Disabling onboard video

I have the MSI Motherboard G31TM-P21, how do I disable the onboard video.
Thanks,
George

In your bios there should be an option where you can enable/disable the onboard vga.
Or do as Wonk said and stick a vga card in the board.

Similar Messages

  • Disable onboard Video

    I have a onboard GeForce 6150SE, nForce 430, I want to change to GeForce 8400, My computer won't detect the new card, I changed bios to 16X and still won't find it, how do I disable onboard card and what do I need to change for the new one to load?- Do I need to change legacy boot?

    I finally fixed it.  After flashing back to the newest bios, I did a hard CMOS clear and booted with just the mouse and keyboard plugged in to the top USB plugs (no LAN or audio hooked up) and it allowed me to disable it finally.
    Every motherboard can disable onboard video... Just because it is part of the 790GX chipset doesn't mean it can't be disabled.  There is some sort of bug I don't even know how to reproduce for this motherboard. 
    edit: after saving and restarting it took away the disabled option and only went back to UMA or UMA+Sideport.  MSI engineers and/or bios team fails hard.  This is the only board I've ever seen act this stupid.

  • Netvista 6648 and NVIDIA graphics / disable onboard video?

    Hello,
    I recently acquired a Netvista 6648 PIII machine, which I intended to put to use as a MythTV frontend. The system is equipped with a PCI riser. To provide TV-Out functionality, I purchased a simple PCI (not PCI-e) NVIDIA card. I have a similar model in another frontend of mine, which has been working great for some time at this point.
    Unfortunately, the machine seems to not want to allow the graphics card to be the default output device. In the BIOS, there is an option, which is selected, to 'prefer PCI.' However, the VGA-out of the onboard Intel chipset is never disabled and/or the PCI graphics card is never enabled.
    lspci reports a video device plugged into the bus -- any thoughts?

    I finally fixed it.  After flashing back to the newest bios, I did a hard CMOS clear and booted with just the mouse and keyboard plugged in to the top USB plugs (no LAN or audio hooked up) and it allowed me to disable it finally.
    Every motherboard can disable onboard video... Just because it is part of the 790GX chipset doesn't mean it can't be disabled.  There is some sort of bug I don't even know how to reproduce for this motherboard. 
    edit: after saving and restarting it took away the disabled option and only went back to UMA or UMA+Sideport.  MSI engineers and/or bios team fails hard.  This is the only board I've ever seen act this stupid.

  • Can't seem to disable onboard video on MSI motherboard 661FM3-L

    I have the following motherboard: MSI 661FM3-L. I'm running a Pentium 4 3.0Ghz with 1gb Ram on it. The motherboard works fine when I use the onboard video. I've now installed an ATI PowerColor 256 AGP 8x graphics card but the motherboard doesn't seem to use it. I plug the monitor into the graphics card and I can see the boot screen and go to bios but when windows begins to load the screen is all scrambled and then the monitor goes blank. I've changed in bios the first video setting (i'm not currently infront of the computer but its something along those lines) from PCI to AGP but I've noticed that when the systems first boots, on the first screen on the bottom line it shows the details of the onboard video card - SIS 651. It does not display the first splash screen of the ATI video card and so I'm guessing the onboard video is not properly disabled. I've checked the user manual and it does not state if there are any jumpers I need to change on the motherboard or if I need to change anything in BIOS. Can anyone help.
    Thanks

    apologies for lack of detail:
    System:
    MSI 661FM3-L
    Intel P4 3.0GHz
    1gb KingMax DDR400 DIMM
    Western Digital 80Gb HDD
    BIOS - latest update from MSI Live Update
    WinXP + SP2 + all latest Windows Updates
    Problem:
    System works fine using on-board video.
    Install PowerColor ATI 9600 Pro 256MB DDR AGP 8X video card, plug monitor to video card, system boots fine but when it gets to windows loading screen, the screen is all jumbled and then eventually screen goes black and monitor receives no signal. Attempted to load in windows Safe Mode and same thing happens.
    Checked BIOS settings. Can't find anything to disable onboard video other then the "first video" setting which I changed from PCI to AGP.
    The first boot screen which displays Memory count and Primary and Slave drives, displays a message on the bottom of the screen saying "SiS651" which is the name of the onboard video. Also there is no first splash screen of the ATI video card which I'm pretty sure should be seen before the first boot screen.
    Performed MSI LiveUpdate of BIOS in DOS mode and this didn't change anything.
    Video Card works fine on another PC.
    Motherboard manual does not specify to change any jumpers or BIOS settings.

  • How to disable onboard video on KM4M-L?

    Does anybody know how to disable the onboard video card of the KM4M-L?  I tried just plugging in another AGP card, but it doesn't work.  I've gone through the bios, but can't find any reference to the onbard video.
    Another question I have is which card is faster, the onboard video or my old Viper V770 with 32MBs of ram (I know, it's ancient!)
    Thanks in advance for your help.

    The viper but not by much. The o/b AGP is disabled automaticly but your problem is your board only supports AGPx4/1.5v cards.
    Have a read through this thread (it's a P4 board but the same applies).

  • How to disable onboard video chip (ms6337)

    Hi all.
    My mainboard is MS6337(815Epro , bios version:1.4)
    I've bought a new videocard ,so I want to disable the onboard video chip.
    Thanks for any help .

