Disc does not run down on power save iMac 27 Lion
My hard disc does not run down when the computer goes into sleep on power save. It does run down when I put it into sleeo manually.Is there a cure? Its a brand new 27 inch Mac with Lion
Do you still have the problem? I experience the same issue but not every time I shut down. I hope for a fix with the next release...
Similar Messages
-
My quicktime does not work at all on my iMac with Lion
When I click the quicktime icon it does not open up at all. Quicktime has never worked since the day I bought the computer which was a few weeks ago. Is there a fix to this problem?
Your warranty includes 90 days of phone support. Call AppleCare.
-
Firefox 4 Does Not Run on Non-Intel G5 iMac
I have a G5 iMac/Power PC/NON-Intel. I keep getting alerts to upgrade to Firefox version 4. Clearly, that's impossible because version 4 doesn't run on a non-Intel G5 iMac. Is Firefox going to leave people like me in the lurch, or is there an update in progress for iMacs that can't support Intel-associated software?
There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
-
Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. I did restore the iPad about 8 times during the past 2 weeks. Just completed another restore. iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready. That was 30 minutes ago. iPad still won't start. I am looking down the barrel of yet another fruitless restore. What a crap product.
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
HP DV6 3209 TX does not shut down properly & sometimes very slow
Hi,
I bought a HP Pavilion dv6 3209 tx laptop only one month ago. It provided Win Home Basic. I tried to install Ubuntu 10.10 Maverick along with it, from a pendrive .... I didn't get installed, & at that time, The screen suddenly became colourful with some bizarre symbols !! I shut it down with the power key.
Since then, The home basic became very slow, cpu usage often reaches 100% or very high even while idle, does not shut-down properly.
Then I formatted the hard disk,clean-installed Win 7 Pro (Got it from msdnaa) as well as ubuntu maverick. Now when I restart the system, it shuts down & restarts. But if shut down, then the desktop goes blank, but the fan keeps running, power indicator keeps glowing, system never shuts down till the power key is long-pressed. Also, The CPU usage becomes very high, sometimes it's normal.
I'm confused. Is that any hardware issue ? Do I need to format it again, install xp sp3 & check it if the problems remain ? Please help !!
when the lappy runs in Ubuntu, it's operating speed or CPU usage is normal ..... even when I'm writing this reply from Win 7, everything is normal, but sometimes it's not so smooth...... task manager shows CPU usage as 90 % or more !! I've decided to install xp & then check if the shutdown issue & slowness remains there too.
Windows-Linux-Unix-MacSOLUTION :
Open the BIOS (at the starting press f10).
f9 to restor default
Then save and exit (press f10 again)
Restart the computer.
Do this again and set it back to "Enable" that wil help the computer to not over heat.
And now your ROVE will start and sleep correctly. -
Monitor Does Not Shut Down In 15 Minutes
Under power options the monitor is set to turn off on 15 minutes. updated my Shockwave Flash to 10.0 r42 when a flash video is played in any of of my browser and the browser is shut down the monitor does not shut down in 15 minutes. the computer has to be rebooted and then everything is fine. reinstalled Shockwave Flash 9.0 r124 for firefox opera and the situation is ok.
can not understand why the new flash causes this problem.
computer exceeds all of adobe requirements.
if a monitor does not shutdown in power schemes it usually indicates a process running in the bachground.
In this case there appears to be none and it would suggest there is a problem with Shockwave Flash 10.0 r42 and possibly with all shockwave
player 10 have that problem.
Last year tried another version of 10 and had the same problem
install_flash_player_ax.exe 9.0 r124 will not install on my computer as a pop up says its not the most current version.
install_flash_player_9_ax.exe 9.0.260.0 will install but on most sites a pop up will say flash 10 is required.
Dont know what adobe is up to but clearly something is wrong.
Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account.
http://superuser.com/questions/1627/how-to-automatically-remove-flash-history-privacy-trai l-or-stop-flash-from-stori
Its surprising that no one has noticed this bug and also would like a working copy of install_flash_player_ax.exe 9.0 r124
Any comments would be appreciated.filed a bug report with adobe.
the attachment will explain it.
the problem has been fixed in a future beta 10. -
I have a Macbook Air 13.3" 2012 model. For a couple of days my Macbook does not shuts down. It just stops at a blank white screen with the cursor still hovering around it. I have to shut it down forcefully every time using the power button.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Hard disc does not exist? g series
hi my notebook (hp pavilion g series 750g, 6 memory) has been rebooting its self then a black screen saying hard disc does not exist, then it won't let me on pc, any idea's please?
