Disappearing User Dictionary after 4.2 update.

Hello All,
Ever since updating my iPhone 4 to iOS 4.2, the option to edit my user dictionary has disappeared. As far as I know, its supposed to be under Settings->General->Keyboard->Edit User Dictionary. It is not.

Here's what worked for me: Connect iphone 3G to mac and launch iTunes. Click on "music" tab on iphone in iTunes, all the songs appear in iTunes...double click on a song to play it in iTunes directly from the iphone's memory. the phone displays a message: "hold on, rebuilding database, this may take a while", when database rebuilds, everything works normal and all my music and movies reappeared in the iphone.
An apple programmer probably forgot to make the database rebuild part of the update. But this procedure forced the rebuild and my songs were now recognized again on the iphone.
Voila!

Similar Messages

  • TS3899 Saved messages disappear from mailboxes after 'update'.

    Saved messages often disappear from mailboxes after an automatic 'update'. Why does that occur? If it's normal, how long are messages retained in a mailbox? Thanks

    Hi Milli,
    I think the problem is that Mail tries to download them in order & if it runs into one it can't it just stops, happens when a bad/malformed email is in the chain too.
    I think this may have cleared your problem though...
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • "Offive" in the user dictionary and I can't remove it even after reset the dictionary

    Hi all,
    I found that I have a word "Offive" in my user dictionary.
    I tried to remove it by resetting the keyboard / dictionary; however, the word "Offive" is still there immediately after I reset the dictionary.
    I searched for the word "Offive" in my contacts and calendars.  And, there are no such occurence.
    Interesting, the word "Offive" only appears in my iPhone; I have an iPad2, but the word "offive" isn't shown in the iPad at all.
    Do you know how iOS user dictionary added this word "Offive" automatically?
    When I typed "Offibe", iOS would automatically change it to "Offive" and then informed it's a misspell and I then changed it to "office" by clicking the word "Offive".  This is clumsy.
    Thanks,
    Ting Pong

    It wouldn't have been added automatically.  Words are added to the dictionary when you decline autocorrect suggestions.  You just have typed "offive" and then tapped the '"x" to decline the autocorrect suggestion "office" at some point, probably by mistake.

  • Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

    Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on and everything should copy back onto it.
    Working now !!!!!

  • Pictures in Scrolling Applet disappeared after Java 10 update.

    My home page on my website; [http://mrpitbull.com] has a scrolling applet
    that contains several pictures. After a Java update (10) a few months back, the
    pictures disappeared. Any computer that has not had the update, the pictures
    still appear. I rolled back the update on my system to 9 and got the pictures
    back. I figured that whatever problem I was experiencing, others would too,
    and a fix would be forthcoming. After a number of months, it is time to
    seek some help. Hopefully, someone is familiar with the issue and has a
    solution. Thanks! [http://mrpitbull.com/]

    Gimbal2,
    What would you call the scrolling text area on my home page that I am referring to? How could I better explain my problem? Is there a better or more targeted forum I should be in? Thanks.

  • After changing a mail list name in Server end, users can't see the update in outlook client

    Dear all,
    This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
    Does anyone know how to fix it?
    Thanks,
    Franklin hong

    Hi,
    Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
    If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • HELP! Lost User Folder After 10.4.7 Update

    HELP! Lost User Folder After 10.4.7 Update!!
    I did everything I normally do before an upgrade.
    Fix premissons, etc etc etc..
    Ran the combo updater & rebooted....
    Checking my HDD & noticed I lost
    my "jtmadman" folder in my User folder.
    Any ideas???
    Thanks
    eMac 1.25 ghz   Mac OS X (10.4.7)  

    Do you still have any of the normal user subfolders
    visible in the Finder sidebar, like "Movies" or
    "Pictures"?
    No, I don't. I can access it with A-dock.
    Is this an admin or regular account? How
    many user accounts on the Mac?
    Admin account, 1 user.
    How about login items? If you go to System
    Preferences -> Accounts -> Login Items tab, what is
    on the list?
    My login are:
    A-dock
    PrefsMenu
    Palm Desktop Background
    Fkey Listener
    LCCDaemon
    I noticed when I use thinkertool and
    click Show hidden & sys files, my
    "jtmadman" folder is there in my User folder.
    Why is it hidden??
    Thanks

  • Launch workflow in user form after updating attributes

    Hello,
    When I launch a workflow in my activeSync user form, attributes are not updated if there are changes for the account.
    I launch the worfklow as described below:
                    <Field name='viewOptions.Process'>
                        <Comments> Workflow</Comments>
                        <Expansion>
                            <s>DeleteAccounts</s>
                        </Expansion>
                    </Field>Is it possible in a first time to update attributes and then to launch the workflow ?
    Thanks,
    Nicolas

    Are the attributes changing because of changes through role assignments? I think those changes happen during check-in. (Maybe in a reprovision, too: I haven't tried.)
    My instructor said he has seen times after activeSync is run that, if you edit the user, additional attribute changes finally go through. He didn't elaborate on when it happens. I've seen it, but for reasons that aren't relevant in this discussions, I haven't had to deal with it yet.
    Anyway, he recommended setting viewOptions.Process to something that does an extra check-out/in (or in/out?) to handle that situation. You might want to add a check-in/out to your workflow before you do your other processing...

  • After today's updates, user/library has gone hidden as a system folder...huh?

    After today's updates, user/library folder has gone hidden as a system folder...is that normal? Tried repairing permissions, but still is hidden. Should I worry? thx!