    I don't really have anything to compare with  :(
    I would need another i815E board to see if there is supposed to be a change at all.
    My guess is that since there is no 3D engine in the integrated VGA core you need very little memory bandwidth to run it:
    1024*768 @ 85 FPS 24bit = 1024*768*85*4=255MB/S
    The RAM is capable of 1066MB/S, but the PIII CPU never uses that anyway so there is no bandwidth conflict between the CPU and VGA.

  • KYN2G-ISLR--How can I disable onboard video?

     ?( Does anybody know how to disable the onboard video on a K7N2G-ISLR card?  
    I guess I'm an idiot, because I've been looking around in the manual, searching the bios, and searching this forum, and I can't find the information.  
    Help will be greatly appreciated.
     :D
    Thanks very much.

    :( Okay, sad news.  The power supply has been swapped out and it did not make a difference.  Sigh.  As I sit, I have the video card installed and the high pitched squeal is causing me hearing damage.  
    So ... (he says taking a deep breath) ... my train of thought currently goes like this ... it's either the video card or the motherboard.
    Now, when I uninstall the video card from the motherboard, the constant squeal goes away.  However, I also just noticed that even with the video card uninstalled, when the cd spins up--guess what?--squeeeeeeeel.  
    I assume that this tends to incriminate the motherboard, since there is squealing when the video card is not attached?  Someone please shout out if this is a stupid assumption.
    I have emails from tech support at both MSI and Sapphire, both of which are A) rather short, and B) say that I may have a defective product and that I may just have to get replacements.  I suppose I'll just contact Outpost.com and have them send me one of each.  Ack.  
    As always, thanks very much for any input you may have ...
    Ivan
    Oh yeah, high praise goes to the folks at Antec.  I called them yesterday and they had the replacement power supply to me by lunch today.

  • HOW TO DISABLE ONBOARD VIDEO - K9N SLI PLATINUM

    I've searched in BIOS and can't find where's it! any ideas?
    PD. I'm trying' to get better performance when playing CRYSIS on my rig  /whitout expense 400$ in a nvidia 8800GTS series...

    Quote from: Osiricat on 07-January-08, 12:47:16
    Now all is clear thanks to everyone! xD... I'll think about upgrade to 8800 series... any suggestion under 350$? what about eVGA 8800GTS 320MB, 8800GTS 512MB, 8800GTS 640MB? another question will be..., my PSU Cooler Master will work with this cards or what PSU would u recommend? thanks a lot
    512MB GTS version is a fastest one from all listed. Suggestions here:
    NX8800GTS-T2D512E-OC ---> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1370&maincat_no=130&cat2_no=136
    NX8800GTS-T2D512E ---> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1371&maincat_no=130&cat2_no=136
    For good PSU suggestions look here:  https://forum-en.msi.com/index.php?topic=112039.msg836246#msg836246

  • [SOLVED] switching from onboard video to a pci express card

    Hello,
    I have an onboard video card [VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)].
    I have been running the nouveau driver, but the video card is not truly supported so I bought a [VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)].
    However my lspci -k | grep -A 2 -i "VGA" gives this:
    00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
    Subsystem: Hewlett-Packard Company Device 2a6c
    Kernel driver in use: nouveau
    02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
    Subsystem: eVga.com. Corp. Device 1302
    Kernel driver in use: nouveau
    Kernel modules: nouveau
    Subsystem: eVga.com. Corp. Device 1302
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    And my xrandr -q gives:
    Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
    VGA-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
    1440x900 59.9*+ 75.0
    1400x1050 60.0
    1280x1024 60.0
    1280x960 60.0
    1152x864 75.0
    1280x720 60.0
    1024x768 75.1 70.1 66.0 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    I receive no output from the second card at all. Any help to troubleshoot this problem would be greatly appreciated. I simply would like to use one monitor through the VGA port on the new video card.
    thanks.
    Last edited by forshark (2013-05-30 19:10:25)

