Disable parallel slaves from multiple instances in RAC.

Hi All,
By default while using parallel execution in RAC slaves are spead accross multiple instances.
Why can I ensure slaves are allocated to only on that node where query is executed.
Basically to avoid interconnect trafic.
Thanks,
Raja.

It would cripple RAC, wouldn't it. It would make any query on any gv$ view impossible.
Even if it was possible, it would make your database unsupported.
Apart from that, it doesn't make sense too. You want to distribute resources, and to run on the server which is least loaded.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Adjust parameters from single instance to RAC

Hi
I am carrying out a migration from single instance to RAC. I know there are a list of parameters that We have to adjust to keep the same or better performance moving from single instance to RAC. Can you post any link or something like that, that help to adjust the parameters ?
Thanks

user2931261 wrote:
Thanks
All is runing fine and the instaces are started. I set major of parameters of single instance but now I am getting a message that some of the parameters I set are DEPRECATED. How can I know what parameters are deprecated ?
ThanksORA-32004 obsolete and/or deprecated parameter(s) specified
Cause
One or more obsolete and/or parameters were specified in the SPFILE or the PFILE on the server side.
Action
See alert log for a list of parameters that are obsolete. or deprecated. Remove them from the SPFILE or the server side PFILE.
obsolete and/or deprecated parameter(s) in initDB.ora file. To find out which you could from SQL*PLUS, issue the following statement, to find the sinner.
SQL> select name, isspecified from v$obsolete_parameter where isspecified='TRUE';
refer:-http://oracleinstance.blogspot.com/2009/12/04-obsolete-andor-deprecated-parameters.html

Migrate from single instance to RAC manually

Hi,
I have a 10g database running in single instance.I have installed grid 11.2.0.2 in two nodes including the node where current instance is running,I have installed 10g again in a seperate mount point in both the nodes .It has the same patches as single instance 10g home.Now how to migrate from single instance to RAC manually.
Thanks,
Sekar

-restore this database into 11g ASM if its not already on ASM.
-upgrade this database to 11g from 10g on single instance.
-Now Converting Single Instance on a Cluster to Oracle RAC ,here you have different option to perform this once its 11g database after upgrade.
using rconfig
using dbca or manually.
see detail here
http://docs.oracle.com/cd/E11882_01/install.112/e24660/cvrt2rac.htm#autoId9

Log messages from multiple instances in single file.

Hi!
I have a requirement that i need to log messages from muliple instances of the same object in a file. The new file will be created every day. Likewise, multiple objects might have various instances each.
One class
->multiple instances
-> log message stored in single file.
Note :
I am using the Message driven bean. I need to log from the bean class. JDK 1.3
If u could help me out that would be great.

As long as they are all from the same OS program (a single Java VM), that's OK - you can use Log4j, and use a rotating file logger.
If you point two different virtual machine processes at the same file, one may have it open when the other is trying to rotate it, and your rotation may fail (at best) and/or you may lose the old log (the worst case).
If you need to collect log messages from multiple processes (or even multiple machines), use a syslog-based logger (Log4j has a SyslogAppender) or use Log4j's SocketAppender to write to a log4j-builtin log listener (SocketNode).

Parallel Export from multiple Essbase cubes

Hi,
Is it possible to take parallel Export from Essbase where the source data resides in multiple cubes? I am looking at using source data(lev 0) from multiple cubes and load into simultaneous txt files.
Please provide links to any documents that may help.
Regards,
Lijoy

IF I read your question correctly, No. You can't merge multiple cube sources into one set of export files. The files are open for output and can't be shared. If you tried to do the one after the other into the same file, it would overwrite.
You could get creative and after the exports are done concatinate the files together to get a single file. I'm couroius, why do you need all the data in a single file. Even if oyu are loading to other systems you ssould be able to load multiple files. If not, then the concatination through a windows batch script or unix shell script would give you what you want.

How to convert from single instance to RAC?

Hi, I have one environment it is version is 10.2.0.4 in linux SUSE.
I decided to move this environment to 10.2.0.4 Real applicaiton cluster has two nodes in linux red-hat.
Firstly,
I install 10.2.0.1 rac on two new machine in linux red hat.
Then I upgrade my rac to 10.2.0.4 from 10.2.0.
Now I want to move the single instance to RAC,
Is there an anathoer way that different from export , import?