    If you can't cope with the Option+Go method or need the Library during more complex operations, you can enter the following command into Terminal:
    chflags nohidden ~/Library

  • User-exit after updating PO from Order response ?

    Hi All,
    We are looking for a user-exit after the Purchase order is updated from an order response.
    With this user-exit we would like to trigger a WF to the user to carry out transaction YE22N, with the WF the user(PO creator) can execute and update the PO.
    Any feedback, tips would be helpfull and for sure points reward.
    Thanks & Regards,
    Nameeth

    Hi Anand,
    Sorry for the confusion., try to explain here.
    During the updation of PO from inbound ORDSP IDoc, we have a transaction YE22N to confirm if the changes in ORDSP is accepted or not.
    So we would like to automate this so that after the PO is update/saved from ORDSP IDoc, then we can trigger a workflow to send email to the PO creator.     
    If its still confusing then, "I would like to know if there is a user-exit or if Workflow can be triggered after updating PO" ?
    Regards,
    Nameeth

  • Finder disappears/not working after Yosemite update

    Anyone else having issues with their finder freezing, yet other apps continue to work? This started happening a lot after the Yosemite update, and never happened before! And when I go and relaunch the finder through "force quit" the folders on my desktop disappear. This would last about ten minutes before finder starts working again. And I started noticing it happens when I open Safari, could that be part of it?
    Anyone have a fix? or having the same issue?
    Kind of annoying considering the amount spent on a 'high end' computer....
    I have a mid-2012 macbook pro.
    Thanks!

    Run EtreCheck:  https://discussions.apple.com/docs/DOC-6173
    and post the results here.
    Best.

  • User dictionary disappeared?

    Ok.. ever since the ICS update I've "lost" a few things. I really desperately need to remove some of my mispelled words that the user dictionary saved but I CAN'T find it anymore. I've literally gone under every heading and subheading under the settings section with no avail. Am I missing something? :[ I feel like when the answer is pointed out to me, I'm going to feel completely face-palm ********... but... help? :]

    Go to the Settings page and scroll down to and click "Language & keyboard".
    Click the equalizer looking thing on the right side of "Touch Input"
    Then click on "Personal dictionary" at bottom of page.

  • Disks disappeared from Desktop after 10.5.4 - 10.5.8v1.1 update

    Hi,
    a strange think happend today after a server update from 10.5.4 to 10.5.8v1.1 with a downloaded combo installer: After the reboot 3 of 5 1 TB firewire disks disappeared from the desktop! Just gone. What makes the whole thing really tricky: they show up in the disk utilities as mounted! Repairing them doesn´t change a thing. Disk Warrior doesn´t help. What´s even more mysterious: Opening the terminal, cd to the /Volumes folder ls shows folders for all five disks. But "ls -l" produces an "Access denied" error for each of the missing disks! It requires a sudo to show the permissions of the disks! What´s more disturbing: The permissions of the disks not showing up are ending with an "+" while all the other disks have an "@". But what really knocks me of that you can mount and work with the missing disks over the network! I really need help with that.
    Greetings,
    Mike

    Hello mibobby,
    I'm seeing something similar to the problem you reported here. I my case there are 4 external hard drives connected to the Xserve 10.5.8. All drives are visible from Disk Utility, The Finder, and terminal. However, if a drive is plugged into another system, 10.5.8, or 10.6.2, the drives will not mount in the Finder. They appear in Disk Utility, but the volume appears as a blank piece of paper rather than a hard drive icon. If you navigate to the volume vial the terminal, you get an error indicating that you do not have permissions. Any thoughts would be appreciated.
    Did you ever get your problem resolved?
    Thanks
    Dean

  • TS1702 After doing an update on tribez everything has disappeared ...... Anyone else have the same problem??

    HAs anyone else had the same problem, after doing an update nothing will come up for tribez just a blank screen. My late nights are not the same now!!!

    Your Performance preferences screen capture reveals you have a single hard drive with little available space to accommodate both the Photoshop scratch file and the swap files of the OS.
    It's obvious that Bridge finds itself at times with insufficient space to build its cache.
    However, it's unclear why that should affect only DNG files and not other type of image files.  Puzzling, unless the DNG files are the only large image files you have.
    Parts of the following may illustrate what happens when the scratch file is on your boot drive:
    The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open.  I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
    As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS.  I also have 16 GB of RAM installed.
    Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

Maybe you are looking for

  • Question about Linksys G Wireless Router and i cant connect my iPod Touch and PSP to it.?

    I just got a new Wireless router and it works fine.The model number is WRT54G2. The internet is working and I can go on my xbox live and things like that. The only problem is that my iPod touch and things and my PSP can detect the connection but are

  • WDS between old and new AEBS

    First I want to apologize for this lenghty post. I want to provide as much useful info as possible. We just bought the new AEBS Dual Band and tried to add it to our existing WDS network and ran into a few serious snags. I really hope we can find help

  • Discoverer Viewer

    Navigating to a JSP page shows following error : The requested URL /discoverer/viewer was not found on this server. Need your suggestions to diagnose whats wrong. Regards

  • How to delete new, unwanted photo folders

    I just got the brand new itunes update and put some new photos on my iphone and now i have 2 new photo folders: photo library and the name of the folder from the computer i put on there. Both folders contain the 2 pictures i wanted to put on the phon

  • Freezing on iMac 2.66 GHz Core 2 Duo

    I am having increasing problems with freezes requiring forced shutdown and reboot on this computer. Have been using 10.6.4 since it came out. What I have done so far: 1. Run Disk Warrior: only minor problems 2. Repaired permissions; reinstalled 10.6.