    Thanks for the reply,
    My bios isn't awesome enough to allow me to disable onboard video or set a default card. I'll hunt around for the rest. Also I am using lxdm if that is helpful. Heres my Xorg.0.log:
    [ 4.803]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 4.803] X Protocol Version 11, Revision 0
    [ 4.803] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 4.803] Current Operating System: Linux office 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    [ 4.803] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8e550028-e5f5-40c2-b8f9-f43ac9ebf8ef ro quiet
    [ 4.803] Build Date: 17 April 2013 02:37:06PM
    [ 4.803]
    [ 4.803] Current version of pixman: 0.30.0
    [ 4.803] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4.803] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4.803] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 12:51:52 2013
    [ 4.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4.808] (==) No Layout section. Using the first Screen section.
    [ 4.808] (==) No screen section available. Using defaults.
    [ 4.808] (**) |-->Screen "Default Screen Section" (0)
    [ 4.808] (**) | |-->Monitor "<default monitor>"
    [ 4.808] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4.808] (==) Automatically adding devices
    [ 4.808] (==) Automatically enabling devices
    [ 4.808] (==) Automatically adding GPU devices
    [ 4.812] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 4.812] Entry deleted from font path.
    [ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4.813] Entry deleted from font path.
    [ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4.813] Entry deleted from font path.
    [ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4.813] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 4.813] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4.813] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4.813] (II) Loader magic: 0x7fcc20
    [ 4.813] (II) Module ABI versions:
    [ 4.813] X.Org ANSI C Emulation: 0.4
    [ 4.813] X.Org Video Driver: 14.1
    [ 4.813] X.Org XInput driver : 19.1
    [ 4.813] X.Org Server Extension : 7.0
    [ 4.814] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 4.814] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4.816] (--) PCI:*(0:0:13:0) 10de:03d0:103c:2a6c rev 162, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
    [ 4.816] (--) PCI: (0:2:0:0) 10de:10c3:3842:1302 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
    [ 4.816] Initializing built-in extension Generic Event Extension
    [ 4.816] Initializing built-in extension SHAPE
    [ 4.816] Initializing built-in extension MIT-SHM
    [ 4.816] Initializing built-in extension XInputExtension
    [ 4.816] Initializing built-in extension XTEST
    [ 4.816] Initializing built-in extension BIG-REQUESTS
    [ 4.816] Initializing built-in extension SYNC
    [ 4.816] Initializing built-in extension XKEYBOARD
    [ 4.816] Initializing built-in extension XC-MISC
    [ 4.816] Initializing built-in extension SECURITY
    [ 4.816] Initializing built-in extension XINERAMA
    [ 4.816] Initializing built-in extension XFIXES
    [ 4.816] Initializing built-in extension RENDER
    [ 4.816] Initializing built-in extension RANDR
    [ 4.816] Initializing built-in extension COMPOSITE
    [ 4.816] Initializing built-in extension DAMAGE
    [ 4.816] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4.816] Initializing built-in extension DOUBLE-BUFFER
    [ 4.816] Initializing built-in extension RECORD
    [ 4.816] Initializing built-in extension DPMS
    [ 4.816] Initializing built-in extension X-Resource
    [ 4.817] Initializing built-in extension XVideo
    [ 4.817] Initializing built-in extension XVideo-MotionCompensation
    [ 4.817] Initializing built-in extension XFree86-VidModeExtension
    [ 4.817] Initializing built-in extension XFree86-DGA
    [ 4.817] Initializing built-in extension XFree86-DRI
    [ 4.817] Initializing built-in extension DRI2
    [ 4.817] (II) LoadModule: "glx"
    [ 4.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4.822] (II) Module glx: vendor="X.Org Foundation"
    [ 4.822] compiled for 1.14.1, module version = 1.0.0
    [ 4.822] ABI class: X.Org Server Extension, version 7.0
    [ 4.822] (==) AIGLX enabled
    [ 4.823] Loading extension GLX
    [ 4.823] (==) Matched nouveau as autoconfigured driver 0
    [ 4.823] (==) Matched nvidia as autoconfigured driver 1
    [ 4.823] (==) Matched nv as autoconfigured driver 2
    [ 4.823] (==) Matched nouveau as autoconfigured driver 3
    [ 4.823] (==) Matched nvidia as autoconfigured driver 4
    [ 4.823] (==) Matched nv as autoconfigured driver 5
    [ 4.823] (==) Matched nouveau as autoconfigured driver 6
    [ 4.823] (==) Matched nvidia as autoconfigured driver 7
    [ 4.823] (==) Matched nv as autoconfigured driver 8
    [ 4.823] (==) Matched vesa as autoconfigured driver 9
    [ 4.823] (==) Matched modesetting as autoconfigured driver 10
    [ 4.823] (==) Matched fbdev as autoconfigured driver 11
    [ 4.823] (==) Assigned the driver to the xf86ConfigLayout
    [ 4.823] (II) LoadModule: "nouveau"
    [ 4.823] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 4.826] (II) Module nouveau: vendor="X.Org Foundation"
    [ 4.826] compiled for 1.14.0, module version = 1.0.7
    [ 4.826] Module class: X.Org Video Driver
    [ 4.826] ABI class: X.Org Video Driver, version 14.1
    [ 4.826] (II) LoadModule: "nvidia"
    [ 4.827] (WW) Warning, couldn't open module nvidia
    [ 4.827] (II) UnloadModule: "nvidia"
    [ 4.827] (II) Unloading nvidia
    [ 4.827] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 4.827] (II) LoadModule: "nv"
    [ 4.827] (WW) Warning, couldn't open module nv
    [ 4.827] (II) UnloadModule: "nv"
    [ 4.827] (II) Unloading nv
    [ 4.827] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 4.827] (II) LoadModule: "vesa"
    [ 4.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 4.828] (II) Module vesa: vendor="X.Org Foundation"
