Disaster Recovery server for SAP and HACMP Cluster script for SAP ECC 6.0

Hi,
I need  document for Disaster Recovery server for SAP? I have to configure the DR Server If you have, please share this document if possible.
Have you any cluster script ( HACMP Cluster script for SAP ECC 6.0 ) ?
Thanks & Regards,

Hello, I'm doing a "Plant ECC6 to do a test disatre / Recovery.
During the installation, I would use the same <sidadm> existing as it is in the PRD.
If I tell you to install it during the same <sidadm> it will overwrite what already exists, or do I just enter the password of existing <sidadm>?

Similar Messages

  • Dispatcher status  showing stopped for disaster recovery server.

    HI,
    today to test the data in our disaster recovery server for which we have log shipping every 30minutes we started the server in sap level during the process we can see that work +disp status is showing stopped.when i checked the log files in work directory it is showing below errors.
    C  sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
    M  *  LOCATION    SAP-Server atriooonsapdr01_INP_00 on host terhsapdr01 (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Mon Oct 06 16:31:42 2008
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        9780
    M  *  COUNTER     1
    kindly suggest what to check and how to resolve.

    Hi Anil.
    you should be sure if user SAPINPDB exists in the database system and it is mapped to the SAPINPDB user of the DB.... this if you use SQL Server, but the rule should be something like this in other DB systems!!!
    Regards
    Pedro

  • Datafiles Mismatch in production & disaster recovery server

    Datafiles Mismatch in production & disaster recovery server though everything in sync
    We performed all the necessary prerequisites & processes related to DRS switchover successfully also our DRS server is constantly updated through logs application in mount state whan we opened DRS database in mount state it opened successfully however when we issued command
    Recover database
    It dumped with foll errors:
    ora-01122 database file 162 failed verification check
    ora-01110 data file 162 </oracle/R3P/sapdata7/r3p*****.data>
    ora-01251 unknown file header version read for file 162
    as I do not remember the exact name now
    However upon comparing the same file at production(which was now in shutdown state) the file sizes were mismatching so we went ahead to copy the datafile from production to DRS in database shutdown state at DRS through RCP utitlity of AIX 5.3 since our Operating system is AIX 5.3
    Though this remote copy was success
    we again started database in mount state & issued command
    Recover database
    But still it dump the same error but now for another datafile in DRS
    I mean I would appreciate if somebody could point out that despite our DRS was constantly being updated through our Production in terms of continuous log application before this activity logs were sync in both the systems also origlos,mirrorlogs & controlfiles were pulled from production system as it is infact the whole structure was as replica of production system , then why did datafile sizes mismatch??
    Details
    SAP version :- 4.7
    WAS :- 620
    Database :- Oracle 9.2
    Operating system :- AIX 5.3

    I am in a process of DR Planning.
    My present setup :
    O/S : HP-UX 11.31
    SAP ECC 6
    Oracle 10g Database.
    I know about dataguard and i have implemnted same on our other application but not for SAP.
    I have ame doubts and I request you to please guide me for the same.
    1. SAP License key -- it required hardware key. So will i have to generate license key another hardware key i.e. for machine where standby database.
    2. Database on standby site will be in manage recovery mode. Will I have to make any changes or any other file realted to SAP on standby host ? (some i know such as I upgrade SAP kernal, same i have to upgrade at standby host)
    Will you give me some link related to document for DR

  • Disaster recovery server

    hi experts
    i am using
    SAP Version: ECC 6.0 SR3
    Database Version: 10.2.0.4
    OS Version: HP-UX B.11.31
    i have a server where O/S installed. i want to make this as a disaster Recovery server.
    now i want to know.
    1- what is the man power needed.?
    2 -which technical guys i needed.? 
    3-how much time it will take?
    4- can a basis consultant only do this job?
    5-Is any separate team for DR server installation.
    kindly guide me in detail regarding this.
    thanks

    > SAP Version: ECC 6.0 SR3
    > Database Version: 10.2.0.4
    > OS Version: HP-UX B.11.31
    >
    > i have a server where O/S installed. i want to make this as a disaster Recovery server.
    > now i want to know.
    > 1- what is the man power needed.?
    It's possible to do all this with one guy, but if you're inventive you can surely employ more people with this.
    > 2 -which technical guys i needed.? 
    You will need people that are actually capable to do this.
    The most likely people for that seem to be HP-UX and Oracle admins.
    > 3-how much time it will take?
    Depends totally on the business recoverability requirements.
    How much downtime can it take until your business breaks?
    How much is business willing to pay for that?
    Usually you build the whole backup setup around those two questions.
    > 4- can a basis consultant only do this job?
    Depends on the basis consultant.
    Usually those guys can at least recover the database.
    > 5-Is any separate team for DR server installation.
    Well, if there is one in your company - yes.
    Most often and usually there won't be an extrea team for that as ensuring recoverability is one of the prime tasks of every DBA.
    regards,
    Lars

  • How to migrate Planning from Production to Disaster-Recovery server?

