Discount in kind indicator in material master

Hi,
where we found discount in kind indicator in material master. what is the functionality of this?
Regards
Rifaie

Hi
Check in purchasing view . MARA-NRFHG. Field name in the screen would be "Qual.f.FreeGoodsDis."
Material qualifies for discount in kind
Specifies whether and for what areas the material qualifies for a discount in kind.
Use
This indicator is presently used only in Purchasing.
Regards
Antony

Similar Messages

  • Removal of batch management indicator from material master

    I had removed all batch stock from material code but when trying to remove batch management indicator from material master system is giving the message "batches already exist"
    Please suggest the solution.

    Hi,
       The material is NEW and Batch Managed.  No stocks, orders, batches are existing.
       If the Batch Management indicator is removed in Material Master, is there any way *to see/track the batch/lot * of the product.
    Scenarios: Material is NOT Batch Managed
    1.     How to track a batch received for Purchase order.
    2.     How to track a Batch created in a Production order.
    3.     How to track a Batch in Sales Order.
    Thanks,
    VB

  • Spare part indicator in material master

    Hi Gurus,
    Where can i select spare part indicator in material master.
    regards
    Kaisar

    Hi Gurus,
    i have created a process order and did not do its confirmation, but did its delivery. After that, mistakenly 553 movement type was done by my colleque. To quality scrap. Now how could i get back the material to unrestricted. I tried with 554, but in this, all the compoents of the BOM are being issued thru 261.
    But thats not the requirement, i just want to reverse the header material to unrestricted.
    Please advice.
    regards
    Kaisar

  • How to Remove batch mangement indicator from Material Master

    Hi
    I am trying to remove batch mangement indicator from Material master..but system does not allow
    Before this .. I have done all activities also ...clear open SD documnets ,deliveriy documents ,PO documents ,Process order teco and . reservations and activae deletion flag in  batch  ... and made current period  stock an previous period  stock zero... i have cleard all documnets ...still system does not allow remove indicator..could you please guide in this issue ..how to remove batch indicator.
    Regards
    Sasi

    Hi,
    Please refer the below links.
    Re: untick Batch Manegement Indicator on Material Master
    Remove batch management flag and deletion of material documents
    How to remove Batch Management in the Material
    Re: How to remove Batch Management Check in the Material
    Thanks.

  • ABC Indicator of material master record

    Hi,
    Please explain about the ABC indicator of material master record, use and in which tab it is found?
    Regards,
    Ashish

    Hi,
    I found the answer.
    The ABC indicator is in MMC in MRP 1 tab.
    ABC Indicator classifies a material as an A, B, or C part according to its consumption value. This classification process is known as the ABC analysis.
    The three indicators have the following meanings:
    A - important part, high consumption value
    B - less important part, medium consumption value
    C - relatively unimportant part, low consumption value
    Regards,
    Ashish

  • Can not change the ABC indicator in Material master MRP1 View?

    Hi All,
    I could not change the ABC indicator in Material master for material X. Could some one please specify the condition or prerquisit for making chnages in ABC indicator?

    Hi Animesh,
    In Logistics Information system , ABC analysis can being done  and results updated in Material master for ABC indicator by background job run.
    The relevant transaction is MC40  ( Total Analysis) .
    This transaction when run in backgroung with field "Update ABC Ind.in background processing mode" clicked, will update the ABC indicator appropriately.
    You can find different criteria based on which A, B,C is decided.
    I hope this will be useful to you.
    Please check and confirm.
    Regards
    Datta

  • Batch Management Indicator Required - Material Master

    Hello,
    My requirement -
    Batch management field has to be required for material Type "FERT"
    1) I created a new field selection group for the field "batch management" (MARA-XCHPF)
    2) Created a new Field Reference group with "Required" entry (OMS9)
    3) Assigned the New Field Reference to the material Type in OMS2
    The batch management Field is now a mandatory field.
    Issue is, when we try to create only the basic Data Views of a FERT material, system does not allow to save the material untill the "Batch Management Indicator" is activated (even if we are not referencing to any plant specific views of the material master.)
    We need to have the the Batch management indicator a required entry for FERT, but at the same time should be able to create material master with basic data Field only (we would be extending the plant specific views later)
    Is there a alternative method to have this setting to meet the requirements above?
    Thanks