    [ 4.828] compiled for 1.14.0, module version = 2.3.2
    [ 4.828] Module class: X.Org Video Driver
    [ 4.828] ABI class: X.Org Video Driver, version 14.1
    [ 4.828] (II) LoadModule: "modesetting"
    [ 4.828] (WW) Warning, couldn't open module modesetting
    [ 4.828] (II) UnloadModule: "modesetting"
    [ 4.828] (II) Unloading modesetting
    [ 4.828] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 4.828] (II) LoadModule: "fbdev"
    [ 4.829] (WW) Warning, couldn't open module fbdev
    [ 4.829] (II) UnloadModule: "fbdev"
    [ 4.829] (II) Unloading fbdev
    [ 4.829] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 4.829] (II) NOUVEAU driver
    [ 4.829] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 4.829] RIVA TNT (NV04)
    [ 4.829] RIVA TNT2 (NV05)
    [ 4.829] GeForce 256 (NV10)
    [ 4.829] GeForce 2 (NV11, NV15)
    [ 4.829] GeForce 4MX (NV17, NV18)
    [ 4.829] GeForce 3 (NV20)
    [ 4.829] GeForce 4Ti (NV25, NV28)
    [ 4.829] GeForce FX (NV3x)
    [ 4.829] GeForce 6 (NV4x)
    [ 4.829] GeForce 7 (G7x)
    [ 4.829] GeForce 8 (G8x)
    [ 4.829] GeForce GTX 200 (NVA0)
    [ 4.829] GeForce GTX 400 (NVC0)
    [ 4.829] (II) VESA: driver for VESA chipsets: vesa
    [ 4.829] (++) using VT number 7
    [ 4.834] (II) [drm] nouveau interface version: 1.1.0
    [ 4.834] (II) [drm] nouveau interface version: 1.1.0
    [ 4.834] (WW) Falling back to old probe method for vesa
    [ 4.834] (II) Loading sub module "dri"
    [ 4.834] (II) LoadModule: "dri"
    [ 4.835] (II) Module "dri" already built-in
    [ 4.835] (II) NOUVEAU(0): Loaded DRI module
    [ 4.835] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
    [ 4.835] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4.835] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 4.835] (==) NOUVEAU(0): RGB weight 888
    [ 4.835] (==) NOUVEAU(0): Default visual is TrueColor
    [ 4.835] (==) NOUVEAU(0): Using HW cursor
    [ 4.835] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 4.835] (==) NOUVEAU(0): Page flipping enabled
    [ 4.835] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 4.927] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 4.989] (II) NOUVEAU(0): EDID for output VGA-1
    [ 4.989] (II) NOUVEAU(0): Manufacturer: HSD Model: 240f Serial#: 0
    [ 4.989] (II) NOUVEAU(0): Year: 2010 Week: 52
    [ 4.989] (II) NOUVEAU(0): EDID Version: 1.3
    [ 4.990] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 4.990] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
    [ 4.990] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
    [ 4.990] (II) NOUVEAU(0): Gamma: 2.20
    [ 4.990] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 4.990] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 4.990] (II) NOUVEAU(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    [ 4.990] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 4.990] (II) NOUVEAU(0): Supported established timings:
    [ 4.990] (II) NOUVEAU(0): 720x400@70Hz
    [ 4.990] (II) NOUVEAU(0): 640x480@60Hz
    [ 4.990] (II) NOUVEAU(0): 640x480@67Hz
    [ 4.990] (II) NOUVEAU(0): 640x480@72Hz
    [ 4.990] (II) NOUVEAU(0): 640x480@75Hz
    [ 4.990] (II) NOUVEAU(0): 800x600@56Hz
    [ 4.990] (II) NOUVEAU(0): 800x600@60Hz
    [ 4.990] (II) NOUVEAU(0): 800x600@72Hz
    [ 4.990] (II) NOUVEAU(0): 800x600@75Hz
    [ 4.990] (II) NOUVEAU(0): 832x624@75Hz
    [ 4.990] (II) NOUVEAU(0): 1024x768@60Hz
    [ 4.990] (II) NOUVEAU(0): 1024x768@70Hz
    [ 4.990] (II) NOUVEAU(0): 1024x768@75Hz
    [ 4.990] (II) NOUVEAU(0): 1152x864@75Hz
    [ 4.990] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 4.990] (II) NOUVEAU(0): Supported standard timings:
    [ 4.990] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 4.990] (II) NOUVEAU(0): #1: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 4.990] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.990] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 4.990] (II) NOUVEAU(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 4.990] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4.990] (II) NOUVEAU(0): #6: hsize: 1024 vsize 768 refresh: 66 vid: 18017
    [ 4.990] (II) NOUVEAU(0): Supported detailed timing:
    [ 4.990] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 408 x 255 mm
    [ 4.990] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
    [ 4.990] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
    [ 4.990] (II) NOUVEAU(0): Serial No: 052AW1WY01107
    [ 4.990] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 75 kHz, PixClock max 145 MHz
    [ 4.990] (II) NOUVEAU(0): Monitor name: iP192A
    [ 4.990] (II) NOUVEAU(0): EDID (in hex):
    [ 4.990] (II) NOUVEAU(0): 00ffffffffffff0022640f2400000000
    [ 4.990] (II) NOUVEAU(0): 341401030a291a78eade95a3544c9926
    [ 4.990] (II) NOUVEAU(0): 0f5054bfee80950f90408180814081c0
    [ 4.990] (II) NOUVEAU(0): 714f614601019a29a0d0518422305098
    [ 4.990] (II) NOUVEAU(0): 360098ff1000001c000000ff00303532
    [ 4.990] (II) NOUVEAU(0): 41573157593031313037000000fd0038
    [ 4.990] (II) NOUVEAU(0): 4b184b0e000a202020202020000000fc
    [ 4.990] (II) NOUVEAU(0): 006950313932410a0a0a0a0a0a0a0047
    [ 4.991] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
    [ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4.991] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 4.991] (II) NOUVEAU(0): Output VGA-1 connected
    [ 4.991] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 4.991] (II) NOUVEAU(0): Output VGA-1 using initial mode 1440x900
    [ 4.991] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4.991] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 4.991] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 4.991] (**) NOUVEAU(0): Mode "1024x768": 71.6 MHz (scaled from 0.0 MHz), 52.7 kHz, 66.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
