DISASSEMBLE is being executed for long time in SPAM

Hi ,
I am trying to applying SAP_BASIS patch in new XI 3.0 server .But it got hanged in <b>DISASSEMBLE is being executed</b> for long time in SPAM.
Can any one will me to solve in this issue.
Thank You !
Gopnath.G

Hi
The following Patch manager may be useful
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
Regards,
Sai

Similar Messages

  • Workflow trf executing for longer time

    Hi All,
    Workflow trfc executing for longer time in transaction SM58. Why will this happen ? Is there any resolution available ? Please advise on this issue. Below are the details :
    Caller: WF-BATCH
    Function Module: SWW_WI_EXECUTE_INTERNAL_RFC
    Status Text: Transaction Executing
    Program: SAPMSSY1
    Kind Regards
    Shiva

    Hi,
    Check if WF-BATCH user is not locked or the pwd changed. The same as the process started, see the event trace if you are triggering any wflow from this. And CLick on the event and see the "REceiver Data" and "Trace Data" if any errors are there.
    Sometimes, if this user got locked for some reason, it results in issues like you mentioned.
    Hope this helps
    venu

  • SP Executes For Long Time

    Hi There,
    I'm having 150 lines of SQL statements (SQL Server 2000),
    with 5 parameters, executes in 12 seconds. But when I make a Stored
    Procedure out of it (with exactly the same 150 lines of code) with
    5 input paramentes, the execution take from 5 to 10 minutes.
    There is a huge difference in execution time 12 sec vs 10
    minutes for exectuing the same code. Has anyone experianced this
    before?
    Many thanks

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/appletv.html

  • Flat file data sources info pack executing for long time with yellow

    I can see flat file all records 140 in above screen but i could not see data in PSA . when i am trying to see the PSA it show not data .
    I have tries to make status to green but still request not process to Data target .

    HI,
    When you see message like there is no psa mean data source was not in active.
    so activate your data source Thru by using SE38 - RSDS_DATASOURCE_ACTIVATE_ALL(bw 7.x).
    After the activation you can try to load data.before that make your yellow request to red status and delete it.
    later reload the same flat file.
    Thanks

  • CFSTKE* Queues with few entries executing for long durations  (10 hrs)

    In APO 7.0 the CFSTKE* Queues with few entries executing for long durations  (10 hrs)
    Below are the FM from the queue 
    /SAPAPO/CIF_IRQ_REDUCT_INBOUND
    /SAPAPO/CIF_STOCK_INBOUND
    /SAPAPO/CIF_SL_DOC_INBOUND
    /SAPAPO/CIF_SL_DOC_INBOUND
    Do any one have the same problem and any fixes ?
    Thank You

    Hi Aravind,
    What is the status of your queue:
    Is it in status running, ready or sysfail?
    If it is in "Running" status since last 10 hours then check the following things:
    Check SM51 and see if you find a long running process, see if it is trying to do a sequential read on some table.
    If yes then ask your Basis team to run ST04 and see what index it is using,
    If that is also fine then ask them to check stat on that table.
    Builiding stat may help if a read on table is taking long time and index which is being picked up is correct.
    Your basis team should be able to help you.
    I hope it helps.
    Thanks,
    Anupam
    Edited by: Anupam Sengar on Aug 11, 2011 12:06 AM

  • Messages waiting in the queue for long time.

    Hi Experts,
    We are having some Production issue - messages were waiting in the queue for long time and we found the errors in defaultTrace.12.trc file -
    Please help how to solve this issue its production and we need to move forward and solve this issue asap.
    XI AF API call failed. Module exception: (No information available). Cause Ex
    ception: 'JDBC Adapter configuration not initialized: null'.
    Thrown:
    com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'JDBC Adapter configuration not
    initialized: null'.
            at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214)
            at com.sap.aii.af.service.api.AdapterAccess.call(AdapterAccess.java:99)
            at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.process(AdapterProxyLocal.java:87)
            at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.call(SystemAccessorInternal.java:47)
            at com.sap.aii.mapping.lookup.SystemAccessor.call(SystemAccessor.java:115)
            at com.sony.pi.sp.StoredProceduresHandler.runScalarStoredProcedure(StoredProceduresHandler.java:86)
            at com.sap.xi.tf._MyPage_Invoice_SAP_to_Loyalty_MM_.invokePROC_CUSTOMER_DEDUP$(_MyPage_Invoice_SAP_to_Loyalty_MM_.java:1272)
            at sun.reflect.GeneratedMethodAccessor384.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.aii.mappingtool.tf3.rt.C2CFunctionWrapper.cacheContext(C2CFunctionWrapper.java:91)
            at com.sap.aii.mappingtool.tf3.rt.C2CFunctionWrapper.gotoNextContext(C2CFunctionWrapper.java:44)
            at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.cacheQueue(Q2QFunctionWrapper.java:86)
            at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.gotoNextContext(Q2QFunctionWrapper.java:41)
            at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.cacheQueue(Q2QFunctionWrapper.java:74)
            at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.gotoNextContext(Q2QFunctionWrapper.java:41)
            at com.sap.aii.mappingtool.flib3.CollapseContexts.gotoNextValue(CollapseContexts.java:52)
            at com.sap.aii.mappingtool.flib3.CollapseContexts.gotoNextContext(CollapseContexts.java:37)
            at com.sap.aii.mappingtool.tf3.rt.AResIterator.gotoNextContext(AResIterator.java:37)
            at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.gotoNextContext(FunctionWrapper.java:37)
            at com.sap.aii.mappingtool.flib3.IfWithoutElse.gotoNextContext(IfWithoutElse.java:58)
            at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:266)
            at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:326)
            at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:326)
            at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:415)
            at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142)
            at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:118)
            at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64)
            at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92)
            at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
            at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
            at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)

