Disable Lync 2013 Client and Exchange 2010 Integration

Is it possible to disable integration to Exchange 2010 from a Lync 2013 client?  I found a key that works for Lync 2010 by setting HKLM\Software\Policies\Microsoft\Communicator\PersonalContactStoreOverride to 1.  That does not seem to do anything
to a Lync 2013 client, nor have I been able to find a solution to disable it via Registry/GPO.  Some things I have found seem to indicate that key does is not used by a Lync 2013 client but that is somewhat speculation.  Can someone tell me if there
is a key to disable this connectivity and disable it like what the key above does for 2010?  Thank you!

Create a new-csclientpolicyentry -name "PersonalContactStoreOverride" -value "1" and assign it to a Client Policy
see Raffaele's post at: http://social.technet.microsoft.com/Forums/lync/en-US/0762e036-1f9f-43a6-bb81-686864260c9d/how-to-install-the-lync-client-through-sms-with-personal-information-manager-set-to-none?forum=ocsplanningdeployment
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Similar Messages

  • Lync 2013 Client and Outlook 2010

    Hi, I installed Lync 2013 (FE and Edge server). I am able to talk but still I need to buy suitable certificate in order to access from outside. Rest of the network is as follow. SBS 2011 with exchange 2010, clients have Office 2010.
    Problems that I noticed are:
    - If in Calelendar there is appointment, Lync client shows still available
    - Lync meeting button doesn't react when pressed.
    Is Lync 2013 client backward compatible with older office/Exchange or not ?
     

    For presence show doesn't integrate with outlook, Verify that the
    Lync Meeting Add-in for Microsoft Office is installed and enabled in Microsoft Outlook.
    For lync 2013 client compatible with office and Exchange, you can refer below link
    http://technet.microsoft.com/en-us/library/gg412817.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • Lync 2013 standard deployment: Exchange 2010 Sharepoint 2010 and outlook 2007 collaboration

    HI
    I have Exchange 2010 and sharepoint 2010 with all our user using outlook 2007. what options do I have for collaborations between these systems if I was to install Lync 2013. I have seen posts that mention that you cannot use outlook 2007 and lync 2013 and
    that you would be better off installing the lync 2010 client?
    1. would we be covered from a licensing point of view if we had bought lync 2013 cals but install the lync 2010 software on desktops?
    2. what Cals do we require for presence to be available in SharePoint we currently have standard sharepoint cals?
    3. what new features will we loose if we install 2010 lync software.
    4. if our mobile users use the 2013 lync software will these be able to communicate with the 2010 users?
    thanks
    J

    Hi,
    If you use Lync 2013 client with Outlook, multiple functions will not be achieved, such as: customize Outlook meeting invitations (add logo, help URL, disclaimer, footer text), in Outlook, configure meeting option to mute attendee audio and video by default,
    presence status in the Microsoft Outlook To and Cc fields, and so on. As Lync 2013 is the part of Office 2013, the best choice is using Outlook 2013.
    More details:
    https://technet.microsoft.com/en-us/library/gg412817.aspx
    For the CAL requirement, you can refer to following link:
    Lync Licensing Guide
    You can refer to the link below of “What’s new for clients in Lync Server 2013” to understand the new features for Lync 2013:
    https://technet.microsoft.com/en-us/library/jj204933.aspx
    If you use Lync 2013 mobile clients, you can communicate with 2010 users with no possible.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • Lync 2013 clients behind TMG 2010

    Hi
    My escenario is as follow
    Lync Client 2013 --> TMG 2010 --> ISP Router (without fillter ports)
    I have a problema with this escenario because TMG drop me the voice calls and sudendly drop me the connection with the server.In TMG i created the following rullo
    From internal to external, and URL Set (*.microsoftonline.com,
    *.microsoftonline-p.com , *.onmicrosoft.com, sharepoint.com, *.outlook.com )
    Protocols: http, htpps, RTP, SIP, Sip Server, Sips, Sips Server,
    50040-50059 TCP Outbound
    50000-50019 UDP Send Receive
    3478 UDP Send Receive
    59999 UDP Send Receive
    50020-50039 UDP Send Receive
    So what is the problema with this TMG 2010 (with all updates, SPs and rollouts)
    Thanks

    Hi,
    The following blog might help.
    http://www.jaapwesselius.com/2012/12/21/publish-lync-2013-services-in-tmg-2010/
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Lync 2013 client and mobile

