Disable USB Selective Suspend Setting for Windows 7 via GPO/Registry

<dir><dir>
We would like to disable the usb selective suspend setting on our Windows 7 computers and can not find a way to do it without having to touch every computer.
Is there a registry setting or GPO setting we can change to make this easier.
We tried this registry entry and did not work. It seems it is only for Vista/XP
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB
Entry: DisableSelectiveSuspend
Type: DWORD
Value: 1 disables selective suspend mode. 0 enables selective suspend mode.
</dir>
</dir>
Thanks in advance for any help on this.

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will
mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios. If the issue still persists, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer as you
wish.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other
community members facing similar problems. Thanks for your understanding and efforts.
Regards,
Leo Huang
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Leo Huang
TechNet Community Support

Similar Messages

How to Disable Usb Selective Suspend Setting For Windows 8.1 Via Gpo/Registry

Hello everyone,
Could help me with a question ?
How do I disable USB Seletive Suspended settings in Windows 8.1 is GPO / Registry ?

Good morning.
The procedure worked , sorry for the delay because the tests were running in the environment, will replicate via GPO solution.
I appreciate the help .

Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
on the 32 bit machines I was able to apply this hotfix
http://support2.microsoft.com/kb/2738898
But it will not install on 64 bit machines.
Is there a hotfix for 64 bit? If not, what is the work around?
Thanks!
Robert

Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Error "Lead selection not set for context node"

Hi everyone,
I've got a Tree control in WebDynpro ABAP and I've implemented an "expand all" button.
Here's the coding:
METHOD expand_node_rec.
DATA lo_el_child TYPE REF TO if_wd_context_element.
DATA lo_node_children TYPE wdr_context_child_map.
DATA wa_lo_node_children LIKE LINE OF lo_node_children.
DATA lo_nd_child TYPE REF TO if_wd_context_node.
DATA lo_kschl TYPE klschl.
DATA lv_has_children TYPE boolean.
lo_el_child = node->get_element( ).
lo_node_children = node->get_child_nodes( ).
node->get_attribute( EXPORTING name = 'KSCHL' IMPORTING value = lo_kschl ).
node->get_attribute( EXPORTING name = 'HAS_CHILDREN' IMPORTING value = lv_has_children ).
IF lv_has_children = abap_true.
    node->set_attribute( name = 'IS_EXPANDED' value = abap_true ).
ENDIF.
LOOP AT lo_node_children INTO wa_lo_node_children.
    lo_nd_child = wa_lo_node_children-node.
    me->expand_node_rec( node = lo_nd_child ).
ENDLOOP.
ENDMETHOD.
However I'm getting the error above: "Lead selection not set for context node".
Any suggestions?
Edited by: DEVELOPMENT THEMIS on Jul 7, 2011 6:34 PM

hi developement Themis,
I think u didn't diclare "node" as context node. So declare it as a context node before using as a context node..as below
DATA node TYPE REF TO if_wd_context_node.
or u can use "lo_nd_child " as ur context node in ur program in place of "node"
then I think this error will be removed.
thanks,
simadri

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

SAPGUI for Windows via Portal - problem with frame

We are launching SAPGUI for Windows via Portal to drive single sign-on via AD. Our problem is that when SAPGUI launches, it is contained within an IE browser frame that causes some of the SAPGUI screens to not fit on the screen well. Those same screens fit just fine if we launch SAPGUI directly.
Is there any way to launch SAPGUI from Portal, with SSO enabled, but without the IE frame around it?

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
I downloaded the latest driver from the site...
NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
What to do?
error:

Use the windows XP driver. They normally work fine.

How do I display lyrics for current selection in Itunes for windows?

How do I display lyrics for current selection in Itunes for windows? I have lyrics for many songs, am losing hearing and enjoy seeing the lyrics to remind me of my memory of the song...

try this.. http://www.lyricsplugin.com/
good luck.

I have a ipod nano 4th gen set for windows. I have a mac now how do I set it for mac

I have an iPod nano 4th gen Its set for windows I now have a Mac How do I set it for Mac? I reset it so its empty. I'm starting a new music library on my mac.

On a Mac, click here and follow the instructions.
(117387)

Disable USB driver installation from searching Windows Updates for software

Hello,
When a plug-n-play device is connected to a Windows 7 system, the system by default tries to search Windows update for compatible drivers. I have a preconfigured driver store on each system that will have the drivers for all of the USB devices we care
about so I'd like to search the local driver store first before searching for Windows updates.
I found the option that controls this under System Properties > Advanced system settings > Hardware tab > Device Installation Settings. I have set this option before my machines run through sysprep, however, sysprep appears to be resetting
the option back to the Windows default (Yes, do this automatically) and ignores what I set it to.
I have a reg key that I'm running post-sysprep, but I'd like to avoid this as it's an extra step and I don't want to have to account for it long-term. My question is, is there a way to set this option in my sysprep unattend file?

If this is a domain joined machine, this can be set by a Group Policy Object;
Open Group Policy Management Editor.
In the navigation pane, open Computer Configuration\Administrative Templates\System\Internet Communication Management\Internet
Communication settings.
In the details pane, double-click Turn off Windows Update device driver searching.
Do one of the following:
To turn off searching Windows Update, click Enabled.
To allow searching Windows Update, click Disabled.
Click OK to save your settings.
Instructions taken from: http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
If this PC is not on the domain (but is Pro) you may be able to set the same option on the Local Group Policy (GPEDIT.MSC).
Kind Regards
Barry

Oracle 9.2.0.3.0 patch set for windows - questions

Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;

I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

USB Printers and Bonjour for Windows

Hi
I have an Epson Photo RX500 printer scanner attached via USB to my eMac. I am planning to upgrade to Tiger (OS X 10.4.4) and would like to use Bonjour to allow PCs on my home LAN access the printer.
My question is "Is the RX500 compatible with Bonjours or can only certain printers by used, and if so whgere can I find out which printers are Bonjour enabled?"
Many thanks
Mick
eMAc Mac OS X (10.3.9)

Installing Bonjour for Windows on your PCs will allow them to discover the Epson Printer but not in the way you think.
The Epson Photo RX500 does not have direct support for Bonjour (Zeroconf), only network printers can be configured to support it.
In your case, upgrading to Tiger (10.4.x) and attaching the printer to that Mac and turning on printer sharing will allow the PCs to discover the printer connected to the Mac.
Make sure you install the drivers for the printer on the PCs, if they don't already come with them, so the PCs know the features available in the printer.

USB Serial Controller Driver for windows 7 64bit

USB Serial Controller Driver for hp 15-g049au windows 7 64bit
This question was solved.
View Solution.

Hi,
Install the Chipset drivers on the following link and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2032
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

USB RS232/4 Driver for Windows CE

I'm using USB RS232/4 device well with my laptop. I wonder whether i can use the device directly connected with Windows CE system instead of Windows XP system.
I have LabView PDA Module and a single board computer operated by Windows CE.NET 4.2.
Is there any driver of the device for Windows CE system?

Windows CE is very different from Windows XP and currently the NI-Serial drivers is not supported on Windows CE. If you feel that this would be a valuable feature please file a product suggestion by going to Contact NI and click on the feedback link.
-Josh

Disabling UTF in Client 2 for Windows Vista

Hi,
has anybody disabled UTF-8 support in Novell Client 2 for Windows Vista?
Is it possible?
Many thanks for an advice.
M. Novotny

Miroslav,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Disable USB Selective Suspend Setting for Windows 7 via GPO/Registry

Similar Messages

Maybe you are looking for