    Hi All,
    CPACache refresh worked for one day and the same problem repeated again next day, but need to have parmanent fix and should know the root cause of the problem so that the problem can not be repeated again.
    Is there any solution other than  CPACache refresh and JDBC adapter stop and start to fix the issue.
    And also found some entries in SM12 lock entry list during the same schedule time when the messages was triggered and remains for long time. Let me know whether we can delete those locks ?
    user PIAFUSER
    Lock mode E
    and table SXMSPMAST
    with lock argument ......
    Any suggestions and tips help us alot in fixing this issue.
    Thanks in advance
    Gary.

  • How to stop process chain if it yellow for long time

    hello all,
    I see that my process chain is running for long time and is yellow for more than last 24 hours now. I can see where the chain is stuck(not going ahead).
    What do we normally do in such scenarios?
    Also one more question I have is about delete PSA request process variant. Can i use the same variant in two different process chains, is yes than do I have to include the name of the PSA tables that are in both the process chains. When the variant runs in 1st chain does it delete the PSA tables from the second chain as well..(i hope i made this clear)
    Thanks in advance

    Once you have done with your init load manually. Then in case it was just the start of the process in ur Process Chain then first remove the chain from schedule and then go to the start process of the process chain and save the setting for immediate, uncheck the periodic box and save and then come out of the screen and then execute and activate the chain.
    Note:
    1. Before changing the setting in the start process make a note of the start time and also its periodic value.
    2. Once the chain is completed then change the setting in the start process back to previous start time and periodic value.
    3. Don’t forget to save and activate the chain.
    Regards,
    Rohini

  • Interface execution going on for long time.

    Hi All,
    I am executing one interface and that is running for long time on one of the step.
    but its underling query is easily returning rows in database.
    How to check why is not completed that step.
    Thanks for help.

    So it means there is not such option available to check what is going inside particular execution.
    But some how it got executed...after a long time.
    Thanks
    Nawneet

  • When request is submitted it goes for pending standby for long time

    Hi all,
    Does anyone have any idea about this?
    When im running oracle standard report on production its going to Pending Standby for long time and then it works normally whereas when i run the same report on clone server it directly runs without making any wait. Can anyone advice me what could be the issue related to this. Im unable to get to the root cause, so need your advice.
    Ours is 12.1.2 EBS - RAC (11.1.0.7) - HPux (11.31) env for production
    12.1.2 (EBS) -- Single node(11.1.0.7)-Hpux (11.31) env for Clone.
    thanks in advance.

    increase some processes in cuncurrent manager.
    Reagrds,

  • Report running for long time & performance tuning

    Hi All,
    (1). WebI report is running for long time.so what are the steps i need to check for it ?
    (2). Can you tell me about performance tuning in BO ?
    please help me.....
    Thanks
    Kumar

    (1). WebI report is running for long time.so what are the steps i need to check for it ?
    The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
    (2). Can you tell me about performance tuning in BO ?
    I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
    Regards,
    Stratos

  • ABAP process job ( BI_PROCESS_ABAP ) in process chain running for long time

    Dear Experts,
    We have an ABAP process job  BI_PROCESS_ABAP  in a process chain. This job is running for a very long time than previous run time.
    Recently we had an ORACLE database upgrade from 9.2 to 10g.
    From the very next day , we are having this problem.
    And also previously this process-chain was under control of BASIS guys . they were using a tool called CRONACLE to schedule it. At the time of upgrade this tool was crashed and they asked us to schedule it in BW system instead.
    Underlying program is using two custom tables.
    one is having both primary & secondary indexes but the other table is having only primary index.
    I am not sure whether we have secondary indexes on other table prior to upgrade or not.
    Where must be the problem?...
    At the time of upgrade BASIS has re-organized the table space along with database upgrade.
    please help me...
    Regards,
    SRIKANTH

