Disabling G/L Account field in MIGO transaction

HIiya Gurus,
                 I have got a requirement to disable the GL Account field in Accounting tab in the MIGO transaction. since i am an abaper i am not sure how to disable this field. i have gone through the transaction SPRO , but unfortunately for the filed G/L Account field KONTO  there are only 2 options :--
either to make it optional or mandatory.
                 But my requirement is to make it disabled (greyed out), IS it possible to Grey out that field.
In my customization this field is set as Option.
               Kindly provide me with your valuable suggestions.
Cheers,
ZIa

Hi,
Use this BADI 'MB_MIGO_BADI'
Do write the code in PBO of the screen.......which you have created ....
In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZZGBAGS'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Regards
krishna
Edited by: Krishna Gowrneni on May 1, 2009 12:25 AM
Edited by: Krishna Gowrneni on May 1, 2009 12:39 AM

Similar Messages

  • Hiding G/L Account field in MIGO transaction (Goods Issue)

    Dear Gurus,
    Anyone knows how I can hide the G/L account in the MIGO transaction (Goods Issue).
    Thanks,
    John.

    Hi
    Try it in Tcode OMBW
    In that select the particular field and change it to suppress..
    It will work
    Regards,
    raman

  • Disable G/L Account field in Account Assignment tab of ME22N

    Hi experts,
    My requirement is to disable G/L account field in account assignment tab of ME22N. Tried using badi ME_PROCESS_PO_CUST.
    I have searched forum for the same and tried out some solutions. But was unable to disable the field.
    Any help in this regard would be highly appreciated.
    Thanks in Advance.

    Hi farhan,
    Go to SHD0.
    write tcode : ME22N.
    Then write a transaction variant with Z..XYZ (Any name)
    then click on create. it will open Me22n screen.
    Then go to Account assignment category and simply come back it will record that screen.
    it will ask to give screen name just give it.
    then there is a chk box for OUTPUT ONLY. click that for GL Account.
    and save it and come to SHD0 screen.
    then in STANDARD VARIANT tab, activate that transaction variant u created.
    Now chk tcode ME22N. it will reflect.
    REMEMBER: after transporting to Quality or Production server, u have to activate this variant manually.Otherwise it will not reflect.
    Regards,
    Ankur.

  • How to add a new field in migo transaction (header level)

    hi guru's
    can you please tell me how to add a field in migo transaction?
    i want to add a field in header data and that too under "general" tab. i dont have data regarding that field.
    and when we enter a value for that field in migo, it has to take .
    thank you.

    Hi, My problem is allmost like the one you are discussing here....
    I have appended MKPF for my Z-fields and created a sub-screen (Design the screen). I am calling this screen in PBO_HEADER. Now i can see my newly created tab along with fields.
    Now the problem is:-
    1. How I can transfer that data entered in screen fields back to my BADI.
    2. How to update my z-fields in MKPF table along with standard fields. I have tried using FM - 'J_1IEXGM_BADI_POST_DOCUMENT' in Method - POST_DOCUMENT, but its not updating table record in MKPF for Z-Fields.
    Please advice.....
    Thanks

  • Disable G/L account field in Shopping cart screen

    Hi SDN,
    I am ABAP Developer and new to the SRM system, I got a requirement to disable G/L account field in the Shopping cart creation screen and overview screen and also I have to disable  the message that is triggered when the G/L account field not entered .
    Please guide me to achieve this requirement.
    Thanks in advance,
    Srinivas D.

    Hi,
    I guess you use current SRM 7.0 version.
    You can control the field visibility by Meta Data customizing. SRM -> SRM Server -> Cross-Application Basic settings -> Extensions and Field Control(Personalization) -> Configure Field Control.
    Regards,
    Masa

  • Additional fields in MIGO transaction

    Hi Everybody,
      We have a requirement where we need to have additional fields in MIGO transaction when the user chooses 'distribute qty' option to split the quantity, the normal screen shows the following fields,
    1. Qty in UnE
    2. Stock type
    3. Movement type
    4.Stor location, we need Serial number, Drum number in Screen number 1000 of SAPLMIGO program,  Can any one tell me how do I achieve this functionality,
    Rgds,

