seems as if the keys are only being processed in a serial manner. By that I mean the keyPressed method is not receiving the second and third keys while I am processing the first. So when I am done processing the first key I set isOkayToProcess=true and then the second key comes in.

Disable key event

Is there a way to disable keys from being pressed?

With current technology, you can't prevent the user from pressing keys, but you can ignore any key presses that they make. Here's a handler that will make your movie ignore everything except vowels:
on startMovie()
the keyDownScript = \
"if "&QUOTE&"aeiou"&QUOTE&" contains the key then"&RETURN&\
" -- Let the key press be treated"&RETURN&\
" else"&RETURN&\
" stopEvent"&RETURN&\
" end if"
end
If the #keydown event is stopped then no sprite or member will receive an indication that a character has been typed.
You might like to look at the keydown event handler and build your own custom solution.

My key sound and game sound is not working I did everything

My key sounds game sound not working YouTube music working fine pls help

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

My key sounds and lock sounds no longer working, have tried everything!! Please help?

I have only had my iphone 4s for two months. The key sounds and lock sounds not working, happened after plugging it in for charging. It's all switched on in settings. Now it only vibrates when a message comes, or new mail etc, even though I have tones set it doesn't play them. I have done a full restore and hasn't worked either. I have also noticed the amount of power has disspeared (number) now too. What should I do? Thank you!

Thanks, power icon all sorted. But I still can't get the sounds back. I tried that reset at the beginning and it hasn't worked. Tried it again, still the same. What should I try next? Remember I've already tried a system restore. Nothing is working! Don't know what to do next?

Disable key sounds

Similar Messages

Maybe you are looking for