    Hi
    I think you can check if the batch level is defined on material or client now, if yes, you may check if that can be switched to plant level. As far as I knw the basic data is for client so the field is shown on basic data view and ask to input value as you customized.
    Alternatively, I think you can use the user exit MGA00001to check the field instead of the field selection, this is called when the material master get saved, then you can write your own source code to chec if the customer filled the  field only for certain situations.
    Best Regards.
    Leon.

  • Updation of ABC indicator in Material Master

    Hi,
    For ABC analysis, I carried out it according to T_code MC40(Usage value). I got the category of material. For eg "A".But how the ABC indicator updates in Material master.Because I couldnt get indicator in MRP1 view.
    Whats the right way? Pls guide me.
    Thanks,
    Goraksh.

    Hi,
    Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
    Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
    If it is the case, consumption is updated, opposite for un-ticked.
    Hope that helps.
    Thanks.

  • ABC indicator in Material Master

    Hi experts,
    Could you please let me know if the ABC indicator field used in MRP1 view is Plant dependant or Plant independant?
    We have 2 plants. So should we set this ABC indicator seperately for Plant 1 & Plant 2?
    Thanks,
    Pri

    ABC INDICATOR:
    Indicator that classifies a material as an A, B, or C part according to
    its consumption value. This classification process is known as the ABC
    analysis.
    The three indicators have the following meanings:
    o   A - important part, high consumption value
    o   B - less important part, medium consumption value
    o   C - relatively unimportant part, low consumption value
    So we can say that this information in Material master is plant specific (Plant dependent)
    Logically if we think the material which is of high importance and have high consumption in one plant need not have to be important with same level of consumption in another plant.
    Rerward if it is helpful
    Regards
    Pavan
    So when doing the bifercation of the materials based on their importance it is plant which is of utmost importance

  • Transparent table field for Tax Indicator on Material Master

    I am trying to find the transparent table which holds the Tax indicator field for material in the purchasing view of a material master. Usually it has values - 0,1. Where is this field stored ? I am unable to locate it. I looked into CDPOS..It points to DMLAN. But that is a structure..
    TAXIM is the field ( Tax Ind. f. Material). I need to retrieve this field for a report).

    Hi,
    The country is got based on the plant...you can get the country from T001W for the corresponding plant.
    Thanks
    Naren

  • "Material is configurable" indicator in material master record

    Hallo, SAP gurus!
    I have a problem:
    in my SAP system there is a material whose indicator "material is configurable" is set. Due to this I cannot hold calculations of this material on. How can I clear this indicator(it's grayed and I can't modify it)?
    I experimented with BOMs for this material and tried to create several BOMs and I managed as I understand. Probably this could influence setting "material is configurable" flag. Because I could hold calculations on this material before.
    Need help!
    Thanks!

    Hi
    firstly unlock the material in mm02--> basic data 1 you have a small lock on top along with additional data and other tabs when you click on that it will unlock and then you can change it also do get in to img - logistic general- material master--field selection--- define lock relevant keys
    here go to config management and material lock check the or uncheck the relevant fields
    thanks

  • SLED period indicator in Material master

    Hi
    I have maintained material master with Period indicator for SLED field as 'D' in plant general data storgae data.
    I wanted to change this to W. I wanted to know is it possible to change this and if yes please provide T Code for this.
    SK

    Dear,
    Follow the Tcode O02k...Here select the first line for Int.Period ..Make it Active and select this line and click on left hand side (Text for period indicator).
    Here in front of your language EN:Enter W in Ext.Period I field.
    Save and come out.
    Now when ever you create Material master...By default it will pick "W".
    Now coming to your existing materials for which you have already maintained "D".
    What you have to do is go to Tcode MM02...Under Plant data storage 1 view change the indicator from D to W.
    If number of materials are large then do it by mass maintenance in tcode MM17 or create LSMW program for it.
    This will def solve your problem.
    Regards
    Utsav