    The only option I see is design your own custom screen with the required fields and call it as popup ( Modal Dialog Box ) from user exit ZXMBCU02 .
    This user exit will be triggered when you click on "CHECK" or "SAVE" button.
    There is no way to modify MIGO screen itself , so maybe you will have to pass the item number etc from MIGO and have a table control on your custom screen for data entry.
    For saving data into database donot use this exit as a user may just check and go out and you will unnecssarily push the data into z table . In this exit do an export to memory for your custom fields.
    In another exit ZXMBCU01 , do an import from memory and update the required Z table . This exit is called while updating material document in update task.
    However to goto popup screen for displaying chnaging custom fields you will have to press "CHECK" button , maybe a user training issue.
    Cheers

  • Possibility of adding new fields to migo transaction

    Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
    Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

    Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
    or Check SAP Note 339448 - MIGO: settings of table control
    2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

  • Regarding - add a new field in migo transaction

    Hai guys,
         i need to add  one field in MIGO transaction, can u pls tell me the step by step procedure for adding the new field in migo transaction.
    Regards,
    N.selvamuthukumar.

    Hi Selvamuthu,
    It is possible using the BADI MB_MIGO_BADI to add Additional tabs in header and/or item as required
    MB_MIGO_BADI  -> BAdI in MIGO for External Detail Subscreens
    See the documentation below...........
    With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the interface of the goods movements transaction ( MIGO) with additional tabstrip controls for the detailed information (detail tabstrips) and header information (header tabstrips). It is possible for an external application
    to display an additional detail tabstrip with own subscreen (max. 10 lines) in MIGO
    to display an additional header tabstrip with own subscreen (max. 3 lines) in MIGO
    The program name, screen number and tab page text can be determined dynamically. Different screens can therefore be controlled according to the mode (for example, change mode, display mode, goods receipt, goods issue).
    To read the complete documentation  --go to se18 --click on BADI -- enter -- MB_MIGO_BADI----Display
    inside click on "DOCUMENTATION" button and there is a complete documentation step by step
    in addition to it ...--go to se18 --click on BADI -- enter -- MB_MIGO_BADI----Display ->
    on the top menu -> "GOTO" -> sample code -> "Display"
    in will get the "methods" tab..see the description
    Initialization and Registration of Ext. Detail Screens
    PBO of Detail Screen
    PAI of Detail Screen
    Add / Change a Line (GOITEM)
    Delete a Line (GOITEM)
    MIGO Reset (Delete All Internal Data)
    Post Goods Movement
    Check Item Data of Goods Movement
    Mode of Transaction MIGO (Action / Reference Document)
    Status Information and Header Data
    Save Held Data
    Load Held Data
    Delete Held Data
    PBO of Header Screen
    PAI of Header Screen
    Check Header Data of Goods Movement
    Publish Item Data After Processing
    sample code is given in these methods..so when we create a custom badi implementation of our own go to the sample code and copy the required code in the corresponding methods as required
    double click on the method..for eg:IF_EX_MB_MIGO_BADI~PBO_HEADER  in the sample code to see code....in this particular method we can see how method calls an external program and screen to create a new tab in MIGO...use code from mainly the following to get a new header/item tab
    PBO of Header Screen
    PAI of Header Screen
    PBO of Detail Screen
    PAI of Detail Screen
    Pls take some time to analyse the code or flow but we can have the tabs in the header/item level
    Hope it helps
    Regards
    Byju

  • Table used in goitem fields in MIGO transaction.

    Hello experts,
    I was given to write BDC for MIGO transaction.
    Please any one suggest me how to get the following fields (from which table) .
    material text - maktx,
    Quantity in Une - ERFMG
    batch number - CHARG
    external entered posting amt in local currency - EXBWR
    please do me the requested favor,
    advanced thanks,
    vijay

    Hi,
    Better way i`ll tell you how to find the database tables.
    Goto the transaction CV03.
    Get the program name.
    SYSTEM ---> STATUS ---> PROGRAM(GUI)
    The program name for this transaction SAPLCV00.
    Copy this program name.
    Goto SE38. Open this program.
    Get the package name.
    GOTO ---> ATTRIBUTES ---> PACKAGE
    The package for this program is CV.
    Copy the package name.
    Goto to SE80 or Click on Display Object List(CtrlShiftF5) button which is on the toolbar.
    Select package and open the package name.
    You will get the list of business engeneering, dict.objs, class library, programs etc.
    Goto Dict.objects ---> Database tables.
    All the tables related to this transaction are given here.
    Use these steps to find the tables, programs, function grps etc
    whenever required.
    Hope this solves your problem.
    Thanks,
    Darpana.

