[Discover] Discover queue and voiting

Discover feature and spotify recommendation is one of the best thing I found in this application.I've noticed spotify replace me all recommenced songs around every week. And here is the first problem , sometimes i dind't had enough time to listen all songs. So I would like to have some queue. Of course now you might thing that, recommendation musinc is generated based on what I listen. so there is not point to show some old history reconnection if I started to listened other category. I thing there should be a way to go to the recommendations history or just don't remove from a week before only add for current week.The second this is that there should be voting button for each song you recommend me, to improve the algorithm settings you apply for recommendation .

CONGRATS on your success with Discover chat!!!

Similar Messages

MSMQ workgroup issues discovering queues

I have a problem discovering queues in workgroup servers.
The technical information:
WIndows 2008 R2
MSMQ 5.0
MP MSMQ 2008R2
When I try to discover queues the user discovering it (execute script) is WORKGROUP\xxxxx. I test to use "Local System" "Network Service", runas account.... but didn't work.
The script Discoverqueues.vbs fails with "left".
I found this threath but I don't understand how is be able to use fqdn in a workgroup server.
http://social.technet.microsoft.com/Forums/en-US/8930cfee-6a7f-43e7-aa19-a20ea634c736/fix-a-bug-in-a-management-pack?forum=operationsmanagermgmtpacks
I discard the solution to unsealed MP and reconfigure script.
Can anybody help me?
Thanks a lot.

Hi,
Please check if the following post is helpful.
http://social.technet.microsoft.com/Forums/en-US/8b345a05-c3d7-422b-801c-e207e26ae601/msmq-discovering-queues
Niki Han
TechNet Community Support

HT4113 What is a verification code? How can I discover where and what it is?

What is a verification code? How can I discover where and what it is?

Read through this: http://support.apple.com/kb/ht5570

I bought ipad 2 wifi and discovered wifi and 3G will be better since wifi coverage are not everywhere. Is there anything i can do to make it 3G compatible?

i bought ipad 2 wifi and discovered wifi and 3G will be better since wifi coverage are not everywhere. Is there anything i can do to make it 3G compatible?

No.
You cannot add 3G to the device itself.
You have a 14(?) day return period to swap it out.
You can get a device called a mifi, it's available on several carriers.

Configure backout queue and Dead letter queue in weblogic JMS provider

Hi,
How to configure the JMS backout queue and dead letter queue in weblogic JMS provider in weblogic application server console?
Any links or documents are highly appreciated.
Thanks.

Thanks anon. When i say backout message the poisonous message , A poison message is one which cannot be processed by a receiving MDB application. If a poison message is encountered, the JMS MessageConsumer and ConnectionConsumer objects can requeue it according to two queue properties, BOQUEUE, and BOTHRESH.
Normally this happens in the websphere MQ . Where we will configure the backout queue and dead letter queue.
The dead letter queue was always used in MQSeries (the last time I used MQ) to store messages that arrived at the queue manager but the queue didn't exist. For eample, if the message was address to queue manager X and queue Y, it would arrive via a channel at manager X. If the receiver channel discovered there was no queue Y, it would be placed in the dead letter queue.
The backout queue, on the other hand, is more of an application-level thing (at least in terms of MQ). When an MQ client cannot process the message for some reason, it can back it out for later processing (back to it's original queue).If it's backed out too many times (the threshold can be configured), it gets moved to the backout queue.
The Dead Letter Queue behaves the same as a Backout. I treat the Dead Letter Queue as the Crematorium for messages that cannot be recovered in the Error or Backout queues and have some last, non-business specific data that need be collected. Once the info is captured, the message is put down for good. Backout is good for analyzing messages for data that may need to be recovered to completely reprocess or be sent back to an application area for them to decision on.
How we configure these in weblogic server both Backout and Deadletter queue , whether this is a simple queue in which we will set the error destination in case of any poisonous message so that it will logged in those queue?
Thanks.

Jobs stay in queue and keep printing until you cancel them--then stops the print spooler...why?

