Disabling RDP Compression on Windows Server 2012 R2

Hi
On Windows 2008 R2, we could disable RDP compression via GPO by configuring "Do not use an RDP compression algorithm" in the following GPO
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Set compression algorithm for RDP data
It seems like with the Windows Server 2012 R2 GPO's, this setting is no longer available? How do we disable RDP compression so that we can use it with Riverbed products?
Thanks

Hi,
How is the issue going now? Is there any update?
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

  • How to RDP access my Windows server 2012 system with Windows 7 system

    In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
    1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
    2. Disabled the firewall in Windows server 2012.
    Can someone advice me on the below.
    1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

    Hi,
    Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
    Create a incoming UDP rule on firewall to allow port 3389 and give a try.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Does ASA rdp Plugin supports windows server 2012?

    HI,
    I am using rdp plugin for ssl vpn, it is working fine for windows server 2003 but same plugin is not working for server 2012.
    Can you please tell me does it supports or not. Is there any changes we need to do at server side?

    Hi Guna,
    There is an enhancement request opened for supporting RDP plugins on Windows server 2012.
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuh27112
    So as of now your only options is to use Anyconnect client or Smart tunnel.
    HTH

  • System sound delay RDP session with Windows server 2012 R2 standard

    I have the following problem during a RDP session with a Microsoft Terminal Server 2012 R2 standard:
    when i produce a system sound, the delay could be up to 15 seconds before I hear the cound on the client side.
    making immediately a second system sound, the delay is minimal,
    When i wait about 10 minutes, the delay could be again 5-15 seconds.
    This problem occurs both with Windows 7 and Motorola Scanners
    I also noticed that after making a sound on the first device, there is also no delay when making immediately a sound on a second RPD session.
    I tried different settings for audioqualitymode or audiocapturemode, no luck
    henk

    Hi Henk,
    As the way I see it, it’s a poor performance behavior of RDP.
    You may try to update sound driver and fully patch systems to see whether performance can be improved.
    “RDP was originally designed to flush the video frame buffer to the client about once every 100 milliseconds.  While this is fine for most Windows GDI applications, graphic intensive applications, 3D applications and applications requiring audio
    / video synchronization don’t fare so well.  With respect to streaming media in particular, RDP is only meant to cache the bitmap files (compressed) not the audio which is uncompressed over the wire”, quoted from the article below:
    Terminal Services and Graphically Intensive Applications
    http://blogs.technet.com/b/askperf/archive/2009/04/17/terminal-services-and-graphically-intensive-applications.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • How to install RDP CALs pack on Windows Server 2012 R2 (member of NT domain)

    OS: Windows Server 2012R2 (64-bit), member of NT (Samba 3) domain.
    Task: install RDP CAL pack, to allow connecting above its default 3 sessions limit.
    Problem: when setting up RDP licensing/other required service, I came to a problem: RDP access broker service requires AD type of domain to be installed.
    The server is part of NT (Samba 3) domain and we have no intention to change domain type only to satisfy an auxiliary service.
    Is it possible to enable additional RDP CALs on Windows Server 2012 R2 without mandatory joining an AD? The license control available up to Windows Server 2008 has been removed from Windows Server 2012, I can't bypass installing broker and the rest of related
    services.
    Thank you for any information.

    Hi,
    you might find the dedicated TS/RDS forum is better suited to your question:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverTS
    Some related information which may be helpful:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/cbffb2d4-ff9d-49ee-a9ce-a60db2262422/managing-server-2012-rds-in-a-workgroup?forum=winserverTS
    http://support.microsoft.com/kb/2833839/en-au
    http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Can't print a pdf file with adobe reader 10.1.12 on a Windows Server 2012 R2 RDS session

    Situation : My users are connected with RDP on a Windows Server 2012 R2 Datacenter Remote Desktop Service and when they log on, their share printers are installed.
    When some users open a pdf file, they can't print it. When they try to print a file, nothing happen... No file sent to the printer...
    I have seen a difference between the shortcut icon of adobe reader for users who have this problem and others.
    No Problem :
    Problem :
    If someone can help me
    Thanks !