    [ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 4.992] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 4.992] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 4.992] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4.992] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 4.992] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 4.992] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 4.992] (II) Loading sub module "fb"
    [ 4.992] (II) LoadModule: "fb"
    [ 4.992] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 5.023] (II) Module fb: vendor="X.Org Foundation"
    [ 5.023] compiled for 1.14.1, module version = 1.0.0
    [ 5.023] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.023] (II) Loading sub module "exa"
    [ 5.023] (II) LoadModule: "exa"
    [ 5.023] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 5.025] (II) Module exa: vendor="X.Org Foundation"
    [ 5.026] compiled for 1.14.1, module version = 2.6.0
    [ 5.026] ABI class: X.Org Video Driver, version 14.1
    [ 5.026] (II) Loading sub module "shadowfb"
    [ 5.026] (II) LoadModule: "shadowfb"
    [ 5.026] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 5.029] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 5.029] compiled for 1.14.1, module version = 1.0.0
    [ 5.029] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.029] (II) Loading sub module "dri"
    [ 5.029] (II) LoadModule: "dri"
    [ 5.029] (II) Module "dri" already built-in
    [ 5.029] (II) NOUVEAU(G0): Loaded DRI module
    [ 5.029] (--) NOUVEAU(G0): Chipset: "NVIDIA NVa8"
    [ 5.029] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 5.029] (==) NOUVEAU(G0): RGB weight 888
    [ 5.029] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 5.029] (==) NOUVEAU(G0): Using HW cursor
    [ 5.029] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 5.029] (==) NOUVEAU(G0): Page flipping enabled
    [ 5.029] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 5.060] (II) NOUVEAU(G0): Output DVI-I-1 has no monitor section
    [ 5.068] (II) NOUVEAU(G0): Output HDMI-1 has no monitor section
    [ 5.178] (II) NOUVEAU(G0): Output VGA-2 has no monitor section
    [ 5.189] (II) NOUVEAU(G0): EDID for output DVI-I-1
    [ 5.196] (II) NOUVEAU(G0): EDID for output HDMI-1
    [ 5.249] (II) NOUVEAU(G0): EDID for output VGA-2
    [ 5.249] (II) NOUVEAU(G0): Manufacturer: DEL Model: a00c Serial#: 808793676
    [ 5.249] (II) NOUVEAU(G0): Year: 2004 Week: 47
    [ 5.249] (II) NOUVEAU(G0): EDID Version: 1.3
    [ 5.249] (II) NOUVEAU(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 5.249] (II) NOUVEAU(G0): Sync: Separate
    [ 5.249] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 30 vert.: 23
    [ 5.249] (II) NOUVEAU(G0): Gamma: 2.20
    [ 5.249] (II) NOUVEAU(G0): DPMS capabilities: Off; RGB/Color Display
    [ 5.249] (II) NOUVEAU(G0): Default color space is primary color space
    [ 5.249] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 5.249] (II) NOUVEAU(G0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582
    [ 5.249] (II) NOUVEAU(G0): blueX: 0.149 blueY: 0.088 whiteX: 0.312 whiteY: 0.328
    [ 5.249] (II) NOUVEAU(G0): Supported established timings:
    [ 5.249] (II) NOUVEAU(G0): 720x400@70Hz
    [ 5.249] (II) NOUVEAU(G0): 640x480@60Hz
    [ 5.249] (II) NOUVEAU(G0): 640x480@72Hz
    [ 5.249] (II) NOUVEAU(G0): 640x480@75Hz
    [ 5.249] (II) NOUVEAU(G0): 800x600@56Hz
    [ 5.249] (II) NOUVEAU(G0): 800x600@60Hz
    [ 5.249] (II) NOUVEAU(G0): 800x600@72Hz
    [ 5.249] (II) NOUVEAU(G0): 800x600@75Hz
    [ 5.249] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 5.249] (II) NOUVEAU(G0): 1024x768@70Hz
    [ 5.249] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 5.249] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 5.249] (II) NOUVEAU(G0): Supported detailed timing:
    [ 5.249] (II) NOUVEAU(G0): clock: 65.0 MHz Image Size: 304 x 228 mm
    [ 5.249] (II) NOUVEAU(G0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
    [ 5.249] (II) NOUVEAU(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
    [ 5.249] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
    [ 5.249] (II) NOUVEAU(G0): Serial No: D82544BF056L
    [ 5.249] (II) NOUVEAU(G0): Monitor name: DELL E153FP
    [ 5.249] (II) NOUVEAU(G0): EDID (in hex):
    [ 5.249] (II) NOUVEAU(G0): 00ffffffffffff0010ac0ca04c363530
    [ 5.253] (II) NOUVEAU(G0): 2f0e0103681e17782eb060a1584f9526
    [ 5.253] (II) NOUVEAU(G0): 165054afce0001010101010101010101
    [ 5.253] (II) NOUVEAU(G0): 01010101010164190040410026301888
    [ 5.253] (II) NOUVEAU(G0): 360030e410000018000000fd00384c1e
    [ 5.253] (II) NOUVEAU(G0): 3f08000a202020202020000000ff0044
    [ 5.253] (II) NOUVEAU(G0): 383235343442463035364c0a000000fc
    [ 5.253] (II) NOUVEAU(G0): 0044454c4c204531353346500a200025
    [ 5.253] (II) NOUVEAU(G0): Printing probed modes for output VGA-2
    [ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
    [ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 5.253] (II) NOUVEAU(G0): Output DVI-I-1 disconnected
    [ 5.253] (II) NOUVEAU(G0): Output HDMI-1 disconnected
    [ 5.253] (II) NOUVEAU(G0): Output VGA-2 connected
    [ 5.253] (II) NOUVEAU(G0): Using exact sizes for initial modes
    [ 5.253] (II) NOUVEAU(G0): Output VGA-2 using initial mode 1024x768
    [ 5.253] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 5.253] (--) NOUVEAU(G0): Virtual size is 1440x900 (pitch 0)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 5.253] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 5.254] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 5.254] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 5.254] (II) Loading sub module "fb"
    [ 5.254] (II) LoadModule: "fb"
    [ 5.254] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 5.254] (II) Module fb: vendor="X.Org Foundation"
    [ 5.254] compiled for 1.14.1, module version = 1.0.0
    [ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.254] (II) Loading sub module "exa"
    [ 5.254] (II) LoadModule: "exa"
    [ 5.254] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 5.254] (II) Module exa: vendor="X.Org Foundation"
    [ 5.254] compiled for 1.14.1, module version = 2.6.0
    [ 5.254] ABI class: X.Org Video Driver, version 14.1