My Printer: HP Photosmart C309a
My Laptop: HP G71 series
Operating System: Windows 7 (64 bit) but runs a lot of stuff on 32 bit
Problem: I print ONE copy of a multiple page document in Adobe Reader 9. I select even pages only (after which I would reinsert the pages and tell it to print odd pages only, to get the other side). The printer makes a sound indicating the job is finished, I remove my pages to collate them, and then the printer continues to print the job again without so much as a keystroke.
Naturally, you find the printer in the devices on the control panel, click "see what's printing" and highlight the job and cancel it.
Then somehow it turns off my print spooler.
I have tried everything suggested on other forums, like
restart the laptop/restart the printer
going to c\windows\system32\spool\printers and deleting whatever is hung up in there (usually a shockwave file).
Going to Services\print spooler \properties and making sure the settings are set to automatic
Uninstall\reinstall latest driver and software
Switching from Adobe Reader 10 to Adobe Reader 9
Use System Restore to try to reset the system to a previous state.
Run Trend Micro to check for viruses and spyware--nothing shows up.
I am positive the pdf doc is NOT the problem, because I can print it on my husband's laptop multiple times over with no problems.
Does anyone have this problem as well? Has anyone found a genuine solution other than manually canceling print jobs in queue and constantly restarting the print spooler?
Thanks in advance for any suggestions.
--Holly

Hi,
I believe your printer is wirelessly connected to your computer, right?!
What's the current printer software version installed in your laptop computer?!
to see: click start>control panel>uninstall a program under Programs then it will tell you the software version like HP Photosmart c309a v13 or v14.
If the software version is v13, click here to download and install the current software.
IF all things still fail, try to use the workaround provided by HP in this link. It says:
Workaround
Your HP printing product can operate sufficiently using an alternate print driver, although there might be some limitations. For instance, some buttons on the product control panel might not function, but the product prints normally from the computer. If the solutions in this document do not solve the issue, download and install an alternate print driver.
Follow these steps to install the HP Deskjet 990C print driver.
NOTE: These steps install the new print driver using the same port that the product already uses. The product functions normally with multiple drivers on the same port.
Find the port that the product already uses.
Click the Windows icon ( ), and then click Control Panel . The Control Panel opens in a new window.
Click Hardware and Sounds .
Click Printers . The Printers folder opens.
Right-click the product icon ( ), and then click Properties . The Propertieswindow opens.
Click the Ports tab. A window opens with a list of ports. The port for the product has a checkmark or a highlight.
Note the name of the port indicated for the product.
Close the Properties window, and then continue with the next steps.
Click Add a Printer in the menu bar at the top of the Printers window. The Windows Add Printer Wizard opens.
Click Add a local printer .
Select Use an existing Port .
Click the drop-down menu next to Use an existing Port , and then select the port that you noted earlier in these steps.
Click Next .
In the Manufacturer pane, click HP .
In the Printers pane, click HP Deskjet 990c , and then click Next . (IF YOU CANT FIND DESKJET 990C, JUST CLICK WINDOWS UPDATE WITHIN THIS WINDOW. THEN FIND DESKJET 990C and then click next)
Type a name for the new printer in the Printer name box, or keep the default name.
Select Set as the default printer , and then click Next . A window opens with a progress bar as the printer installs. Then a new window opens.
Click Do not share this printer , and then click Next .
If you want to print a test page, click the Print test page button.
Click Finish to complete the driver installation.
Try printing again, but select HP Deskjet 990c from the Print dialog box.
If this solves the issue, follow these steps to use the HP Deskjet 990c print driver whenever you send print jobs to the product.
In the program you are using, select the option to print. The Print dialog box opens.
Click the Name drop-down menu, and then select HP Deskjet 990c .
Change print settings as desired in the Paper size , Quality , and Paper type drop-down menus.
Select the Print range and Copies options as desired.
Click OK . The product prints the file.
Kiko

How to delete the data in update queue and delta queue for Queued delta?

Dear BWers,
How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
Thanks
Raj

Hi Raj,
I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance.
Please let me know if these material has been suffecient enough.
regarda,
raj

Is it possible to wait on a queue and on a notifier at the same time?

Hi!
I am trying to implement an event-driven producer/consumer pattern with queues. The problem is that I have some value change events (e.g. coming from a slider) that I do not want to queue up; I want only the latest value change event to be processed by the consumer loop. This is because the consumer may spend longer time in executing (sometimes multiple seconds) and I want to prevent all intermediate slider events to be queued up in the meantime because I will finally write them to hardware. Therefore, a notifier would be better to use here than a queue. My question is if it is possible to make the same consumer loop wait on the queue as well as on the notifier at the same time? I will be wiring the VISA session and some other data through the consumer, so it want to avoid an extra loop that would wait on the notifier only. Or is there any other possible workaround?
Thanks in advance.
Regards,
Anguel
Solved!
Go to Solution.