Besides the obvious Export-Import which do not want to consider (although it would be the neatest method !), look the 4th conversion scenario under paragraph D.3.2 "Single-Instance to RAC Conversion Scenarios" at
http://download.oracle.com/docs/cd/B19306_01/install.102/b14203/cvrt2rac.htm#BABFCAHF
The 4th conversion scenario is "Converting a single-instance Oracle Database 10g Release 2 (10.2) to an 10g Release 2 (10.2) RAC database, running out of a different Oracle home, and where the host where the single-instance database is running is not one of the nodes of the RAC database".
Reference section D of the "Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide 10g Release 2 (10.2) for Linux"
http://download.oracle.com/docs/cd/B19306_01/install.102/b14203/toc.htm

How can I get file from multiple instance using file adapter

Hi.
Our system(PI7.1) have three application instances running with each physical servers.
We use sender file adapter.
The file data is sent to one of the servers.
Now, how can I get the file using three file adater?
Should I put the file "sapmnt(\usr\sap)" .
Or are there another solution?
regards,

Hi Ashutosh
You will have to use sapcar.zip which contains the utility Sapcar.exe utility for unzipping the files from SAP compressed files. (*.car file)
Regards
Gaurav
PS: Reward points if solved

Retrieving user created variables from multiple instances using PAPI-WS

Hi,
I'm using PAPI-WS to retrieve a list of instances from Oracle BPM 10.3.1.0.0 using ProcessGetInstance. These are modeled as external tasks. ProcessGetInstance returns an InstanceInfoBean which has no place for user defined variables that were set when the instances were started.
The only way to get user defined variables seems to be to iterate through the entire list and send an InstanceGetVariable request for each one. InstanceGetVariable does not seem allow more than one instance id to be specified in a call from my testing. This is very inefficient since we could easily have hundreds of instances that we're trying to display. Is there some way to get the list of instances to include the user defined variables, or to get the user defined variables for more than one instance in a single call?
Thanks,
Steve

I can't reproduce the problem. This is what I see:C:\temp>javac -cp . Ttest.java
C:\temp>java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Client VM (build 1.6.0-b105, mixed mode, sharing)
C:\temp>java -cp . Ttest
1
3
3

Importing data from multiple instances of form into spreadsheet

I am trying to set up a time-tracking system using an interactive PDF form. I have designed the form, and it works great. All users will enter their time into the form and email me the form. So I will have multiple XML file to import into Excel, where I can compile and analyze the data.
Is there a way to automate the importing of these multiple XML files into Excel? From what I've figured out so far, it seems that I will have to manually import each XML file into Excel, and this seems too labor-intensive. I'm sure there's a better way.
Any hints?

Give Acrobat a try. Put all your XML data into a single location. In Acrobat, choose File | Form Data | Create Spreadsheet from Data Files. Once the file has been compiled, use the "View" option to see the data in Excel.
Carl Young
www.pdftrain.com

Selecting instance from multiple instances

AC2.0
I have several instances of a movieclip, named p1 through
p20, inside another movie clip. The instances get dragged around
the screen when a user clicks on one: (see code)
I would like to change the variable NOMEN as soon as someone
selects which instance to drag around. The problem is that I can't
determine which instance a user starts to drag. The instances are
literally jumbled together in a pile. A user comes along, and
decides to "Drag" one instance away from the pile. The user will
click-Down on his mouse and drag. So what I would like to do is, on
that downward-click to change the variable "Nomen", so that the
"Drag" can begin. Is that possible?

I've ditched the above idea and now I'm just trying to tile a
new mc in a nice box pattern (row/columns), only the function i'm
using seems to ignore the boundaries of the stage height and width,
and actually begins the tiling mid-stage. I was wondering if anyone
could tell why?

How does a RAC DB 'spread' from single instance to multiple instances ?

GI/RDBMS Version: 11.2.0.3
OS: Oracle Linux 6.3
Filesystem : ASM
When a RAC database is created using dbca , Manually , or RMAN restore, the DB is created in the Node1 first with cluster_Database=FALSE .
Then you run the following commands (for 3-node RAC) from Node1
srvctl add database -d lmnprod -o $ORACLE_HOME -p +LMNPROD_DATA01/lmnprod/spfilelmnprod.ora
srvctl add instance -d lmnprod -i lmnprod1 -n hwcarser290
srvctl add instance -d lmnprod -i lmnprod2 -n hwcarser291
srvctl add instance -d lmnprod -i lmnprod3 -n hwcarser292
Once the DB is created,mounted and opened in Node1 and the above commands are executed , you set cluster_Database=TRUE and startup the Instance2 and Instance 3 in Node2 and Node3.
I just want to know how does Node2 and Node3 becomes aware of the DB and joins the DB cluster ? What happens internally ?