  • Addition of Dept ans Section input fields in MIGO transaction.

    Hi experts,
    im very new to customer exits.  I got requirement to add two input fields in 'OWN DATA' in MIGO transaction. These fields should be for selected movement types.
    Can any one please help me in solving this. Please kindly tell me in detail as im new to enhancements.
    advance
    thanks
    vijay.

    SEARCH in SCN for these badi you will get lot of posts.
    MB_MIGO_ITEM_BADI,MB_MIGO_BADI

  • EXIT NAME OR BADI FOR FIELD IN MIGO TRANSACTION

    Hai all,
    In MIGO transaction,  I want to know the BADI or EXIT NAME in which the following fields are avilable .
    Fields name: exgrp, EXCISE_ACTION
    exact screen field name is : J_1IEXHEAD-EXGRP
                                             J_1IEXHEAD-EXCISE_ACTION
    Full Points will be given for correct answer
    Thanks in advance.
    s.senthil kumar

    Hai all,
    In MIGO transaction,  I want to know the BADI or EXIT NAME in which the following fields are avilable .
    Fields name: exgrp, EXCISE_ACTION
    exact screen field name is : J_1IEXHEAD-EXGRP
                                             J_1IEXHEAD-EXCISE_ACTION
    Full Points will be given for correct answer
    Thanks in advance.
    s.senthil kumar

  • EXIT NAME OR BADI FOR FIELD IN MIGO TRANSACTION (full poins will be given)

    Hai all,
    VERY URGENT REQ.
    In MIGO transaction, I want to know the BADI or EXIT NAME in which the following fields are avilable .
    Fields name: exgrp, EXCISE_ACTION
    exact screen field name is : J_1IEXHEAD-EXGRP
    J_1IEXHEAD-EXCISE_ACTION
    Full Points will be given for correct answer.
    Thanks in advance.
    s.senthil kumar