AStankov wrote:
crossrulz, many thanks for the code example and this is probably exactly what Mark suggested. Unfortunately, I do not really understand the logic behind it, i.e. why wait on the queue and then on the notifier?
It isn't really waiting on the notifier. The wait is set to 0. So if there is no new data in the notifier, instant timeout and skip the DAQ stuff.
The idea here is to send the set value (from the slider) through the notifier and send the command through the queue. When the consumer loop gets the command, it will read the notifier for the latest data point and go to work. Now if the user changes a bunch of stuff while a "long" acquisistion is happening, the notifier will keep being overwritten; it will only keep the last commanded value. The queue will get multiple commands, but only the last value will be worked on due to the notifier. The remaining commands will check the notifier, see that there's no new data, and skip to the next command.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Reading Opaque data from jms queue and decoded in java embedding

Hi ,
Objective:Fetch text message from queue and print it from java embedding in BPEL
I am fetching text message from a jms queue using JMS adapter in BPEL.Then converting the opaque data(Base64 binary)to string using java embedding.My build got successful but I am getting runtime error at the time of deployment.
I have added fabric-runtime.jar file into SCA-INF\lib folder as well as project library directory.
<extensionActivity>
<bpelx:exec name="Java_Embedding1" version="1.5" language="java">
<bpelx:exec import="java.io.*"/>
<bpelx:exec import="oracle.soa.common.util.Base64Decoder"/>
<![CDATA[//Write your java code below e.g.
     System.out.println("Hello, World");
//   String input = ((Element)getVariableData("Receive1_Consume_Message_InputVariable")).getTextContent();
// String inputName = (String)getVariableData("input");
String input = (String)getVariableData("Receive1_Consume_Message_InputVariable");
//Receive1_Consume_Message_InputVariable.opaque
      System.out.println("input:"+input);
      addAuditTrailEntry(input);
      Base64Decoder Decoder = new Base64Decoder();
     try {
      String decoded = Base64Decoder.decode(input);
      setVariableData("Variable_opaque_decoded",decoded);
      addAuditTrailEntry(decoded);
catch(UnsupportedEncodingException uee)
uee.printStackTrace();
}]]>
</bpelx:exec>
</extensionActivity>
Error:
Error deploying archive sca_JMSToDBInsert_rev1.0.jar to partition "default" on server AdminServer [http://localhost:7001]
HTTP error code returned [500]
Error message from server:
There was an error deploying the composite on AdminServer: Error occurred during deployment of component: BPELProcess1 to service engine: implementation.bpel, for composite: JMSToDBInsert: ORABPEL-05250
Error deploying BPEL suitcase.
error while attempting to deploy the BPEL component file "C:\Oracle\Middleware\user_projects\domains\soa_domain\servers\AdminServer\dc\soa_0fb06e23-bac3-4753-aae9-0fc4b54b4dd1"; the exception reported is: java.lang.RuntimeException: failed to compile execlets of BPELProcess1
This error contained an exception thrown by the underlying deployment module.
Verify the exception trace in the log (with logging level set to debug mode).
Check server log for more details.
Error deploying archive sca_JMSToDBInsert_rev1.0.jar to partition "default" on server AdminServer [http://localhost:7001]
#### Deployment incomplete. ####
Error deploying archive file:/C:/SOA Suite/SOA_POC/Client2JMSapps/Client2JMSapps/JMSToDBInsert/deploy/sca_JMSToDBInsert_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Could you guys please help me regarding this?
Thanks & Regards,
Souvik
Edited by: Souvik Pal on Apr 16, 2012 9:40 PM

You probably want to try the SOA Suite forum for OSB questions.
SOA Suite
There is an excellent book also:
http://jeffdavies.org/
The documentation goes over the fundamentals, but the book will be better for step by step examples.

Officejet Pro 8600 Wireless Setup -Printing shows in Queue and then disappears. Not Printing

I just received the Officejet Pro 8600 as a gift and loaded the set up software and it on my wireless network. When I try to print an email or a coupon, the command goes to the printer and shows in the queue. Then after several seconds, the printing queue (job) disappears without printing the document. Does this command go through the HP ePrint function or the Network Officejet Pro 8600? It shows the HP ePrint as being on USB.
I've run all of the diagnostics, downloaded all of the new software, firmware and updates. I've spend many hours trying to get the printer to print.
Thank you for any help you can provide.
This question was solved.
View Solution.