Generally speaking, registering in OCR is not required for database to be a cluster database.
Migration from single-instance database to cluster consists of creating redo logs and undo tablespace for new instance and enabling this instance (thread). If database is policy-managed, this is done automatically for new node.

How do I prevent a user from opening multiple instances on the same computer?

On the site oldnavyweekly.com there is a .swf that prevents users from opening multiple instances of the site at the same time on the same computer. If you open the site, and try to open it a second time in another window, it won't load. You can't open the site again until the first window is closed. How did they implement this?
From my analysis it is NOT:
1. Cookies - The block still takes place if you try opening it in IE and also try opening it in Firefox simultaneously.
2. Flash Cookies - The block still takes place if I disable flash cookies.
3. IP Based Block - You are not blocked if you open the site on two separate computers with the same outbound IP address. From my analysis, their server does not assist in the block at all.
It seems as if their .swf is creating some kind of global system-wide object that can be detected in other instances of the application on the same machine. How did they implement this?
Thanks!

you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

Running multiple instances from same oracle home

Hi Gurus,
I am preparing for OCA 11g examination. I had a question about running multiple instances from same oracle home. While reading the book I came across a statement about database control which says "If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".
Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).
I am not able to understand how exactly can you have multiple database instances in a single oracle home. I have installed Oracle 11g on my computer whose oracle home is +"D:\oracle\product\10.2.0\db_1"+; now this directory houses all the binaries (executables and folders like admin,bin, etc) for the oracle instance that I have installed (the instance name is ocp1). Now if I am to install or create another Oracle Instance (say ocp2) in the same home, wont there be a conflict of binaries of the two instances in the same home ?
Basically,it makes sense if db_1 folder is further split into multiple folders, one for each instance (for example, one for ocp1 & one for ocp2); each of these folders will then contain the binary files, libraries,etc for its own instance; but, this is not the case, here db_1 houses all the binaries directly under it ...
The other question which stems from the statement I mentioned above is that if having multiple instances running from same oracle home accessing the same physical database, can this arrangement be called RAC at all; or does RAC dictate that you cannot have multiple instances that are accessing the same database have to be installed on physically separate machines and so you cannot have two RAC instances (accessing same physical database) installed on the same computer ??
I hope my questions are not too much confusing ... !!
Cheers,
Sudripta

Hello,
"If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".This is true, and also means each instance will have its separate database (i.e. dbf files etc.) & separate DB Control. Usually in this case you create several instances on the same node.
Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).You are correct about RAC where several instances (usually running on separate nodes) access the RAC.
More info:
1 Oracle Home - 1 Database - 1 SID is possible.
1 Oracle Home - Many Databases - Many SID is possible.
1 Oracle HOme - 1 Database - Multiple SID is possible and this is called RAC.

Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation. Any suggestions?

Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?

Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
Problem description:
Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
EtreCheck version: 2.1.8 (121)
Report generated 6 February 2015 08:40:29 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 75
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
        Color LCD 1440 x 900
    NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:13:14
Disk Information: ℹ️
    Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    BUFFALO HD-PVU2 500.11 GB
        EFI (disk2s1) <not mounted> : 210 MB
        Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
Launch Agents: ℹ️
    [loaded]    com.hp.help.tocgenerator.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    Skype    UNKNOWN (missing value)
    Safari    Application (/Applications/Safari.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    ConnectService    Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 4.0.60129.0 [Click for support]
    iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 499.76 GB
        Total number of backups: 184
        Oldest backup: 2010-12-10 15:37:39 +0000
        Last backup: 2015-02-06 02:49:24 +0000
        Size of backup disk: Too small
            Backup size 499.76 GB < (Disk used 184.16 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         1%    ConnectService
         1%    Skype
         0%    systemstatsd
         0%    launchd
Top Processes by Memory: ℹ️
    193 MB    Skype
    168 MB    mds_stores
    132 MB    com.apple.WebKit.WebContent
    107 MB    Mail
    99 MB    ocspd
Virtual Memory Information: ℹ️
    889 MB    Free RAM
    1.99 GB    Active RAM
    455 MB    Inactive RAM
    825 MB    Wired RAM
    1.11 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 6, 2015, 08:27:32 AM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
    Feb 6, 2015, 08:25:19 AM    Self test - passed
    Feb 5, 2015, 04:37:08 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
    Feb 5, 2015, 10:01:02 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
    Feb 5, 2015, 12:03:59 AM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
    Feb 4, 2015, 11:58:58 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
    Feb 4, 2015, 11:54:35 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
    Feb 4, 2015, 11:49:03 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
    Feb 4, 2015, 09:40:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
    Feb 4, 2015, 09:38:12 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
    Feb 4, 2015, 09:27:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
    Feb 4, 2015, 09:25:25 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
    Feb 4, 2015, 09:20:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
    Feb 4, 2015, 09:18:10 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
    Feb 4, 2015, 09:12:54 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
    Feb 4, 2015, 08:40:48 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
    Feb 4, 2015, 08:22:04 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
    Feb 4, 2015, 12:11:35 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
    Feb 3, 2015, 09:44:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
    Feb 3, 2015, 05:40:21 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
    Feb 3, 2015, 09:05:45 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
    Jan 28, 2015, 06:10:42 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
    Jan 21, 2015, 10:51:25 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
    Jan 20, 2015, 11:12:47 AM    /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
    Jan 18, 2015, 09:57:31 AM    /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
Any further assistance will be appreciated