    Hi,
    Try this code .We can get the User exits and Badis for the Tcode.
    Code:
    & Report ZPJA_PM002 (Ver4) &
    & PJA Consultancy Services (www.pjas.com) &
    & This report attmpts to find Enhancements, Program-Exits, BADIs &
    & and Business Transaction Events in a particular program/tcode. &
    & Other search options: &
    & Program: RPR_ABAP_SOURCE_SCAN &
    & FModule: &
    & Text Elements: &
    & P_DEVC Show user-exits from development class &
    & P_LIMIT Limit submit program selection &
    & P_FUNC Show function modules &
    & P_SUBM Show submit programs &
    & S01 Selection data (TCode takes precedence over program name) &
    report zpja_pm002
    no standard page heading
    line-size 221.
    data: tabix like sy-tabix,
    w_linnum type i,
    w_off type i,
    w_index like sy-tabix,
    w_include like trdir-name,
    w_prog like trdir-name,
    w_incl like trdir-name,
    w_area like rs38l-area,
    w_level,
    w_fsel like sy-ucomm, " Determination of screen field
    w_str(50) type c,
    w_funcname like tfdir-funcname.
    constants: c_fmod(40) type c value 'Function modules selected: ',
    c_subm(40) type c value 'Submit programs selected: ',
    c_col1(12) type c value 'Enhanmt Type',
    c_col2(40) type c value 'Enhancement',
    c_col3(30) type c value 'Program/Include',
    c_col4(20) type c value 'Enhancement Name',
    c_col5(40) type c value 'Enhancement Description',
    c_col6(8) type c value 'Project',
    c_col7(1) type c value 'S',
    c_col8(12) type c value 'ChangeName',
    c_col9(10) type c value 'ChangeDate'.
    Work Areas: ABAP Workbench
    data: begin of wa_d010inc.
    data: master type d010inc-master.
    data: end of wa_d010inc.
    data: begin of wa_tfdir.
    data: funcname type tfdir-funcname,
    pname type tfdir-pname,
    include type tfdir-include.
    data: end of wa_tfdir.
    data: begin of wa_tadir.
    data: devclass type tadir-devclass.
    data: end of wa_tadir.
    data: begin of wa_tstc.
    data: pgmna type tstc-pgmna.
    data: end of wa_tstc.
    data: begin of wa_tstcp.
    data: param type tstcp-param.
    data: end of wa_tstcp.
    data: begin of wa_enlfdir.
    data: area type enlfdir-area.
    data: end of wa_enlfdir.
    Work Areas: BADIs
    data: begin of wa_sxs_attr.
    data: exit_name type sxs_attr-exit_name.
    data: end of wa_sxs_attr.
    data: begin of wa_sxs_attrt.
    data: text type sxs_attrt-text.
    data: end of wa_sxs_attrt.
    Work Areas: Enhancements
    data: begin of wa_modsap.
    data: member type modsap-member.
    data: end of wa_modsap.
    data: begin of wa_modsapa.
    data: name type modsapa-name.
    data: end of wa_modsapa.
    data: begin of wa_modsapt.
    data: modtext type modsapt-modtext.
    data: end of wa_modsapt.
    Work Areas: Business Transaction Events
    data: begin of wa_tbe01t.
    data: text1 type tbe01t-text1.
    data: end of wa_tbe01t.
    data: begin of wa_tps01t.
    data: text1 type tps01t-text1.
    data: end of wa_tps01t.
    user-exits
    types: begin of ty_mod,
    member like modact-member,
    name like modact-name,
    status like modattr-status,
    anam like modattr-anam,
    adat like modattr-adat,
    end of ty_mod.
    data: w_mod type ty_mod.
    types: begin of t_userexit,
    type(12) type c,
    pname like trdir-name,
    txt(300),
    level type c,
    modname(30) type c,
    modtext(60) type c,
    modattr type ty_mod,
    end of t_userexit.
    data: i_userexit type standard table of t_userexit with header line.
    Function module developmnet classes
    types: begin of t_devclass,
    clas like trdir-clas,
    end of t_devclass.
    data: i_devclass type standard table of t_devclass with header line.
    types: begin of t_enlfdir,
    area type enlfdir-area,
    end of t_enlfdir.
    data: i_enlfdir type standard table of t_enlfdir with header line.
    Submit programs
    types: begin of t_submit,
    pname like trdir-name,
    level,
    done,
    end of t_submit.
    data: i_submit type standard table of t_submit with header line.
    Source code
    types: begin of t_sourcetab, "#EC * (SLIN lügt!)
    line(200), "#EC * (SLIN lügt!)
    end of t_sourcetab. "#EC * (SLIN lügt!)
    data: sourcetab type standard table of t_sourcetab with header line.
    data c_overflow(30000) type c.
    Description of an ABAP/4 source analysis token
    data: i_stoken type standard table of stokex with header line.
    data wa_stoken like i_stoken.
    Description of an ABAP/4 source analysis statement
    data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
    keywords for searching ABAP code
    types: begin of t_keywords,
    word(30),
    end of t_keywords.
    data: keywords type standard table of t_keywords with header line.
    function modules within program
    types: begin of t_fmodule,
    name like rs38l-name,
    pname like trdir-name,
    pname2 like trdir-name,
    level,
    bapi,
    done,
    end of t_fmodule.
    data: i_fmodule type standard table of t_fmodule with header line.
    & Selection Options &
    selection-screen begin of block selscr1 with frame title text-s01.
    parameter: p_pname like trdir-name memory id rid,
    p_tcode like syst-tcode,
    p_limit(4) type n default 100,
    p_devc like rihea-dy_ofn default ' ',
    p_func like rihea-dy_ofn default ' ',
    p_subm like rihea-dy_ofn default ' '.
    selection-screen end of block selscr1.
    & START-OF-SELECTION &
    start-of-selection.
    if p_pname is initial and p_tcode is initial.
    message e008(hrfpm). "Make entry on the selection screen
    stop.
    endif.
    ensure P_LIMIT is not zero.