    We are using Planning 11.1.1.3 Oracle repository. Presently our DR Planning Application name is different than production's name, and the DR's Windows server names are different from Production's. Otherwise, all other configuration the same.
    How do we migrate Planning from Production to Disaster-Recovery server? We stopped Planning on DR server. Then we exported production planning Oracle repository and imported it to DR Planning. We restarted DR's Planning. DR planning seems to be running fine, but I am afraid to click "Refresh Planning" on DR Planning - it might update Production server. So how can I be sure DR and Production planning are disconnected ?
    Is there anything we need to do? This method seems to be faster than migrating with LCM.
    Edited by: Essbase Fan on Oct 18, 2010 10:11 AM

    You are definitely go about it the correct way, if you are migrating the whole planning application I have to agree it is a safer and quicker route.
    The connection information to essbase is stored in the planning system database/schema so as long as you have not migrated that then you should be good to refresh.
    To put your mind at rest, log into the planning application and edit the datasource associated with the application then you will see where the essbase server is it is going to refresh.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • What is SM62 Tcode is used for? and the consequence's for executing it?

    What is SM62 Tcode is used for? and the consequence's for executing it?
    Thank you,
    York

    Hi Les,
    You can goto this URL to understand more about events :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/44/c079239d3756a2e10000000a1553f6/frameset.htm
    http://www.sapfans.com/sapfans/sapfaq/robert.htm
    About my experience working with events:
    In one of my BW Project: we were using AutoSys to do job scheduling (to run InfoPackages).
    To automate the loading process we created events for  each infopackage. Then in that Infopackage we used to select option "Start later in Background" and then select option "After Event". Then specified the event name and parameter.
    Then in the same infopackage we selected button "Subsequent Process" the in that seelct option "Trigger Events" Here you can have options to specify if this event is successful then what next event to trigger and if this event fails what next event to trigger.
    So this way we used to automate data loads.
    This was dont caz there was no process chains concept during that time. So good example of events and event based process are PROCESS CHAINS.
    Hope this helps !!
    Assign points if helps !!
    Regards,
    Naveen Rao Kattela

  • Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"

    Hello All
    I hope that you can help me is juts a doubt about 2 check boxes
    I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
    that i don't know what is the difference
    The path is the following
    Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert  --> Setup EarlyWatch Alert
    Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
    Thanks and have a nice day

    Hello Cherios,
    The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
    Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
    There should now be no doubt about the two check box fields .
    Hope this information is helpful.
    Regards,
    Paul

  • I have tried downloading photoshop cs2 and cs4 on a new computer.  I have the disc available for cs2 and the serial number for cs4.  They are both registered in my name.  I need help doing a download.

    I have tried downloading photoshop cs2 and cs4 on a new computer.  I have the disc available for cs2 and the serial number for cs4.  They are both registered in my name.  I need help doing a download.  I was able to get part way through cs4, it showed up in my downloads but never got as far in the process as to ask for serial numbers.  I tried with cs2 and I got an error message that some bit of information was incorrect.  I currently have both downloaded on two other lap tops I own.  One is operational and one is dead.  I cannot access the dead one to remove the program. Thank you in advance for any assistance.

    For CS2 you will need to download a special new version
    CS2 Activation
    You might find CS4 download here
    Prodesign Tools — Photoshop Direct Download Links

  • My IPhone 5's Imessages just stopped working and I tried restarting and then turning them off and turning them on.  It now says "Waiting for activation" and has said this for 15 minutues.

    My IPhone 5's Imessages just stopped working and I tried restarting and then turning them off and turning them on.  It now says "Waiting for activation" and has said this for 15 minutues.

    At the time of this post, there seems to be a problem with iMessage and Facetime but only some users are affected.
    http://www.apple.com/support/systemstatus/

  • Home sharing is working fine for musics and videos but not for apps. What is wrong?

    Home sharing is working fine for musics and videos but not for apps. What is wrong?

    i had the same issue as everyone here after upgrading to itunes 10.x.  vista could see xp home share.  ipod touch could see xp home share.
    neither could see vista home share.
    after several hours of authorizing de-authorizing, rebooting router etc, i knew it had to be a firewall thingy with vista as xp was working fine
    i went to this article http://support.apple.com/kb/ht2553 and followed the instructions.  itunes was already in my vista exception list.  on a hunch i deleted the itunes exception and followed the steps to add it again and boom it worked!! i could now see my vista machine from my ipod touch immediately.
    something must have screwed up the firewall exception on the upgrade to itunes 10.x
    it worked for me, i hope this helps others

  • I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

    I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

    sjrozas wrote:
    I'm only trying out the subscription. Thanks for being so concerned about my finances.
    Sent from my mobile.
    Your initial post indicated that you had a CC subscription. That seems to imply that you have subscribed. If you hadn't already purchased Lightroom 6 I would suggest that you wait until you decide about CC. You really don't need both because the Lightroom program is precisely the same except for Lightroom 6 without the creative cloud has no Lightroom mobile capabilities. But I was only trying to help.