    [ 5.254] (II) Loading sub module "shadowfb"
    [ 5.254] (II) LoadModule: "shadowfb"
    [ 5.254] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 5.254] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 5.254] compiled for 1.14.1, module version = 1.0.0
    [ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.254] (II) UnloadModule: "vesa"
    [ 5.254] (II) Unloading vesa
    [ 5.254] (--) Depth 24 pixmap format is 32 bpp
    [ 5.255] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 5.261] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 5.261] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 5.261] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 5.266] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 5.266] (II) EXA(256): Driver registered support for the following operations:
    [ 5.266] (II) Solid
    [ 5.266] (II) Copy
    [ 5.266] (II) Composite (RENDER acceleration)
    [ 5.266] (II) UploadToScreen
    [ 5.266] (II) DownloadFromScreen
    [ 5.266] (==) NOUVEAU(G0): Backing store disabled
    [ 5.266] (==) NOUVEAU(G0): Silken mouse enabled
    [ 5.267] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 5.267] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 5.267] (==) NOUVEAU(G0): DPMS enabled
    [ 5.267] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 5.269] (II) NOUVEAU(0): Opened GPU channel 0
    [ 5.273] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 5.273] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 5.273] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 5.276] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 5.276] (II) EXA(0): Driver registered support for the following operations:
    [ 5.276] (II) Solid
    [ 5.277] (II) Copy
    [ 5.277] (II) Composite (RENDER acceleration)
    [ 5.277] (II) UploadToScreen
    [ 5.277] (II) DownloadFromScreen
    [ 5.277] (==) NOUVEAU(0): Backing store disabled
    [ 5.277] (==) NOUVEAU(0): Silken mouse enabled
    [ 5.277] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
    [ 5.277] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 5.277] (==) NOUVEAU(0): DPMS enabled
    [ 5.277] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 5.277] (--) RandR disabled
    [ 5.444] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 5.444] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 5.444] (II) AIGLX: enabled GLX_ARB_create_context
    [ 5.444] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 5.445] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 5.445] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 5.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 5.447] (II) AIGLX: Loaded and initialized nouveau
    [ 5.447] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 5.456] (II) NOUVEAU(0): NVEnterVT is called.
    [ 5.457] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
    [ 5.457] resize called 1440 900
    [ 5.688] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 5.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 5.688] (II) LoadModule: "evdev"
    [ 5.688] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 5.690] (II) Module evdev: vendor="X.Org Foundation"
    [ 5.690] compiled for 1.14.0, module version = 2.8.0
    [ 5.690] Module class: X.Org XInput Driver
    [ 5.690] ABI class: X.Org XInput driver, version 19.1
    [ 5.690] (II) Using input driver 'evdev' for 'Power Button'
    [ 5.690] (**) Power Button: always reports core events
    [ 5.690] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 5.690] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 5.690] (--) evdev: Power Button: Found keys
    [ 5.690] (II) evdev: Power Button: Configuring as keyboard
    [ 5.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 5.690] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 5.690] (**) Option "xkb_rules" "evdev"
    [ 5.690] (**) Option "xkb_model" "evdev"
    [ 5.690] (**) Option "xkb_layout" "us"
    [ 5.771] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 5.771] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 5.771] (II) Using input driver 'evdev' for 'Power Button'
    [ 5.771] (**) Power Button: always reports core events
    [ 5.771] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 5.771] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 5.771] (--) evdev: Power Button: Found keys
    [ 5.771] (II) evdev: Power Button: Configuring as keyboard
    [ 5.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [ 5.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 5.771] (**) Option "xkb_rules" "evdev"
    [ 5.771] (**) Option "xkb_model" "evdev"
    [ 5.771] (**) Option "xkb_layout" "us"
    [ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event2)
    [ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
    [ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
    [ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event2"
    [ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
    [ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
    [ 5.772] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
    [ 5.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2/event2"
    [ 5.772] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 8)
    [ 5.772] (**) Option "xkb_rules" "evdev"
    [ 5.772] (**) Option "xkb_model" "evdev"
    [ 5.772] (**) Option "xkb_layout" "us"
    [ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event3)
    [ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
    [ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
    [ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event3"
    [ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
    [ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found 1 mouse buttons
    [ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found scroll wheel(s)
    [ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found relative axes
    [ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing relative x/y axes to exist.