    if p_limit = 0.
    p_limit = 1.
    endif.
    perform data_select.
    perform get_submit_data.
    perform get_fm_data.
    perform get_additional_data.
    perform data_display.
    & Form DATA_SELECT &
    form data_select.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get programs/includes' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    determine search words
    keywords-word = 'CALL'.
    append keywords.
    keywords-word = 'FORM'.
    append keywords.
    keywords-word = 'PERFORM'.
    append keywords.
    keywords-word = 'SUBMIT'.
    append keywords.
    keywords-word = 'INCLUDE'.
    append keywords.
    if not p_tcode is initial.
    get program name from TCode
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    if not wa_tstc-pgmna is initial.
    p_pname = wa_tstc-pgmna.
    TCode does not include program name, but does have refereve TCode
    else.
    select single param from tstcp into wa_tstcp-param
    where tcode eq p_tcode.
    if sy-subrc = 0.
    check wa_tstcp-param(1) = '/'.
    check wa_tstcp-param+1(1) = '*'.
    if wa_tstcp-param ca ' '.
    endif.
    w_off = sy-fdpos + 1.
    subtract 2 from sy-fdpos.
    if sy-fdpos gt 0.
    p_tcode = wa_tstcp-param+2(sy-fdpos).
    endif.
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    p_pname = wa_tstc-pgmna.
    if sy-subrc 0.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    else.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    endif.
    endif.
    Call customer-function aus Program coding
    read report p_pname into sourcetab.
    if sy-subrc > 0.
    message e017(enhancement) with p_pname raising no_program."#EC *
    endif.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    overflow into c_overflow
    with includes.
    if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
    message e130(enhancement) raising syntax_error. "#EC *
    endif.
    check I_STOKEN for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '0'.
    w_prog = ''.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endform. "DATA_SELECT
    & Form GET_FM_DATA &
    form get_fm_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get function module data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure. "#EC *
    Function module data
    sort i_fmodule by name.
    delete adjacent duplicates from i_fmodule comparing name.
    loop at i_fmodule where done ne 'X'.
    clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
    refresh: i_stoken, i_sstmnt, sourcetab.
    store function groups
    select single area from enlfdir into wa_enlfdir-area
    where funcname = i_fmodule-name.
    i_enlfdir-area = wa_enlfdir-area.
    append i_enlfdir.
    Store development classes
    if not wa_enlfdir-area is initial.
    select single devclass into wa_tadir-devclass
    from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = wa_enlfdir-area.
    check not wa_tadir-devclass is initial.
    move wa_tadir-devclass to i_devclass-clas.
    append i_devclass.
    endif.
    clear wa_tfdir.
    select single funcname pname include from tfdir into wa_tfdir
    where funcname = i_fmodule-name.
    check sy-subrc = 0.
    call function 'FUNCTION_INCLUDE_SPLIT'
    exporting
    program = wa_tfdir-pname
    importing
    group = w_area.
    concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
    i_fmodule-pname = w_include.
    i_fmodule-pname2 = wa_tfdir-pname.
    modify i_fmodule.
    read report i_fmodule-pname into sourcetab.
    if sy-subrc = 0.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    message e130(enhancement) raising syntax_error.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '1'.
    w_prog = i_fmodule-pname2.
    w_incl = i_fmodule-pname.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    endloop.
    sort funtion groups
    sort i_devclass.
    delete adjacent duplicates from i_devclass.
    sort i_enlfdir.
    delete adjacent duplicates from i_enlfdir.
    endform. "GET_FM_DATA
    & Form GET_SUBMIT_DATA &
    form get_submit_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get submit data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    w_level = '0'.
    loop at i_submit where done ne 'X'.
    check i_submit-pname ne p_pname. " ensure not the same as origianl program
    clear: i_stoken, i_sstmnt, sourcetab.
    refresh: i_stoken, i_sstmnt, sourcetab.
    read report i_submit-pname into sourcetab.
    if sy-subrc 0.
    delete i_submit.
    continue.
    else.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    continue.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_prog = i_submit-pname.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    restrict number of submit program selected for processing
    describe table i_submit lines w_linnum.
    if w_linnum ge p_limit.
    w_level = '1'.
    endif.
    i_submit-done = 'X'.
    modify i_submit.
    endloop.
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    endform. "GET_SUBMIT_DATA
    & Form DATA_SEARCH &
    form data_search tables p_stoken structure stoken
    using p_level p_prog p_incl.
    loop at p_stoken.
    clear i_userexit.
    tabix = sy-tabix + 1.
    i_userexit-level = p_level.
    if i_userexit-level = '0'.
    if p_incl is initial.
    i_userexit-pname = p_pname.
    else.
    concatenate p_pname '/' p_incl into i_userexit-pname.
    endif.
    else.
    if p_incl is initial.
    i_userexit-pname = p_prog.
    else.
    concatenate p_prog '/' p_incl into i_userexit-pname.
    endif.
    endif.
    Include
    if p_stoken-str eq 'INCLUDE'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs 'STRUCTURE'.