    Dear All Hello,
    i am having one very strange issue, I setup lync 2013 certficate all thing okay. We can login into lync 2013 client to lync 2013 server without any issue using PC but same login if i try to login into mobile having anrorid or windows phone it fais and its
    pop up message we cannot sign you in please check your account info and try again. 
    We just created user using Enterprise voice optin, checked mobility is enabled. External url is configured. 
    Any body can refer if something is missing. I havenot updated any cu for lync 2013. 
    If i run Test-CsUcwaConference or Test-CsMcxP2PIM for mobiliity i get following error. I havneot done any update nor any tool as most of article are refering for lync 2010. 
     No response received for Web-Ticket service.
     Inner Exception:The content type text/html; charset=utf
     the response message does not match the content type of
     binding (text/xml; charset=utf-8). If using a custom en
     be sure that the IsContentTypeSupported method is imple
     properly. The first 1024 bytes of the response were:
     '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//E
     "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
     <html xmlns="http://www.w3.org/1999/xhtml">
     <head>
     <title>IIS 8.5 Detailed Error - 500.0 - Internal Server
     Error</title>
     <style type="text/css">
     <!--
     body{margin:0;font-size:.7em;font-family:Verdana,Arial,
     a,sans-serif;}
     code{margin:0;color:#006600;font-size:1.1em;font-weight
     .config_source code{font-size:.8em;color:#000000;}
     pre{margin:0;font-size:1.4em;word-wrap:break-word;}
     ul,ol{margin:10px 0 10px 5px;}
     ul.first,ol.first{margin-top:5px;}
     fieldset{padding:0 15px 10px 15px;word-break:break-all;
     .summary-container
     fieldset{padding-bottom:5px;margin-top:4px;}
     legend.no-expand-all{padding:2px 15px 4px 10px;margin:0
     -12px;}
     legend{color:#333333;;margin:4px 0 8px -12px;_margin-to
     font-weight:bold;font-size:1em;}
     a:link,a:visited{color:#007EFF;font-weight:bold;}
     a:hover{text-decoration:none;}
     h1{font-size:2.4em;margin:0;color:#FFF;}
     h2{font-size:1.7em;margin:0;'.
     Inner Exception:The remote server returned an error: (5
     Internal Server Error.

    Let ensure the mobile client can connect fine
    http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
    Also we can use the Lync connection analyzer tool for Mobile scenario and test
    http://blogs.technet.com/b/nexthop/archive/2013/02/08/the-new-lync-connectivity-analyzer.aspx
    Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph
    Great follow up thanks!.
    Seems i am near to solution. 
    I used web site url https://testconnectivity.microsoft.com it pass all test,
    When i use to test using tool it goes to my local fqdn and says unable to resolve. 
    An error occurred while sending the request.
    The remote name could not be resolved: 'lync1.hosting.mydomain.local'
    When i open this url  lyncdiscover_contoso.com it give both internal and extral url. 
    Which is this {"_links":{"self":{"href":"https://lync1.hosting.mydomain.local/Autodiscover/AutodiscoverService.svc/root?originalDomain=haxxess.com"},"user":{"href":"https://lync01.externaldomain.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=external.com"},"xframe":{"href":"https://lync01.externaldomain.com/Autodiscover/XFrame/XFrame.html"}}}
    I am using lync 2013, with no tmg for publishing, internal web servie name is empty overrite and extranal is lync01.externaldomain.com 
    So as article says if i see internal url If the internal web services URL is identified, the web publishing rule is incorrect and is bridging the connection to port 443
    instead of port 4443 for the Lync external web services.
    Where do i have to change this in topology under web service. can you please guide this last phase. 

  • Deploying Lync 2013 client and SCCM Detection method

    So I am deploying the stand alone Lync 2013 client via SCCM 2012 R2, I have used OCT to create a .MSP, and I am trying to import it into SCCM.  However, I am curious as to what others are using for the Detection method?  Normally I would just
    use the MSI code, but since there is no single MSI, that is not possible with this particular version?  I'm not sure what the best method would be, Option 1 is to find a registry key that is installed by Lync, or Option 2, use a file, maybe Lync.exe under
    the Program Files?

    From the testing I've done Lync creates this reg location...
    HKLM>Software>Microsoft>Office>15.0>Lync
    Try using one of the keys in there, or you could use the file version but not sure if this would change with updates.