    [ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found absolute axes
    [ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing absolute x/y axes to exist.
    [ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
    [ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as mouse
    [ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
    [ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Adding scrollwheel support
    [ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 5.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3/event3"
    [ 5.773] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 9)
    [ 5.773] (**) Option "xkb_rules" "evdev"
    [ 5.773] (**) Option "xkb_model" "evdev"
    [ 5.773] (**) Option "xkb_layout" "us"
    [ 5.776] (II) evdev: Lite-On Technology Corp. USB Keyboard: initialized for relative axes.
    [ 5.776] (WW) evdev: Lite-On Technology Corp. USB Keyboard: ignoring absolute axes.
    [ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) keeping acceleration scheme 1
    [ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration profile 0
    [ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration factor: 2.000
    [ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration threshold: 4
    [ 5.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
    [ 5.777] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 5.777] (II) Using input driver 'evdev' for 'USB Optical Mouse'
    [ 5.777] (**) USB Optical Mouse: always reports core events
    [ 5.777] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
    [ 5.777] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d20
    [ 5.777] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
    [ 5.777] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
    [ 5.777] (--) evdev: USB Optical Mouse: Found relative axes
    [ 5.777] (--) evdev: USB Optical Mouse: Found x and y relative axes
    [ 5.777] (II) evdev: USB Optical Mouse: Configuring as mouse
    [ 5.777] (II) evdev: USB Optical Mouse: Adding scrollwheel support
    [ 5.777] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 5.777] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 5.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4/event4"
    [ 5.777] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
    [ 5.777] (II) evdev: USB Optical Mouse: initialized for relative axes.
    [ 5.778] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 5.778] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 5.778] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 5.778] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 5.778] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 5.778] (II) No input driver specified, ignoring this device.
    [ 5.778] (II) This device may have been added with another device file.
    [ 5.778] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 5.778] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 5.779] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 5.779] (II) No input driver specified, ignoring this device.
    [ 5.779] (II) This device may have been added with another device file.
    [ 7.250] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 7.250] (II) No input driver specified, ignoring this device.
    [ 7.250] (II) This device may have been added with another device file.
    [ 7.252] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
    [ 7.252] (II) No input driver specified, ignoring this device.
    [ 7.252] (II) This device may have been added with another device file.
    [ 7.254] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event8)
    [ 7.254] (II) No input driver specified, ignoring this device.
    [ 7.254] (II) This device may have been added with another device file.
    [ 7.256] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
    [ 7.256] (II) No input driver specified, ignoring this device.
    [ 7.256] (II) This device may have been added with another device file.
    [ 7.258] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event10)
    [ 7.258] (II) No input driver specified, ignoring this device.
    [ 7.258] (II) This device may have been added with another device file.
    [ 7.260] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event11)
    [ 7.260] (II) No input driver specified, ignoring this device.
    [ 7.260] (II) This device may have been added with another device file.
    [ 7.270] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
    [ 7.270] (II) No input driver specified, ignoring this device.
    [ 7.270] (II) This device may have been added with another device file.
    [ 7.272] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
    [ 7.272] (II) No input driver specified, ignoring this device.
    [ 7.272] (II) This device may have been added with another device file.
    [ 7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
    [ 7.274] (II) No input driver specified, ignoring this device.
    [ 7.274] (II) This device may have been added with another device file.
    [ 7.289] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
    [ 7.289] (II) No input driver specified, ignoring this device.
    [ 7.289] (II) This device may have been added with another device file.
    [ 16.144] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
    [ 16.144] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 16.144] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 16.144] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
    [ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
    [ 16.979] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
    [ 16.979] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 16.979] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 16.979] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
    [ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 16.979] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 16.982] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
    [ 16.984] resize called 1440 900