    check not wa_stoken-str cs 'SYMBOL'.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Enhancements
    if p_stoken-str eq 'CUSTOMER-FUNCTION'.
    clear w_funcname.
    read table p_stoken index tabix.
    translate p_stoken-str using ''' '.
    condense p_stoken-str.
    if p_prog is initial.
    concatenate 'EXIT' p_pname p_stoken-str into w_funcname
    separated by '_'.
    else.
    concatenate 'EXIT' p_prog p_stoken-str into w_funcname
    separated by '_'.
    endif.
    select single member from modsap into wa_modsap-member
    where member = w_funcname.
    if sy-subrc = 0. " check for valid enhancement
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    append i_userexit.
    else.
    clear wa_d010inc.
    select single master into wa_d010inc-master
    from d010inc
    where include = p_prog.
    concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
    separated by '_'.
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    endif.
    endif.
    BADIs
    if p_stoken-str cs 'cl_exithandler='.
    w_index = sy-tabix + 4.
    read table p_stoken index w_index into wa_stoken.
    i_userexit-txt = wa_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-type = 'BADI'.
    append i_userexit.
    endif.
    Business transaction events
    if p_stoken-str cs 'OPEN_FI_PERFORM'.
    i_userexit-type = 'BusTrEvent'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-modname = i_userexit-txt+16(8).
    case i_userexit-txt+25(1).
    when 'E'.
    clear wa_tbe01t.
    select single text1 into wa_tbe01t-text1 from tbe01t
    where event = i_userexit-txt+16(8)
    and spras = sy-langu.
    if wa_tbe01t-text1 is initial.
    i_userexit-modtext = ''. "#EC NOTEXT
    else.
    i_userexit-modtext = wa_tbe01t-text1.
    endif.
    i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
    when 'P'.
    clear wa_tps01t.
    select single text1 into wa_tps01t-text1 from tps01t
    where procs = i_userexit-txt+16(8)
    and spras = sy-langu.
    i_userexit-modtext = wa_tps01t-text1.
    i_userexit-modname+8 = '/Process'.
    endcase.
    append i_userexit.
    endif.
    Program exits
    if p_stoken-str cs 'USEREXIT_'.
    i_userexit-type = 'Program Exit'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    append i_userexit.
    endif.
    Submit programs
    if p_stoken-str cs 'SUBMIT'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
    replace all occurrences of '''' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Perform routines (which reference external programs)
    if p_stoken-str cs 'PERFORM'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if not wa_stoken-ovfl is initial.
    w_off = wa_stoken-off1 + 10.
    w_str = c_overflow+w_off(30).
    find ')' in w_str match offset w_off.
    w_off = w_off + 1.
    wa_stoken-str = w_str(w_off).
    endif.
    check wa_stoken-str cs '('.
    w_off = 0.
    while sy-subrc = 0.
    if wa_stoken-str+w_off(1) eq '('.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    replace all occurrences of ')' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc 0.
    i_submit-pname = wa_stoken-str.
    append i_submit.
    endif.
    exit.
    else.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    shift wa_stoken-str left deleting leading space.
    endif.
    endwhile.
    endif.
    Function modules
    if p_stoken-str cs 'FUNCTION'.
    clear i_fmodule.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if wa_stoken-str cs 'WF_'.
    if wa_stoken-str cs 'IDOC'.
    break-point.
    endif.
    if wa_stoken-str cs 'BAPI'.
    i_fmodule-bapi = 'X'.
    endif.
    replace first occurrence of '''' in wa_stoken-str with space.
    replace first occurrence of '''' in wa_stoken-str with space.
    if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
    clear wa_tfdir.
    concatenate wa_stoken-str '%' into wa_stoken-str.
    select single funcname into wa_tfdir-funcname from tfdir
    where funcname like wa_stoken-str.
    if sy-subrc = 0.
    i_fmodule-name = wa_tfdir-funcname.
    else.
    continue.
    endif.
    else.
    i_fmodule-name = wa_stoken-str.
    endif.
    read table i_fmodule with key name = i_fmodule-name.
    if sy-subrc 0.
    i_fmodule-level = p_level.
    append i_fmodule.
    endif.
    endif.
    endloop.
    endform. "DATA_SEARCH
    & Form GET_ADDITIONAL_DATA &
    form get_additional_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get additional data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    loop at i_userexit.
    Enhancement data
    if i_userexit-type cs 'Enh'.
    clear: wa_modsapa.
    select single name into wa_modsapa-name from modsap
    where member = i_userexit-txt.
    check sy-subrc = 0.
    i_userexit-modname = wa_modsapa-name.
    clear wa_modsapt.
    select single modtext into wa_modsapt-modtext from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_modsapt-modtext.
    MOH - enhancement to get the project name
    clear w_mod.
    select single modactmember modactname modattr~status
    modattranam modattradat
    into w_mod
    from modact
    inner join modattr
    on modattrname = modactname
    where modact~member = wa_modsapa-name
    and modact~typ = space.
    i_userexit-modattr = w_mod.
    MOH - eoe
    endif.
    BADI data
    if i_userexit-type eq 'BADI'.
    clear wa_sxs_attr.
    select single exit_name into wa_sxs_attr-exit_name from sxs_attr
    where exit_name = i_userexit-txt.
    if sy-subrc = 0.
    i_userexit-modname = i_userexit-txt.
    else.
    i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
    endif.
    clear wa_sxs_attrt.
    select single text into wa_sxs_attrt-text from sxs_attrt