  • No contacts in Lync 2013 client and not appearing in others contact lists

    Hello all,
    I hope someone might be able to help out with this problem, I've been at it for weeks with no luck. I've migrated from Lync 2010 to 2013. All users have been successfully migrated and everything is working for them, except for one user (which i me unfortunately).
    When I sign into Lync from any device (desktop, laptop, windows phone, iphone) I do not see any contacts in my organization, but I can find any of the contacts if i search for them. I also don't appear in anyone else's contact list, but they can find me if
    they search. 
    I have tried disabling and removing my account from Lync server, uninstalling and reinstalling the Lync client on my machine, cleaning up all the Lync folders and registry keys on my machine. Nothing seems to get me any closer to getting this fixed. 
    I did find a discussion
    here that is exactly the problem I'm having, but I don'e see a solution there either.
    Has anyone else seen this before? Any suggestions or ideas would be very appreciated.
    Thanks in advance!

    I am afraid your Lync account lose the user data contact list when you move user from Lync Server 2010 to Lync Server 2013.
    Please try to move the user back to Lync server 2010 to check if the contact list is stored.
    You can use the tool DBIMPEXP.exe to back up specific user’ data from Lync Server 2010 and import the data to Lync Server 2013 with the command Import-CSUserData which is introduced in Lync Server 2013.
    Before you import the data, you need to use the command Convert-CSUserData to convert exported user data to the data format used by Microsoft Lync Server 2013.
    For the details, please check
    http://www.shudnow.net/2012/10/09/dbimpexp-exe-functionality-integrated-into-lync-2013-preview-management-shell/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Lisa Zheng
    TechNet Community Support

  • Lync 2013 Client Can't Expand Distro Group (externally)

    I have a Lync 2010 FE and Edge server with the web servcies being published via UAG 2010.  I am testing the Lync 2013 client and the DG (distro group) expansion is failing externally.  I get the error in the client "Cannot use the distribution
    group service becasue the service address is incorrect, although the service is available. Contact your...."  Distribution group expansion works fine externally with the 2010 client.  The web servcie address for DG Extneral does work via the web
    browser as expected.  Any ideas? 
    Thanks

    Did you migrate from Lync server 2010 to Lync server 2013?
    If so, please check you have create DNS record for the Lync server 2013 external web service point to the NATed public IP address of Lync Front end server.
    Check whether the internal web service for distributed group works.
    Check whether ABS for Lync 2013 works.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Lync 2013 client still show titles that is turned off on Lync 2010 server

    Hi All
    I have another unique issue it seems.
    Environment - Lync Server 2010 on CU5. Lync 2010 and Lync 2013 client.
    The client has used absconfig and removed the titles as the don't want that to be displayed.
    The lync 2010 clients does not show the titles - so that is working.
    Lync 2013 from external access the titles does not show - so that is working.
    Internally on the LAN the Job Titles shows on the Lync 2013 client - so not working.
    What I've tried so far :
    Disabled exchange contact sync on a client policy
    Used webdownload only for address book.
    Using registry to force download of address book.
    Deleted the Lync folder on the client computer to make sure when it downloads the .idx and .db file that it is the latest version.
    None of the above remediations seems to have any impact on the lync 2013 client.
    I have tried to replicate this in my lab (without an exchange server) and the the lycn 2010 and 2013 clients behave as they should be not displaying the job titles.
    Having anyone come across this before?
    I will be patching the lync 2010 server to the latest CU update, but I think the issue is somewhere else.
    Any suggestions will be appreciated.
    Regards
    Danie

    Hi Danie,
    I suggest you could install the latest CU update first, because the CU update would fix many problems.
    In addition, shall we test Lync 2013 on a fresh computer without Outlook?(You could test this using Lync 2013 Basic).
    Best regards,
    Eric

  • Lync 2013 IM (OWA) Exchange integration - Only works internally

    Hi Everyone
    I have followed this tutorial which details how to integrate Lync with Exchange OWA:
    http://social.technet.microsoft.com/wiki/contents/articles/13168.integrating-exchange-2013-owa-and-lync-server-2013.aspx#Acessando_o_OWA
    Everything works perfectly internally, however when I browse to the external OWA website I cannot sign in with IM(inside OWA). My lync client works correctly over the internet as I can make video calls to other Lync users on my domain(application on an external
    PC)
    Can anyone point me in the right direction? It must be something simple as it works internally. OWA works correctly externally. I can login, send/receive emails etc. I just can't get the IM to sign in
    (Edit):
    Current setup:
    1x Lync 2013 server which is accessible from the internet via an ARR IIS server
    1x Edge server which faces the internet
    1x Exchange 2013 server which is accessible from the internet via an ARR IIS server
    Any help would be greatly appreciated