    Hi Ajlan,
    To fix my problem, i uninstalled adobe reader X with "Adobe Reader and Adobe Acrobat Cleaner Tool", rebooted the server, installed Adobe Reader XI and rebooted again.
    For some users, this fix the problem but with some others i had to define Adobe Reader by default again.
    I tried without use "Adobe Reader and Adobe Acrobat Cleaner Tool" before and adobe reader X wasn't really uninstall.
    Thanks,
    Regards,
    Sullyly

  • Unable to Connect to SQL 2000 Instance from Windows Server 2012 environment

    We have a windows server (TEST) 2012 environment , where our test SQL Server 2012 instance is hosted.
    We have a different (DEV) Server (windows 2000)  where a SQL Server 2000 instance is present.
    When I RDP to our Windows Server 2012 box, I cannot connect to the SQL 2000 server instance from SQL Management Studio. (whereas I can connect to
    the same server from my local machine which has windows 7 and SQL 2012 installed). 
    This is the error i see - 
    "A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name
    is no longer available.) (.Net SqlClient Data Provider)"
    When run from SQL Agent Service from TEST (A Job which tries to connect to that SQL 2000 instance to read some data using SSIS) , we get the following
    error - 
    An OLE DB record is available.  Source: "Microsoft OLE DB Provider for SQL Server"  Hresult: 0x80004005  Description: "[DBNETLIB][ConnectionRead
    (recv()).]General network error. Check your network documentation.".
    The same SSIS package runs successfully from my local machine.
    Please, could someone advice how to resolve this situation?

    Thanks Olaf.
    Its just that we have legacy systems here in our company, who, for some reason haven't upgraded their older infrastructure, whereas they have set up new Windows 2012/SQL 2012 environments for the newer sql instances where they want to transition to !
    Not sure what the solution is honestly. It is affecting our timelines now. The infrastructure team needs to take a decision now, as to what to do.
    I do have to add, we were able to connect to these "older" servers from our Windows 7 client machines which have SQL 2012 - both from SQL management studio & SSIS (using OLE-DB Provider for SQL Server).

  • Black Screen on a RDP Session on a Windows 8 VM (with a RemoteFX 3D Card) running on Windows Server 2012 HyperV

    Hi,
    I am trying to test a Windows 8 VM (RTM) with a RemoteFX 3D adapter (I used Powershell command to add the RemoteFX adapter to the VM) and when I connect the machine with the RDP Client (Windows Server 2012 RTM),
    I just get a black screen.
    Off course, I can not connect using VM Connect (because RemoteFX is enable in the VM).
    I tested same configuration but this time with a Windows 7 VM and this time it's OK, RemoteFX working fine.
    Any Idea will be apreciated :-)
    Stanislas Quastana, Microsoft France http://blogs.technet.com/stanislas

    I may have a solution for this which I am about to test.
    My environment is 2012R2, Win8.1 VDI Machines on a Dell R720 with Nvidia GRID K2.
    I've been trying to rollout VDI all week with everything working except RemoteFX.
    On logon the screen is just black but if you press enter it continues to log on, it appears that the logon message text may be causing the issue so I have created a GPO for my template machines and client machines which disables require CTRL+ALT+DEL
    and also deletes from the registry the logon message and logon text entries that are displayed on all machines, I figure the users will see this when logging onto their ThinPC machine before connecting to VDI so it's not needed twice.
    CONFIRMED working!!