    where exit_name = wa_sxs_attr-exit_name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_sxs_attrt-text.
    endif.
    modify i_userexit.
    endloop.
    get enhancements via program package
    clear wa_tadir.
    select single devclass into wa_tadir-devclass from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = p_pname.
    if sy-subrc = 0.
    clear: wa_modsapa, wa_modsapt.
    select name from modsapa into wa_modsapa-name
    where devclass = wa_tadir-devclass.
    select single modtext from modsapt into wa_modsapt-modtext
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    read table i_userexit with key modname = wa_modsapa-name.
    if sy-subrc 0.
    i_userexit-modtext = wa_modsapt-modtext.
    i_userexit-type = 'Enhancement'. "#EC NOTEXT
    i_userexit-modname = wa_modsapa-name.
    i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
    i_userexit-pname = 'Unknown'. "#EC NOTEXT
    append i_userexit.
    endif.
    endselect.
    endif.
    Get IDOCs
    loop at i_devclass.
    endloop.
    endform. "GET_ADDITIONAL_DATA
    & Form DATA_DISPLAY &
    form data_display.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Prepare screen for display' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_userexit by type txt modname.
    delete adjacent duplicates from i_userexit comparing txt modname.
    format headings
    write: 'Enhancements from main program'. "#EC NOTEXT
    write: /.
    uline.
    format color col_heading.
    write: / sy-vline,
    (12) c_col1, "Enhanmt Type
    sy-vline,
    (40) c_col2, "Enhancement
    sy-vline,
    (30) c_col3, "Program/Include
    sy-vline,
    (20) c_col4, "Enhancement name
    sy-vline,
    (60) c_col5, "Enhancement description
    sy-vline,
    (8) c_col6, "Project
    sy-vline,
    (1) c_col7, "S
    sy-vline,
    (12) c_col8, "ChangeName
    sy-vline,
    (10) c_col9, "ChangeDate
    sy-vline.
    format reset.
    uline.
    format lines
    loop at i_userexit.
    set line colour
    case i_userexit-type.
    when 'Enhancement'.
    format color 3 intensified off.
    when 'BADI'.
    format color 4 intensified off.
    when 'BusTrEvent'.
    format color 5 intensified off.
    when 'Program Exit'.
    format color 6 intensified off.
    when others.
    format reset.
    endcase.
    write: / sy-vline,
    i_userexit-type,
    sy-vline,
    i_userexit-txt(40),
    sy-vline,
    i_userexit-pname(30),
    sy-vline,
    i_userexit-modname(20),
    sy-vline,
    i_userexit-modtext(60),
    sy-vline,
    i_userexit-modattr-name,
    sy-vline,
    i_userexit-modattr-status,
    sy-vline,
    i_userexit-modattr-anam,
    sy-vline,
    i_userexit-modattr-adat no-zero,
    sy-vline.
    hide: i_userexit-type,
    i_userexit-txt,
    i_userexit-pname,
    i_userexit-modname,
    i_userexit-modtext.
    endloop.
    format reset.
    uline.
    user-exits from development class of function modules
    if p_devc = 'X'.
    write: /.
    write: / 'User-exits from function module development class'."#EC NOTEXT
    write: 157''.
    uline (90).
    write: 157''.
    loop at i_devclass.
    clear wa_modsapa.
    select name from modsapa into wa_modsapa
    where devclass = i_devclass-clas.
    select single name modtext into corresponding fields of wa_modsapt
    from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    format color 3 intensified off.
    write: / sy-vline,
    (12) 'Enhancement',
    sy-vline,
    wa_modsapa-name,
    sy-vline,
    wa_modsapt-modtext,
    sy-vline.
    endselect.
    endloop.
    uline (90).
    format reset.
    endif.
    describe table i_fmodule lines w_linnum.
    write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_func = 'X'.
    display fuction modules used in program
    uline (38).
    write: 157''.
    loop at i_fmodule.
    write: sy-vline,
    i_fmodule-name,
    sy-vline,
    i_fmodule-bapi,
    sy-vline.
    write: 157''.
    endloop.
    uline (38).
    write: 157''.
    endif.
    describe table i_submit lines w_linnum.
    write: / c_subm , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_subm = 'X'.
    display submit programs used in program
    uline (44).
    write: 157''.
    loop at i_submit.
    write: sy-vline,
    i_submit-pname,
    sy-vline.
    write: 157''.
    endloop.
    uline (44).
    endif.
    issue message with number of user-exits displayed
    describe table i_userexit lines w_linnum.
    message s697(56) with w_linnum.
    endform. "DATA_DISPLAY
    & User Selection Processing &
    at line-selection.
    get cursor field w_fsel.
    case w_fsel.
    when 'I_USEREXIT-MODNAME'.
    case i_userexit-type.
    when 'Enhancement'.
    set parameter id 'MON' field i_userexit-modname.
    call transaction 'SMOD' and skip first screen.
    when 'BADI'.
    check i_userexit-modname ne 'Dynamic call'.
    set parameter id 'EXN' field i_userexit-modname.
    call transaction 'SE18' and skip first screen.
    when 'BusTrEvent'.
    submit rfopfi00 with attr_typey_selm = 'A'
    with event = i_userexit-modname(8)
    via selection-screen
    and return.
    when others.
    endcase.
    when 'I_USEREXIT-PNAME'.
    check i_userexit-modname ne 'Unknown'.
    w_off = 0.
    find '/' in i_userexit-pname match offset w_off.
    if w_off = 0.
    set parameter id 'RID' field i_userexit-pname.
    call transaction 'SE38' and skip first screen.
    else.
    w_off = w_off + 1.
    w_prog = i_userexit-pname+w_off.
    set parameter id 'RID' field w_prog.
    call transaction 'SE38' and skip first screen.
    endif.
    when others.
    endcase.
    Thank You,
    Saritha