    Please ask yr basis consultant to check the system parms.
    Below i have listed down SAP recommneded system parms .
    abap/heap_area_total 4000000000
    abap/heap_area_dia 2000000000
    abap/heap_area_nondia 2000000000
    Also check in SM37 if any other jobs are running for long time, peventing the your job running.
    Check the SM12 for locks or SM58

  • Wait step in quality is waiting for long time

    hi friends
      I have transported the workflow to quality. Am using a wait step in my workflow. Its waiting in that step for long time nearly 1 hour still its not cross the step. The workflow works fine in my developement. But in quality its not moving to the next step. i comparted the wait step in quality and developement. In developement wait step in outcomes tab green light is glowing in Actvie mode. but in quality green light is visible but in blured vision. even i have checked the configuration in swu3 in development and quality. Both have same configuration. What could be the problem that its not crossing the wait step. Plz help me
    Regards
    vijay

    hi Pavan
      I havn't used any deadline. Its working fine in development. y in quality its not working. That is my question. Even i have checked in the development wait step from the log i have these 3 steps for histroy
    Wait step created                                No errors
    Condition for wait step fulfilled               No errors
    Result Processing                               No errors
    But in quality
    Wait step created                                No errors
    Only these step is alone there. its has not yet come to other step. But my condition is fullfilling has i checked from the container elements. Am waiting for more than 3 hours. Still its not come to next step. y what could be the reason.
    Regards
    vijay

  • Programs which are not being executed for a specific period

    Hi,
    We are planning to do the application upgrade in few months,with respect to that we would like to find out what all programs/transactions(standard or custom) which are not being executed for a specific period.What is the way to find this?
    Regards,
    Sam

    Hi Sam,
    You can use st03 and defice theprograme name and period to sotp the activity.
    Regards,
    Anil

  • Custom web parts in SharePoint 2013 becomes inactive when the session is idle for long time.

    Hi,
    We have a search center site with custom web parts and custom master pages. When the session is inactive for long time all the custom web parts in the page doesn't work, unless we close the browser and open it. Where as this is not the case with the
    OOB web parts. We are not able to identify the root cause as it works with OOB web parts and not the custom web parts.We were able to find that by increasing the session timeout of the web application we can avoid this issue.We do not want to increase the
    session timeout as the OOB web part works perfectly even when the user session is idle for long time.Is there any other alternative where we can acheive the same for custom web parts when the session is idle for long time?
    Thanks,
    Saranya

    Hi Saranya,
    According to your descirption, my understanding is that when the session is long time idle ,then custom web part will not work.
    I suggest you check if you have enable the session in the Page Level in the web.config. By default SharePoint disable the session state.
    In the web.config, you will see <page enableSessionState> tag. You can modify like below and test if it works.
    <pages enableSessionState=”true” ….. />
    Here is a detailed thread for your reference:
    Use Session State in SharePoint
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Automatic logout after lock screen for long time?

    When I leave my mac screen locked for long time, sometimes I see the following message after unlocking screen:
    "Logout has timed out because the application [x] failed to quit...."
    Where [x] is some application trying to quit, and is waiting for user confirmation. This happens even when the computer is plugged in to AC. Has anyone else seen this problem? TIA

    Found it:
    http://www.askdavetaylor.com/canmac_automatically_log_out_user_afterinactivity.html
    D'uh

Maybe you are looking for

  • Sample ANT-generated project

    Anyone know where I can download source for a simple project that uses ANT/XDoclet and is built, verified and deployed to the Sun Java System Application Server Platform Edition 8? Ideally, such a project would house CMP beans and an application clie

  • Global Bike configuration (?) problem in dataset

    My class this semester is working through some of the Global Bike case studies.  We recently completed the initial case study where a new customer is created, an inquiry, quotation, sales order, etc. through to payment. Dataset 56 appears to have wha

  • How to upload the attachment using JSOM

    Hi, I am creating a new custom form for the list and attachements are enabled in the list.  I am creating an app part to show the custom form. My query is how to use the attachment field and how to insert the data, any links and code is appreciated.

  • Release strategy challenge

    hi all. our maintenance department requested a very specific release strategy for purchase requisitions with account assignment F (workorder). their release is based on several factors: 1) amount: 0>2000 it must be released by the main work center wh

  • Help Using SQL Plus

    I have personal oracle, I want to learn very basic commands. When I start SQL Plus 8.0.6.0.0 via the internal/oracle user/pass and then try to send the following command: select customer_id from customer; I get the following message ORA-00942: table