Hi @bksechols
Welcome to the HP Support Forums. I understand that when you send a print job to your Officejet 8600 printer that it goes to the print queue and then disappears without the print job printing.
To better assist you, would you please provide some additional information?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using?
Are all print jobs failing? If yes and you are using a Windows operating system, please Try the HP Print and Scan Doctor for Windows. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues.
When you send a print job are emailing the printer’s ePrint email address? If so please review The HP ePrint Print Job Did Not Print If you are sending the print job by using the print command, please review the Print Jobs from Your HP Printer are Stuck in the Print Queue document.
I look forward to hearing from you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

MS Exchange server 2010 messages will be placed in the poison queue and the transport service will crash

Can any1 please help.
We have Exchange server 2010, we just upgraded it with SP3 and then the issue occers that we were unable to send n receive mail outside of our LAN...i mean from gmail or hotmail..
we have then updated with CU4 which is the latest but still messages will be placed in the poison queue and the transport service will crash.
We have disabled the antivirus also but issue remains same.
We have CAS 1 n 2 as of Clustering environment and we upgraded sp3 for both. but we did CU4 on CAS1 to see the results to resovle this issue but no luck

Hi,
Did you get any NDR message now when you send a email to outside? And vice versa.
In addtion,I recommend you telnet to port 25 to test SMTP communication.
If any question,please feel free to post here.
Thanks.
Niko Cheng
TechNet Community Support

Parallel process with a queue and file?

Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
Attachments:
Queue_Data_Parallel_FORUM.vi ‏23 KB

LapLapLap wrote:
Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
A queue is technically never parallell, though you can have several if you really need parallellism. Other methods include Events, Action Engines, Notifiers (and why not webservices) for information transfer between processes.
Due to limitations in the disk system you can only read/write one file at a time from one process, so i wouldn't recommend that. If you use a ramdisk it might work.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Issue with Distributed Queue and WebLogic Clustering

Hi, When a message is received by distributed queue, MDB is processing the message on two managed servers. There seems to be issue with clustering and the physical queues present on both the managed servers are receving the message.
Our environment configuration details are as below:
One Web logic Cluster with 2 nodes (2 managed web logic servers).
One MDB deployed on the cluster listening to a queue with JNDI name “xng/jms/CODEventsQueue”
One Distributed queue with two members on the two nodes of the cluster, and with JNDI name “xng/jms/CODEventsQueue”
Two members of the distributed queue deployed on two JMS servers, which are separately deployed on each managed server .
And the distributed queue is deployed on the cluster.
Any help is appreciated.
Thanks
Sampath

It is not clear to me how you concluded that "both the managed servers are receiving the message". Did you monitor the queues' statistics, or did you see both MDB instances received the same message?
It looks like that you using a weighted distributed queue. Do the two physical queues that compose the distributed queue have their own JNDI names? If so, what are they?
Have you tried to use a uniform distributed queue and see if the same behavior shows up?
You can find more about uniform distributed destination at
http://edocs.bea.com/wls/docs103/jms/dds.html#wp1313713
BTW, which WebLogic Server releases are you using? Could you provide the distributed queue configuration?
Thanks,
Dongbo

Queues and notifiers - please help?!

Can someone explain to me how to effectively utilize queues and notifiers? I understand the fundamental difference between the two but I am having a difficult time establishing when I should use one over the other or how to utilize both of them at the same time.
Essentially what I currently have is a master loop that contains (among other things) an event structure. The event structure contains controls which dictate when notifiers are sent and destroyed. The notifiers “turn on” other loops (all within the same sequence frame as the master loop). These other loops are used for various controls, data logging, etc. Within some of these “sub-loops” I would like to step through a sequence of events – this is where I’m having trouble.
Here is what I would like to happen: When the user clicks a certain button, a notifier is sent to sub-loop-A and it begins to run. The user then selects from a pull-down menu one of a few different options. Depending on the option selected, a specific set of events occur (whose progress is dictated by both user interaction (pressing buttons) and successful events (data being fed back). I would then like the sequence to “reset” and allow the user to select another option from the same menu – I don’t want to exit all the way back out to the main loop and force the user to re-select sub-loop-A again. However, if from the front panel the user selects sub-loop-B I would like sub-loop-A to exit and sub-loop-B to begin running. I have attached a sample of the basic layout I have so far (in LV 8.2) – I apologize in advance – I’m still learning labVIEW and I’m probably not going about this in the most efficient manner.
A couple other things to note – I’m trying avoid polling because speed is important. Also, the template I’ve attached is far from complete – it will require additional sub-loops and additional sequence loops (which I have been advised to use que-based state machines - which I'm also not familiar with).
Any assistance you guys can provide would be great – examples, web links, etc.
Thanks again!
-Erik
Attachments:
LayoutExample.vi ‏72 KB