  • Flagging of Item OK field in MIGO transaction

    Hi all,
    Is there any option to flag the Item OK field for multiple line items in MIGO  (select all option)  as the User is ticking the item OK field for line items individually.
    thanks in advance.
    regards,
    Kumar

    Dear all,
    Thanks, through default values i can attain this,, my issue is solved,, awarded points to all.
    this thread is closed.
    regards,
    Kumar

  • Disable GL Account Field for editing in the Shopping Cart SRM 7.0

    Hi,
      We would like to disable the GL Account field for editing only on the Shopping Cart Approval Screen. I tried to implement this through configuration of Metadata Dynamic Class in SPRO->SRM Application Server ->Cross Application Basic Settings->Extension & Field Control ->Configure Control for Fields of substructure. But the class is not getting triggered.
      Any help would be appreciated. We are on SRM 7.0
    Thanks
    Raghav

    Hi Rohit,
    Try to activate the view and component and then see. If this does not works, create an enhancement for the view and write the below code in method WDDOMODIFYVIEW
    DATA btn_confirm TYPE REF TO cl_wd_button.
      btn_confirm ?= view->get_element( 'AUTO_CONFIRMATION' ).
      if btn_confirm is BOUND.
        btn_confirm->SET_TEXT( value = 'Confirmation' ). 
      endif.
    This code will set the button text as 'Confirmation' .
    Regards,
    Anubhav

  • R12 : Disable "Create accounting" action in AR Transactions

    Hi,
    I would like to disable the Create accounting" action in AR Transactions for a responsibility.
    Could somebody help me please?
    Thank you
    Tiana

    Hi Tiana;
    What is your EBS version. Please check below:
    http://oraclefinancial.wordpress.com/2010/11/02/how-to-disable-create-online-accounting-in-payables/
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/disable-create-accounting-check-box-3340367 << u may need form costumizaiton
    Regard
    Helios

Maybe you are looking for