  • On Windows Server 2012 R2 the option "Show my desktop background on Start" is disabled

    Since this thread is
    inactive, I am starting a new one.
    On windows server 2012 R2, under the taskbar properties, the option to display desktop background on start is disabled and I have not found a way to enable the same.
    Please suggest, how this can be enabled.
    With regards

    You should take a look at this thread. They still haven't figured it out yet though, I don't believe it is possible at the moment on server 2012 even with desktop experience installed.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9e26b0d5-e586-45b6-91bf-540a72dd36fc/on-windows-server-2012-r2-the-show-my-desktop-background-on-start-is-grayed-out?forum=winservergen
    http://WrinkleFreeIT.com/

  • Serial Port communication very slow in RDP on windows server 2012

    Hellò, we have installed a new server 2012 and connected some thinclients via RDP, since that moment all peripherals connected to the imported com ports of the thinclients are running very slow, for example the cash register issue any receipt only after
    15-20 seconds!!. We have try to connect via RDP also a personal computer with many other OS like windows 8, windows 7, or XP but the result is the same: 15-20 seconds for a receipt!! We solve the problem only changing the server 2012 with a old server
    2008 or 2003!. How is possible window server 2012 is so slow on RDP imported com ports??. There is something to set for speed up the com ports on rdp? For us this is a great problem, all of our customers are using cash register via RDP and they can't wait
    all this time for a receipt. For your information we have tried to connect the cash register to the same com port of the same thinclient to the same server 2012 without RDP and the issue of the receipt is fast, so the problem is something on RDC of the new
    OS windows Server 2012. Also note this is a bi-directional communication because the cash register use a bi-directional communication for printing each one of the voice on the receipt, this problem wll not affect other printers unidirectional where the
    print process starting in less one second. Please help us to solve this problem, otherwise we will not more install windows server 2012.

    Hi,
    Thanks for your posting in Windows Server Forum.
    When the slow performance issue occurs on server 2012, check the Windows Logs – Application category of the Event Viewer (eventvwr.msc) on both the client and server sides. If there is any logs recorded, please let us know them. Please also check the
    driver is properly installed on server and check the compability guide with the cash register machine, whether it support server 2012 with remote session. If there is particular requirement then you need to solve them first.
    In addition, would like you to try connecting with RDP 8.1 and check whether it faces same issue.
    Remote Desktop Protocol 8.1 Update for Windows 7 SP1 released to web
    Hope it helps!
    Thanks,
    Dharmesh

  • Single server solution for RDS / TS / RDP using Windows Server 2012 R2

    Planning on setting up a small single server and  need this functionality:
    * 3 local users runnnig Windows 7 Home Premium needs to access files on the server
    * The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an application on the server. (Session-Based Remote Desktop).
    We want to use Windows Server 2012, and found out that Essentials does not support RDP, so that leaves Foundation and Standard versions.
    However, I also found out that in WS 2012 the RDP can not be on the same server as the Domain Controller, and we therefor needs to run 2 server instances on our hardware. I think this starts to look way to complicated for what we want to do, but found out
    that WS 2012 R2 allows a single server to run RDP (See TechNet article 2833839).
    So we will go for Windows Server 2012 R2, either Foundation or Standard to set up our RDP.
    So now the question: Will that solution work with our local machines running Windows 7 Home Premium, as they cannot connect to a domain? Can we set up some kind of simple file share or Workgroup to acces files locally while still keeping the RDP
    functionality on the server?
    And, will WS 2012 Foundation R2 do this as well as WS 2012 Standard R2?
    (I have been asking several locat MS representatives to find a solution to our needs, but no one seems to know how this works....of cause we could just get 2 WS 2012 Standard server instances, run one as DC and on as RDCB and upgrade all our clients to Win
    7 Pro, but we would like a solution with minimal investment in time and money)
    Rgds
    Petter