  • Discontinuation indicator in Material Master

    Hello,
    I am using discontinuation group concept in BOM which replace 1 old material with multiple folloup materials.
    My system ( ECC5.0) does not display discontinuation indicator 2 ( discontinue group in BOM). As a workaround I am using discontinue indicator 1 in material master, which makes entry of atleast 1 folloup material in material master mandatory.
    Does anyone know how to enable discontinue indicator 2 in material master?
    Thanks,
    Ram

    Hi,
    The indicator 2 is not offered either in BOM or material master. It works as below:
    Set the discontinuation indicator as 1 for the material to be discontinued in the material master along with other required details. Now in the BOM for the discontinued material, click on discontn & specify the follow-up group as say A1. Then specify follow-up group as A1 for materials which need to follow up this material.
    Create a planned order & explode the BOM in the planned order, you will then notice the indicator 2 for the material which you discontinued in the material master & in BOM.
    Hope it clarifies your query.
    Regards,
    Vivek
    Added
    Hi Bramhankar,
    Glad to note you're now the Mentor for this forum. Best wishes & hope your knowledge continues to enrich this forum....!!!
    Edited by: Vivek on Aug 5, 2009 8:43 AM

  • Price Control Indicator in Material Master Record (Accounting View1)

    Hi,
    Is there any way to make the Standard Price (S) or Moving Average Price (V) automatically SET in Material Master Record? So that everytime we create a material, there will be no need to enter which price we prefer.

    Hi,
    Go to OMS2. select material type- goto detail- Tick 'Price control Mandatory".
    Also if you maintain "ext pro allowed i,e,2" ,system will pick price control V automatically.
    For price control S, maintain Int proc allowed as 2.
    Regards,
    Piyush
    Edited by: Piyush Mishra on Jul 20, 2010 9:06 AM

  • Storage type indicator in material master

    For a combination of a particaular plant+WH no, a material can have ONLY ONE storage type indicator defined..is it correct?
    What if I need multiple storage type indicator for a specific plant+WH combination.
    Regards.

    >
    Prajith KP wrote:
    > For a combination of a particaular plant+WH no, a material can have ONLY ONE storage type indicator defined..is it correct?
    >
    > What if I need multiple storage type indicator for a specific plant+WH combination.
    >
    > Regards.
    You can have multiple storage type indicators for a warehouse. However for a particular material, only one storage type indicator may be used for picking and putaway.
    You would normally require storage type indicators for different search strategies. You may use an exit for the strategy.
    Regards,
    Aroop

Maybe you are looking for

  • How do I create an Array of Images

    Hi, I'm creating a program that basically is a slideshow. It has buttons that allow the user to switch from image to image, and has some audio in the background. I was wondering how I might create an array to store the images. I'm very new to Java, s

  • International Wikis (2010 edition)

    So, there were some discussion about how to handle internationalization in the past. Some things have changed and we have a lot more experience. So I think it's worth to review the situation and our plans. We finally have a simple but well working in

  • Kernal Panic - Video related?

    Hey everybody, I am running OSX 10.7.5 on my MB404LL Macbook. I've only owned the machine for a few weeks but I am getting a kernal panic once or twice a week when I open the computer from sleep. I ran the thorough Apple hardware test (took about an

  • Microsoft product key on windows 7 ultimate

    hi, i have recently downloaded and installed windows 7 ultimate from an iso image, is there someplace that i can buy a product key to validate the copy. (i am using windows 7 ultimate) i have already tried the microsoft webside but it just gives me l

  • HT1766 I have a corrupted backup. where is my backup stored?

    I'm trying to back up my iphone, but an error screen appears and tells me to delete the previous back up and try it again.  Where is the iphone backup on the disk?