    Hi,
    Did you get any error message when integrating Lync server and OWA?
    Please update to the latest version for Lync server and Exchange and test again.
    Please make sure that the certificate you use on the MBX server is trusted by the Lync 2013 server and vice versa. Typically this means using certificates from a mutually trusted CA, perhaps the enterprise CA
    You can troubleshooting with the help of the link below of “Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013”:
    http://blogs.technet.com/b/jenstr/archive/2012/10/31/troubleshooting-tips-for-exchange-2013-owa-im-integration-to-lync-2013.aspx
    If issue persists, you can try to use SIPStack tracing to collect reports:
    http://www.microsoft.com/en-us/download/details.aspx?id=35453
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 Client pops up automatically while typing in Word , Excel in Windows 7 after upgrade from Lync 2010 client

    Hello All,
    Facing very much weird issue for only 4 users in my organization. This 4 users are migrated to Lync 2013 pool from Lync 2010 pool with Lync 2010 client migrated to Lync 2013 client.
    Now whenever this users are typing in (apps like word, excel) automatically pops up Lync 2013 client which is annoying.
    All my users are Windows 7 with latest updates & updates Lync 2013 with latest updates installed.
    Any help really appreciated.
    Regards
    Anand S
    Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

    Hi 
    The solution is to do a ‘repair’ install of Office 2013.  This will reregister the needed components and the popups will stop. 
    A repair install can be done from ‘Programs and Features’, highlight Office 2013 and click ‘Change’.  When the install wizard appears, choose the ‘repair’ option.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Cannot share desktop - Lync 2013 server and Windows 8 (64-bit) client

    Currently my new Lync server cannot share a desktop through a Lync 2013 client installed on a Windows 8 workstation. The client is patched up with the latest MS patches (much beyond the patch issues noted about a year ago, the patches in question do not
    even show up as installed).
    I get the same "An error occurred during the screen presentation" message. I do have a NVIDIA video cards on the workstations, but they too are patched up. The same systems have no issues sharing desktop screens in the Lync 2013 client on Windows
    8 systems when they are connected to a Lync 2010 server.
    I have no idea where to go from here. Any suggestions or help is greatly appreciated.

    Did this issue happen to other Lync 2013 client?
    As you mentioned that you can used the same Lync 2013 to sharing desktop screen when it connects Lync Server 2010 while you couldn’t share desktop screen when it connects to Lync Server 2013,
    I think it is related with Lync Server.
    Please check if you can find any errors on Lync Front End Server.
    Check all Lync server services are all started.
    Lisa Zheng
    TechNet Community Support

  • Exchange 2013 and Exchange 2010 coexistense

    We have a and exchange 2010 organization with SP3 on most servers except for one 2010 CAS server that still requires SP1 for the purpose of legacy application compatibility. Can we introduce exchange 2013 in the org or will the setup detect
    that there is an exchange 2010 server still with SP1 and fails to continue?

    Hi,
    For Exchange 2013 coexistence with Exchange 2010, the mininum version of Exchange server is Exchange 2010 SP3 on all Exchange 2010 servers in the organization. For more information about it, please refer to the Coexistence of Exchange 2013 and earlier versions
    of Exchange server part in the article below:
    http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
    Personal suggestion, please upgrade your legacy application to the latest version which is supported with Exchange 2010 SP3 or higher Exchange version.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Schedule a meeting via Lync 2013 client

    Hi All,
    quick run down of my set up,
    Exchange 2013 SP1 (no UM) and new installation of Lync 2013 FE with Feb 2015 cumulative updates (no Ent voice )
    haven't integrated Exchange with Lync.
    my problem is when i try to schedule a meeting with a colleague via Lync 2013 client it says "no free/busy information could be retrieved and if i let it stay open for 5 min it will come up or unless I unselect and reselect the user the information
    comes up.
    any idea what's causing thus and how to fix it?
    Thanks in advance

    Not sure of a fix, but Michael LaMontange posted a workaround for it:
    http://realtimeuc.com/2013/04/no-free-busy-when-scheduling-meeting-from-lync/
    Some other thoughts here:
    http://www.doitfixit.com/index.php?option=com_content&view=article&id=82:no-freebusy-information&catid=34:exchange-2010&Itemid=53
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

    Hi Team,
    Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
    Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
    Can somebody confirm this as I am not 100% sure about it.
    Appreciate your help. Thanks
    Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

    Hi,
    The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
    Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
    The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
    A URL configured by the user
    More details:
    http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for