    Hi Ryan, 
    and thanks for the answer! I do not know how to do "multiple quote" in this forum so I do it this way:
    "have you considered virtualisation, as you can run multiple virtual machines under one licence. I think this would be the cheapest and most efficient use of your money. Upgrading your clients to Windows 7 pro would allow you to have domain control
    Single Sign On SSO. "
    This is the "official" solution I think: Upgrade all clients to Win 7 Pro and run two instances of Win Server 2012 Standard on the server.
    However, I was hoping to get away with something a bit more Quick & Dirty.....;-) We do not have big security issues and will have a good backup system, and I think for 3 users only, it will be more work trying to centralise administration like updating,
    backups etc, than to just go to each machine and do what is needed. 
    We are good with computers/Windows but have no Server experience. A server guy will help us get started, but I dont want him around after that, so it must be a very simple solution.
    Also, installing 2 instances of WS 2012 and upgrading all 3 clients to Win Pro, and then installing all software and settings on the clients into the new domain user accounts on these clients is quite a lot of work. So I was hoping to keep only existing local
    users on the client machines and only have some kind of file share thing going on with the server disks that we need to access. So perhaps use a Workgroup instead of a domain, if that works with the RDS setup?
    "Option 1
    2 virtual machines 1x DC and 1x RDS server."
    So, if we set up RDS this way (so we can log in remote and run our application session-based on the server), can we keep the local clients running Windows Home Premium using our current local user logins (ie no domain user accounts created on the client machines,
    as this is impossible in Home versions) and still access the server disks somehow, or is it impossible? 
    Another question is if it is stupid/a really bad solution...but I still want to know if it is possible....;-)
    "Option 2 
    2 virtual machines 1x DC and 1x RDS server.
    You can configure your RDS solution as a domain joined platform and will still be able to access resources from the local device as you can map local drives to the session host. http://www.serverintellect.com/support/techfaq/drive-rdp/
    Your users would have two sets of credentials, one for the local client and one for the domain."
    I do not want to access files over VPN or RDP, we only want to run an application on the server from remote (Session-Based Remote Desktop). However when we use the local clients we want to access files on the server, and then we access huge image and film files
    on fast RAID drives, so local network speed must be top speed. Also if possible we would like to not upgrade to Win Pro, and then joining a domain is not possible.
    "Option 3
    1x Server
    The second option would be to manually deploy the session host role and licencing role to a work group server. This would limit access to RDP only and you would loose web access functionality."
    I think this is what I was hoping for. It seems that the new R2 release of WS 2012 allows you to rund RDP and Domain Controller roles on the SAME instance of the server. That sounds nice, it limits what we need to keep track on and minimises the load on the
    server that needs to act as a very fast file server locally.
    However, can we do this and still keep file acces with only Windows Home (no domain) in the local clients (same question as above under "Option 1")?
    Rgds
    Petter

  • Requirement to enable more than two concurrent RDP sessions on multiple Windows Server 2012

    I have an existing Remote desktop licensing server, which has users CALs for server 2008. Now I have some windows server 2012 R2, where more than 2 concurrent RDP connections are required.
    What I understand that I will need to install RDS server roes on all my Widows Server 2012 and I will need to have at least one RD licensing server to install RDS CALS, that’s all.
    If it is correct, the questions is : Can I use my existing license server to add my newly purchased version 2012 RDS user CALs or I will need a new licensing server?
    If it is not correct, then what else I need
    I appreciate your detail step by step
    Thanks

    Thanks the for steps, provided,
    So in short,
    I will need a Windows 2012 Server to install RSD 2012 licencing server to setup my newly purchased X number of RDS 2012 user CALs.
    As I just want more than 2 concurrent RDP connection to happen on some Windows 2012 server, I will require to select “Role-Based or feature-based installation and ONLY will enable Remote Desktop Licensing Role and Demote Desktop Session
    Host.
    I will need to add RD Licencing and add the server 2012 servers; I want more than 2 concurrent connections to happen.
    I will need to enable RD Licensing mode as per user
    Question:
    1. What I need to enable on those servers, where I want concurrent RPD connection to happen
    2. In which stage and where I will enable my users CALs, I purchased?
    3. Do I have to install RD Session Host role service on the servers, where more than two RPD users will connect at the same time?
    I am also in dark, how my user will connect those servers, with RDP connection or with  RD Web Access.
    All I want to do is to enable more then 2 concurrent connection to some Windows Server 2012 R2. I have already purchased some RDS 2012 R2 Users CAL

  • Windows Server 2012 R2 RDP access too slow when user access

    HI Team,
    Recently installed Windows Server 2012 R2 Standard edition .
    The above server also promoted as Domain controller.
    I am trying to access the server VIA RDP from Windows 8 client machine access is toll slow and welcome screen shows for 2 to 3 minutes then only i can able to see my server desktop.
    Please advise me.