  • [svn] 4235: Fix for - Links and type information missing for air.update. event events in @event listings

    Revision: 4235
    Author: [email protected]
    Date: 2008-12-04 13:02:39 -0800 (Thu, 04 Dec 2008)
    Log Message:
    Fix for - Links and type information missing for air.update.event events in @event listings
    Also adding support for multiple @event for a method.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-18319
    tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18319
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    Hi All,
    I have sorted out the problem and this is fixed now.
    Regards,
    Ajay Kunde

  • I have a second coppy of cs6 design and web premium. Its only for mac and I need it for pc. Can i swap its platform?

    I have a second coppy of cs6 design and web premium. Its only for mac and I need it for pc. Can i swap its platform?

    From Adobe: "If you have an older version of a product, you must order an upgrade instead of a swap." Because you have a CS6 suite your only option may be to subscribe to Creative Cloud in order to get current cross-platform versions of all their applications. Check here for further info: Order product | Platform, language swap

  • %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure

    Hi,
    I have an ASA5510 running version 8.2(5). I have set up a new network on interface Ethernet0/1.777 of the fwl. The firewall works perfectly with remote access VPNs but has now given me the error with the new network that has been set up:
    %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure
    The difference between the other networks and the new one that I have set up is that this is the first one using a private addressing scheme. I understand that NAT is not allowing something along the way but I cant figure out what needs to change in order to get it to work. My config is as follows:
    interface Ethernet0/1.777
    description TRU 777
    vlan 777
    nameif tru777
    security-level 50
    ip address 10.1.34.17 255.255.255.240 standby 10.1.34.18
    access-list acl_tru777 remark * ALLOW ALL OUTBOUND *
    access-list acl_tru777 extended permit ip any any
    access-list RA-VPN extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
    access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 10.0.0.0 255.0.0.0
    access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 172.16.0.0 255.240.0.0
    access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 192.168.0.0 255.255.0.0
    access-list acl_ra-lock-tru777 extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
    access-list acl_ra-lock-tru777 extended permit ip 10.159.159.0 255.255.255.0 10.1.34.16 255.255.255.240
    ip local pool ra-pool 10.159.159.0-10.159.159.254 mask 255.255.255.0
    nat (tru777) 4 access-list acl_no-nat
    nat (tru777) 2 10.1.34.16 255.255.255.240
    global (outside) 2 x.x.x.x
    crypto isakmp nat-traversal 20
    I think that is everything you should need, if not please just ask.
    Thank you very much in advance,
    Chris

    Hi Julio,
    Here you go:
    FWL01# sh nameif
    Interface                Name                     Security
    Ethernet0/0              outside                    0
    Ethernet0/1              CLIENTS                 50
    Ethernet0/1.314        tru01                      50
    Ethernet0/1.313        dmz01                    50
    Ethernet0/1.316        tru02                      50
    Ethernet0/1.776        dmz776                  50
    Ethernet0/1.777        tru777                     50
    Management0/0       management           100
    FWL01#  sh run nat
    nat (tru02) 1 192.168.3.0 255.255.255.240
    nat (tru777) 4 access-list acl_no-nat
    nat (tru777) 2 10.1.34.16 255.255.255.240
    FWL01#    sh run glob
    global (outside) 1 interface
    global (outside) 2 x.x.x.x
    Thanks,
    Chris

  • [svn:fx-trunk] 8551: Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed .

    Revision: 8551
    Author:   [email protected]
    Date:     2009-07-14 11:31:50 -0700 (Tue, 14 Jul 2009)
    Log Message:
    Fix for focusSkin and errorSkin to account for bogus bitmap snapshots when objects are 3D transformed.
    Bugs: SDK-17766
    Reviewer: Glenn
    QE Notes: None
    Doc Notes: None
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-17766
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ErrorSkin.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/FocusSkin.as

Maybe you are looking for

  • How to identify the dtp used in the process chain in bi 7?

    Hi all, I have a a couple of dtp in the production system, i need to find out what are all the process chains using this DTP? Can anyone help me on this!! thanks

  • Weblogic 10 spring bean intialisation problem

    I am having 2 ear file deployed in one weblogic 10 server. Each ear file contains same spring bean(e.g "fsiAuthService" bean) definition under applicationContext.xml file belongs to each ear. But while deploying both the ear file in weblogic 10, I am

  • How do you retrieve emailsafter hitting the archive box

    had couple emails disappear when I hit archive,,anyway to get them back

  • Ipod Update 4.3.2 Crash

    After updating my ipod touch 3rd gen to the lastest update, all my apps crash except for the ones that come automatically with the ipod. Anyone else having this problem? I need help ASAP!

  • Implementing BADI BDCP_BEFORE_WRITE

    Dear Experts, I have implemented BADI BDCP_BEFORE_WRITE for a message type /SAPSLL/CREMAS_SLL. I have also added code to the method FILTER_BDCPV_BEFORE_WRITE. I have also placed a break point inside the implmented method. But at runtime I am unable t