This question was solved.
View Solution.Hi
Please try these steps might help you to fix the issue.
1) Once unit is powered on keep tapping the F10 key go to Diagnostics and check if the Hard drive is detect if Yes please run the test and if is working fine. Incase Hard drive is not getting detect please reseat the Hard drive from the back panel off the Notebook. Incase you have the same issue. Please check the warranty status and get the drive replace please call HP Technical support for the same.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Ap 3700 PoE with PSE that does not support CDP/LLDP power Negotiation
We run into a problem when AP 3700 is connected to an 802.3at PSE
that only supports physical event classification as compliant to 802.3at standard for PSE,
but does not support CDP/LLDP power negotiation.
AP 3700 (I believe the firmware version does not matter much) cannot get enough power after not receiving any CDP/LLDP power negotiation packet. (get no more than 15W power although PSE supports 30W.)Hi Leo,
Thanks for the information, and do you know if Phihong power injector supports 802.3at LLDP power negotiation or not?
And is there any special configuration on AP3700 side like disabling CDP/LLDP power negotiation to make it to work with such power injector, and what is the command if there is any?
Thanks again, Leo. -
Simple Operational Profile and Plan does not run against agent
So i'm attempting to use the Operational Profile function of Ops Center to extend some functionality which it does not have (set up bonded interfaces during build process of OL 6.x)
However my script is having issues it never seems to run as a remote shell. So I simplified it, and broke my script down to simply
#!/bin/bash
/bin/pwd
/bin/ls
exit 0
And it still failed to run.
I've poured over the documentation, my script runs fine when manually incanted from the command line.
I've attempted following https://blogs.oracle.com/oem/entry/ops_center_using_operational_profiles but as you can see even my simple of simple plans does not run, let alone anything more complex.
Full job logs:
Job ID : EC-SERVER.com.au.664
Job Name : do ls script;AGENT
Job Type : Execute-DeploymentPlan
Job Description : -
Run ID : 1
Status : FAILED
Mode : Actual run
Owner : xvmadm
Create Date : 11/11/2014 09:03:04 AM EST
Start Date : 11/11/2014 09:03:04 AM EST
Last Updated : 11/11/2014 09:03:08 AM EST
Execution Order : PARALLEL
Failure Policy : CONTINUE_ON_FAILURE
Task : AGENT
Task : CmpExecuteTask
Task : ExecuteTask
Task Run ID : 24369
Target : AGENT
Status : FAILED
Result : Task failed. (15030)
Logs :
11/11/2014 09:03:04 AM EST INFO EC-SERVER.com.au.664.1.24369 acquired the recursive lock on the target - PC-SERVER.com.au-172a7b21/AGENT.com.au-abf1fc69/com.sun.hss.domain:name=localhost,type=OperatingSystem for the duration of Task
11/11/2014 09:03:04 AM EST INFO Task is posted to the Proxy Controller (PC-SERVER.com.au-172a7b21), from the Enterprise Controller. (15011)
11/11/2014 09:03:08 AM EST INFO Task is received by the Proxy Controller. (15012)
11/11/2014 09:03:08 AM EST INFO Task is posted to the Agent Controller (AGENT.com.au-abf1fc69), from the Proxy Controller. (15013)
11/11/2014 09:03:08 AM EST INFO Task is received by the agent controller.
11/11/2014 09:03:08 AM EST INFO EC-SERVER.com.au.664.1.24369 released the recursive lock on the target - PC-SERVER.com.au-172a7b21/AGENT.com.au-abf1fc69/com.sun.hss.domain:name=localhost,type=OperatingSystem for the duration of Task
I wanted to avoid raising an SR for something so potentially trivial, but what the heck is going on here?Nothing? no one uses this functionality?
-
Adobe Reader XI does not run using Win7 Pro
Trying to run Adobe Reader XI on a PC running Win7 Pro, but it starts, gives gray screen, then shuts down. However, I can read pdf docs within Google Chrome.