I do see a problem in the operation in that if I hit the stop button, the inner loop of auto starts running like crazy. I think it is because if the wait for notifier returns an error due to it getting destroyed when the stop button is hit, it still sends out the notifier as the default, which starts the default case structure operating and thus its inner loops. And they don't stop.
You should probably get the loops out of the default case. Any case structure should have a default case that does nothing.
A better practice would be in the stop button case, send out a notifier that is for a specific exit case that tells all outer loops to stop. Then destroy the notifiers.
In your 4 loops, you have the stop button NOR'ed with the other condition rather than OR'd. So if you say stop = true, the OR results in a True, but the negation turns that into False and the loop does not stop. In the top button, you had the enum compared to exit, then that was NOT so the loop would stop immediately if the enum was anything but Exit. Because the Boolean logic in these loops was convoluted, I think the loops weren't behaving the way they should.
I made some modifications to clean up the default case and the boolean stop loop logic in each of the loops. See attached.
Attachments:
MultipleLoopsV82 MOD.vi ‏90 KB

UCCX Queues showing bogus calls in Queue and they will not clear

I have many queues and two of them show one call in each of the queues on the supervisor desktop. However there is not any call in the queue. How do I clear theses calls/stats on the supervisor desktop for the end user so it does not show bogus calls on the queue on her clent?

Hi Jonathan ,
What is your UCCX version .
Looking at the problem description i am suspecting that your system is hitting BUG:-CSCsu40814
BUG:-CSCsu40814
Symptom:
The supervisor desktop realtime reports will show an entry in "Oldest in Queue" that appears to be a call in the queue but has no time associated with it. The issue will show as 1(00:00:00)
Conditions:
So far the only condition that exists is that calls are coming into the system.
Workaround:
None
Further Problem Description:
The system RealTime Reports does not reflect this call and it is only shown in the Supervisor Desktop display. There is not actually a call in queue as well and it seems to be a reporting error.
The defect can be explained as follows:
++         This happens because of any of the unsupported configurations/actions for UCCX.
++         This will lead the UCCX engine not to clear the entry of the call internally and thus it will send messages to the CSD to display the call.
++      Ideally when you have a legitimate call: "1[00:20:00]", this means that there is 1 call in the queue for 20min. However, 2[00:00:00] means that this call is no longer in the queue, but there is a false entry of the same.
++         Therefore, the restart of the engine will remove these entries
++         This entry will be created in the UCCX engine when an unsupported action is performed such as transfer to a different Route point etc. (not necessarily this).
++         The defect addresses how such a call is handled so that the call entry can be appropriately cleared.
++         It would be difficult to say why the issue started to occur, but we can explain as to why the entries are seen on CSD and how we can clear them.
Please note the following:
++        All unsupported scenarios/configurations mentioned in the guide have to be avoided:
o   http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/release/notes/uccx_802_rn.pdf
++         All the unsupported configurations can cause this issue to occur. However, the defect-fix has been verified for the following configurations:
1.       When an agent on call c1 initiates consult c2 to the RP,cti port, c2 is just in the process of getting queued when agent completes transfer and so c1.iaqstate is set incorrectly to NOT_IN_QUEUE due to a race condition. The defect CSCsu40814 occurs even in regular, supported agent to rp transfer scenarios due to race condition.
2.       As soon as the agent went reserved for the primary consult , he answered the primary consult but even before the main call could be fully transferred to the agent, He held the primary consult call and initiated a new call to the RP. This is what caused the main IAQ call to terminate. And he was left only with the new call he initiated. So he again initiates another consult and completes transfer.So the agent wanted to answer the PRIMARY consult and immediately transfer it back to the RP without talking to the caller.In this particular scenario, the call was between 2 CTI ports
Issue can be resolved by restarting the CCX engine(in off hours). This is a temp workaround .
you need to check if agent's are not using any unsupported configuration .

[Discover] Discover queue and voiting

Similar Messages

Maybe you are looking for