How to reference multiple instances of the same Java object from PL/SQL?

Dear all,
I'm experimenting with calling Java from PL/SQL.
My simple attempts work, which is calling public static [java] methods through PL/SQL wrappers from SQL (and PL/SQL). (See my example code below).
However it is the limitation of the public static methods that puzzels me.
I would like to do the following:
- from PL/SQL (in essence it needs to become a forms app) create one or more objects in the java realm
- from PL/SQL alter properties of a java object
- from PL/SQL call methods on a java object
However I fail to see how I can create multiple instances of an object and reference one particular object in the java realm through public static methods.
My current solution is the singleton pattern: of said java object I have only 1 copy, so I do not need to know a reference to it.
I can just assume that there will only ever be 1 of said object.
But I should be able to make more then 1 instance of an object.
To make it more specific:
- suppose I have the object car in the java realm
- from PL/SQL I want to create a car in the java realm
- from PL/SQL I need to give it license plates
- I need to start the engine of a scpecific car
However if I want more then 1 car then I need to be able to refrence them. How is this done?
Somehow I need to be able to execute the following in PL/SQL:
DECLARE
vMyCar_Porsche CAR;
vMyCar_Fiat CAR;
BEGIN
vMyCar_Porsche = new CAR();
vMyCar_Fiat = new CAR();
vMyCar_Porsche.setLicensePlates('FAST');
vMyCar_Porsche.startEngine();
vMyCar_Fiat.killEngine();
END;
Thanks in advance.
Best Regards,
Ruben
My current example code is the following:
JAVA:
===
CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED CODAROUL."RMG/BO/RMG_OBJECT" as package RMG.BO;
public class RMG_OBJECT {
private static RMG_OBJECT instance = new RMGOBJECT();
private String rmgObjectNaam;
private RMG_OBJECT(){
this.rmgObjectNaam = "NonDetermined";
public static String GET_RMGOBJECT_NAAM () {
String toestand = null;
if (_instance == null) {toestand = "DOES NOT EXIST";} else { toestand = "EXISTS";};
System.out.println("instance : " + toestand);
System.out.println("object name is : " + _instance.rmgObjectNaam);
return _instance.rmgObjectNaam;
public static Integer SET_RMGOBJECT_NAAM (String IN)
try
_instance.rmgObjectNaam = IN;
return 1;
catch (Exception e)//catch
System.out.println("Other Exception: " + e.toString());
e.printStackTrace();
return 5;
} //catch
PL/SQL Wrapper:
==========
CREATE OR REPLACE FUNCTION CODAROUL.SET_RMGOBJECT_NAAM(NAAM IN VARCHAR2) return NUMBER AS
LANGUAGE JAVA NAME 'RMG.BO.RMG_OBJECT.SET_RMGOBJECT_NAAM (java.lang.String) return java.lang.Integer';
Calling from SQL:
==========
CALL dbms_java.set_output(2000);
select CODAROUL.GET_RMGOBJECT_NAAM() from dual;
Edited by: RubenS_BE on Apr 6, 2012 5:35 AM
Edited by: 925945 on Apr 6, 2012 5:41 AM

You can do this by manually creating a new iterator binding in your binding tab.
So instead of dragging the VO directly to the page, go to the binding tab, add a new executable iterator binding, and point to that one from your ELs in the page itself.

Disable parallel slaves from multiple instances in RAC.

Similar Messages

Maybe you are looking for