I was running Reader version 10 with no problem, went to upgrade to 11, and now no versions work, as I've tried to uninstall and reinstall ver 9,10,11 but none work. Help!I ran the script but does not fix issue.
When I run Adobe Reader or click on a .pdf file on my drive, the Adobe reader program starts, but gives a gray screen while my hard drive spins, then program closes.
any ideas?
Thanks,
Ken
Pat Willener <[email protected]> wrote:
=============
Pat Willener http://forums.adobe.com/people/pwillener created the discussion
"Re: Adobe Reader XI does not run using Win7 Pro"
To view the discussion, visit: http://forums.adobe.com/message/5211526#5211526 -
Premiere elements 11 - project assets menu does not pull down - I can't see what media I have added.
HI, When I press the arrow for projects assets, I cannot see any assets. Actually, I cannot seem to add any via the add Media option in the expert view, but, if I use the quick view I can drag and drop. Please help. While I hope it is something simple, I am willing to reinstall or upgrade. Please advise. Thanks!!!!
swope1
What computer operating system is your Premiere Elements 11 running on?
Does the problem exist with and without the antivirus and firewall(s) disabled?
I would not move to Premiere Elements 12 or 13 just yet.
How long have you been working with the program without the problem from the day of purchase until now?
Are you saying that you cannot use Add Media (click on triangle and list does not drop down) as well as use
Project Assets (will not open)? If both is the case, I would encourage you to do
a. Deactivate the program in an opened project's Help Menu/Update - then close out of there.
b. Uninstall the program using the usual Control Panel way
c. Do a free ccleaner run through (regular and registry cleaner parts)
CCleaner - Download
d. Reinstall the program with antivirus and firewall(s) disabled.
Please let us know the results. Then we can decide what next.
Thank you.
ATR -
Siri does not work unless I power off and repower my I5 phone
Siri does not work unless i power down my I5 phone and repower it. I have to do this each time I use Siri
This might help.
http://www.youtube.com/watch?v=v5dPmXGVCfw -
My Ibook does not run on battery when it reaches 48%. It just shutsdown with no warnings. I have to connect the AC adapter to work if i disconnect it the ibook just shuts down. I have to waut until it reaches 100% and then i take the AC adapter. I book shuts down and after i turn it on with out the AC and it stays running on bat until the 48%. Then i have to go through everything again.
Jobbaman wrote:
Till now my battery has been working perfectly. The machine is about 1 year old and I use it heavily for my work. I prefer to unplug my battery when it's full, and use it till it go's to sleep before plugging it in again. This results in a very high Cycle count (453) but a still perfectly working battery (98% according to CoconutBattery), I can use the machine for about 4 hours on a full battery.
The amperage would be 0 since your battery is not in a charge cycle.
Part of your problem could honestly be your cycle count and method of caring for your battery. If you check some of the research about Li_ion batteries this is the worse way to use it. Li-Ion batteries work best with little charges. Deep cycling Li-Ion can kill the cells. There is no good reason to charge the battery and then use it as you have been doing. This just kills your battery for no reason. The MacBook is designed to cut the charge off when the battery is full and it does not hurt the battery to lie idle like this. The method you're using can prematurely kill your battery.
Either the battery has a problem that is not showing on you readings or the battery circuit is fried. Do you know someone that has a MacBook or live near an Apple store so you can test your battery on a known good MacBook. Or you could try one of their batteries in it.
Maybe you are looking for
-
I have taken all the steps to verify my iCloud account but in Settings the "verifying" icon at the top of the page keeps spinning and never actually verifying the account
-
Hi, 9iR2 /AIX5 I'm wondering what is the status of db access during full export? How any user query will be influenced? We do export off business time, but it might be a case to export during the day. Should I put db in 'restrict' mode or not? What a
-
Hi, There was a sap script written in language DE(original language) , now i also have the same script in EN ,i have made some changes to the EN form. Now my program runs in many languages like JA,KO etc.. when i call the script i want it to call
-
OS X 10.9.5 file downloading and attaching issues
-
Find the missing date from output data
Hi Guys, For Ex, I have the following ouput rows with column like Id Name Mobile Signindate 1 AAA XXX 2012-03-01 2 AAA XXX 2012-03-02 3 AAA XXX 2012-03-05 4 AAA XXX 2012-03-06 5