  • MSI Z77 MPower - Disabled integrated video, but it keeps coming back

    I have a brand new Z77 MPower board paired with an i7 3770K CPU.  I am running the most recent BIOS.  In BIOS, I have "Virtu Technology" set to "Disabled" and "Initiate Graphic Adapter" is set to "PEG".  As I understand it, this should cause my computer to only use the discrete card (which is an XFX HD 7870, by the way).  This is all good and fine, and it generally works as it's supposed to. 
    However, every once in a while (maybe every 3rd or 4th boot into Windows), something strange happens:  the 3770K's onboard video (Intel HD 4000) shows up in device manager as "Standard VGA adapter", and Windows Update wants to install an updated driver for Intel HD 4000.  If I install the driver, I get a black screen, and I cannot get Windows to properly boot unless I boot into Safe Mode and remove the Intel driver with a utility like Driver Sweeper or Display Driver Remover.  I have the "Standard VGA Adapter" disabled in Device Manager, but Windows Update still wants to update the driver.  It is very annoying, and I've never had a board that didn't respect the BIOS setting to disable onboard video.  What is going on here?  Is there something that I'm overlooking in the BIOS?
    I suppose that I could deal with it if the stupid Intel driver didn't cause my system to lock up.  I guess an acceptable workaround would be to find a working driver for that, but what I really want is for the onboard video to stop showing up in Device Manager.  Any ideas?

    Quote from: flobelix on 01-June-13, 23:13:54
    Never heard of a Z77 MPower reporting false temps. Could be cooler is somehow wedged on the cpu and is not fully in contact with the heatspreader. Try reseating it.
    Fast reply for a Saturday morning, thanks!
    I did Google it and couldn't find anyone else reporting bad temperatures, so I'm going to assume maybe I've made a mistake. (none of us are above failure!) Been talking to some other computer builder friends on Facebook and everyone is pretty much in agreement that I should reseat the heatsink, I'm also going to use the Zalman paste, though.
    Could I also bother you and ask if you know if less USB ports are enabled since I'm using a 2nd gen Intel Core CPU and not a 3rd gen? I know the PCI-E lanes are less because of it, but I'm not sure if USB would be included or not, going to try and find that in the manual, hopefully it will say something.
    As of right now though, it looks like only 4 total USB ports are available, 2x USB 3.0 ports on the back, and the 2 front USB 2.0 ports I plugged into the high powered header on the bottom of the board. The 2 gaming port USB 2.0 ports don't even work. =/

  • Km4mv onboard video disable

    When using an AGP graphics card with a KM4MV mainboard is there some way that the onboard video should be disabled?
    I have had a look in the bios but can't see anything obvious.

    ^^ what he says. onboard video shares the same bus as the AGP slot, so as soon as you plug in an AGP card, the onboard is disabled

  • How do I Disable KM3M-V onboard video?!?!?!

    Just rebuilt the wifes system with a KM3M-V mobo. Plug her ABIT Otes ti-4200 in and I cannot get a signal to come out of it. The only video that works is the onboard. How do I disable the onboard video?
    BTW the manual for this board is like 7 pages long, terrible terrible support for this board so far. Thanks in advance for any help you guys can offer.
    G

    After owning an MSI KM133A PRO (MS-6340 V5), Biostar M7VIG Pro, MSI KM2M Combo-L (still have it), Soyo K7VME and P4VGM over the last couple years, all of which were tested with integrated graphics and AGP video cards, these things can be fickle!
    I would recommend clearing the CMOS using the jumper and try booting again.  That always worked for me.
    If you get a display from the AGP card, enter BIOS and disable everything pertaining to the integrated video (if present).  Some BIOS utilities automatically hide integrated VGA options when an AGP card is detected.  Most recent boards have no option to disable integrated VGA in BIOS because it is automatically disabled when an AGP card is detected, though VGA memory share may still be present.
    Also, reseat the AGP card and to make sure its all the way down.

  • Z87 G45 Onboard Video

    Hi.
    Recently I got a system with z87 g45 mainboard, xfx r9 290 graphics card.
    When enabling onboard video, and installing VirtuMVP everything seemed fine.
    Played a few games and noticed it was giving more of a performance hit then boosting it.
    Updated drivers, still the same. Plugged in other monitor to onboard to see if it was working and second desktop displayed fine.
    Restarted, checked bios, unplugged second monitor. And then VirtuMVP failed to load, saying gpu not configured.
    Rebooted few times, checked device manager, everything looked fine. Plugged in other monitor 'no signal'
    tried disabling, uninstalling drivers. redoing. yet still getting 'no signal' when I go to check it (and VirtuMVP won't load)
    Even tried monitor that is plugged into r9 290. Nothing on either DVI or HDMI. Just no signal (tho it detects that it's plugged in)
    Updated bios. No vga drivers listed in live update, any idea why this is happening?
    B

    Well it's still playing a subtle level through the fronts, it's tolerable for most music, but you can play anything like dubstep or anything with heavy bass, hopefully they will find a fix for this.

  • K8D master ft onboard video problem

    Hi, I have the k8d master ft and when I install a pci vid card the onboard video is disabled. Does anyone know how or even if it is possible to run both? I could not find anything in bios but maybe I missed it.
    thanks.

    Sorry, you can't....this happens on all boards that I have seen.

  • Km2m onboard video

    Hi I have a KM2M Combo motherboard and want to use my new pci video card. Do I need to do anything in the bios to enable it? also do I need to uninstall any exisiting drivers and if so were would I find them to unstall the onboard video drivers?

    I've posted this before and I have this motherboard...this is how you disable on-board video...
    In BIOS in "advances chipset features" > "agp and pgp bridge control" > "vga share memory size" from there you can set the amount of system memory to share or disable it.
    Good Luck, Tom

Maybe you are looking for