    We have two applications published on Rdweb.
    1.       MS
    Paint
    2.       Remote
    Desktop with option /v: <fqdn of the terminal server itself>
    MS Paint – can see local drives when logged on to the paint application
    Remote Desktop with parameters /v: <fqdn of the terminal server itself> - cannot see local drives when logged onto the full desktop view
    Mahesh

  • Office 2013 over Windows Server 2012 RDP World Add-On Macro/Template Error

    I have a new Windows Server 2012 Remote Desktop environment for about ten users (not R2) with the latest Office 2013 Pro installed.
    The users all have an add-on word template in Word for Office 2013.  That add-on was installed as administrator and ONLY works as administrator.
    When any other user (even if they are local administrators, domain admins, etc.) opens Word, they are immediately prompted with the following message:
    "Could not load some objects because they are not available on this machine."
    If a user "runs as administrator" it runs fine.  Obviously, I don't want that.  I have been searching and searching and thought maybe there was a group policy or Office setting someone may know that I just can't find.
    Any help would be awesome!  Thank you.

    Hi,
    Once you login with the user account which is not getting access, try the below steps and check if it helps fix the issue: 
    Click on start->control panel->programs and features->right click on the Office 2013 program->click on change->add or remove features-> click on the drop down arrow which is before the Microsoft Office->click on Run all from my computer->Continue.
    Once completed restart the computer and then open to check if the issue occurs.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • RDP License Windows 2008 R2 activate at Windows Server 2012 R2

    Hi,
    Is it possible to activate Remote Dekstop License Windows Server 2008 R2 at Windows Server 2012 R2?

    Hi,
    Thank you for your posting in Windows Server Forum.
    First please specify, are you talking for RDS CAL or RD License Server?
    As suggested by diramoh, if you want to have Server 2008 R2 RDS CAL for Server 2012 R2 then it can’t be possible. You need to have CAL version corresponds the software version it access. Newer version of RDS CAL (say server 2012 R2 can be used for Server 2008
    R2). Please check the below matrix for RDS CAL interoperability.
    RDS and TS CAL Interoperability Matrix
    http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

Maybe you are looking for

  • MOV files no longer play on my iPad after the IOS7 upgrades

    Prior to the recent IOS upgrade to 7, then 7.0.2, I was able to use my camera connection kit to import videos taken on my camera. They played without issue and I was able to share with friends from my iPad. Since the upgrades, the files will import t

  • Making OS Lion Install Disk *after* Installation

    I installed OS Lion and I want to create a boot up disk only for OS Lion in case if anything goes wrong later and I checked online, but its all before the installation. Any idea how to create boot up disk after OS Lion installation? Thanks a lot.

  • Delete row menu on sales line item matrix

    Can anyone tell me how I can tell which row is being deleting by the menu event for this delete row ( MENU ID 1293) I want to access the record on the menu event and check some fields but the user does not always have to have a row selected to use th

  • Illustrator crashes after startup before doing anything

    Illustrator crashes after startup before doing anything... Creating new or opening a file... I'm running Windows 7 Enterprise 64-bit and it is Illustrator v18 CC 2014. All other CC products seem to work fine.

  • ITines 9.2 will not allow sorting songs in playlists

    Using iTunes 9.2 and OS 10.5.8, none of the playlists allow sorting. That column has only the one arrow for reversing the alphabetic order of songs. I created a new user and the issue is the same. Shuttle is off for both users' settings. Using iTunes